Yamaha YST-MS28 User Manual

0 (0)
Yamaha YST-MS28 User Manual

UCA

POWERED MULTIMEDIA SPEAKERS

YST-MS28

Active Servo

Technology

OWNER’S MANUAL / MODE D’EMPLOI

Active Servo

Technology

POWERED MULTIMEDIA SPEAKERS YST-MS28

BASS

0

10

English......................

1

Français ....................

4

VO

LU

ME

 

 

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT!

Please record the serial number of this unit in the space below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future reference.

SAFETY INSTRUCTIONS

1Read Instructions — All the safety and operating instructions should be read before the unit is operated.

2Retain Instructions — The safety and operating instructions should be retained for future reference.

3Heed Warnings — All warnings on the unit and in the operating instructions should be adhered to.

4Follow Instructions — All operating and other instructions should be followed.

5Water and Moisture — The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6Carts and Stands — The unit should be used only with a cart or stand that is recommended by the manufacturer.

6A An unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.

7Wall or Ceiling Mounting — The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

8Ventilation — The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9Heat — The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.

10Power Sources — The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit.

11Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

12Cleaning — The unit should be cleaned only as recommended by the manufacturer.

13Nonuse Periods — The power cord of the unit should be unplugged from the outlet when left unused for a long period of time.

14Object and Liquid Entry — Care should be taken so that objects do not fall into and liquids are not spilled into the inside of unit.

15Damage Requiring Service — The unit should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the unit; or

C.The unit has been exposed to rain; or

D.The unit does not appear to operate normally or exhibits a marked change in performance; or

E.The unit has been dropped, or the enclosure damaged.

16Servicing — The user should not attempt service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.

17Power Lines — An outdoor antenna should be located away from power lines.

i

18 Grounding or Polarization — Precautions should be taken so that the grounding or polarization is not defeated.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

Compliance with FCC regulations does not guarantee that

UNIT! This product, when installed as indicated in the

interference will not occur in all installations. If this product

instructions contained in this manual, meets FCC require-

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

ments. Modifications not expressly approved by Yamaha

to eliminate the problem by using one of the following

may void your authority, granted by the FCC, to use the

measures:

product.

 

2. IMPORTANT: When connecting this product to accesso-

Relocate either this product or the device that is being

affected by the interference.

ries and/or another product use only high quality shielded

 

cables. Cable/s supplied with this product MUST be used.

Utilize power outlets that are on different branch (circuit

Follow all installation instructions. Failure to follow instruc-

breaker of fuse) circuits or install AC line filter/s.

tions could void your FCC authorization to use this product

In the case of radio or TV interference, relocate/reorient

in the USA.

the antenna. If the antenna lead-in is 300 ohm ribbon lead,

3. NOTE: This product has been tested and found to comply

change the lead-in to coaxial type cable.

with the requirements listed in FCC Regulations, Part 15 for

If these corrective measures do not produce satisfactory

Class “B” digital devices. Compliance with these require-

results, please contact the local retailer authorized to dis-

ments provides a reasonable level of assurance that your

tribute this type of product. If you can not locate the appro-

use of this product in a residential environment will not result

priate retailer, please contact Yamaha Corporation of

in harmful interference with other electronic devices.

America, 6600 Orangethorpe Ave, Buena Park, CA 90620

 

 

This equipment generates/uses radio frequencies and, if not

The above statement apply ONLY to those products dis-

installed and used according to the instructions found in the

tributed by Yamaha Corporation of America or its subsid-

users manual, may cause interference harmful to the opera-

iaries.

tion of other electronic devices.

 

 

 

 

 

 

 

FOR CANADIAN CUSTOMERS

 

 

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

 

 

OF PLUG TO WIDE SLOT AND FULLY INSERT.

 

 

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

 

 

CANADIAN ICES-003.

 

 

POUR LES CONSOMMATEURS CANADIENS

 

 

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRO-

 

 

DUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

 

 

BORNE CORRESPONDANTE DE LA PRISE ET

 

 

POUSSER JUSQU’AU FOND.

 

 

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST

 

 

CONFORME À LA NORME NMB-003 DU CANADA.

 

 

 

 

 

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged

exposure from excessive volume levels.

ii

Loading...
+ 4 hidden pages