Loading...
POWERED SPEAKER SYSTEM
DXRmkII series
|
|
Owner’s Manual |
|
|
|
|
|
|
|
Bedienungsanleitung |
|
|
|
|
|
|
|
Mode d’emploi |
|
EN |
|||
|
|
||
|
Manual de instrucciones |
||
DE |
|
||
|
|
||
FR |
|
|
|
|
Manual do Proprietário |
||
ES |
|
|
|
|
Manuale di istruzioni |
||
PT |
|
||
|
|
||
|
|
Руководство пользователя |
|
IT |
|||
RU |
|
|
|
|
|
||
ZH |
|
|
|
|
|
||
JA |
|
||
|
|
||
|
|
|
Italiano Português Español Français Deutsch English
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The above warning is located on the rear of the unit.
ATTENTION
RISQUE DE CHOC
ELECTRIQUE-NE PAS OUVRIR
ATTENTION :
POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION, FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.
L’avertissement ci-dessus est situé sur l’arrière de l’unité.
Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5 Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11Only use attachments/accessories specified by the manufacturer.
12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)
PRÉCAUTIONS CONCERNANT LA SÉCURITÉ
1 Lire ces instructions.
2Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4Suivre toutes les instructions.
5Ne pas utiliser ce produit à proximité d’eau.
6Nettoyer uniquement avec un chiffon propre et sec.
7Ne pas bloquer les orifices de ventilation. Installer l’appareil conformément aux instructions du fabricant.
8Ne pas installer l’appareil à proximité d’une source de chaleur comme un radiateur, une bouche de chaleur, un poêle ou tout autre appareil (y compris un amplificateur) produisant de la chaleur.
9Ne pas modifier le système de sécurité de la fiche polarisée ou de la fiche de terre. Une fiche polarisée dispose de deux broches dont une est plus large que l’autre. Une fiche de terre dispose de deux broches et d’une troisième pour le raccordement à la terre. Cette broche plus large ou cette troisième broche est destinée à assurer la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible avec les prises de courant disponibles, faire remplacer les prises par un électricien.
10Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas piétinés ni coincés, en faisant tout spécialement attention aux fiches, prises de courant et au point de sortie de l’appareil.
11Utiliser exclusivement les fixations et accessoires spécifiés par le fabricant.
12Utiliser exclusivement le chariot, le stand, le trépied,
le support ou la table recommandés par le fabricant ou vendus avec cet appareil. Si l’appareil est posé sur un chariot, déplacer le chariot avec précaution pour éviter tout risque de chute et de blessure.
13 Débrancher l’appareil en cas d’orage ou lorsqu’il doit rester hors service pendant une période prolongée.
14Confier toute réparation à un personnel qualifié. Faire réparer l’appareil s’il a subi tout dommage, par exemple si la fiche ou le cordon d’alimentation est endommagé, si du liquide a coulé ou des objets sont tombés à l’intérieur de l’appareil, si l’appareil a été exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas normalement ou est tombé.
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ.
(UL60065_03)
2DXRmkII series Owner’s Manual
FCC INFORMATION (U.S.A.) |
||
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! |
that interference will not occur in all installations. If this product |
|
This product, when installed as indicated in the instructions con- |
is found to be the source of interference, which can be deter- |
|
tained in this manual, meets FCC requirements. Modifications |
mined by turning the unit “OFF” and “ON”, please try to elimi- |
|
not expressly approved by Yamaha may void your authority, |
nate the problem by using one of the following measures: |
|
granted by the FCC, to use the product. |
Relocate either this product or the device that is being affected |
|
2. IMPORTANT: When connecting this product to accessories |
||
by the interference. |
||
and/or another product use only high quality shielded cables. |
Utilize power outlets that are on different branch (circuit breaker |
|
Cable/s supplied with this product MUST be used. Follow all |
||
or fuse) circuits or install AC line filter/s. |
||
installation instructions. Failure to follow instructions could void |
||
|
||
your FCC authorization to use this product in the USA. |
In the case of radio or TV interference, relocate/reorient the |
|
3. NOTE: This product has been tested and found to comply with |
antenna. If the antenna lead-in is 300 ohm ribbon lead, change |
|
the lead-in to co-axial type cable. |
||
the requirements listed in FCC Regulations, Part 15 for Class |
||
|
||
“B” digital devices. Compliance with these requirements pro- |
If these corrective measures do not produce satisfactory results, |
|
vides a reasonable level of assurance that your use of this prod- |
please contact the local retailer authorized to distribute this type |
|
uct in a residential environment will not result in harmful |
of product. If you can not locate the appropriate retailer, please |
|
interference with other electronic devices. This equipment gen- |
contact Yamaha Corporation of America, Electronic Service |
|
erates/uses radio frequencies and, if not installed and used |
Division, 6600 Orangethorpe Ave, Buena Park, CA90620 |
|
according to the instructions found in the users manual, may |
The above statements apply ONLY to those products distributed |
|
cause interference harmful to the operation of other electronic |
||
by Yamaha Corporation of America or its subsidiaries. |
||
devices. Compliance with FCC regulations does not guarantee |
||
|
||
|
|
|
* This applies only to products distributed by Yamaha Corporation of America. |
(class B) |
|
COMPLIANCE INFORMATION STATEMENT (Supplierʼs declaration of conformity procedure)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Powered Speaker System
Model Name : DXR15mkII, DXR12mkII, DXR10mkII, DXR8mkII
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and
2)this device must accept any interference received including interference that may cause undesired operation.
* This applies only to products distributed by |
(FCC SDoC) |
Yamaha Corporation of America. |
|
DXRmkII series Owner’s Manual |
3 |
|
|
English
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
This powered speaker system is designed for PA use. Do not use for any purposes other than the one intended. Those who are unfamiliar with handling or those who can not handle according to this manual such as children, should be supervised by responsible persons to ensure safety.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
If you notice any abnormality
•If any of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet.
-The power cord or plug becomes frayed or damaged.
-Unusual smells or smoke are emitted.
-Some object, or water has been dropped into the product.
-There is a sudden loss of sound during use of the product.
-Cracks or other visible damage appear on the product. Then have the product inspected or repaired by qualified Yamaha service personnel.
PA_en_11 1/2
•Be sure to connect to an appropriate outlet with a protective grounding connection. Improper grounding can result in electrical shock, fire, or damage.
Do not open
•This product contains no user-serviceable parts. Do not attempt to disassemble the internal parts or modify them in any way.
Water warning/Fire warning
•Do not expose the product to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings.
•Never insert or remove an electric plug with wet hands.
•Do not place any burning items or open flames near the product, since they may cause a fire.
Hearing loss
•Before turning the power of all devices on or off, make sure that all volume levels are set to the minimum. Failing to do so may result in hearing loss, electric shock, or device damage.
•When turning on the AC power in your audio system, always turn on the product LAST, to avoid hearing loss and speaker damage. When turning the power off, the product should be turned off FIRST for the same reason.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others. These precautions include, but are not limited to, the following:
Power supply/Power cord
•Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
•Only use the voltage specified as correct for the product. The required voltage is printed on the name plate of the product.
•Use only the supplied power cord/plug.
If you intend to use the product in an area other than in the one you purchased, the included power cord may not be compatible. Please check with your Yamaha dealer.
•Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
•Make sure to fully insert the electric plug to prevent electric shocks or fire.
•When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, as long as the power cord is not unplugged from the wall AC outlet, the product will not be disconnected from the power source.
•Remove the electric plug from the outlet when the product is not to be used for extended periods of time.
•Do not touch the product or the electric plug during an electrical storm.
Power supply/Power cord
•When removing the electric plug from the product or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.
Location and connection
•Do not place the product in an unstable position or a location with excessive vibration, where it might accidentally fall over and cause injury.
•Keep the device out of reach of children. This product is not suitable for use in locations where children are likely to be present.
•Do not block the vents. This product has ventilation holes at the rear to prevent the internal temperature from becoming too high. In particular, do not place the product on its side or upside down. Inadequate ventilation can result in overheating, possibly causing damage to the product(s), or even fire.
•When attempting to dissipate heat on the product, when installing it, do not use the product in a confined, poorlyventilated location.
Inadequate ventilation can result in overheating, possibly causing damage to the product(s), or even fire. Make sure that there is adequate space around the product: at least 30cm above, 30cm at the sides and 30cm behind.
•Do not place the product in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction.
4DXRmkII series Owner’s Manual
•Before moving the product, remove all connected cables.
•When transporting or moving DXR15mkII, always use two or more people. Attempting to lift the product by yourself may damage your back, result in other injury, or cause damage to the product itself.
•Do not use the speaker’s handles for suspended installation. Doing so can result in damage or injury.
•Do not hold the bottom of the product when transporting or moving it. In doing so, you may pinch your hands under the product, and result in injury.
•Do not press the rear panel of the product against the wall. Doing so may cause the plug to come in contact with the wall and detach from the power cord, resulting in short circuiting, malfunction, or even fire.
•Always consult qualified Yamaha service personnel if the product installation requires construction work.
Improper installation might cause accidents, injuries, damage or malfunction of this product.
Maintenance
•Remove the power plug from the AC outlet when cleaning the product.
Handling caution
•Do not rest your weight on the product or place heavy objects on it.
•Do not operate the product if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire.
PA_en_11 2/2
NOTICE
To avoid the possibility of malfunction/ damage to the product, or damage to other property, follow the notices below.
Handling and maintenance
•Do not use the product in the vicinity of a TV, radio, or other electric products. Otherwise, the product, TV, or radio may generate noise.
•Do not expose the product to excessive dust or vibration, or extreme cold or heat, in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components.
•Do not install in locations where temperature changes are severe. Otherwise, condensation may form on the inside or the surface of the product, causing it to break.
•If there is reason to believe that condensation might have occurred, leave the product for several hours without turning on the power until the condensation has completely dried out, in order to prevent possible damage.
•Do not place vinyl, plastic or rubber objects on the product, since this might cause alteration or discoloration of the panel.
•When cleaning the product, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths, since this might cause alteration or discoloration.
Information
About functions/data bundled with the product
•XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
About this manual
•The illustrations as shown in this manual are for instructional purposes only.
•The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
About disposal
•This product contains recyclable components. When disposing of this product, please contact the appropriate local authorities.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the product.
English
DXRmkII series Owner’s Manual |
5 |
|
|
English
Introduction
Introduction
Thank you for purchasing the Yamaha DXRmkII series powered speaker system.
Please read this manual thoroughly to ensure optimum use of the DXRmkII series for the longest possible period of time. Keep the manual in a safe place for future reference.
*The subwoofer used in combination with the DXRmkII series (as shown in this manual) is assumed to be the DXS series (DXS18, DXS15mkII, or DXS12mkII).
Contents
Introduction............................................................................. |
6 |
Setup Examples ................................................................... |
10 |
Main Features of the DXRmkII Series ................................... |
6 |
Troubleshooting.................................................................... |
12 |
Controls and Functions .......................................................... |
7 |
References ........................................................................... |
98 |
Main Features of the DXRmkII Series
DXR15mkII |
DXR12mkII |
FIR-X tuning™
Our proprietary sound-processing technology utilizing a linear-phase FIR filter delivers excellent sound quality at high resolution with a smooth frequency response that is unaffected by phase interference near the crossover point.
D-CONTOUR (Dynamic CONTOUR)
D-CONTOUR is a multiband compressor that dynamically controls the level of each frequency range according to the application and human hearing characteristics. It features a FOH/MAIN mode for using your DXRmkII as a main speaker, and a MONITOR mode that has been optimized for use as a floor monitor. Select the mode that suits your application.
Mixing/LINK functionality
The DXRmkII series features mixing functionality, enabling you to mix sounds by directly inputting three channel signals into the unit.
In addition, the LINK function enables you to easily configure a stereo or dual-mono SR (Sound Reinforcement) system using two DXRmkIIs.
DXR10mkII |
DXR8mkII |
DSP-controlled advanced protection system
Powerful protection circuits ensure secure protection in the speaker unit, amplifier unit, and power supply unit. This protection functionality promotes optimal performance of each component and optimum reliability without distortion even in challenging environments.
Included Accessories
•AC power cord
•Owner’s Manual (this book)
Optional Accessories (sold separately)
|
U-bracket |
Cover |
|
|
|
DXR15mkII |
UB-DXR15 |
SPCVR-1501 |
|
|
|
DXR12mkII |
UB-DXR12 |
SPCVR-1201 |
|
|
|
DXR10mkII |
UB-DXR10 |
SPCVR-1001 |
|
|
|
DXR8mkII |
UB-DXR8 |
SPCVR-0801 |
|
|
|
6DXRmkII series Owner’s Manual
Loading...