Sony CYBER-SHOT DSC-T70/W, CYBER-SHOT DSC-T70/B, CYBER-SHOT DSC-T200/B, CYBER-SHOT DSC-T70HDPR, CYBER-SHOT DSC-T200/R Manual [es]

Digital Still Camera/Cámara fotografía digital
Instruction Manual
			GB
Manual de instrucciones
			ES

DSC-T70/T75/T200

For details on advanced operations, please read “Cybershot Handbook” (PDF) and “Cyber-shot Step-up Guide” on the CD-ROM (supplied) using a computer.

Para tener más información sobre las operaciones avanzadas, consulte la “Guía práctica de Cyber-shot” (PDF) y la “Guía avanzada de Cyber-shot” del CD-ROM (suministrado) utilizando un ordenador.

Operating Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

Manual de instrucciones

Antes de operar la unidad, lea este manual atentamente, y guárdelo para futuras referencias.

© 2007 Sony Corporation

3-219-484-61(1)

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. DSC-T70/T75/T200

Serial No. ___________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

For Customers in the U.S.A.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference.

Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.

Use

[ Power Sources

This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.

[ Polarization

This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

[ Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

[ Object and Liquid Entry

Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

[ Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

2

[ Cleaning

Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.

Installation

[ Water and Moisture

Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

[ Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

[ Accessories

Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.

[ Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.

–Never cover the slots and openings with a cloth or other materials.

–Never block the slots and openings by placing the set on a bed, sofa, rug, or other similar surface.

–Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

–Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.

[ Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.

Service

[ Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

–When the power cord or plug is damaged or frayed.

–If liquid has been spilled or objects have fallen into the set.

–If the set has been exposed to rain or water.

–If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged.

–If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.

–When the set exhibits a distinct change in performance – this indicates a need for service.

[ Servicing

Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

[ Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

[ Safety Check

Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.

3

Read this first

CAUTION

Replace the battery with the specified type only. Otherwise, fire or injury may result.

Do not expose the batteries to excessive heat such as sunshine, fire or the like.

For Customers in the U.S.A. and

Canada

[RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ HD Output Adaptor Cable

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Battery charger

This power unit is intended to be correctly orientated in a vertical or floor mount position.

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-T200

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-T70, DSC-T75

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

4

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For the State of California, USA only

Perchlorate Material - special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate.

For Customers in Europe

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[ Disposal of Old Electrical &
	Electronic Equipment (Applicable		GB
	in the European Union and other
	European countries with separate
	collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

5

[Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

6

Table of contents

IMPORTANT SAFEGUARDS ....................................................................	2
Read this first ............................................................................................	4
Notes on using your camera ....................................................................	8

Getting started .................................................................................		9
Checking the accessories supplied .........................................................		9
1	Preparing the battery pack ..................................................................	10
2	Inserting the battery pack/a “Memory Stick Duo” (not supplied) ........	11
3	Turning the camera on/setting the clock .............................................	13

Shooting images easily (Auto Adjustment mode) ......................	15
Image size/Self-timer/Shooting mode/Flash/Macro/Display ...................	16
Viewing/deleting images ...............................................................	19
Learning the various functions – HOME/Menu ...........................	22
Using the HOME screen .........................................................................	22
HOME items ............................................................................................	23
Using the menu items .............................................................................	24	GB
..............................................................................................Menu items	25
Enjoying your computer ...............................................................	26
Supported Operating Systems for USB connection and application
software “Picture Motion Browser” (supplied) ........................................	26
Viewing “Cyber-shot Handbook” ............................................................	27
Indicators on the screen ...............................................................	28
Battery life and memory capacity ................................................	32
Battery life and number of images that you can record/view .................	32
Number of still images and recording time of movies ............................	33
Troubleshooting ............................................................................	34
Battery pack and power .........................................................................	34
Shooting still images/movies ..................................................................	35
Viewing images ......................................................................................	35
Precautions ....................................................................................	36
Specifications ................................................................................	37

7

Notes on using your camera

[Internal memory and “Memory Stick Duo” back up

Do not turn off the camera or remove the battery pack or “Memory Stick Duo” while the access lamp is lighted, as the internal memory data or “Memory Stick Duo” data may be destroyed. Always protect your data by making a back up copy.

[ Notes on recording/playback

•Before you start recording, make a trial recording to make sure that the camera is working correctly.

•This camera is neither dust-proof, nor splashproof, nor water-proof. Read “Precautions” (page 36) before operating the camera.

•Be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable.

•Do not aim the camera at the sun or other bright light. It may cause the malfunction of your camera.

•Do not use the camera near a location that generates strong radio waves or emits radiation. The camera may not be able to record or play back properly.

•Using the camera in sandy or dusty locations may cause malfunctions.

•If moisture condensation occurs, remove it before using the camera (page 36).

•Do not shake or strike the camera. In addition to malfunctions and an inability to record images, this may render the recording medium unusable, or cause image data breakdown, damage or loss.

•Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.

[ Notes on the LCD screen

•The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the recording in any way.

•If water droplets or other liquids splash on the LCD screen and make it wet, immediately wipe off the screen with a soft cloth. Leaving liquids on the LCD screen surface can harm the quality and cause a malfunction.

[ On image data compatibility

•This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).

•Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.

[ Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

[No compensation for contents of the recording

The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.

[ On illustrations

Illustrations used in this manual are of DSC-T200 unless noted otherwise.

8

Getting started

Checking the accessories supplied

• Battery charger BC-CSD (1)

•Power cord (mains lead) (1)

(not supplied in the USA and Canada)

•Rechargeable battery pack NP-BD1 (1)/ Battery case (1)

•Paint pen (1)

•Adaptor plate (1)

You can place the camera on the Cyber-shot Station (not supplied) using the adaptor plate.

•USB, A/V cable for multi-use terminal (1)

• HD Output Adaptor Cable (1) (DSC-T75 only)

GB

•Wrist strap (1)

•CD-ROM (Cyber-shot application software/ “Cyber-shot Handbook”/“Cyber-shot Step-up Guide”) (1)

•Instruction Manual (this manual) (1)

About the paint pen

•You can paint or put stamps on still images with the paint pen.

•Attach the paint pen to the wrist strap (shown right).

•Do not carry the camera by holding the paint pen. The camera may fall off.

About the wrist strap

Attach the strap and place your hand through the loop to prevent the camera from damage by being dropped.

DSC-T70/T75	DSC-T200
Hook	Hook

9

1 Preparing the battery pack

For customers in the USA and Canada

For customers in countries/regions other than the USA and Canada

	Plug
	to the wall outlet
	to the wall
	outlet
	CHARGE lamp
CHARGE lamp	Power cord (mains lead)

1Insert the battery pack into the battery charger.

2Connect the battery charger to the wall outlet (wall socket).

The CHARGE lamp lights up, and charging starts.

When the CHARGE lamp turns off, charging is finished (Practical charge).

If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer.

[ Charging time

Full charge time	Practical charge time
Approx. 220 min.	Approx. 160 min.

•Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.

•See page 32 for the number of images that can be recorded.

•Connect the battery charger to the nearest wall outlet (wall socket) close by.

•Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

•When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.

•Designed for use with compatible Sony batteries.

10

2Inserting the battery pack/a “Memory Stick Duo” (not supplied)

Battery/ “Memory Stick Duo” cover

	Insert the “Memory Stick
	Duo” with the terminal side	Battery
	facing the lens.
		eject lever
Open Close		GB

Align the v mark of the battery slot with the v mark on the side of the battery pack. Press and hold the battery eject lever and insert the battery pack.

1Open the battery/“Memory Stick Duo” cover.

2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks.

3Insert the battery pack.

4Close the battery/“Memory Stick Duo” cover.

[ When there is no “Memory Stick Duo” inserted

The camera records/plays back images using the internal memory (approx. 31 MB).

11

[ To check the remaining battery charge

Press POWER button to turn on and check the remaining battery on the LCD screen.

Battery
remaining
indicator
Battery	Sufficient	Battery	Battery half	Battery low,	Change the battery
remaining	power	almost fully	full	recording/	with fully charged
guidelines	remaining	charged		playback	one, or charge the
				will stop	battery. (The warning
				soon.	indicator flashes.)

•If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after the battery remaining indicator.

•It takes about one minute until the correct battery remaining indicator appears.

•The displayed battery remaining indicator may not be correct under certain circumstances.

•The Clock Set screen appears when the camera is turned on for the first time (page 13).

[ To remove the battery pack/“Memory Stick Duo”

Open the battery/“Memory Stick Duo” cover.

“Memory Stick Duo”	Battery pack
Make sure that the access lamp is not lit,	Slide the battery eject lever.
then push the “Memory Stick Duo” in once.	Be sure not to drop the battery pack.

•Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

•Use the NP-BD1 battery pack (supplied) only with this camera.

12

3 Turning the camera on/setting the clock

POWER button

Lens

Touch panel

Lens cover

1Press the POWER button or slide the lens cover downward.

2Set the clock by touching the button on the touch panel.

GB

1 Touch the desired date display format, then touch [t].

2Touch each item, then set its numeric value by touching v/V.

3Touch [OK].

On the touch panel buttons

Perform settings on this camera by lightly touching the buttons or icons on the screen with your finger.

• When the item you want to set is not on the screen, touch v/V to change the page.

• You can return to the previous screen by touching [BACK].

• Touching [?] displays the guide about the touched item. To hide this guide, touch [?] again.

•When you touch the top right of the screen while shooting, the icons will momentarily disappear. Taking your finger off the screen will make the icons reappear.

13

[ To set the date and time again

Touch [HOME], then touch (Settings) t [ Clock Settings] (pages 22, 23).

[ When you turn on the power

•Once the battery is inserted in the camera, it may take time before operation becomes possible.

•If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).

14

Shooting images easily (Auto Adjustment mode)

		Zoom (W/T) lever
		Shutter button
Microphone		Self-timer lamp
Flash
DSC-T70/T75
		Lens cover
Microphone	Tripod receptacle (bottom)
1Open the lens cover.
2Hold the camera steady, keeping your arm at your side.		GB

Position the subject in the center of the focus frame or touch the point for focusing.

• is displayed if a face is detected in the touched position or is displayed if an object other than a person’s face is detected.

3Shoot with the shutter button.

When shooting still images:

1 Press and hold the shutter button halfway down to focus.

		The z (AE/AF lock) indicator (green)
		flashes, a beep sounds, the indicator stops
	2	flashing and remains lit.	AE/AF lock indicator
		Press the shutter button fully down.

When shooting movies:

Touch [HOME], then touch (Shooting) t [ Movie Mode] (page 22). Or, touch the shooting mode setting icon, then touch (Movie Mode).

Using the zoom:

Slide the zoom (W/T) lever to the T side to zoom and slide to the W side to return.

15

Image size/Self-timer/Shooting mode/Flash/Macro/Display

A Changing the image size

B Using the self-timer

C Changing the shooting mode

D Selecting a flash mode for still images

E Shooting close-up

F Changing the screen display

[ Changing the image size

Touch the image size setting icon on the screen. Touch the desired item, then [BACK].

Still image

		For prints up to A3 (11 × 17")
		Shoot in 3:2 aspect ratio
		For prints up to A4(8.5 × 11")
		For prints up to 10 × 15 cm (4 × 6") or 13 × 18 cm(5 × 7")
		Shoot at a small image size for e-mail attachment
		Shoot in HDTV aspect ratio
Movie
	(Fine)	Shoot high quality movie for display on TV
	(Standard)	Shoot standard quality movie for display on TV
		Shoot at a small image size for e-mail attachments

[ Using the self-timer

Touch the self-timer setting icon on the screen. Touch the desired item, then [BACK].

Self-Timer Off (): Not using the self-timer

Self-Timer 10sec ( ): Setting the 10-second delay self-timer Self-Timer 2sec (): Setting the 2-second delay self-timer

Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates.

16

[ Changing the shooting mode

Touch the shooting mode setting icon on the screen. Touch the desired item, then [BACK].

						Auto Adjustment	Allows you to shoot still images with the setting adjusted
							automatically.
						Scene Selection	Allows you to shoot with preset settings according to the scene.
						Program Auto	Allows you to shoot with the exposure adjusted automatically (both
							the shutter speed and the aperture value). Also you can select various
							settings using the menu.
						Movie Mode	Allows you to record movies with audio.
	Scene Selection
						High Sensitivity	Allows you to shoot images without a flash under low light
							conditions.
						Smile Shutter	When the shutter button is pressed all the way down and the camera
									GB
							detects a smile, the shutter is released automatically to shoot the
							image. Holding down the shutter button again or shooting 6 images
							exits the capturing smile screen.
						Soft Snap	Allows you to shoot soft images for portraits.
						Twilight Portrait	Allows you to shoot sharp images of people in dark places without
							losing the dark atmosphere of the surroundings.
						Twilight	Allows you to shoot images without losing the dark atmosphere of
							the surroundings.
						Landscape	Focuses only on a distant subject to shoot landscapes, etc.
						Hi-Speed Shutter	Allows you to shoot moving subjects in bright places.
						Beach	When shooting seaside or lakeside scenes, the blue of the water is
							clearly recorded.
						Snow	Allows you to shoot bright images of snowy scenes.
						Fireworks	Allows you to record fireworks in all their splendor.

17

[ Flash (Selecting a flash mode for still images)

Touch the flash mode setting icon on the screen. Touch the desired item, then [BACK].

Flash Auto ():

Strobes when there is insufficient light or backlight (default setting)

Flash On ()

Slow Synchro (Flash forced on) ():

The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.

Flash Off ()

[ Macro/Close focus (Shooting close-up)

Touch the Macro/Close focus mode setting icon on the screen. Touch the desired item, then [BACK].

Macro Off ()

Macro On ():

W side

DSC-T200: Approx. 8 cm or farther (3 1/4 inches or farther)

DSC-T70/T75: Approx. 8 cm or farther (3 1/4 inches or farther)

T side

DSC-T200: Approx. 80 cm or farther (31 1/2 inches or farther)

DSC-T70/T75: Approx. 25 cm or farther (9 7/8 inches or farther)

Close focus enabled ( ):

Locked to the W side: Approx. 1 to 20 cm (13/32 to 7 7/8 inches)

[ Changing the screen display

Touch [DISP] on the screen to change to the display selection screen.

Display Setup: This sets whether or not to display the icons on the screen. LCD Brightness: This sets the backlight brightness.

Display Histogram: This sets whether or not to display the histogram on the screen.

18

Viewing/deleting images

(Playback) button

DSC-T70/T75	Zoom (W/T) lever

	Speaker
Speaker	Multi connector (bottom)

	1Press	(Playback) button.
	If you press	(Playback) when the camera is powered off, the camera is turned on automatically and
				GB
	set to playback mode. To switch to the shooting mode, press		(Playback) again.

2Touch (previous) / (next) on the screen to select an image.

Movie:

Touch B to playback a movie.

Fast forward/Rewind: m/M (Touch B or x to return to normal playback.)

Volume control:Touch , then adjust the volume with /. Touch again. The volume control bar disappears.

Stop: Touch x.

[ To delete images

1 Display the image you want to delete, then touch . 2 Touch [OK].

[ To view an enlarged image (playback zoom)

Touch a still image while it is displayed to enlarge the corresponding area. Touch to zoom out.

v/V/b/B: Adjusts the position. [BACK]: Cancels playback zoom. : Turns v/V/b/B on/off.

• You can also enlarge the image with the zoom (W/T) lever.

19

[ To view an index screen

Touch (Index) to display the index screen. Touch/ to display the previous/next page.

To return to the single image screen, touch the thumbnail image.

•You can also access the index screen by selecting [ Image Index] in(View Images) on the HOME screen.

•If you touch [DISP] in index mode, you can set the number of images displayed in the index screen.

[ To delete images in index mode

1Touchwhile the index screen is displayed.

2Touch the thumbnail images to add a check mark to the images you want to delete.

mark is checked in the check box of the image.

To cancel the deletion, touch the image again to deselect the mark.

3Touch [t], and then touch [OK].

•To delete all the images in a folder, select (All In This Folder) from(Delete) in the menu screen, then touch [OK].

[ To play back a series of images (Slideshow)

Touch.

[ To view images on TV screen

Connect the camera to the TV with the cable for multi-use terminal (supplied).

	To the multi connector	To audio/video input
		jacks

Cable for multi-use terminal

When viewing on a high definition TV, an HD output adaptor cable (DSC-T75 only) is required. If you shoot with the image size set to 16:9, the images will be shown in a full-screen display.

• Movies cannot be played back during HD(1080i) output.

20

Connect the camera to the HDTV with the HD Output Adaptor Cable (DSC-T75 only).

	COMPONENT
	VIDEO IN AUDIO
To the multi connector	White/Red
	Green/Blue/Red

GB

HD Output Adaptor Cable (DSC-T75 only)

• The cable for video jacks (Green/Blue/Red) is the same color as the respective jacks.

21

Learning the various functions – HOME/Menu

Using the HOME screen

The HOME screen is the gateway screen for all the functions of your camera.

You can access this screen regardless of whether the camera is in shooting mode or playback mode.

1Touch [HOME] to display the HOME screen.

Item

Category

[HOME]

2Touch the category you want to set.

3Touch the item in the category you want to set.

[ When you select the (Manage Memory) or (Settings) category

1 Touch the category you want to change the settings.

• This is functional only when you select (Settings).

2 Touch the desired setting item. Touch v/V to display the other setting items.

3 Touch the setting item that you want to change, and then touch the desired setting value to set it.

• Touch [×] or [BACK] to return to the previous screen.

22

For details on the operation 1 page 22

HOME items

Touching [HOME] displays the following items. Details on the items are displayed on the screen by the guide.

Category	Items
Shooting	Auto Adjustment
	Scene Selection
	Program Auto
	Movie Mode
View Images	Single Image
	Image Index
	Slideshow
Printing, Other	Print
	Music Tool
	Download Music	Format Music
				GB
Manage Memory	Memory Tool
	Memory Stick Tool
	Format	Create REC. Folder
	Change REC. Folder	Copy
	Internal Memory Tool
	Format
Settings	Main Settings
	Main Settings 1
	Beep	Function Guide
	Initialize	Calibration
	Housing
	Main Settings 2
	USB Connect	COMPONENT
	Video Out	TV TYPE
	Shooting Settings
	Shooting Settings 1
	AF Illuminator	Grid Line
	AF Mode	Digital Zoom
	Shooting Settings 2
	Auto Orientation	Auto Review
	Smile Level
	Clock Settings
	Language Setting

23