4-233-757-16 (1)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
|
|
Model No. |
|
Serial No. |
|
||||
|
|
|
|
|
|
|
|
|
|
CMT-CP333
CMT-CP300
© 2001 Sony Corporation
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.
To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
Don’t throw away the battery with general house waste, dispose of it correctly as chemical waste.
NOTICE FOR THE CUSTOMERS IN THE U.S.A.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
The use of optical instruments with this product will increase eye hazard.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
NOTICE FOR THE CUSTOMERS IN CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the customers in North America
ENERGY STAR® is a U.S. registered mark.
As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
2
Table of Contents |
|
Parts Identification |
|
Main unit ............................................... |
4 |
Remote Control ..................................... |
5 |
Getting Started |
|
Hooking up the system .......................... |
6 |
Inserting two size-AA (R6) batteries into |
|
the remote control ........................... |
7 |
Setting the time ...................................... |
7 |
Saving power in standby mode ............. |
7 |
CD |
|
Loading the CD ..................................... |
8 |
Playing the CD |
|
–– Normal Play/Shuffle Play/Repeat Play .... |
8 |
Programming the CD tracks |
|
–– Program Play .............................. |
9 |
Using the CD display .......................... |
10 |
Tuner |
|
Presetting radio stations ....................... |
11 |
Listening to the radio |
|
–– Preset Tuning ........................... |
11 |
Using the Radio Data System (RDS)* ... |
12 |
Tape |
|
Loading a tape ..................................... |
13 |
Playing a tape ...................................... |
13 |
Recording to a tape |
|
–– CD Synchro Recording/ |
|
Recording Manually/Program Edit .... |
14 |
Timer-recording radio programs ......... |
15 |
Sound Adjustment |
|
Adjusting the sound ............................. |
17 |
Other Features |
|
Falling asleep to music |
|
— Sleep Timer .............................. |
17 |
Waking up to music |
|
— Daily Timer .............................. |
18 |
Optional Components |
|
Hooking up the optional components.... |
19 |
Additional Information |
|
Precautions .......................................... |
20 |
Troubleshooting ................................... |
21 |
Specifications ...................................... |
23 |
* European model only |
|
3
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses () for details.
1234 5~6789 q;
ef ed es
ea e;
M x |
m |
M |
?/1
ZZ
z |
Y x |
X |
m |
M |
Z Z Z
u x
. >
m M
qa qs qd
qf qg
qh
qj qk
|
|
|
|
|
|
|
|
wd~wk |
|
|
|
|
|
|
|
|
|
wl |
ws wa w;ql |
|
1 DISC indicator wa (8, 9) BASS ea (17)
CD 1 wd (9)
CD 1 Zwf (8, 9) CD 2 wg (9)
CD 2 Zwh (8, 9) CD 3 wj (9)
CD 3 Zwk (8, 9)
CD SYNC 7 (14, 15) CD uws (8~10)
CD xqj (8, 10)
CD ./>qk (8, 9) CD m/Mqk (8)
DECK A EJECT Z5 (13) DECK B EJECT Z6 (13) DSG 4(17, 19)
FUNCTION es (8, 9, 11, 13, 14, 19)
PHONES jack wl
PLAY MODE w; (8~10, 15) Remote sensor 3
REPEAT ql (9) TAPE A N1 (13)
TAPE B Y0 (13~15) TAPE A x2 (13) TAPE B xqa (13~15)
TAPE A m/Mef (13) TAPE B m/Mqs (13)
TAPE REC z8 (14) TAPE X9 (13~15) TREBLE e; (17) TUNER BAND qd (11)
TUNING MODE qf (11, 12) TUNING +/– qg (11, 12) VOLUME qh (18)
BUTTON DESCRIPTIONS
@/1 (power) ed (7, 11, 16, 18, 19, 22)
4
1 2 3 4
?/1
wl wk
wj wf~wh
wd
N X x
ws w;~wa
ql
qk qj
qhqgqf
BASS/TREBLE ql (17) CD wj (8)
DIRECTION qj (13~15) DISC1 wf (9)
DISC2 wg (9) DISC3 wh (9)
DISPLAY qs (7, 10, 12) DSG qa (17)
ENTER qh(7, 11, 15, 18) FUNCTION 5 (8, 9, 11, 13, 14,
19)
MEMORY qk (11)
PLAY MODE wl (8~10, 15) SLEEP 1 (17) STEREO/MONO qd (12) TAPE A/B wk (13)
TIMER SELECT 2 (16, 18) TIMER SET 3 (7, 15, 18) TUNER/BAND 7 (11) TUNING MODE 6 (11, 12) VOL + qf (18)
VOL – qg (18)
5
6
7
8
9
q; qa qs
qd
BUTTON DESCRIPTIONS
Nwd (8~10, 13~15) X8 (8, 13~15)
x9 (8, 10, 13~15)
.ws (7~9, 11, 15, 17, 18) >0 (7~9, 11, 15, 17, 18) mw; (8, 11~13)
Mwa (8, 11~13)
@/1 (power) 4 (7, 11, 16, 18)
5
Identification Parts
Follow steps 1through 4of the procedure below to hook up your system using the supplied cords and accessories.
AM loop antenna
FM antenna
Right speaker
2 |
|
1 |
3 |
|
|
|
4 |
Left speaker
1Connect the speakers.
Connect the right and left speaker cords to the SPEAKER terminals as shown below.
|
3 |
|
3 |
L |
Solid (3) |
|
||
|
|
|
R |
# |
|
# |
|
|
|
|
Stripe (#) |
|
Insert this portion |
2Connect the FM and AM antennas.
Set the AM loop antenna up before connecting it.
Jack type A Extend the FM wire |
AM loop |
||||||
|
|
|
|
|
|
antenna horizontally |
|
|
A |
|
|
|
|
antenna |
|
ANTENN |
|
|
|
|
|
|
|
|
|
|
F |
M |
75 |
Ω |
|
|
|
|
|
|
|||
|
|
|
|
|
|
||
A |
M |
U |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Jack type B
ANTENNA |
|
|
U |
AM |
U |
|
Ω FM75
Extend the FM
wire antenna AM loop horizontally antenna
6
3For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.
110V-120V
220V-240V
VOLTAGE
SELECTOR
4Connect the power cord to a wall outlet.
If the plug does not fit the wall socket, detach the supplied plug adaptor (only for
models equipped with an adaptor). To turn on the system, press @/1.
|
e |
|
E |
E |
|
e |
||
|
Tip
When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to prevent possible damage from battery leakage and corrosion.
1 Turn on the system.
2 Press TIMER SET on the remote.
If you are setting the clock for the first time, go to step 5.
3 Press ./> on the remote repeatedly until “CLOCK” appears in the display.
4 Press ENTER on the remote.
The hour indication flashes.
5 Press ./> on the remote repeatedly to set the hour.
6 Press ENTER on the remote.
The minute indication flashes.
7 Press ./> on the remote repeatedly to set the minute.
8 Press ENTER on the remote.
The clock will begin operating.
To reset the system clock
Start over from step 1.
Saving power in standby
mode
Press DISPLAY on the remote repeatedly while the system is turned off.
The system switches as follows:
Clock display yPower Saving Mode
Started Getting
7
CD
1 Press any one of the Z buttons for CD 1 - 3.
The disc tray slides out.
2 Load a CD onto the disc tray.
N |
x |
|
|
m |
M |
|
|
?/1 |
|
Load with the label side up. When you play a CD single
(8 cm CD), load it onto the inner circle of the tray.
3 Press the same Z to close the disc tray.
Playing the CD
–– Normal Play/Shuffle Play/Repeat Play
This system lets you play CDs in different play modes.
1041
Track number Playing time
1 Turn FUNCTION (or press FUNCTION on the remote repeatedly) until “CD” appears in the display.
The indicator surrounding the CD uand CD xbuttons lights up.
You can switch the function to CD by pressing the CD button on the remote.
2 Press PLAY MODE repeatedly until the mode you want appears in the display.
|
Select |
To play |
|
No display |
The selected CD in original order |
|
|
when the 1 DISC indicator lights |
|
|
up. |
|
|
|
|
|
All the CDs in consecutive order |
|
|
when the 1 DISC indicator goes |
|
|
off. |
|
|
|
|
SHUFFLE |
The tracks on the selected CD in |
|
|
random order when the 1 DISC |
|
|
indicator lights up. |
|
|
|
|
|
The tracks on all the CDs in |
|
|
random order when the 1 DISC |
|
|
indicator goes off. |
|
|
|
|
PGM |
The tracks on all the CDs in any |
|
|
order that you want (see |
|
|
“Programming the CD tracks” on |
|
|
page 9). |
|
|
|
3 Press CD u (or N on the remote). |
||
Other Operations |
||
|
|
|
To |
Do this |
|
|
|
|
Stop playback |
Press CD x. |
|
|
|
|
Pause |
Press CD u (or Xon the |
|
|
|
remote). Press again to |
|
|
resume playback. |
|
|
|
Select a track |
During playback or pause, |
|
|
|
press CD ./> |
|
|
repeatedly until you find the |
|
|
desired track. |
Find a point in a track |
During playback, press and |
|
hold down CD m/M |
|
until you find the desired |
|
point. |
|
|
8