HW-C700
HW-C700B
HW-C770S
HW-C770BS
AV Receiver System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
HW-C700-C770S-C770BS-XAC_0616.in1 1 |
2010-06-17 10:06:39 |
Safety information
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Note to CATV system installer
This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the product.
This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
2
HW-C700-C770S-C770BS-XAC_0616.in2 2 |
2010-06-17 10:06:56 |
ENG
PRECAUTIONS
2.7 inches
3.9 inches
3.9 inches
3.9 inches
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure
the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely from the power supply, remove the AC plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the AC plug from the wall outlet.
Voltage peaks due to lightning could damage the unit.
Protect the player from moisture(i.e. vases), and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold temperatures.
If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
3
HW-C700-C770S-C770BS-XAC_0616.in3 3 |
2010-06-17 10:06:56 |
Features
Digital AV Receiver
This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss.
Dolby Pro Logic IIx
Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.
DTS-HD (Master Audio, High Resolution) (Digital Theater Systems - High Definition)
DTS-HD Audio provides the highest quality multi-channel sound possible.
It delivers sound quality that matches the clear and vivid images of high-definition video.
DTS
Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding.
Dolby Pro Logic IIz
Dolby Pro Logic IIz adds front height channels to surround sound, creating a 7.1 playback system for video games, home music, and movies; bringing enhanced spatial effects and enveloping sound.
DTS 96/24
DTS 96/24 encodes standard 16 bit/44.1 kHz sound to 24 bit/96kHz and applies it to a 5.1 CH sound track.
DOLBY DIGITAL EX
Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.
DTS (Digital Theater Systems)
DTS provides a discrete 5.1 CH digital audio signal for both music and movie contents and uses less compression than Dolby Digital for richer sound.
Dolby Digital Plus
Dolby Digital Plus is the next-generation audio technology for all high-definition programming and media.
Dolby True-HD
Dolby True-HD is Dolby’s next-generation lossless technology developed for high-definition disc-based media.
iPod
You can enjoy music files by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock.
SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing
Provides more realistic surround sound with normal stereo audio sources.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
DTS-ES (Extended Surround)
The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc.
Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360degree surround effect.
DTS-ES adds an additional rear center surround channel for 6.1 channel sound.
ACCESSORIES
1 2 3
4 5 6
7 8 9
0
VOL |
TUNING |
/CH |
Remote Control/ |
FM antenna |
User’s manual |
iPod Dock |
ASC microphone |
|
Batteries (AAA size) |
|||||
|
|
|
|
4
HW-C700-C770S-C770BS-XAC_0616.in4 4 |
2010-06-17 10:07:01 |
Contents
SAFETY INFORMATION 2 Safety Warnings
23 Precautions
FEATURES 4 Accessories
4
DESCRIPTION 7 Front Panel
78 Rear Panel
10 Display
11 Insert Remote Control Batteries
11 Operation Range of the Remote Control
12 Tour of the Remote Control
CONNECTIONS
14
14 Speaker Positioning
16Connecting the Speakers
17Connecting External Devices/Your TV via HDMI
18HDMI Function
19Connecting to your TV
20Connecting a DVD or BD(Blu-ray) Player
21Connecting a Cable, Satellite or Set-top Box
22Connecting a VCR
23Connecting a CD Player
24Connecting 7.1 Channel Devices
25Connecting an iPod
27 Connecting the FM Antenna
27 Connecting Aux Components
ENG
CONTENTS ●
BASIC FUNCTIONS OF YOUR AV |
28 |
Before Using the AV Receiver |
RECEIVER |
28 |
Audio Setup |
28 |
29 |
Selecting Digital/Analog Input |
5
HW-C700-C770S-C770BS-XAC_0616.in5 5 |
2010-06-17 10:07:02 |
Contents
SETUP |
30 |
Setup Menu Tree |
30 |
34 |
Setting the Speaker Size |
35 |
Setting the Speaker Listening Distance |
|
36 |
Setting the Speaker Level |
|
|
37 |
Setting the Test Tone |
|
38 |
Setting Dolby Pro Logic Mode |
|
38 |
Setting Dolby Pro Logic IIx |
|
39 |
Setting Dolby Pro Logic IIz |
|
39 |
Setting Tone Control |
|
40 |
Setting NEO:6 Mode |
|
41 |
Setting EX/ES Mode |
|
42 |
AV SYNC |
|
42 |
MP3 Enhancer |
|
42 |
Smart Volume |
|
43 |
ASC (Auto Sound Calibration) Setup |
|
44 |
DRC Setup |
|
44 |
HDMI Setup |
|
44 |
Variable Set |
OPERATION |
45 |
Using the Surround Modes |
45 |
46 |
Using the Subwoofer Selection Button |
47 |
Listening to the Radio |
|
48 |
Using an iPod |
|
|
50 |
Convenient Functions |
|
51 |
Software Upgrade |
MISCELLANEOUS
52
TROUBLESHOOTING
55
APPENDIX
57
52 Operating Your TV With the Remote Control
54Operating your DVD or BD player with the remote control
55Troubleshooting
57 Specifications
6
HW-C700-C770S-C770BS-XAC_0616.in6 6 |
2010-06-17 10:07:02 |
Description
FRONT PANEL
ENG
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
DESCRIPTION ●
10 |
11 |
12 13 |
14 |
15 |
16 17 |
18 |
19 |
20 |
1 |
HEADPHONE JACK |
Used to connect a set of headphones. |
|
2 |
AUX IN JACKS |
Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device. |
|
3 |
ASC MIC JACK |
Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration). |
|
4 |
DISPLAY |
Displays the speaker/audio input status, listening mode, etc. |
|
5 |
S.DIRECT/STEREO BUTTON |
Used to select the S.DIRECT or STEREO mode. |
|
6 |
MULTI CH BUTTON |
Used to select a connected 7.1 multi channel player. |
|
7 |
AV SYNC BUTTON |
Used to select the Audio Delay Mode. |
|
8 |
VOLUME CONTROL |
Adjusts the volume level. |
|
9 |
POWER |
Turns the receiver on/off. |
|
10 |
INPUT SELECT BUTTON |
Used to select a source. (FM BD/DVD SAT TV VCR CD AUX 7.1 MULTI CH |
|
IPOD AUDIO IPOD VIDEO). |
|||
|
|
11AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.
12SOUND EFFECT BUTTON Toggles to select a surround sound mode.
13 |
SETUP BUTTON |
Displays the SETUP menu. |
|
|
, |
. |
Used to move the cursor up, down, left or right. |
14 |
UP( ), DOWN( ), LEFT(<), |
|
|
RIGHT(>) BUTTONS |
Also used to select detailed options in the SOUND EFFECT mode and to change the tone level. |
||
15 |
ENTER BUTTON |
Used to select an item in the SETUP menu. |
|
16 |
TONE CONTROL BUTTON |
Used to set the bass, treble level and tone to on/off. |
|
17 |
ASC BUTTON |
|
Used to select the ASC (Auto Sound Calibration) mode. |
18 |
TUNING MODE BUTTON |
Used to select the Manual or Preset mode for FM radio. |
|
19 |
SELECT BUTTON |
Used to change the radio frequency. |
|
20 |
MEMORY BUTTON |
Used to set a preset radio frequency. |
7
HW-C700-C770S-C770BS-XAC_0616.in7 7 |
2010-06-17 10:07:02 |
Description
REAR PANEL
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
|
18 |
19 |
|
|
|
|
11 |
12 |
13 |
14 |
15 |
16 |
17 |
8
HW-C700-C770S-C770BS-XAC_0616.in8 8 |
2010-06-17 10:07:02 |
1 |
FM ANTENNA JACK |
Connect the FM Antenna here. |
2 |
MULTI CH IN JACKS |
Receives the analog audio signal from an external player with a multi-channel port. |
3 |
HDMI IN JACKS |
Receives digital video and audio signals simultaneously using an HDMI cable. |
4 |
HDMI OUT JACK |
Outputs digital video and audio signals simultaneously using an HDMI cable. |
5 |
USB PORT |
Can be only used for firmware upgrades. |
6 |
COMPONENT VIDEO IN JACKS |
Receives the component video signal. |
7 |
COMPONENT VIDEO OUT JACKS |
Outputs the component video signal. |
8 |
iPod JACK |
Receives the audio/video signal from an iPod. |
9 |
OPTICAL IN JACKS (DIGITAL AUDIO IN) |
Receives the digital optical audio signal. |
10 |
COAXIAL IN JACK (DIGITAL AUDIO IN) |
Receives the digital coaxial audio signal. |
11 |
VCR VIDEO IN JACK |
Receives the video signal from a VCR. |
12 |
VCR VIDEO OUT JACK |
Outputs the video signal to a VCR. |
13 |
VIDEO IN JACKS |
Receives the video signal from a video player (BD/DVD, SAT,TV). |
14 |
VIDEO OUT JACK |
Outputs the video signal to video devices (TV, Projector etc). |
15 |
VCR AUDIO IN JACKS |
Receives the audio signal from a VCR. |
16 |
VCR AUDIO OUT JACKS |
Outputs the audio signal to a VCR. |
17 |
AUDIO IN JACKS |
Receives the audio signal from a video player (BD/DVD, SAT,TV, CD). |
18 |
SUBWOOFER AUDIO OUT JACKS |
Connect the subwoofers. |
19 |
SPEAKER OUT TERMINALS |
Speaker connection terminals. |
ENG
DESCRIPTION ●
9
HW-C700-C770S-C770BS-XAC_0616.in9 9 |
2010-06-17 10:07:04 |
Description |
|
|
|
DISPLAY |
|
|
|
1 |
2 |
3 |
4 |
|
|
|
5 |
|
7 |
|
6 |
1 |
SPEAKER INDICATORS |
Displays the connected speakers. |
2 |
LISTENING MODE INDICATORS |
Displays the current listening mode. |
3 |
TUNING INDICATORS |
Displays the status of the current radio broadcast. |
|
|
|
4 |
AUDIO INPUT INDICATORS |
Displays the audio input signal type of the currently connected external audio source. |
5 |
SPEAKER LEVEL INDICATOR |
Displays the speaker level. |
|
|
|
6 |
RADIO FREQUENCY INDICATORS |
Displays the current radio frequency range. |
|
|
|
7 |
MESSAGE DISPLAY |
Informs you of the status of the receiver. |
10
HW-C700-C770S-C770BS-XAC_0616.in10 10 |
2010-06-17 10:07:04 |
INSERT REMOTE CONTROL BATTERIES
* Battery size: AAA
MFollow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
Assuming typical TV usage, the batteries last for about one year.
Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
ENG
DESCRIPTION ●
OPERATION RANGE OF THE REMOTE CONTROL
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
POWER |
|
|
SELECT |
|
|
INPUTTV SOURCE |
|
AMP/TV |
|
DIMMER |
BD/DVD |
1 |
|
2 |
3 |
4 |
|
5 |
6 |
NEO : 6 |
|
SLEEP |
|
7 |
|
8 |
9 |
PROLOGIC |
AUDIO ASSIGN |
DSP |
|
|
|
0 |
|
|
|
MUTE |
|
VOL |
|
|
TUNING |
|
|
ASC |
/CH |
TUNER MEMORY |
SUBWOOFER |
MO/ST |
|
SETUP/MENU |
|
|
INFO |
RETURN |
|
|
EXIT |
BD/DVD |
SAT |
TV |
CD |
MULTI CH |
|
VCR /AUX |
iPod |
11
HW-C700-C770S-C770BS-XAC_0616.in11 11 |
2010-06-17 10:07:04 |
Description
TOUR OF THE REMOTE CONTROL
1
2
POWER |
|
INPUT SELECT |
|
TV SOURCE |
|
AMP/TV |
DIMMER |
BD/DVD |
16
17
18
|
1 |
2 |
3 |
3 |
4 |
5 |
19 |
|
6 |
||
|
NEO : 6 |
SLEEP |
20 |
4 |
7 |
|
8 |
9 |
|
5 |
PROLOGIC |
AUDIO ASSIGN |
DSP |
|
|
|
|
0 |
|
21 |
|
6 |
|
|
|
|
22 |
7 |
|
|
|
|
23 |
8 |
|
|
|
|
|
|
|
MUTE |
|
|
|
|
|
|
|
|
|
9 |
VOL |
|
|
TUNING |
24 |
|
|
|
|||
|
|
|
ASC |
/CH |
|
10 |
TUNER MEMORY |
SUBWOOFER |
MO/ST |
25 |
|
11 |
|
|
|
|
26 |
12 |
SETUP/MENU |
|
|
INFO |
27 |
|
|
|
|
||
13 |
|
|
|
|
28 |
|
|
|
|
|
|
14 |
RETURN |
|
|
EXIT |
29 |
|
|
|
|
|
|
15 |
BD/DVD |
SAT |
TV |
CD |
|
|
|
|
|
|
MULTI CH |
VCR /AUX |
iPod |
12
HW-C700-C770S-C770BS-XAC_0616.in12 12 |
2010-06-17 10:07:05 |
1 |
POWER BUTTON |
Turns the receiver on/off. |
|
|
|
Used to select the AMP/TV mode. |
|
2 |
AMP/TV BUTTON |
- If you select the AMP mode, the button will flash orange. |
|
- If you select the TV mode, the button will flash green. |
|||
|
|
||
3 |
NUMBER BUTTONS |
Used to select a TV channel. |
|
4 |
NEO : 6 BUTTON |
Select the desired NEO:6 mode. |
|
5 |
PROLOGIC BUTTON |
Select the desired Dolby Pro Logic audio mode. |
|
6 |
SKIP BUTTONS |
Press to skip backwards or forwards on a connected DVD/BD player or iPod. |
|
7 |
STOP/PLAY BUTTON |
Press to stop/start playback on a connected DVD/BD player or iPod. |
|
8 |
MUTE BUTTON |
Mutes the sound of a connected device. |
|
9 |
VOLUME CONTROL BUTTONS |
Adjusts the volume of the selected device. |
|
10 |
SUBWOOFER BUTTON |
Used to select the Subwoofer. |
|
11 |
TUNER MEMORY BUTTON |
Used to set a preset radio frequency. |
|
12 |
SETUP/MENU BUTTON |
Displays the SETUP menu. |
|
13 |
UP/DOWN/LEFT/RIGHT BUTTONS |
Used to navigate the menus. |
|
14 |
RETURN BUTTON |
Used to return to the previous menu from the SETUP menu. |
|
15 |
FUNCTION SELECTOR |
Used to select an input source. |
|
BUTTONS |
|||
|
|
||
16 |
INPUT SELECT, |
Toggles to find and select an input source. |
|
TV SOURCE BUTTON |
Press to select a connected TV's video source. |
||
|
|||
17 |
DIMMER BUTTON |
Adjusts the brightness of the display. |
|
|
|
Used to select the BD/DVD mode. |
|
18 |
BD/DVD BUTTON |
- If you select the BD mode, the button will flash orange. |
|
|
|
- If you select the DVD mode, the button will flash green. |
|
19 |
SLEEP BUTTON |
Used to set the Sleep Timer. |
|
20 |
AUDIO ASSIGN BUTTON |
Toggles to select an input mode for the selected source. |
|
21 |
DSP BUTTON |
Used to select the SFE mode. |
|
22 |
SEARCH BUTTON |
Press to search backwards or forwards. |
|
23 |
PAUSE BUTTON |
Pauses playback on a connected device. |
|
24 |
TUNING/CHANNEL BUTTONS |
Used to change the radio broadcasting frequency or TV channel. |
|
25 |
ASC BUTTON |
Used to set the Auto Sound Calibration function. |
|
26 |
MO/ST BUTTON |
Select MONO or STEREO for radio broadcasts. |
|
27 |
INFO BUTTON |
Display information on the connected device currently being used. |
|
28 |
ENTER BUTTON |
Used to select an item in the SETUP menu. |
|
29 |
EXIT BUTTON |
Exits the SETUP menu. |
ENG
DESCRIPTION ●
13
HW-C700-C770S-C770BS-XAC_0616.in13 13 |
2010-06-17 10:07:05 |
Connections
This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
SPEAKER POSITIONING
There are two methods for positioning the speakers.
When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT Jack.
* The HW-C700/C700B model does not supply speakers (sold separately).
|
|
FHL |
FHR |
6.6~9.8 feet (2~3m) |
|
|
6.6~9.8 feet (2~3m) |
AV |
|
|
AV |
RECEIVER |
|
|
RECEIVER |
SL |
SR |
SL |
SR |
SBL |
SBR |
|
|
L, R, C, SW, SL, SR, SBL, SBR ( Dolby Pro Logic IIx ) L, R, C, SW, SL, SR, FHL, FHR( Dolby Pro Logic IIz)
Position of AV Receiver
Place the AV Receiver on a dedicated stand or rack.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Subwoofer function (HW-C770S/C770BS only)
Active subwoofer with integrated 150W amplifier provides rich bass sound.
•Connect the SW OUT terminal of the amplifier to the INPUT terminal of the subwoofer speaker.
• Press the POWER button on the rear side of the subwoofer to turn the power on.
• Using the subwoofer’s VOLUME control, you can set the desired bass level
(See page 36 "Setting the speaker level" to set the subwoofer level in the menu).
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ears.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speaker.
14
HW-C700-C770S-C770BS-XAC_0616.in14 14 |
2010-06-17 10:07:05 |
Center speaker
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
Surround Speakers
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they face each other.
Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.
Surround Back Speakers SBL SBR
If you are using two rear center speakers, place them behind the listening position.
Place the surround back speaker about 2.3-3.3 feet (70 cm to 1 m).When you
Front Height Speakers FHL FHR (Using Dolby Pro Logic IIz)
When using Dolby Pro Logic IIz, place the Surround Back Speakers on the FHL, FHR position above the front L and front R speakers at least 3.3 feet(1 m) above each one.
- Using the Surround Back Speakers as Front Height Speakers -
1. Fasten 2 screws(not supplied) for each speaker on the wall above the front L and R speakers.
2. Install the Surround Back Speakers (L, R) by fitting the holes on the back the Surround Back Speakers to the screws on the wall.
M When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.
Speaker Configuration
For the best surround-sound experience, you should connect seven speakers and a powered subwoofer.
The following table shows which channels you should use based on the number of speakers you have.
2 speakers 3 speakers 4 speakers |
5 speakers |
6 speakers |
7 speakers |
7 speakers |
|
(DPL IIx) |
(DPL IIz) |
||||
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SBL |
SBL |
FHL |
SBR FHR
MNo matter how many speakers you use, a powered subwoofer is recommended for powerful and solid bass.
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set.
15
ENG
CONNECTIONS ●
HW-C700-C770S-C770BS-XAC_0616.in15 15 |
2010-06-17 10:07:06 |
Connections
CONNECTING THE SPEAKERS
FRONT (R) SURROUND(R) |
SURROUNDBACK(R) |
SURROUNDBACK(L) |
SURROUND(L) |
FRONT (L) |
PS-FC770S PS-RC770S |
PS-BC770S |
PS-BC770S |
PS-RC770S |
PS-FC770S |
ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER) PS-AW730
CENTER
PS-CC770S
Model HW-C700/C700B
AV Receiver |
HW-C700/C700B |
|
|
Model HW-C770S/C770BS |
|
AV Receiver |
HW-C770S/C770BS |
FRONT SPEAKER |
PS-FC770S |
CENTER SPEAKER |
PS-CC770S |
SURROUND SPEAKER |
PS-RC770S |
SURROUND BACK SPEAKER |
PS-BC770S |
ACTIVE SUBWOOFER |
PS-AW730 |
MOne Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought the player and connect it to the other SUBWOOFER OUT Jack.
When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT HEIGHT Jack.
Connecting Speaker Wire
1. Loosen the knob by turning counterclockwise.
2. Insert the bare part of the wire into the hole in the side of each terminal.
3. Tighten the knob by turning clockwise to secure the wire.
MKeep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects into the duct (hole).
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
Connecting the Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into |
|
|
the red (+) terminal, and then release the tab. |
Black |
Red |
3. Connect the connecting plugs to the back of the AV Receiver.
• Make sure the colors of the speaker terminals on the back of the AV receiver match the colors of the connecting plugs.
16
HW-C700-C770S-C770BS-XAC_0616.in16 16 |
2010-06-17 10:07:09 |
CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI
HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more.
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source.
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.
DVD or |
SAT |
Game console |
Camcorder |
Blu-ray Player |
(Cable/Satellite/Set-top box) |
or |
|
|
|
HDTV Tuner |
|
|
|
(HDTV Terrestrial Receiver) |
|
ENG
CONNECTIONS ●
•Connect it if you want to use Anynet+.
OPTICAL
OUT
High-bandwidth Digital Content Protection System (HDCP) support
To play digital contents through the HDMI connection, both the connected external device and TV must support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.
Compatibility with a TV Supporting HDMI
A TV with an HDMI jack. |
Video/Audio |
|
|
A TV with a DVI-D jack (TV supporting HDCP) |
Video |
|
|
A TV with a DVI-D jack (TV not supporting HDCP) |
- |
|
|
MAudio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is protected by CPPM, use a player supporting CPPM.
The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the performance of the connected device.
Since HDMI connection supports both video and audio, you don’t have to connect an additional audio cable.
17
HW-C700-C770S-C770BS-XAC_0616.in17 17 |
2010-06-17 10:07:14 |
Connections
HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+.
1.Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)
2.Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
•You can operate the volume on the AV receiver by using Volume buttons on the TV remote control.
To turn on Anynet+
1.Press the SETUP/MENU button.
•Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2.Press the ENTER button to select SETUP ENTER.
3.Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER or ► button.
4.Press the ▲▼ buttons to select HDMI ANYNET+, and then press the ENTER or ► button.
5.Press the ▲▼ buttons to set ANYNET+ to ON.
- To exit setup mode-
•Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
MIf you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using the TV’s remote control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC).
Please check your TV for the n logo. If your TV has an n logo, then it supports the Anynet+ function.
When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed). Otherwise, it can cause a malfunction.
18
HW-C700-C770S-C770BS-XAC_0616.in18 18 |
2010-06-17 10:07:19 |