Pioneer AVIC-U220 Quick Start Manual

Upgrade Instructions and Operation Manual Addendum

Instructions de mise à jour et Addenda au manuel de
fonctionnement

2012 NAVIGATION UPGRADE SDHC CARD
Carte SDHC 2012 POUR MISE À NIVEAU DE NAVIGATION

T1000-19322

This software upgrade will result in changes to certain
features and availability of infor mation. While the
changes are intended to improve the overall user
experience for most users, Pioneer and its licensors
disclaim any warranty or liability for damages in
connection with such changes.
Cette mise à jour logicielle modifiera l’accès à certaines
fonctions et à certaines informations. Si ces
changements sont destinés à améliorer le confort
d’utilisation de la plupart des consommateurs, Pioneer
et ses partenaires déclinent toute responsabilité pour
tout préjudice lié à ces modifications.

English Français

2

En

English

En

3

4

En

English

En

5

6

En

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate
your model properly.

English

Important

! The screens shown in the examples may

differ from actual screens.

! Actual screens may be changed without

notice for performance and function im­provements.

Precaution

Failure to operate 8
Visit our website 8
SD memory card 9
Models to be upgraded 9
Manual overview 9
Changing to the NAVTEQ map database 9
Setting items to be deleted and initialized by

upgrade 9
Conventions used in this manual 10
Copyright 10

License agreement

PIONEER PRODUCT - for U.S.A. 11
PIONEER PRODUCT - for Canada 13

About the database
About the data for the map database 15

Instructions for upgrading

The navigation system upgrade process 16
Preparation for upgrade 16

– Checking the device number 16
– Getting the password for

authentication 16

Upgrade procedures 17

– Upgrading the software program and

the map database 17

– Checking whether the upgrade was

done properly 18

Changes on the upgraded program

For users upgrading the hardware for the first

time 19

– Searching for a name by entering

characters 19

For users who have previously upgraded the

hardware with CNSD-230FM 19

Troubleshooting

Problems in the procedures for updating 20
Messages in the procedures for

updating 20

En

7

Chapter

01

Precaution

! Read the entire manual before upgrading

the program of your navigation system.

! This package is unique, and cannot be in-

stalled on more than one unit.

! Web-connected computer is required for

online issuance of password.

Failure to operate

! Should the navigation system fail to oper-

ate properly, contact your dealer or nearest
authorized Pioneer Service Station.

! Do not lose the supplied Media Number

Card (MEDIA NUMBER CARD). If the
Media Number Card is lost, reissue of the
Media Number (MEDIA NUMBER) is not
possible. Also you must submit the Media
Number Card when repairs are needed.
The card is necessary as proof of authenti­city if service is required (including recov­ery).

After-sales service for Pioneer products

Please contact the dealer or distributor from
which you purchased the product for after­sales service (including warranty conditions)
or any other information. In case the necessary
information is not available, please contact the
companies listed below.
Please do not ship your product to the compa­nies at the addresses listed below for repair
without making advance contact.

! U.S.A

Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760
800-421-1404

! CANADA

Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
340 Ferrier Street, Unit 2, Markham, Ontario
L3R 2Z5, Canada
1-877-283-5901

905-479-4411
For warranty information, please see the Lim­ited Warranty sheet included with your pro­duct.

Visit our website

Visit us at the following site:

http://www.pioneerelectronics.com

In Canada

http://www.pioneerelectronics.ca

1 Register your product. We will keep the details

of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.

2 Receive updates on the latest products and

technologies.

3 Download owner’s manuals, order product

catalogs, research new products, and much
more.

4 Receive notices of software upgrades and

software updates.

8

En

Precaution

SD memory card

The SD memory card and SDHC memory card
are collectively referred to as the “SD memory
card”.
p Keep the SD memory card out of the reach

of small children to prevent them from ac­cidentally swallowing it.

p Do not store the SD memory card in high

temperatures or direct sunlight.

p Do not subject the SD memory card to

shock or impact.

p Do not allow the SD memory card to come

into contact with liquids. Damage to the
SD memory card and your products could
result from contact with liquids.

p Be careful not to touch terminals on the

SD memory card. Doing so may cause con­nection failures. If any terminals are dirty,
wipe them with a clean dry cloth.

p SDHC Logo is a trademark of SD-3C,

LLC.

Chapter

01

English

Functions and procedures not described in
this manual are basically the same as when
you purchased the navigation system. For de­tails of the basic functions and procedures,
refer to Operation Manual supplied with your
navigation system.

Changing to the NAVTEQ
map database

The display of roads, street names, the back­ground texture of the map, and POI categories
will change depending on locations or the
map scale after upgrading.

Setting items to be deleted
and initialized by upgrade

The following data and settings will be cleared
and reset to default values. Other items will be
retained. However, some items are not listed
because the setting can be easily recovered by
users, such as the last cursor position on the
map screen.

Route setting

Current route

Models to be upgraded

This package can upgrade the software pro­gram and database of the following models:
AVIC-U220

Manual overview

This manual describes how to get the pass­word and activate the upgrade. It also provides
an overview of how functions change after the
upgrade.

Map function

Setting of “Overlay POI”

The user data stored in the internal memory of
the unit may be erased if an unexpected error
occurs during software installation. Pioneer is
not responsible for any data loss or unavailabil­ity of user data.

En

9

Chapter

01

Precaution

Conventions used in this
manual

Before moving on, take a few minutes to read
the following information about the conven­tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
! Buttons on your navigation system are de-

scribed in ALL CAPITAL, BOLD lettering:
e.g.)
MODE button

! Menu items, screen titles, and functional

components are described in bold with
double quotation marks “”:
e.g.)
The “Top Menu” screen appears.

! Touch panel keys that are available on the

screen are described in bold in brackets [ ]:
e.g.)
[Settings]

! Extra information, alternatives and other

notes are presented in the following for­mat:
e.g.)
p The structure of the menus will be chan-

ged due to the addition of the “To p
Menu” screens.

! Functions of other keys on the same screen

are indicated with # at the beginning of the
description:
e.g.)

# Touch [No].

! References are indicated like this:

e.g.)
= Refer to the screen listing at the end of

the AVIC-U220 Operation Manual.

Copyright

The names of private corporations, pro­ducts and other entities described herein
are the registered trademarks or trade­marks of their respective firms.

= For more information, refer to the Operation

Manual of your navigation system.

10

En

License agreement

Chapter

02

PIONEER PRODUCT - for U.S.A.

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS (USA) INC. (“PIONEER”).
PLEASE READ THE TERMS AND CONDI­TIONS OF THIS AGREEMENT CAREFULLY BE­FORE USING THE SOFTWARE INSTALLED ON
THE PIONEER PRODUCTS. BY USING THE
SOFTWARE INSTALLED ON THE PIONEER
PRODUCTS, YOU AGREE TO BE BOUND BY
THE TERMS OF THIS AGREEMENT. THE SOFT­WARE INCLUDES A DATABASE LICENSED BY
THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE TERMS
IN A DOCUMENT INCLUDED IN THIS PRO­DUCT. IF YOU DO NOT AGREE WITH ALL OF
THESE TERMS, PLEASE RETURN THE
PIONEER PRODUCTS (INCLUDING THE SOFT­WARE, AND ANY WRITTEN MATERIALS)
WITHIN FIVE (5) DAYS OF RECEIPT OF THE
PRODUCTS, TO THE AUTHORIZED PIONEER
DEALER FROM WHICH YOU PURCHASED
THEM. USE OF THE SOFTWARE SHALL BE
DEEMED TO BE YOUR CONSENT TO THE LI­CENSE AGREEMENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use

involving the processing of data for other per-

English

sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cense Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT­WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX­PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN­TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or
errors. Pioneer does not warrant that the Soft­ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all nonconformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran­ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.

En

11

Chapter

02

License agreement

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
INCOME, LOST SALES OR BUSINESS, EXPEN­DITURES, INVESTMENTS, OR COMMITMENTS
IN CONNECTION WITH ANY BUSINESS, LOSS
OF ANY GOODWILL, OR DAMAGES) RESULT­ING FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ANY AND ALL CAUSES OF ACTION INDIVI­DUALLY OR IN THE AGGREGATE, INCLUDING
WITHOUT LIMITATION BREACH OF CON­TRACT, BREACH OF WARRANTY, NEGLI­GENCE, STRICT LIABILITY,
MISREPRESENTATION, AND OTHER TORTS.
IF PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.
Some states do not allow the exclusion or lim­itation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the United States except as
authorized and as permitted by the laws and

regulations of the United States. If the Soft­ware has been rightfully obtained by you out­side of the United States, you agree that you
will not re-export the Software nor any other
technical data received from Pioneer, nor the
direct product thereof, except as permitted by
the laws and regulations of the United States
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 U.S. GOVERNMENT END USERS

If the Software is being acquired by or on be­half of the United States government or any
other entity seeking or applying rights similar
to those customarily claimed by the United
States government, the Data is licensed with
“Limited Rights”. Utilization of the Software is
subject to the restrictions specified in the
“Rights in Technical Data” clause at DFARS

252.227-7013, or the equivalent clause for non­defense agencies. Pioneer Electronics (USA)
Inc., 1925 E. Dominguez Street, Long Beach,
CA 90810.

7 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov­erned by and construed in accordance with
the internal laws of the State of California. If
any provision of this Agreement is declared in­valid or unenforceable, the remaining provi­sions of this Agreement shall remain in full
force and effect.

12

En

License agreement

Chapter

02

PIONEER PRODUCT - for Canada

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
ELECTRONICS OF CANADA, INC.
(“PIONEER”). PLEASE READ THE TERMS AND
CONDITIONS OF THIS AGREEMENT CARE­FULLY BEFORE USING THE SOFTWARE IN­STALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS, YOU AGREE TO BE
BOUND BY THE TERMS OF THIS AGREE­MENT. THE SOFTWARE INCLUDES A DATA­BASE LICENSED BY THIRD PARTY SUPPLIER
(S) (“SUPPLIERS”), AND YOUR USE OF THE
DATABASE IS COVERED BY THE SUPPLIERS’
SEPARATE TERMS IN A DOCUMENT IN­CLUDED IN THIS PRODUCT. IF YOU DO NOT
AGREE WITH ALL OF THESE TERMS, PLEASE
RETURN THE PIONEER PRODUCTS (INCLUD­ING THE SOFTWARE, AND ANY WRIT TEN MA­TERIALS) WITHIN FIVE (5) DAYS OF RECEIPT
OF THE PRODUCTS, TO THE AUTHORIZED
PIONEER DEALER FROM WHICH YOU PUR­CHASED THEM. USE OF THE SOFTWARE
SHALL BE DEEMED TO BE YOUR CONSENT
TO THE LICENSE AGREEMENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non
exclusive license to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicense, market
or otherwise transfer the Software or use it in
any manner not expressly authorized by this
agreement. You shall not derive, or attempt to
derive, the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use

involving the processing of data for other per-

English

sons or entities.
Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your license rights in
the Software, the related documentation and a
copy of this License Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cense Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY FOR THE SOFT­WARE, WHETHER EXPRESS OR IMPLIED,
AND ALL WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR ANY PARTICULAR
PURPOSE FOR THE SOFTWARE ARE EX­PRESSLY EXCLUDED. SOME STATES DO NOT
ALLOW EXCLUSION OF IMPLIED WARRAN­TIES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. The Software is complex and
may contain some nonconformities, defects or
errors. Pioneer does not warrant that the Soft­ware will meet your needs or expectations,
that operation of the Software will be error free
or uninterrupted, or that all nonconformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warran­ties regarding the use or results of the use of
the Software in terms of its accuracy, reliability
or otherwise.

En

13

Chapter

02

License agreement

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN­VESTMENTS, OR COMMITMENTS IN CON­NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE­GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR­RANTY, NEGLIGENCE, STRICT LIABILITY, MIS­REPRESENTATION, AND OTHER TORTS. IF
PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.
Some states do not allow the exclusion or lim­itation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that they are prohibited by
any applicable federal, state or local law which
provides that such a disclaimer or limitation
cannot be waived or preempted.

obtained by you outside of Canada, you agree
that you will not re-export the Software nor any
other technical data received from Pioneer,
nor the direct product thereof, except as per­mitted by the laws and regulations of Canada
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. Pioneer
retailers do not have the authority to change
this Agreement. This Agreement shall be gov­erned by and construed in accordance with
the internal laws of the Province of Ontario
and the federal laws of Canada applicable
therein. If any provision of this Agreement is
declared invalid or unenforceable, the remain­ing provisions of this Agreement shall remain
in full force and effect.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside Canada except as authorized
and as permitted by the laws and regulations
of Canada. If the Software has been rightfully

14

En