Loading...
S P E C F I L E
The PT-DX810LS and PT-DX810LK are not equipped with a lens.
Product Number : PT-DX810S/DX810K
PT-DX810LS/DX810LK
Product Name : |
DLP™ Projectors |
As of July 2012. Specifications and appearance are subject to change without notice. |
1 / 1 5 |
SFD12M009
S P E C F I L E
DLP™ Projectors
PT-DX810S/DX810K/DX810LS/DX810LK
Specifications
Main unit |
|
|
|
|
Power supply |
|
120 V AC, 7.5 A, 50/60 Hz |
|
|
|
|
220–240 V AC, 4.3 A, 50/60 Hz |
|
|
Power consumption |
120 V AC, 60 Hz |
790 W (830 VA) (0.2 W with STANDBY MODE set to ECO*1, 6 W with STAND- |
||
|
|
BY MODE set to NORMAL) |
|
|
|
220–240 V AC, 50/60 Hz |
760 W (950 VA) (0.3 W with STANDBY MODE set to ECO*1, 8 W with STAND- |
||
|
|
BY MODE set to NORMAL) |
|
|
DLP™ chip |
Panel size |
17.8 mm (0.7 in) diagonal (4:3 aspect ratio) |
||
|
Display method |
DLP™ chip × 1, DLP™ system |
|
|
|
Pixels |
786,432 (1,024 × 768) × 1, total of 786,432 pixels |
||
Lens |
PT-DX810S/DX810K |
Powered zoom/focus lenses (1.8 – 2.5:1), F 1.7–1.9, f 25.6 – 35.7 mm |
||
|
PT-DX810LS/DX810LK |
Optional powered zoom/focus lenses and fixed-focus lens |
||
Lamp |
|
300 W (max. 310 W) UHM lamps (× 2) (dual lamp system) |
||
Screen size |
|
1.27 –15.24 m (50 – 600 inches) (1.27– 5.08 m (50– 200 inches) with the |
||
|
|
ET-DLE055), 4:3 aspect ratio |
|
|
Brightness*2 |
|
8,200 lumens (dual lamp, LAMP MODE: NORMAL) |
||
Center-to-corner uniformity*2 |
90% |
|
|
|
Contrast*2 |
|
2,000:1 (full on/full off, CONTRAST MODE: HIGH, brightness: 4,100 lumens) |
||
Resolution |
|
1,024 × 768 pixels (Input signals that exceed this resolution will be |
||
|
|
converted to 1,024 × 768 pixels.) |
|
|
Scanning frequency |
HDMI/DVI-D |
fH: 15 – 91 kHz, fV: 50 – 85 Hz, dot clock: 25 –162 MHz or lower |
||
|
RGB |
fH: 15 – 91 kHz, fV: 50 – 85 Hz, dot clock: 162 MHz or lower |
||
|
YPBPR (YCBCR) |
480i (525i): |
fH 15.75 kHz; fV 60 |
Hz, |
|
|
576i (625i): |
fH 15.63 kHz; fV 50 |
Hz, |
|
|
480p (525p): |
fH 31.50 kHz; fV 60 |
Hz, |
|
|
576p (625p): |
fH 31.25 kHz; fV 50 |
Hz, |
|
|
720 (750)/60p: fH 45.00 kHz; fV 60 |
Hz, |
|
|
|
720 (750)/50p: fH 37.50 kHz; fV 50 |
Hz, |
|
|
|
1035/60i: |
fH 33.75 kHz; fV 60 |
Hz, |
|
|
1080 (1125)/60i: fH 33.75 kHz; fV 60 |
Hz, |
|
|
|
1080 (1125)/50i: fH 28.13 kHz; fV 50 |
Hz, |
|
|
|
1080/25p: |
fH 28.13 kHz; fV 25 |
Hz, |
|
|
1080/24p: |
fH 27.00 kHz; fV 24 |
Hz, |
|
|
1080/24sF: |
fH 27.00 kHz; fV 48 |
Hz, |
|
|
1080/30p: |
fH 33.75 kHz; fV 30 |
Hz, |
|
|
1080/60p: |
fH 67.50 kHz; fV 60 |
Hz, |
|
|
1080/50p: |
fH 56.25 kHz; fV 50 |
Hz |
|
Video/S-Video |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] |
||
|
|
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
||
Optical axis shift |
|
Vertical: +50% (powered), horizontal: ±10% (powered) |
||
|
|
(Vertical: +45%, horizontal: ±10% with the ET-DLE080) |
||
|
|
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. |
||
Keystone correction range |
Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080) |
|||
Installation |
|
Ceiling/floor, front/rear |
|
|
Terminals |
HDMI IN |
HDMI 19-pin × 1, HDCP compatible |
|
|
|
|
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, |
||
|
|
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, |
||
|
|
VGA (640 × 480) – WUXGA*3 (1,920 × 1,200), compatible with non- |
||
|
|
interlaced signals only, dot clock: 25 –162 MHz |
||
|
DVI-D IN |
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link |
||
|
|
only |
|
|
|
|
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, |
||
|
|
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, |
||
|
|
VGA (640 × 480) – WUXGA*3 (1,920 × 1,200), compatible with non- |
||
|
|
interlaced signals only, dot clock: 25–162 MHz |
||
As of July 2012 |
2 / 1 5 |
SFD12M009
S P E C F I L E
DLP™ Projectors
PT-DX810S/DX810K/DX810LS/DX810LK
|
RGB 1 IN |
BNC × 5 |
|
|
R, G, B |
R: 0.7 Vp-p, 75 ohms, |
|
|
|
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, |
|
|
|
B: 0.7 Vp-p, 75 ohms |
|
|
|
HD/VD, SYNC: High impedance, TTL (positive/negative) |
|
|
|
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals. |
|
|
Y, PB, PR (Y, CB, CR) |
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
|
|
RGB 2 IN |
D-sub HD 15-pin (female) × 1 |
|
|
R, G, B |
R: 0.7 Vp-p, 75 ohms, |
|
|
|
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, |
|
|
|
B: 0.7 Vp-p, 75 ohms |
|
|
|
HD/VD, SYNC: High impedance, TTL (positive/negative) |
|
|
|
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals. |
|
|
Y, PB, PR (Y, CB, CR) |
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
|
|
VIDEO IN |
BNC × 1, 1.0 Vp-p, 75 ohms |
|
|
S-VIDEO IN |
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
|
|
SERIAL IN |
D-sub 9-pin (female) × 1 for external control (RS-232C compliant) |
|
|
SERIAL OUT |
D-sub 9-pin (male) × 1 for link control (RS-232C compliant) |
|
|
REMOTE 1 IN |
M3 jack × 1 for wired remote control |
|
|
REMOTE 1 OUT |
M3 jack × 1 for link control |
|
|
REMOTE 2 IN |
D-sub 9-pin (female) × 1 for external control (parallel) |
|
|
LAN |
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant |
|
|
|
with PJLink™ |
|
Power cord length |
|
3.0 m (9 ft 10 in) |
|
Cabinet materials |
|
Molded plastic |
|
Dimensions (W × H × D) |
PT-DX810S/DX810K |
498 × 175 *4 × 466 mm (19-19/32 × 6-7/8 *4 |
× 18-11/32 inches) |
|
|
(with supplied lens) |
|
|
PT-DX810LS/DX810LK |
498 × 175 *4 × 432 mm (19-19/32 × 6-7/8*4 |
× 17 inches) |
|
|
(without lens) |
|
Weight |
PT-DX810S/DX810K |
Approx. 16.3 kg (35.9 lbs) (with supplied lens) |
|
|
PT-DX810LS/DX810LK |
Approx. 15.4 kg (34.0 lbs) (without lens) |
|
Operation noise*2 |
|
39 dB (dual lamp operation, LAMP MODE: NORMAL), |
|
|
|
35 dB (dual lamp operation, LAMP MODE: ECO) |
|
Operating temperature |
|
0 – 45 °C (32 – 113 °F) *5 |
|
Operating humidity |
|
20%– 80% (no condensation) |
|
Remote control unit |
|
|
|
Power supply |
|
3 V DC (R6/AA type battery × 2) |
|
Operation range*6 |
|
Approx. 30 m (98 ft 5 in) when operated from directly in front of the |
|
|
|
signal receptor |
|
Dimensions (W × H × D) |
|
51 × 176 × 23 mm (2 × 6-15/16 × 29/32 inches) |
|
Weight |
|
Approx. 134 g (4.7 oz) (including batteries) |
|
As of July 2012 |
3 / 1 5 |
SFD12M009
S P E C F I L E
DLP™ Projectors
PT-DX810S/DX810K/DX810LS/DX810LK
Supplied accessories
|
Power cord (× 1) |
|
(× 2 for PT-DX810ES/DX810EK/DX810ELS/DX810ELK) |
|
Power cord security lock (× 1) |
|
Wireless/wired remote control unit (× 1) |
|
Batteries for remote control (R6/AA type × 2) |
|
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring |
|
& Control Software) (× 1) |
Optional accessories |
|
Zoom lens (0.8 –1.0:1) |
ET-DLE080 |
Zoom lens (1.3 – 2.0:1) |
ET-DLE150 |
Zoom lens (2.4 – 3.7:1) |
ET-DLE250 |
Zoom lens (3.7– 5.6:1) |
ET-DLE350 |
Zoom lens (5.5– 8.9:1) |
ET-DLE450 |
Fixed-focus lens (0.8:1) |
ET-DLE055 |
Ceiling mount bracket |
ET-PKD56H (for high ceilings) |
|
ET-PKD55S (for low ceilings) |
Replacement lamp unit |
ET-LAD60A |
|
ET-LAD60AW (Twin Pack) |
Replacement filter unit |
ET-EMF300 |
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*4 With legs at shortest position.
*5 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector.
*6 Operation range differs depending on environments.
As of July 2012 |
4 / 1 5 |
SFD12M009
S P E C F I L E
DLP™ Projectors
PT-DX810S/DX810K/DX810LS/DX810LK
Dimensions
466 (18-11/32) |
423 (16-21/32) |
|
|
|
|
|
|
||
|
|
|
9 (11/32)
43 (1-11/16) |
416 (16-3/8)
498 (19-19/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale. The illustration shows the PT-DX810S/DX810K.
175 (6-7/8) |
155 (6-3/32) |
77.5 |
(3-1/16) |
21 (13/16) |
|
|
|
20 (25/32) |
|
Terminals
1 |
2 |
3 |
4 |
|
5 |
6 |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
LAN connector |
7 |
Remote 1 |
input |
|
|
|
|
|
|
|
2 |
Video input |
8 |
Remote 1 |
output |
|
|
|
|
|
|
|
3 |
S-Video input |
9 |
Remote 2 |
input |
|
|
|
|
|
|
|
4 |
RGB 1 input |
10 |
Serial input |
|
|
|
|
|
|
|
|
5 |
HDMI input |
11 |
Serial output |
|
|
7 |
8 |
9 |
10 |
11 |
12 |
6 |
DVI-D input |
12 |
RGB 2 Input |
|
|
|
|
|
|
|
||||||
As of July 2012 |
5 / 1 5 |
SFD12M009
Loading...