Panasonic PT-LB2E, PT-LB2EA, PT-LB2U, PT-LB1E, PT-LB1U User Manual

...

0 (0)

Operating Instructions

Network Operation Manual

LCD Projector

Model No. PT-LB2E/LB2EA/LB2U

PT-LB1E/LB1EA/LB1U

	AUTO
	SETUP
MENU	RETURN
ENTER
	AV
FREEZE	MUTE
COMPUTER	VIDEO
DEFAULT FUNCTION	INDEX- WIN.

DIGITAL ZOOM

VOLUME

TQBH0215-1 (E/U/EA)

Contents

Request Regarding Security · ·

·3

What you can do· · · · · · · · · · · · ·

·3

Check your computer· · · · · · · · · · · ·

· · · · · · · · · ·

· · · · · · ·

· · · · · · · ·

· · · · · · ·

·4

Necessary environment for computers to be connected· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

· · 4

Connecting with Wired LAN· ·

4·

Network setting of the projector · ·

·5

Displaying the NETWORK menu· ·

5·

NETWORK· · · · · · · · · · · ·

·6

Wired LAN settings· · · · ·

· 6·

Default network settings·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ··

··

·· ··

··

·· ·· 6

NAME CHANGE· · · · · · · · · · · ·

·7 ·

NETWORK CONTROL· ·

7·

STATUS · · · · · · · · · · · · · · · · · · · ·

·8

INITIALIZE · · · · · · · · · · · · · ·

·8

Using WebBrowser· · · · · · · · · · ·

·9

Before using the WEB control· ·

· 9·

Accessing from the WebBrowser· ·

·10

Monitor information window · ·

· 11

Projector control window·

· 12·

Detailed set up window· · ·

12··

Change password window· ·

16··

Switching Languages· · · · · · · · · · ·

· 16·

Using PJLink protocol · ·

·17

Applicable commands · ·

·17

Glossary· · · · · · · · · · · · · · ·

18··

Trademarks · · · · · · · · · · ·

·18

The illustrations and screenshots in this manual may be different from those on your computer.

Request Regarding Security

When using this product, security breaches of the type described below are conceivable.

•• Leakage of your private information via this product

•• Illegal operation of this product by a malicious third-party

•• Harm to or cessation of operation of this product by a malicious third-party

Be sure to implement sufficient security measures.

•• Set passwords, and limit the users that are permitted login access.

•• Make sure the password is as hard to guess as possible.

•• Change the password periodically.

•• Panasonic Corporation and its affiliated companies never directly ask customers for their password.

Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.

•• Always use on a network that has safety protection such as a firewall implemented.

What you can do

<WEB control> (See page 9)

The following operations are possible when using WebBrowser.

•• Setting and adjusting the projector

•• Displaying the projector status

•• Setting for message transmission

<PJLink> (See page 17)

Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used.

•• Setting the projector

•• Querying the projector status

<Command control> (Refer to “SERIAL TERMINAL” in “Technical Information” of the Basic Manual.)

You can control the projector from a computer, using the control commands of the serial terminals.

If you use “WEB control”, “PJLink” or “Command control”, turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the projector. (See page 7)

Check your computer

Necessary environment for computers to be connected

•• First, check your computer to see whether or not it has a wired LANfunction.

LAN : “Glossary” (See page 18)

•• Before connecting the computer to the projector, be sure to check the following settings.

Check 1  For LAN cable

•• Is the cable properly connected?

•• Use LAN cable that is compatible with category 5 or above.

Check 2  Wired LAN settings

•• Is your wired LAN switched on?

•• Is your wired LAN adapter properly recognized?

•• Is your wired LAN adapter switched on?

•• Install the wired LAN adapter driver beforehand.

For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.

Check 3  For WebBrowser

•• WebBrowser is necessary to use WEB control.

•• Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0

Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body) causing a malfunction.

Connecting with Wired LAN

Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings.

11	Turn on the computer.
22	Make the network setting according to your system administrator.
22	If the projector settings are the default settings (See page 6), the computer can be used with the following network
	settings.

		IP ADDRESS	192.168.10.101
		SUBNETMASK	255.255.255.0
		DEFAULT GATEWAY	192.168.10.1

Panasonic PT-LB2E, PT-LB2EA, PT-LB2U, PT-LB1E, PT-LB1U User Manual

Network setting of the projector

When making a connection between a computer and a projector with settings other than the default settings, perform the procedure below to display the menu required when changing the initial settings.

Displaying the NETWORK menu

11	Press the [MENU] button on the projector.
11	The main menu appears.
	PICTURE		PICTURE MODE
	PICTURE		PICTURE MODE	DYNAMIC
	POSITION		CONTRAST	0
	LANGUAGE		BRIGHTNESS	0
	DISPLAY OPTION		COLOR	0
	DISPLAY OPTION		TINT	0
	PROJECTOR SETUP		TINT	0
	PROJECTOR SETUP		SHARPNESS	0
	SECURITY		SHARPNESS	0
	SECURITY		COLOR TEMPERATURE	DEFAULT
	NETWORK		DAYLIGHT VIEW		AUTO
		RETURN	NOISE REDUCTION		OFF
		RETURN	TV-SYSTEM		AUTO
	SELECT		TV-SYSTEM		AUTO
	SELECT
		ENTER
		FUNCTION

22	Select [NETWORK] with the [▲▼] buttons.
22	The network menu appears.
	PICTURE	WIRED LAN
	POSITION	NAME CHANGE
	LANGUAGE	NETWORK CONTROL	ON
	DISPLAY OPTION	STATUS
	DISPLAY OPTION	INITIALIZE
	PROJECTOR SETUP	INITIALIZE
	PROJECTOR SETUP

SECURITY

NETWORK

RETURN

SELECT

ENTER

FUNCTION

33 Press the [ENTER] button

You can select the sub-menu item.

Depending on the signals which are input to the projector, it may not be possible to adjust some of the items and use some of the functions. In the case of an item that cannot be adjusted or a function that cannot be used, the corresponding on-screen item will not be displayed, and you will not be able to execute it even when you press the [ENTER] button.

Network setting of the projector (cont.)

NETWORK

Wired LAN settings

You can make detailed wired LAN settings.

11 Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button.

		WIRED DETAILED SETUP
		DHCP

			OFF
		IP ADDRESS
		IP ADDRESS	192.168. 10.100
		SUBNETMASK	255.255.255.	0
		DEFAULT GATEWAY
		DEFAULT GATEWAY	192.168. 10.	1
		CANCEL
		SELECT
		OK	CANCEL
	DHCP
		ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
		acquired.
		OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
		ADDRESS ], [SUBNETMASK ] and [DEFAULT GATEWAY ].
		“Glossary” (See page 18)
22	Select each item with the [▲▼] buttons and change the settings following the
22	menu’s Operating guidance.

33 Select [OK] with the [▲▼] buttons and press the [ENTER] button.

Default network settings

The following settings are set before the projector leaves the factory.

DHCP	OFF
IP ADDRESS	192.168.10.100
SUBNETMASK	255.255.255.0
DEFAULT GATEWAY	192.168.10.1

+ 13 hidden pages