HEM-780
INSTRUCTION MANUAL
R
AUTOMATIC BLOOD PRESSURE MONITOR
MODEL HEM-780
SYSTOLIC
DIASTOLIC
START
ON/OFF
MEMORY
PULSE
/min.
M
DATE / TIME
SET
Automatic Blood Pressure Monitor
with ComFit
TM
Cuff
Model HEM-780
32
TABLE OF CONTENTS
Introduction …………………………………………………………… 3
Important Safety Notes ……………………………………………… 4
Know Your Unit ……………………………………………………… 5
Suggestions Before Taking A Measurement ………………………… 6
How To Install The Batteries ………………………………………… 7
How To Set The Date and Time …………………………………… 8-9
How To Apply The Arm Cuff …………………………………… 10-11
How To How To Take A Measurement ………………………… 12-13
How To Use The Memory Function ………………………………… 14
How to Use The AC Adapter ……………………………………… 15
Care And Maintenance …………………………………………… 16
Error Indicators ……………………………………………………… 17
FCC Statement ……………………………………………………… 18
Warranty Information ………………………………………… 19-20
Specifications………………………………………………………… 21
Notes …………………………………………………………… 22-23
INTRODUCTION
Thank you for purchasing the Omron HEM-780 IntelliSense
TM
AutomaticBlood Pressure Monitor with ComFit
TM
Cuff.
Fill-in for future reference
DATE PURCHASED: ______________
SERIAL NUMBER: ________________
Staple your purchase receipt here.
This completely automatic instrument quickly measures your blood
pressure and pulse rate. The measurement reading is clearly displayed
on a large digital panel.
Your new digital blood pressure monitor uses the oscillometric method
of blood pressure measurement. This means the monitor detects
your blood’s movement through your brachial artery and converts the
movements into a digital reading. An oscillometric monitor does not
need a stethoscope so the monitor is simple to use.
The Omron HEM-780 IntelliSense
TM
AutomaticBlood Pressure Monitor
is intended for home use.
SAVE THESE INSTRUCTIONS
54
KNOW YOUR UNIT
IMPORTANT SAFETY NOTES
To assure the correct use of the product basic safety measures should
always be followed including the precautions listed below:
þ Read all information in the instruction book and any other literature
included in the box before using the unit.
þ Contact your physician for specific information about your blood
pressure. Follow the instructions of your healthcare provider.
þ Operate the unit only as intended. Do not use for any other purpose.
þ The unit is intended for use in measuring blood pressure and pulse
rate in adult patient population. Do not use on infants.
þ Do not use a cellular phone near the unit. It may result in
operational failure.
þ Changes or modifications not approved by Omron Healthcare will
void the user warranty. Do not disassemble or attempt to repair the
unit or components.
ON/OFF
START
MEMORY
DATE / TIME
SET
AUTOMATIC BLOOD PRESSURE MONITOR
MODEL HEM-780
SYSTOLIC
DIASTOLIC
PULSE
/min.
M
AUTOMATIC BLOOD PRESSURE MONITOR
MODEL HEM-780
SYSTOLIC
DIASTOLIC
PULSE
/min.
MEMORY
DATE / TIME
SET
ON/OFF
START
Systolic Blood
Pressure Display
Heart Symbol
Date/Time
Setting Button
Date/Time Display
Pulse Display
Diastolic Blood
Pressure Display
Air Jack
START
Button
Main Unit:
ON/OFF
Button
MEMORY
Button
AC Adapter Jack
Air Tube
Green Mark
Air Plug (Connects to Air Jack)
Components:
Arm Cuff
AC Adapter
7
6
HOW TO INSTALL THE BATTERIES
1. Slide the battery cover off in the direction
of the arrow.
2. Install 4 “AA” size batteries so the
+ (positive) and – (negative) polarities
match the polarities of the battery
compartment as indicated.
3. Replace the battery cover.
NOTES: If the Low Battery Indicator appears on the
display, replace all four batteries.
Long-life alkaline batteries are recommended.
Remove the batteries if the monitor will
not be used for an extended period of time.
If the batteries are removed for a long period
of time, Date / Time display setting will need
to be reset. Refer to “How to Set the
Date and the Time”.
SUGGESTIONS BEFORE TAKING
A MEASUREMENT
1. Avoid eating, smoking, and exercising for 30 minutes before
taking a measurement. Rest for at least 15 minutes before
taking the measurement.
2. Stress raises blood pressure. Avoid taking measurements
during stressful times.
3. Remove tight-fitting clothing from your left arm.
4. Measurements should be taken in a quiet place.
5. Sit in a chair with your feet flat on the floor. Rest your left arm
on a table so that the cuff is at the same level as your heart.
6. Remain still and do not talk during the measurement.
7. Keep a record of your blood pressure and pulse readings for your
physician. A single measurement does not provide an accurate
indication of your true blood pressure. You need to take and record
several readings over a period of time. Try to measure your blood
pressure at the same time each day for consistency.
8. Wait 2-3 minutes between measurements. The wait time allows the
arteries to return to the condition prior to taking the blood pressure
measurement. You may need to increase the wait time depending on
your individual physical characteristics.
Loading...