LG SN05ACR, SN09ACR Manual book

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating your set and retain it for future reference.

TYPE : WALL MOUNTED

ArtCool

MODELS :

S05ACR S09ACR

*MFL62106320*

P/NO : MFL62106320

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2	TIPS FOR SAVING ENERGY

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

•Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

•Block sunlight with blinds or curtains while you are operating the air conditioner.

•Keep doors or windows closed tightly while you are operating the air conditioner.

•Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

•Speed up the fan to cool or warm indoor air quickly, in a short period of time.

•Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

•Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

SAFETY PRECAUTIONS 3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

! WARNING

It can result in serious injury or death when the directions are ignored

! CAUTION

It can result in minor injury or product damage when the directions are ignored

! WARNING

•Installation or repairs made by unqualified persons can result in hazards to you and others.

•Installation MUST conform with local building codes.

•The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.

•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

Installation

•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

•Always use a power plug and socket with a ground terminal.Failure to do so may result in electric shock or product failure

•Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.

•Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

•Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

•Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.

•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

•Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 SAFETY PRECAUTIONS

Operation

•Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

•Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.

•Do not place any objects on the power cord. It may result in electric shock or product failure.

•Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.

•Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

•Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.

•Do not allow water to run into the air conditioner. It may result in explosion or fire.

•Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.

•Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.

•When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.

•Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.

•Stop operating and close the window in strom or hurricane.If possible remove the product from the window before hurricane arrives

•Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.

•Contact an authorized service center when the air conditioner is submerged into water due to flooding. Failure to do so may result in explosion or fire.

•Be cautious water could not enter the product

•Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.

•Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

•Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

•Do not place any objects on the air conditioner. It may result in product failure.

SAFETY PRECAUTIONS 5

! CAUTION

Installation

•Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.

•Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.

•Keep level even when installing the product.

•Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not inconvenience the neighbors. Failure to do so may result in conflict between neighbors.

•When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.

•Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.

Operation

•Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.

•Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.

•Do not block the inlet or outlet of air flow. It may result in explosion or product failure.

•Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.

•Never touch the metal parts of the air conditioner when you remove the air filter. It may result in serious injury or product failure.

•Do not place any objects on the air conditioner. It may result in product failure.

•Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.

•Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.

•Do not drink the water drained from the air conditioner. It may result in serious health complications.

•Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.

•Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.

•Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.

•Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.

•If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6	TABLE OF CONTENTS

TABLE OF CONTENTS

	2	TIPS FOR SAVING ENERGY	13		ADVANCED FUNCTIONS
	3		13		Changing room temperature quickly
		IMPORTANT SAFETY	13		Indoor air purification
		INSTRUCTIONS	13		- Auto Clean operation
			14		Plasma Purification operation (Optional)
	7	BEFORE USE	14		Auto operation (Optional)
			15		Auto Changeover operation (Optional)
	7	Components
			15		Energy saving cooling mode
	8	Using the remote control	15		Display screen brightness
	9	- Inserting batteries	16		Operating the air conditioner without the
	9	- Installing the remote control holder			remote control
			16		Restarting the air conditioner
	10	BASIC FUNCTIONS			automatically
	10	Cooling your room	17		MAINTENANCE
	10	Removing humidity
			18		Cleaning the air filter
	11	Airing your room
	11	Adjusting the fan speed	18		Cleaning the anti-allergy filter and triple
	11	Adjusting the air flow direction			filter (Optional)
			18		Cleaning the plasma filter (Optional)
	11	Setting the timer
	11	- Setting the current time		19	TROUBLESHOOTING
	12	- Turning on the air conditioner
		automatically at a set time	19		Self-diagnosis function
	12	- Turning o the air conditioner
			19		Before requesting service
		automatically at a set time
	12	- Canceling the timer setting
	12	- Setting sleep mode

BEFORE USE	7

BEFORE USE

Components	Air inlet
Indoor unit		ON/OFF button

<![if ! IE]>

<![endif]>ENGLISH

Operation lamp Signal Receiver

Air outlet	Horizontal vane
	Ho

Vertical louver

* The feature can be changed according to type of model.

! NOTE

The number of operation lamps and their locations may vary, depending on the model of the air conditioner.

Outdoor unit

Air Inlet
	Connecting
	Wires
	Piping
Air Outlet
Base Plate	Drain Hose

* The feature can be changed according to type of model.

8	BEFORE USE

<![if ! IE]>

<![endif]>HGLISHNE

Using the remote control

You can operate the air conditioner more conveniently with the buttons for the additional functions under the cover of the remote control.

Wireless remote control

	C
	F
		Display
AM	ON	screen
hr.PM	OFF 123

FAN	E/SAVING	A/CLEAN
ON		MODE
OFF
	TEMP
FAN		JET
SPEED		COOL	Control
SWING	LIGHT	ROOM	panel
		TEMP
	TIMER	C/ F [5SEC]
SLEEP	ON	OFF

SET

CLEAR

TIME [3SEC]

Operation Mode

Cooling Operation

Artificial Intelligence or Auto changeover

Healthy Dehumidification Operation

	Control	Display	Description
	panel	screen

Air circulation button* : Used to circu- FAN late the room air without cooling or

heating.

E/SAVING	Energy saving button : Operates
	energy saving cooling.

A/CLEAN			Auto clean button : Remove such
			moisture.
OFF	-		On/Off button:
ON
			Temperature adjustment buttons: Ad-
		C	justs the room temperature when cool-
			ing and heating.
			Operation mode selection button* : Se-
			lects the operation mode.
MODE			Cooling operation (	) / Auto operation
			or auto changeover (	) / Dehumidify-
			ing operation ( )
FAN			Indoor fan speed button: Adjusts the
SPEED			fan speed.
JET			J et cooling/heating button* : Warms up
			or cools down the indoor temperature
COOL
			within a short period of time.
SWING			Air flow direction button: Adjusts the air

LIGHT	-	Light button : Adjusts the brightness
		of the indoor unit display.

	ROOM		Temperature display button: Displays
	TEMP		the room temperature.
	SLEEP	hr	S leep mode auto button* : Sets the
			sleep mode auto operation.

	ON	OFF	AM	ON	Timer button: Sets the current time and
			PM	OFF	the start / end time.
	SET			-	S et/clear button: Sets or cancels func-
	CLEAR				tions.
	TIME [3SEC]

-R eset button: Initialize the air conditioner settings.

*Some functions may not be supported, depending on the model.

	BEFORE USE	9
Inserting batteries	2 Fix the holder by fastening the 2 screws
Insert batteries before using the remote
control. The battery type used is AAA (1.5 V).
1 Remove the battery cover.

3 Slide the remote control into the holder.

2Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.

3 Reattach the battery cover.

! NOTE

If the display screen of the remote control starts to fade, replace the batteries.

Installing the remote control holder

Install the holder where there is no direct sunlight to protect the remote control.

1 Choose a safe and easily-accessible place.

Operating method

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

!NOTE

•The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

•For proper operation, use a soft cloth to clean the signal transmitter and receiver.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 BASIC FUNCTIONS

BASIC FUNCTIONS

Cooling your room

(Cool ing operation)

1	Press	ON	to turn on the power.
		OFF

2Press MODE repeatedly to select the cooling operation.

- is displayed on the display screen.

3Press or to set the desired temperature.

-The temperature range is 18°C (64.4°F)- 30°C (86°F).

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

1	Press	ON	to turn on the power.
		OFF

2Press MODE repeatedly to select the dehumidifying operation.

- is displayed on the display screen.

!NOTE

•In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.

ON

OFF

BASIC FUNCTIONS	11

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air without changing the room temperature. The cooling lamp lights up in air circulation mode. 1 Press to turn on the power.

2Press FAN turn on the air cuiculation operation.

- is displayed on the display screen.

3 Press	SPEED	to adjust the fan speed.
	FAN

Adjusting the fan speed

1 Press	SPEED	repeatedly to adjust the fan
	FAN

speed.

-Select if you want natural air. The fan speed adjusts automatically.

Adjusting the air flow direction

1

cally, SWING

tion automatically.

! NOTE

cause product failure.

•If you restart the air conditioner, it starts to operate with the previously set direc-

not match the icon displayed on the remote control. When this occurs, press

SWING

again.

Setting the timer

You can use the timer function to save energy

Setting the current time

1	Press	SET	and hold it for longer than 3 sec-
		CLEAR
	onds.

the display screen.

<![if ! IE]>

<![endif]>ENGLISH

12 BASIC FUNCTIONS

<![if ! IE]> <![endif]>ENGLISH	2	Press	or	to select the times.	Canceling the timer setting
	3	Press	SET		SET
			CLEAR
					Press CLEAR .
					- To cancel all timer settings, press	CLEARSET	.

Turning on the air conditioner automatically at a set time

1

Press

ON .

Setting sleep mode

tioner automatically when you go to sleep.

	1	Press	ON	to turn on the power.
the display screen.			OFF
	2	Press	SLEEP

3 Press or to select the hour (up to 7 hours).

4	Press	SET
		CLEAR

2	Press	or	to select the times.
3	Press	CLEARSET
4	When setting the timer, current time and
	ON icon are displayed on the display
	screen indicating that the desired time is
	set.

Ttomatically at a set time

1 Press OFF .

- is displayed on the display screen in sleep mode.

! NOTE

the display screen.					In the Cooling and Dehumidifying modes,
					the temperature increases by 1°C(1.8°F)
					after 30 minutes and by a further
					1°C(1.8°F) after another 30 minutes for a
					more comfortable sleep. The temperature
					increases with up to 2°C(3.6°F) from the
					preset temperature.

2	Press	or	to select the times.
3	Press	SET
		CLEAR
4	When setting the timer, current time and
	OFF icon are displayed on the display
	screen indicating that the desired time is
	set.

ADVANCED FUNCTIONS	13

ADVANCED FUNCTIONS

vanced functions.

Changing room temperature quickly

(Jet Cool)

This mode allows you to cool indoor air quickly in summer or warm it quickly in winter.

1	Press	OFF to turn on the power.
		ON
2	Press	COOL
		JET

-In jet cooling mode, strong air blows out at a temperature of 18°C (64.4°F)- 30°C

(86°F) colling.

!NOTE

•Powerful Cooling

-C/O Model

Enable in Cooling/Dehumidifying/Fan/

•This function may not be supported, depending on the model.

Indoor air purification

Auto Clean operation

In the cooling and dehumidifying operations, moisture is generated inside the indoor unit. Use the auto cleaning function to remove such moisture.

1Press A/CLEAN .

- is displayed on the display screen.

ates for 30 minutes and cleans the inside of the indoor unit.

! NOTE

Some buttons cannot be used while the auto cleaning function is in operation.

<![if ! IE]>

<![endif]>ENGLISH