Ordering number : EN4592A
Thick Film Hybrid IC
STK4050V
AF Power Amplifier (Split Power Supply) (200 W min, THD = 0.08%)
Features
•Compact packaging supports slimmer set designs
•Series designed from 20 up to 100 W (200 W) and pincompatibility (120 to 200 W have 18 pins)
•Simpler heat sink design facilitates thermal design of slim stereo sets
•Current mirror circuit application reduce distortion to 0.08 %
•Supports addition of electronic circuits for thermal shutdown and load-short protection circuit as well as pop noise muting which occurs when the power supply switch is turned on and off.
Specifications
Maximum Ratings at Ta = 25°C
Package Dimensions
unit: mm
4051A
[STK4050V]
Parameter |
Symbol |
Condition |
Rating |
Unit |
|
|
|
|
|
Maximum supply voltage |
VCC max |
|
± 95 |
V |
Thermal resistance |
θj-c |
|
0.95 |
°C/W |
|
|
|
|
|
Junction temperature |
Tj |
|
150 |
°C |
|
|
|
|
|
Operating substrate temperature |
Tc |
|
125 |
°C |
|
|
|
|
|
Storage temperature |
Tstg |
|
–30 to +125 |
°C |
|
|
|
|
|
Recommended Operational Conditions at Ta = 25°C
Parameter |
Symbol |
Condition |
Rating |
Unit |
|
|
|
|
|
Recommended supply voltage |
VCC |
|
± 66 |
V |
Load resistance |
RL |
|
8 |
Ω |
Operating Characteristics
at Ta = 25°C, VCC = ± 66 V, R L = 8 Ω , VG = 40 dB, Rg = 600 Ω , 100 k LPF ON, RL (non-inductive)
Parameter |
Symbol |
Condition |
|
Rating |
|
Unit |
|
|
|
|
|||||
min |
typ |
max |
|||||
|
|
|
|
||||
|
|
|
|
|
|
|
|
Quiescent current |
ICCO |
VCC = ± 80 V |
15 |
|
120 |
mA |
|
Output power |
PO |
THD = 0.08 %, f = 20 Hz to 20 kHz |
200 |
|
|
W |
|
Total harmonic distortion |
THD |
PO = 1.0 W, f = 1 kHz |
|
|
0.08 |
% |
|
Frequency response |
fL, fH |
PO = 1.0 W, + 0 dB |
|
20 to 50k |
|
Hz |
|
|
|
– 3 |
|
|
|
|
|
Input resistance |
ri |
PO = 1.0 W, f = 1 kHz |
|
55 |
|
kΩ |
|
Output noise voltage |
VNO |
VCC = ± 80 V, Rg = 10 kΩ |
|
|
1.2 |
mVrms |
|
Neutral voltage |
VN |
VCC = ± 80 V |
–70 |
0 |
+ 70 |
mV |
Note: Use rated power supply for test unless otherwise specified.
Output noise voltage represents the peak value on the rms scale (VTVM). The noise voltage waveform does not include the pulse noise.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
N3096HA (OT)/O2093YO 5-2612 No. 4592-1/3
STK4050V
Specified Transformer Power Supply
(MG-250 Equivalent)
Equiv
Application Circuit: 200W min Single Channel AF Power Amplifier
No. 4592-2/3