Service Bulletin
|
|
|
|
SB Number: |
SB PF-022 |
Creation Date: 22/06/2011 |
|
|
|
|
|
Subject: |
Abnormal sound from the feed clutch |
||
Model: |
PF-310/430 |
|
|
|
|
|
|
Phenomenon |
|
Abnormal sound may occur, when feeding the paper from the optional paper cassette after |
|
|
|
replacing the feed clutch. |
|
Cause |
|
There is a gap between the feed clutch and the fitting position. Under this condition, the side |
|
|
|
of the gear section at the feed clutch may contact the gear at the right side. (GER-0.8-25-OW) |
|
Solution |
|
The spacer (Poly slider: Thickness is 0.5mm) has been added between the Bushing |
|
|
|
(Bush 6P) at the feed clutch, and the stop ring (Clip) to fill the gap between the feed clutch |
|
|
|
and the fitting position. |
|
Old condition of |
New condition |
the feed clutch |
the feed clutch |
NG: There is a gap |
OK: There is |
between the feed |
between the |
clutch and the gear. |
clutch and the |
Parts |
|
The Added Spacer (Poly slider) fills the gap between the feed clutch and the gear.
Spacer
Stop ring (Clip) |
Bushing (Bush-6P) |
No. |
Old Parts |
New Parts |
Description |
Q’TY |
|
Interchange- |
Applicable |
|
|
No. |
No. |
|
|
|
ability |
|
model(s) |
|
|
|
|
Old |
New |
Old |
New |
|
1 |
305H280850 |
305H280851 |
ASY-BKT-MOT |
1 |
1 |
X |
O |
PF-430 |
|
5H280850 |
5H280851 |
|
|
|
|
|
|
2 |
305H380400 |
305H380401 |
ASY-BKT-MOT |
1 |
1 |
X |
O |
PF-310 |
|
5H380400 |
5H380401 |
|
|
|
|
|
|
3 |
305H280551 |
305H294010 |
+CLU-ASSY (*1) |
1 |
1 |
X |
O |
PF-310/ 430 |
|
5H280551 |
5H294010 |
|
|
|
|
|
|
Note *1: The latest CLU-assy contains the set of the feed clutch (Same as before), the spacer and the leaflet with the spacer installation procedure . (See page 2 for a sample of the leaflet)
Classification |
Entire stock rework |
In-field modification at next visit |
X In-field modification by case |
|
No modification necessary |
|
Field measure |
When the above mentioned phenomenon occurs or when replacing the feed clutch, please add |
|||||
|
the Spacer (Poly slider) between the feed clutch and the fitting position. |
|
||||
|
|
|
|
|
|
|
KMIS Service Department, Kyocera Mita Europe |
Page of 2 |
B068 / SB PF-022 |
||||
Loading...