Service Bulletin
Page 1/1
C320 / SB 2LV-003
SB Number: SB 2LV-003 |
Creation Date: 28/01/2013 |
Proper formatting of SSD (Optional HD-6) (Error code F264/
Subject: F27A)
Model: FS-2100D/2100DN/4100DN/4200DN/4300DN
Contents
Formatting of the SSD (Optional HD-6) may not be possible and system error F246 or F27A may appear, when the machine recovers from sleep mode while formatting as mentioned in “Operation route“ in the table below. CLEAR THE ABOVE MENTIONED ERROR CODES BY TURNING THE MAIN SWITCH OFF AND ON. Formatting will be possible afterwards. Execute [Format SSD] on the operation panel menu before the machine enters sleep mode.
|
Operation route |
Machine operation |
1 |
Unused SSD (HD-6) is installed in the main body |
[Format SSD] is displayed. |
|
and the main switch is turned ON. |
|
2 |
Main body operates until in enters sleep mode |
|
|
(Initial setting is 1 minute). |
|
3 |
Main body recovers from sleep mode. |
Models without network connection may indicate error code |
|
|
F27A afterwards. |
4 |
Formatting SSD (HD-6) is executed from the |
Network models may indicate error code F264 afterwards. |
|
operation panel menu. |
|
Classification |
Entire stock rework |
In-field modification at next visit |
X In-field modification by case |
No modification necessary |
Field measure |
Please note the content of this service bulletin. |
|||
|
|
|
|
|
KDIS Service Department, KYOCERA Document Solutions Europe B.V.