Haier LE32F2220, LE39F2280 User Manual

4.5 (2)

LED

LE32F2220

LE39F2280

 

Contents

Safety and warnings.......................................................................................

2-3

Introduction..................................................................................................

4

Base stand assembly......................................................................................

5

Installation...................................................................................................

6-9

Remote Control.............................................................................................

10

Operation.....................................................................................................

11-13

Troubleshooting...........................................................................................

14

Warranty.......................................................................................................

15

-1-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this Television near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings, install in accordance with the instructions.

8)Do not install near any heat sources such as radiations, heat registers, stoves, or other Television (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the Television.

11)Only use attachments/accessories specified by the manufacturer.

12)Unplug this Television during lighting storms or when unused for long periods of time.

13)Refer all servicing to qualified service personnel. Servicing is required when the Television has been damaged in any way, such as; power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Television, the Television has been exposed to rain or moisture, does not operate normally, or has been dropped.

14)Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

15)The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.

16)No naked flame sources, such as lighted candles, should be placed on the Television.

17)Attention should be drawn to the environmental aspects of battery disposal.

18)The use of Television in moderate climate.

19)The Television shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the Television.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literaturaccompanying this unit.

WARNING:

To reduce the risk of fire or electric shock, do not expose this Television to rain or moisture.

WARNING:

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING:

The excessive sound pressure from earphones and headphones can cause hearing loss.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only

identical replacement parts.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Haier is committed to safely recycling electronic products and product materials. Please check for a local recycling location in the United States at: 1800RECYCLING.COM or call 1.800.RECYCLING.

-2-

SAFETY AND WARNINGS

High voltages are used in the operation of this television receiver. Do not open the cabinet.

Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes on the back cover of the TV. Adequate ventilation is essential to prevent failure of electrical components.

Do not trap the power supply cord under the television receiver's stand.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual and/or damage to the television may result if it falls.

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on or near the television.

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the life of your television, and can also be dangerous.

-3-

INTRODUCTION

Main features

Accessories

Integrated ATSC TV tuner for HDTV broadcast reception

High brightness provides a vivid and brilliant picture

Deeper blacks and brighter whites with high contrast

Wide Screen aspect ratio (16:9) for a complete home theater experience

HDMI input for true digital connection

VGA port for connection to PC

Built-in stereo speaker system

Full-function Remote Control

Power cable...................................

1

Infrared Remote Control....................

1

Users Manual .................................

1

Battery(AAA)...................................

2

Main parameter

Viewing Picture Size (diagonal)

32 inches

39 inches

 

 

 

Resolution:

1366 x 768

1920 x 1080

 

 

 

Power supply

AC 100-240V 50/60Hz

 

 

 

Power consumption

50W

70W

 

 

 

Audio Output Power (THD 7%):

2x8W

 

Aspect Ratio:

16:9

 

 

 

 

TV System:

ATSC Digital system and NTSC Analog system

Video Signal System:

NTSC

 

 

 

 

Receiving Channel:

Cable :1-135/ Air: 2-69 (ATV&DTV)

 

 

 

High-Definition Multimedia Interface (HDMI) Input

x 2

 

 

 

 

Component (Y Pb Pr) Video Input

x 1

 

 

 

 

Composite Video Input

x 1

 

 

 

 

Analog RGB (VGA) Input

x 1

 

 

 

 

Audio Input

x 2

 

 

 

 

Headphone Output

x 1

 

 

 

 

Coaxial Output

x 1

 

 

 

 

USB Input

x 1

 

 

 

 

Horizontal definition (TV line)

Composite Video Input >=350

 

Video Input

>=400

 

YCb(Pb)Cr(Pr)

>=400

 

 

 

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

-4-

Base Stand Assembly Instruction

1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display. Position the base stand onto the bottom of the stand neck.

LE32F2220

LE39F2280

2. Attach the base stand to the stand neck firmly tightening the supplied screws.

Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

-5-

INSTALLATION

Front panel

 

 

 

 

 

Side panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

1

2

30 30

1:Remote control sensor.

2:Indicator LED: BLUE POWER ON.

RED STANDBY.

3:Panel keys

1 2 3 4 5

1.SOURCE: Display the input source menu.

2.MENU: Display main MENU.

3.CH+/CH-: In TV mode, press "CH+" or "CH-" to change the channel up and down. In MENU mode, press "CH+" or "CH-" to select items in standby mode, press "CH+" or "CH-" to turn on the TV.

4.VOL+/VOL-: Adjust sound level. In MENU mode, press "VOL+ " or "VOL- " to adjust the item that you selected.

5.STANDBY: Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

REAR Connections

COMPOSITE

COMPONENT

AC-INPUT

100-240V~50/60Hz

All the terminals are (from left to right):

POWER SOCKET, VIDEO, AUDIO INPUT, YPbPr INPUT

Note: AV and component (YPbPr) share the R and L audio inputs.

SIDE Connections

HEADPHONE

HDMI1

HDMI2

USB

VGA

PC AUDIO

COAXIAL

RF

All the terminals are (from left to right):

HDMI1, HDMI2, USB, VGA, PC AUDIO, HEADPHONE, COAXIAL, RF.

Note: 1. When HDMI has an input signal coming from a DVI source then the audio input signal must be connected to the PC audio input.

-6-

INSTALLATION

ANTENNA

Note:

Aerial connections: IEC (female).

Input impendance:75 unbalanced.

PC

STEPS:

Be sure both the TV and computer are powered off. 1.Connect a VGA and audio cable.

2.Connect the power cord.

3.Turn on the TV, switch to PC mode. 4.Turn on the PC.

HEADPHONE

HDMI1

HDMI2

USB

VGA

PC AUDIO

COAXIAL

RF

-7-

INSTALLATION

PC

PRESET MODE

 

RESOLUTION

V.Freq.(Hz)

H.Freq.(KHz)

1

720*400

70

31.47

2

640*480

60

31.47

3

640*480

75

37.50

4

800*600

60

37.88

5

800*600

75

46.88

 

 

 

 

6

1024*768

60

48.36

 

 

 

 

7

1024*768

70

56.48

8

1024*768

75

60.02

9

1280*1024

60

63.98

 

 

 

 

10

1280*1024

75

80.00

 

 

 

 

11

1366*768

60

67.50

 

 

 

 

-8-

INSTALLATION

AV EQUIPMENT

There are two HDMI ports located on the back of your TV. You can connect a Blu-ray player, DVD player, or other video equipment through these ports.

There is one component (Y, Pb, Pr) and one composite (AV) video input located on the back of your TV. You can connect a VCR, cable box, or other video equipment to these jacks. Please see the diagram below. You may also need to refer to the owner's manual of the device that you are trying to connect.

HEADPHONE

HDMI1

HDMI2

USB

VGA

PC AUDIO

COAXIAL

RF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

VIDEO EQUIPMENT with YPbPr

G B

R

W R

 

 

Y Yellow (video)

W White(audio L)

R Red(audio R or Pr)

B Blue(Pb)

G Green(Y)

W

R

COMPOSITE

AC-INPUT

100-240V~50/60Hz

W

R

VIDEO EQUIPMENT

W R

TO VIDEO

OUTPUTS

TO AUDIO OUTPUTS

G B R

COMPONENT

The television's inputs can be connected to the following types of equipment: VCR, multi disc player,

DVD, camcorder, video game or stereo system, etc.....

YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i.

-9-

 

 

 

 

 

REMOTE CONTROL

 

 

 

 

1: POWER

 

 

 

 

2:

Press to power ON/OFF (standby) the TV.

 

 

 

 

NUMBER KEY

 

 

 

 

 

Press to enter the TV channel number and select a channel

 

 

 

 

3:

(Press " " to choose the sub-channel).

 

 

 

 

Press to display the on screen display (OSD) menu or

 

 

 

 

 

 

 

 

 

 

return to the previous menu.

 

 

 

 

4: CURSOR

 

 

 

 

 

When the OSD menu is displayed on-screen, use these

YPbPr

CC

MTS

VGA

 

buttons as the up, down, left, right and ENTER buttons to

 

 

 

 

 

adjust the various options in the OSD menu.

 

 

 

 

5: EXIT

DTV

TV

AV

HDMI

 

Press to exit the OSD menu.

STRENGTH

6: VOL+/-

 

 

 

 

 

 

 

 

 

 

 

 

Press VOL+ or VOLto adjust the volume.

CH LIST

EPG

FAV

 

7: P.M

 

 

Press repeatedly to select a picture mode.

 

 

 

 

8:

 

 

 

 

Press to display or exit the TV input source menu.

 

 

 

 

 

 

 

 

 

9: MUTE

 

 

 

 

 

Press to switch the sound ON/OFF.

 

 

 

 

10: RECALL

 

 

 

 

 

Press to switch between the current and previously

 

 

 

 

 

viewed channel.

 

 

 

 

11: ENTER

 

 

 

 

 

Press to confirm a selection.

 

 

 

 

12: TV DISPLAY

 

 

 

 

 

Press to show the information about the current input source.

 

 

 

 

13: S.M

 

 

 

TV

 

Press repeatedly to switch audio modes.

 

 

 

DISPLAY

14: CH+/CH-

 

 

 

 

 

 

 

 

 

Press CH+ or CHto browse through the TV channels.

 

 

 

 

15: ASPECT

 

S.M

 

 

 

Press to change the picture aspect ratio.

 

 

 

16: CH LIST

VOL

 

 

CH

 

To display the channel list. Press to display the channel list.

 

 

 

In DVD mode, press to eject the disc.

 

P.M

 

 

17: EPG

 

 

 

 

Press to display the DTV Electronic Program Guide.

 

 

 

 

 

In DVD mode, press to go to the previous chapter.

 

 

 

 

18: FAV

 

 

 

 

 

Press to display the favorite channels list. In DVD mode,

 

 

 

 

 

press to go to the next chapter.

 

 

 

 

19: HDMI

 

 

 

 

 

Press to go directly to the HDMI input source.

 

 

 

 

20: AV

 

 

 

 

 

Press to go directly to the AV input source.

 

 

 

 

21: DTV STRENGTH

 

 

 

 

 

Press to display the DTV signal strength.

 

 

 

 

22: TV

 

 

 

 

 

Press to go directly to the TV input source.

 

 

 

 

23: YPbPr

 

 

 

 

 

Press hot key to go directly to the Component (YPbPr) input source.

 

 

 

 

24: CC

 

 

 

 

 

Press to turn on or off the closed captions.

 

 

 

 

25: VGA

 

 

 

 

 

Press hot key to go directly to the VGA input source.

 

 

 

 

26: MTS

 

 

 

 

 

Press to activate the NTSC TV sounds, such as Stereo,

 

 

 

 

 

SAP or Mono tone, and audio languages of DTV.

 

 

 

 

27: COLOR KEYS

 

 

 

 

 

Reserved keys

-10-

1. PICTURE MENU

In this menu,you can adjust the picture options here,

such as contrast, brightness, etc.

Press to select, press OK to adjust.

 

 

Picture Mode

Standard

 

 

Color Temperature

Normal

 

 

VGA Setting

Fill

 

 

Aspect Ratio

< Picture

 

Noise Reduction

Middle >

Note:

1)If you want to adjust contrast, brightness, color, and sharpness, the picture mode must be set to personal.

2)This will increase or decrease Warm (red) and Cool (blue) colors to suit your personal preference.

Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint.

Standard mode is the default setting, if you select some other options, the power consumption may change.

1.1 Advanced

When a PC is connected, you can adjust the PC advanced settings.

1)H-Pos: Adjust the horizontal position of the screen.

2)V-Pos: Adjust the vertical position of the screen.

3)Clock: Fine tune the screen width.

4)Phase: Fine tune the phase of the screen. Usually you don't adjust this item.

5)Auto: Auto adjust to fit the screen.

Advanced

H-Pos

H-Pos

Clock

Phase

Auto

MENU

2.AUDIO menu

In this menu, you can ajust the sound options here. Press to select, press OK to adjust.

 

Sound Mode

Standard

 

 

Audio Language

English

 

 

Digital Output

PCM

 

< Audio

Surround Sound

Off

<

Audio Only

Off

 

Auto Volume

Off

 

OPERATION

Note:

1)Audio language is available in ATSC/TVmode only.

2)Auto volume is available only when the input signal volume is too large or there is distortion.

3. TIMER MENU

In this menu, you can adjust the sleep timer, time zone, etc. Press to select,press OK to adjust.

 

Sleep Timer

Off

 

 

Time Zone

Pacific

 

 

DST

Off

 

< Time

Time Format

12-hour

<

Clock

----/--/-- --

Note:

1) Time zone, DST (Daylight Saving Time) and the clock are available in ATSC mode only, and the Clock can't be adjusted.

4.OPTION menu

In this menu, you can adjust the Menu language, Closed Caption, Restore Default etc.

Press to select, press OK to adjust.

 

 

Menu Language

English

 

 

Closed Caption

 

 

 

Restore Default

 

< Option

 

Setup Wizard

<

 

Software Update

 

 

 

 

 

 

 

 

 

 

 

 

4.1 Closed Caption

CC Mode

CC Off

Basic Selection CC1

Advanced Selection Servicel

Option

MENU

-11-

OPERATION

1). CC Mode: Switch the closed caption mode.

2). Advanced selection: only available in ATSC.

3). Option: Used to edit the CC font.

Note:

1). Restore Default: Restore Default will clear all the programs and reset all the settings to default value.

5.LOCK MENU

In this menu, you can change the password and adjust the vchip settings.

Enter the password, to enter the lock menu. The factory default password is 0000.

 

 

Change Password

 

 

 

System Lock

Off

 

 

US

 

< Lock

 

Canada

<

 

RRT Setting

 

 

Resel RRT

 

 

 

 

 

 

 

 

 

 

 

 

 

5.1 Change Password

1). Old password: Input the old password.

2). New password: Input the new password.

3). Confirm password: Input the new password again.

5.2 System Lock

When the System Lock switch is ON, the options listed below can be adjusted.

5.3 US

Press the OK button to display the following screen.

TV

MPAA

MENU

OK

1). TV: Press the OK buttonto display the following screen.

 

TV RATING

 

 

 

ALL

 

 

 

FV

 

 

 

V

 

 

 

S

 

 

 

L

 

 

 

D

 

 

MENU

OK

 

 

 

 

 

 

 

Content

 

 

 

 

 

 

 

 

 

Rating

 

Content

FV

V

S

L

D

 

(Fantasy

(Violence)

(Sexual

(Adult

(Sexually

 

 

 

violence)

 

situation)

language)

suggestive

 

 

 

 

 

 

 

dialog)

 

TV-Y (All

 

 

 

 

 

 

children)

 

 

 

 

 

 

 

 

 

 

 

 

 

TV-Y7(Direct to

X

 

 

 

 

Suggested

order children)

 

 

 

 

age

TV-G(General

 

 

 

 

 

 

audience)

 

 

 

 

 

 

TV-PG(Parental

 

X

X

X

X

 

Guidance

 

 

suggested)

 

 

 

 

 

 

TV-14(Parents

 

X

X

X

X

 

strongly

 

 

cautioned)

 

 

 

 

 

 

TV-MA(Mature

 

X

X

X

 

 

audience only)

 

 

 

 

 

 

 

 

 

 

And use the ENTER key to lock/unlock Parental Controls .

2). MPAA: Switching the movie-rating control level; N/A, G, PG, PG-13, R, NC-17, X.

Rating

Description

 

 

 

 

G

General audiences, All Ages admitted

 

 

 

 

PG

Parental Guidance suggested. Some material may not be

 

Suitable for children.

 

 

Age

PG-13

Parents strongly cautioned. Some material .may be

Inappropriate for children under 13.

 

 

 

 

R

Restrict. Under 17 requires accompanying parent or adult

 

guardian(age varies in some jurisdictions)

 

 

 

 

 

 

NC-17

No one 17 and under admitted.

 

 

 

 

X

X is an older rating that is unified with NC-17 but may be

 

encoded in the data of older movies.

 

 

5.4 Canada

Press the OK button, to display the following screen.

Canada

Canada Eng

Canada Fre

MENU

OK

1). Canada English: Switching the English rating control level: EXEMPT, C, C8+, G, PG, 14+, 18+.

-12-

OPERATION

Rating

Description

EExempt: Includes news, sports, documents and other information programming: talk shows, music videos, and variety programming.

CChildren: Intended for younger children under the age of 8 years. Pays careful attention to themes that could threaten their sense of securityand well-being.

C8+ Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen .

GGeneral: Considered acceptable for all age groups, Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.

Age PG Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.

14+ Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline But it must be integral to the devel opment of plot or character. Language usage could be profane and nudity , present within the context of theme.

18+ Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of secretary and nudity.

2). Canada French: Switching the French-rating control level: E, G, 8ANS+, 13 ANS+, 16ANS+, 18ANS+.

Rating

Description

E Exempt programming

GGeneral :All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner .

 

8ans+

General but inadvisable for young children :May be viewed by a

Age

wide public audience, but could contain scenes disturbing to

children under 8 who cannot distinguish between imaginary and

 

 

 

 

real situations. Recommended for viewing with paren.

 

 

 

 

13ans+

Over 13 years: Could contain scenes of frequent violent scenes

 

 

and in tense violence.

 

 

 

 

16ans+

Over 16 years: Could contain frequent violent scenes and violence.

 

 

 

 

18ans+

Over 18 years: Only for adult viewing. Could contain frequent

 

 

violent scenes and extreme violence.

5.5 RRT setting

in ATSC digital TV mode, it can be adjusted

5.6 Reset RRT:

Press OK button, the screen will be displayed as follow:

6. Channel MENU

In this menu, you can adjust digital and analog TV Channels.

Press to select, press OK to adjust.

 

Air/Cable

Cable

 

Auto Scan

 

 

Favorite

 

< Channel

Show/Hide

<

DTV Signal

6.1 Air/Cable:

Select Air TV signal and cable TV signal.

6.2 Auto Scan:

If it's the first time you use the TV, you should scan all the TV channels first.

Press the OK button to confirm, to display the following screen.

Auto Scan

Scan all channels

Digital channel only

Analog channel only

MENU

OK

Press the OK button to select a scan type, you will see the message below which indicates that the auto search is in progress.

Auto Scan

DTV+ATV

Found:

0

Programme(S)

 

 

 

Analog:

0

Programme(S)

 

 

 

Digital:

0

Programme(S)

 

 

 

 

 

 

1%...

 

RF CH 2 DTV

 

 

 

6.3 Favorite:

Press the OK button to choose/delete favorite channels.

6.4 Show/Hide

Press the OK button to display/ hide the current channel.

6.5 DTV signal

Display DTV strength signal. It can't be selected or adjusted.

-13-

Haier LE32F2220, LE39F2280 User Manual

TROUBLE SHOOTING

microwave, electronic equipment,

car/motorcycle, fluorescent light

Component (Y Pb Pr) connections

The LCD TV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white. Please note this does not affect the performance of the product.

-14-

Loading...
+ 32 hidden pages