FY-602 Data radio
User’s Manual
Guilin Feiyu Electronic Technology Co, Ltd.
Addr ： 4th Floor,Yu Tai Jie Science&technology Building, Information Industry Park,
ChaoYang Road ,Qi Xing District , Guilin 541004, China.
Website：http://www.feiyudz.cn
E-mail：service@feiyu-tech.com
GuiLin FeiYu Electronic Technology Co., Ltd
Dear Pilot,
Thank you for purchasing the FY-602 data radio from FeiYu Tech.
In order to achieve full potential and safe operation of this product, please carefully read this manual
prior to installation.
About FY-602
FY -602, the Low power wireless module, is used as the wireless data transmission in short distance.
With the small size, weight and power consumption and good stability and reliability, it has the function
of bi-directional data sign transmission, test and control.
It is used for Wireless meter reading, such as water meter, electric meter and gas meter, parking meter,
intellective card, electronic weighing apparatus, meter for checking on work attendance, queue wireless meter,
building control, shipping company control, alarm system, intelligent equipment, Automatic data collecting
system; Industrial remote control and remote test building automation, safety and security, powerhouse
equipment wireless monitor, entrance control system, etc. It provide the USB power interface to be convenient
for the mini computer and PC users if necessary.
FY-602 Feature
1.Ultra low power transmission
Transmission power: 500mW, high receiving sensitivity: -123dbm,
Size: 63mm*43mm*15mm
2. Low power consumption
Receiving current<45mA, transmission current<360Ma, sleeping current <1mA.
3. Saving power model
FY -602 have three saving power models: awaken from Hardware, awaken from COM Port, awaken from
Air;
4. ISM frequency band, not requiring on application of frequency point
Carrier frequency of 433MHz，also capable of 915MHz.
5. High anti-interference and low BER (Bit error Rate)
Based on the GFSK modulation mode, it adopts the efficient communication protocol. The actual bit error
rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is
6. Long transmission distance
Within the range of visibility, the reliable transmission distance is（BER=10-3/1200bps） >3000m when the
antenna height is greater than 3m (BER=10-3/9600bps).
7. Transparent data transmission
Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data
generated in the air can be filtrated automatically (What has been received is exactly what has been
transmitted). The charge time for receiving and sending <10ms
8. Multi-channel and speed
The standard FY-602 configuration provides 16 channels. to meet the multiple communication combination
mode of the users. It has baud rate to be chosen such as 1200bps、2400bps、4800bps、9600bps、19200bps、
38400bps. The wireless transmission rate is direct ratio with baud rate of interface to meet user’s equipment
requirement.
9. High speed wireless communication and Large data buffer
When the speed rate in the air is quicker than interface’s, allowing to transmit unlimited length data at one
time, when the speed rate is slower or equal the interface’s, allowing the transmission of 255 Bytes long data
frames at one time for more flexible programming by users.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
Page 1
GuiLin FeiYu Electronic Technology Co., Ltd
TX/RX indicator light
Red: TX , Green :RX
User interface
Antenna socket
10. Intelligent data control and the user doesn’t need to prepare excessive programs
Even for semi duplex communication, the user doesn’t need to prepare excessive programs, only
receiving/transmitting the data from the interface. FY-602 will automatically complete the other operations,
such as transmission/receiving conversion in the air, control, etc.
11. High reliability, small and light
Single chip radio- frequency integrated circuit and single chip MCU are used for lessened peripheral
circuits, high reliability, and low failure rate.
12. Watchdog monitor
Watchdog monitors the inner function, so it can change the traditional product structure and improve the
product reliability.
Application of FY-602
1. Appearance figure
2. FY-602 interface definition
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
FY -602 figure
Page 2
GuiLin FeiYu Electronic Technology Co., Ltd
Item
no
PIN
Description Level
Connected to the terminal
User terminal
Remarks
1
SLE
Sleep control (input) end
Low level to sleep, High
level awake
2
TXD/ A
(RS-485)
Serial data transmitting
end
RXD/ A (RS-485)
3 RXD/ B
(RS-485)
Serial data receiving end
TXD/ B (RS-485)
4
GND
Power supply/Ground
DGND/AGND
5 VCC
+5±0.5V
+5±0.5V
TTL 3V user’s choose
6
I2
No use
retain
7
I1
No use
retain 8
O2
No use
retain 9
O1
No use
retain
User’s equipment
+5v regulator n. power supply
transmitter-receiver
1）User’s interface
FY -602 have one interface of TTL.
FY -602 standard interface: when the antenna upward, the plastic socket gap upward, from left to right,1-9
pin in turn, as follows:
(Remarks: Jack space between is 2.0 mm.)
Definition of connecting pins and connection method:
Remarks:
To avoid to connect the interface reversely and can not communicate, please check and assure the voltage of
2 and 3 pin is existing by using multimeter. If there is one pin that has the voltage, another has not voltage,
which means the interface is connected reversely, pls. Change the connection wires between pin 2 and 3
2) Power supply
FY -602 uses DC power supply with voltage of +5V.
It can also share power with other equipment, however, the high quality power with desirable ripple
factor should be selected. In addition, the reliable grounding must be used if there is other device in the system
equipment. In case of failure to connect with the earth, it can form its own grounding ,but it must be absolutely
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
Page 3
GuiLin FeiYu Electronic Technology Co., Ltd
separated from the municipal electric supply.
3.Saving power model
FY -602 have three Power-Saving models: Awaken from Hardware, Awaken from COM Port, Awaken
from Air. The model can be set by RF Module software. The user can choose Power-Saving model, the default
model is “Awaken from Hardware”.
1) Awaken from Hardware:
In this model, the current is under 100uA.
Sleeping status: when you input low level at NO. 5 pin, FY-602 can sleep, but it can not transmit and
receive data.
Normal work status: when you input High level at NO. 5 pin, FY -602 turn into Normal work status, 10ms
later, it can transmit and receive data.
Remarks: if you keep the NO. 5 pin untouched, then FY-602 is in Normal work status.
2) Awaken from COM Port:
When FY -602 in this model, the current is under 11mA.
When you input data with COM port, FY-602 turn into Normal work status after 10mS and can transmit
the data.
When FY -602 not receive data in COM port in 20 seconds , FY-602 will turn into sleep status.
3) Awaken from Air:
In this model, the current is under 20mA.
When in this status, FY-602 works intermittently.
When FY -602 received data from air, FY-602 will turn into Normal work status after 10ms, It can receive
data normally.
When FY-602 not receive data from air in 20 seconds, It will turn into sleep. So when you choose
Awaken from Air, you can transmit some useless data firstly.
FY-602 parameters setting
The interface of FY-602 is TTL.
FY -602 main parameters: COM baud rate and verify，RF baud rate, Channel and frequency.
You can change these parameters by our RF Module soft. When RF baud rate is faster than COM baud
rate，One frame Can transmit limitless data. When RF baud rate is not faster than COM baud rate ，One frame
Can transmit 255 bytes most. You can set the rate according your need.
The general Power supply is 5V DC.
Two FY-602 communication must have condition as follow:
1. Their channels (i.e. frequency) are the same.
2. Their RF rates are the same.
3. RF Module Com baud rate and verify is comply with its equipment or PC.
Parameters default value:
Channel： 5
Interface speed rate：19200BPS
Interface verify：none
Speed rate in air：19200BPS
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
Page 4
GuiLin FeiYu Electronic Technology Co., Ltd
Channel
Frequency
Channel
Frequency
1
430.2000MHZ
9
458.5250MHZ
2
431.4288MHZ
10
459.1250MHZ
3
431.7360MHZ
11
459.5250MHZ
4
430.5072MHZ
12
460.1250MHZ
5
434.6940MHZ
13
460.5250MHZ
6
434.2332MHZ
14
461.1250MHZ
7
433.1580MHZ
15
461.5250MHZ
8
433.9260MHZ
16
462.1250MHZ
JZ
877
-T
Company Logo
With shell
T: TTL interface
Channel and frequency list
Technical specification of FY-602
Modulation mode: GFSK
Working frequency: 433MHZ
Transmission power: 500mW
Receiving sensitivity: -123dBm
Transmitting current: <360mA
Receiving current: <45mA
Sleeping current: < 1mA
Channel speed rate: 1200/2400/4800/9600/19200/38400Bit/s, user can Choose one
Interface speed rate: 1200/2400/4800/9600/19200/38400Bit/s, user can Choose one
Change time for receiving and sending: <10ms
Interface data format: 8E1/8N1/8O1
Power supply: 5±0.5V DC
Working temperature: -20℃～85℃
Working humidity: 10%～90% relative humidity without condensation
Dimension: 64mm*43mm*15mm
Attachable Communication with Model: FY -602/ FY-605
Model and name
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
Page 5
GuiLin FeiYu Electronic Technology Co., Ltd
Item
Trouble
Trouble causes and solve ways
1
No shine of
Indicator light
a、Power Line badness touch .
b、Power is bad.
c、Power line meet in reverse, or diode of polarity protect is bad.
2
No transmitting or
receiving
a、Radio is badness touch with PC/terminal.
b、Radio with TTL not match terminal.
c、RX frequency and TX frequency is not same.
3
High Bit error rate
a、antenna not match, or touch bad;
b、RF baud rate is not right.
c、Power supply ripple is too great.
4
Indicator light
twinkling
a、Electromagnetism disturb in circumstance.
b、Same frequency disturb in the circumstance.
Optional Antenna:
Trouble and solve ways:
——END——
Note: We reserve the right to change this manual at any time! And the newest edition
will be shown on our website www.feiyudz.cn.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
Page 6
Loading...