EMERSON ADN2.5-24-1PM, ADN4-24-1PP, ADN4-24-1PM, ADN5-24-1PM, ADN10-24-1PM User Manual
...
60-480 Watts
ADN Series
|
Total Power: |
60 - 480 Watts |
|
Input Voltage: |
115/230 VAC |
|
# of Outputs: |
One |
|
|
|
|
|
|
Electrical Specs
Special Features
• Power Factor Correction
• Auto Select 115/230 VAC, 50/60 Hz Input
• All Single Phase models meet SEMI F47 Sag Immunity
• Class 1, Div 2 Hazardous Locations
• DC OK Signal
• Adjusable Voltage
• Industrial grade design (no derating to 60°C)
• User-friendly front panel
• Single and three phase inputs available
• Highly efficent >90% switching technology
• High MTBF and reliability
• Peak current capability 2x rated current for 2 seconds
• Three year warranty
• NEC Class 2 on models <100W
Environmental
Storage/Shipment |
-25°C to +85°C |
Operating (convection) |
-10° C to +60° C (derate |
|
to 50% at +70° C) |
Humidity |
<90% RH noncondensing per |
|
IEC 68-2-2, 68-2-3 |
|
IP20 (EN60529), protection |
|
from moisture & condensation |
Input
Nominal voltage |
115/230 VAC auto select |
Power factor (PFC) |
EN61000-3-2 |
AC Input range |
85-123 / 176-264VAC |
DC Input range |
210-375VDC |
Frequency |
47-63 Hz, 500 Hz |
Output
Nominal voltage |
24V (22.5-28.5VDC Adj.) |
Holdup time |
> 20ms at full load (25°C) |
Tolerance |
< ±2 % overall |
|
(combination line/load/time/temp) |
Tolerance |
< ±2 % overall |
Line regulation |
<0.5% |
Load regulation |
<0.5% |
Time & temp. drift |
<1% |
Initial voltage setting |
24.5V ± 1% |
Ripple |
< 50mVpp |
Power back immunity |
> 35V |
Parallel Operation |
|
ADN20-24-1PM |
Switch selectable |
All others |
Jumper selectable via front panel |
Over voltage protection |
< 33VDC |
|
EMC |
Safety |
|
|
|
|
|
|
|
|
|
|
Emissions |
EN 61000-6-3, Class B EN55011, EN55022 Radiated |
|
||
|
|
Conducted including Annex A |
|
|
|
|
Immunity |
EN 61000-6-2, EN61000-4-2 Level 4, EN61000-4-3 |
|
|
Level 3, EN61000-4-6 Level 3, EN61000-4-4 Level 4 |
|
|
|
|
|
input and level 3 output. EN61000-4-5 Isolation class |
|
|
4, EN61000-4-11, Transient protection according to |
|
|
|
|
|
VDE 0160/W2 over entire load range. |
|
Approvals |
EN60950, UL508 Listed, cULus, UL 60950, cURus, CE |
|
||
|
|
(LVD 73/23 & 93/68/EEC), (EMC 89/336 & 93/68/EEC). |
|
|
|
|
|
EN61000-3-2, EN60079-15 (Class 1, Division 2 |
|
|
hazardous location, Groups A, B, C, D w/ T3 temp |
|
|
|
|
|
class up to 60°C Ambient.) SEMIF47 Sag Immunity. |
|
|
For models <100W, UL60950 testing to include |
|
|
|
|
|
approval as NEC Class 2 power supply acc. To NFPA 70 |
|
|
art. 725-41 (a)(2). |
|
|
|
|
Protection |
Class 1 (IEC536), degree of protection |
|
||
|
|
SELV rated per EN60950 |
190 |
Technical Support: (888) 41ASTEC or (407) 241-2752 |
|
||
|
||||
|
Americas: (760) 930-4600 |
Europe (UK) 44 (1384) 842-211 |
Asia (HK) 852-2437-9662 |
|
rev 09.08.05
Loading...