|
|
ITEM # _______________________________________________ |
||
|
|
MODEL # _____________________________________________ |
||
|
Warewashing |
PROJECT NAME # ______________________________________ |
||
|
SIS # _________________________________________________ |
|||
105″ Multi Tank Conveyor Dishwasher |
||||
|
|
|||
|
WT105 |
AIA # _________________________________________________ |
||
|
|
|
|
|
|
|
|
|
|
|
|
Main features |
||
|
|
|||
|
|
• DUO Rinse. Unit to feature 23″ rinse tank with two rinse arms (top and bottom). |
||
|
|
• Large 40 gallon wash tank with two wash pumps. 3 HP wash pump for top |
||
|
|
wash arms and 1.5 HP wash pump for lower wash arms. Wash arms specifically |
||
|
|
designed for maximum soil removal. |
||
|
|
• Built in atmospheric booster system with air break. |
||
|
|
• Built in rinse booster pump guarantees constant rinse pressure. |
||
|
|
• Speed of conveyor can be set through the control panel by the operator. |
||
|
|
250 racks/hr or 350 racks/hr. |
||
|
|
• Large counter balanced inspection doors in pre wash, wash and rinse sections |
||
|
|
allow unrestricted all round access to the wash and rinse area. Door is insulated |
||
|
|
with injected foam. This adds strength as well as reduces noise and heat loss. |
||
|
|
• Large filters sloping towards the front to the smaller pressed filter box for quick |
||
|
|
removal. Filters feature holes smaller than the concave ant-block wash nozzles so |
||
|
|
large food cannot enter and block the wash system. Filters easy to remove from |
||
Warewashing |
|
pre wash as well as wash sections. |
||
|
• Adjustable feet for full access underneath the machine for cleaning. |
|||
105" Multi Tank Conveyor Dishwasher |
||||
• Push button self cleaning cycle of all tanks for ease of “end of day” cleaning. |
||||
WT105 |
|
|||
|
• Rinse chamber without internal pipes and therefore no hidden dirt traps. |
|||
534186 (WT105BL208) |
105″ Conveyor Dishwasher. |
• Wash chamber without internal pipes and therefore no hidden dirt traps. |
||
|
Left to Right - 208 V |
• Pre wash chamber without internal pipes and therefore no hidden dirt traps. |
||
534187 (WT105BR208) |
105″ Conveyor Dishwasher. |
• Self draining wash pumps provide maximum hygiene with no smells and all |
||
|
Right to Left - 208 V |
|||
|
wash and rinse zones drain automatically at the push of a button. |
|||
534188 (WT105BL240) |
105″ Conveyor Dishwasher. |
|||
• Heavy duty stainless steel wash pump (impeller and housing). |
||||
|
Left to Right - 240 V |
|||
|
• Pre wash section uses cold water so food remains are not “baked” onto the plates. |
|||
534189 (WT105BR240) |
105″ Conveyor Dishwasher. |
|||
• Deep drawn pressed 40 gal wash tank with fully rounded corners, sloped towards |
||||
|
Right to Left - 240 V |
|||
|
|
the drain to prevent dirt build up provides fast drainage in only a few minutes. |
||
Short Form Specification |
Pressed wash tank with no welded points offer a guaranteed water tight solution. |
|||
• Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners. |
||||
|
|
• Dishwasher structure is held together with a solid 2″ × 2″ stainless steel tube |
||
Item No. ___________________________________ |
sub-frame to provide long term sturdiness. |
|||
• All main components made in heavy duty anti-corrosive 304 type stainless steel: |
||||
Unit to be Electrolux WT105 Hot Water Sanitizing 105² multi tank con- |
tanks, panels, pre-wash, wash & rinse arms and caps, doors, front, handle, rear |
|||
veyor dishwasher with built in 40°F rise hot water booster. Electrical |
and side-panels and rack transportation system. |
|||
characteristics to be ____ 208 V or ____ 240 V three phase operation. |
• Pre-wash, wash and rinse arms can be easily removed for cleaning. |
|||
Unit to operate from ___ left to right or ____ right to left. Unit to include |
• IPX5 (NEMA4) water protection ensures no damage from cleaning. |
|||
22² cold water pre wash zone with powerful 0.5 HP pump motor. Wash |
||||
• Autostart/stop ensures that the machine runs only when a rack is passing |
||||
zone with two individual wash pumps. 3 HP wash pump for top wash arms |
||||
through it. This reduces both water and energy consumption. |
||||
and 1.5 HP wash pump for lower wash arms. Unit to feature 23² DUO rinse |
||||
area with atmospheric built in booster system and built in rinse booster |
• Internal curtains made of silastic material and are not affected by detergent or heat. |
|||
pump thus guaranteeing rinse pressure during rinse cycle. Unit to feature |
• Electronic control panel features large display for reading of pre wash, wash and |
|||
two conveyor speeds which can be selected from the control panel by |
||||
rinse temperatures. |
||||
the operator, 250 racks/hour or 250 racks/hour. Maximum water con- |
||||
• Low water consumption. At 350 racks per hour, the machine uses only 87 gal/hr |
||||
sumption at 350 racks/hour of |
only 87 gal/hour (0.3 gal/rack). Unit to |
|||
(0.3 gal/rack). |
||||
feature large heat and noise insulated front counter balanced door in pre |
||||
wash, wash and rinse tanks for easy access of internal components. |
• Machine predisposed for external detergent and rinse aid connections. |
|||
Unit to feature as standard end of day self cleaning cycle. Drain of water |
|
|
||
from the machine can be done through the control panel. Large deep |
Included Accessories |
|||
drawn 40 gal wash tank for extended wash sessions. |
||||
• Vent cowls (left and right side). |
||||
Covered by Electrolux Platinum Star® Service Program two-year parts |
||||
• One open sided dishwasher rack for trays. |
||||
and one-year labor warranty, installation start-up and performance check- |
||||
up after one year from installation. |
• Rack for cups. |
|||
|
|
• Rack for dinner plates. |
||
|
|
Optional Accessories |
||
|
|
|||
|
|
• Ventilation activation kit. |
3048424
Approval: ___________________________________________
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
WT105 Dishwasher Conveyor Tank Multi 105" |
Warewashing |
|
|
Electric
Supply voltage: |
534186 (WT105BL208) |
208 V/3ph/60Hz |
|
534187 (WT105BR208) |
208 V/3ph/60Hz |
|
534188 (WT105BL240) |
240 V/3ph/60Hz |
|
534189 (WT105BR240) |
240 V/3ph/60Hz |
Dishwasher requires two separate electrical service connections. Connection 1 for RINSE MODULE; Connection 2 for PREWASH AND WASH MODULE. Refer to below table for Amp requirements.
Connection 1: |
208 V/3ph/60Hz |
71A |
|
240 V/3ph/60Hz |
62A |
Connection 2: |
208 V/3ph/60Hz |
69A |
|
240V/3ph/60Hz |
62A |
Total Amp Load: |
208 V/3ph/60Hz |
136.1A (44.4 kW) |
|
240 V/3ph/60Hz |
121.1A (44.4 kW) |
Exhaust Requirements
Unit supplied as standard with extended vent hoods (can be removed during installation if not required).
Exhaust extraction not more than 177 CFM (300m³/h)
Refer to installation diagram for minimum exhaust hood installation height .
Key Information
Productivity racks per hour |
350 racks / 6300 dishes |
(max speed): |
(average 18 dishes per rack) |
Productivity racks per hour |
250 racks / 4500 dishes |
(min speed): |
(average 18 dishes per rack) |
Table to Table connection: |
106-1/4″ (2698 mm) |
Number of Tanks: |
3 |
Height with door open: |
83-7/16″ (2119 mm) |
Charging hole size (width): |
20-7/8″ (530 mm) |
Charging hole size (height): |
19-3/4″ (501 mm) |
Shipping weight: |
1327 lb (602 kg) |
Shipping width: |
129-15/16″ (3300 mm) |
Shipping depth: |
40-15/16″ (1040 mm) |
Shipping height: |
81-1/8″ (2060 mm) |
Shipping volume: |
148 cu.ft (4.183) |
Noise level: |
<70 dBA |
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.
Warewashing
105″ Multi Tank Conveyor Dishwasher
WT105
Water
Inlet Water supply pressure: |
22 – 102 psi (150 – 700 kPa) |
Inlet Cold Water Supply Temperature |
39 – 59 °F (4 - 15 °C) |
for pre wash section: |
|
Inlet Hot Water Supply Temperature |
140 °F (60 °C) |
for wash and rinse section: |
|
Inlet Water supply hardness: |
4-8 gpg (7-14 °fH) max |
Incoming Cold Water line size |
G 3/4″ |
(pre wash): |
|
Incoming Hot Water line size |
G 3/4″ |
(wash and rinse section): |
|
Drain line size (pre wash section): |
G 1-1/2″ |
Drain line size (wash section): |
G 1-1/2″ |
Drain line size (rinse section): |
G 1-1/2″ |
Hot Water consumption: Gallons/hr: |
87 gal/hr (330 liters/hr) |
Water consumption/rack: |
0.3 gal/rack (0.75 l/rack) |
Pre wash Temperature: |
< 105 °F (<40 °C) |
Pre wash tank size: |
11.8 gal (45 liters) |
Pre wash pump power: |
0.5 hp (0,37 kW) |
Pre Wash water flow: |
39 gal/min (150 l/min) |
Wash Temperature: |
160 – 172 °F (71-78 °C) |
Wash tank size: |
40 gal (150 liters) |
Wash pump power (top wash arms): |
3 hp (2.2 kW) |
Wash pump power (lower wash arms): |
1.5 hp (1.2 kW) |
Power Rinse Temperature: |
160 – 172 °F (71-78 °C) |
Power rinse tank size: |
6 gal (23 liters) |
Rinse pump power: |
0.4 hp (0.32 kW) |
Final Rinse Temperature: |
180 – 194 °F (82-90 °C) |
Final Rinse water flow: |
79 gal/min (300 l/min) |
Hot water booster capacity: |
3 gal (11.3 liters) |
Initial fill Hot Water requirements: |
40 gal (150 liters) |
Initial fill Cold Water requirements: |
11.8 gal (45 liters) |
Warewashing |
|
105″ MultiTank Conveyor DishwasherWT105 |
10-29-08 |