Electrolux 534177, 534175, 534176, 534174 User Manual

0 (0)
Electrolux 534177, 534175, 534176, 534174 User Manual

ITEM # _______________________________________________

MODEL # _____________________________________________

 

Warewashing

PROJECT NAME # ______________________________________

82Multi Tank Conveyor Dishwasher

SIS # _________________________________________________

with Energy Saving Device (ESD)

 

 

 

WT82

AIA # _________________________________________________

 

 

 

 

 

 

 

 

 

 

Main features

 

 

 

 

• Energy Saving Device (ESD). The ESD is an internal condenser which utilizes the

 

 

steam generated by the machine in the rinse and wash tanks to heat up

 

 

incoming cold water. The incoming cold water is heated up to 120 °F and a built

 

 

in booster will heat this water up to 180 °F (min) for the final sanitizing rinse.

 

 

• DUO Rinse. Unit to feature 23″ rinse tank with two rinse arms (top and bottom).

 

 

• Large 40 gallon wash tank with two wash pumps. 3 HP wash pump for top

 

 

wash arms and 1.5 HP wash pump for lower wash arms. Wash arms specifically

 

 

designed for maximum soil removal.

 

 

• Built in atmospheric booster system with air break.

 

 

• Built in rinse booster pump guarantees constant rinse pressure.

 

 

• Speed of conveyor can be set through the control panel by the operator.

 

 

150 racks/hr or 250 racks/hr.

 

 

• Large counter balanced inspection doors in wash and rinse sections allow

 

 

unrestricted all round access to the wash and rinse area. Door is insulated with

Warewashing

 

injected foam. This adds strength as well as reduces noise and heat loss.

 

• Large filters sloping towards the front to the smaller pressed filter box for quick

82" Multi Tank Conveyor Dishwasher

removal. Filters feature holes smaller than the concave ant-block wash nozzles so

with Energy Saving Device (ESD) WT82

large food cannot enter and block the wash system. Filters easy to remove from

534174 (WT82AL208)

82″ Conveyor Dishwasher with Energy

pre wash as well as wash sections.

• Adjustable feet for full access underneath the machine for cleaning.

 

Saving device. Left to Right - 208 V

534175 (WT82AR208)

82″ Conveyor Dishwasher with Energy

• Push button self cleaning cycle of all tanks for ease of “end of day” cleaning.

• Rinse chamber without internal pipes and therefore no hidden dirt traps.

 

Saving Device. Right to Left - 208 V

534176 (WT82AL240)

82″ Conveyor Dishwasher with Energy

• Wash chamber without internal pipes and therefore no hidden dirt traps.

 

Saving device. Left to Right - 240 V

• Self draining wash pumps provide maximum hygiene with no smells and all

534177 (WT82AR240)

82″ Conveyor Dishwasher with Energy

wash and rinse zones drain automatically at the push of a button.

 

Saving device. Right to Left - 240 V

• Heavy duty stainless steel wash pump (impeller and housing).

 

 

• Deep drawn pressed 40 gal wash tank with fully rounded corners, sloped towards

Short Form Specification

the drain to prevent dirt build up provides fast drainage in only a few minutes.

Pressed wash tank with no welded points offer a guaranteed water tight solution.

 

 

 

 

• Dishwasher structure is held together with a solid 2″ × 2″ stainless steel tube

 

 

Item No. ___________________________________

sub-frame to provide long term sturdiness.

Unit to be Electrolux WT82 Hot Water Sanitizing 82″ multi tank

• All main components made in heavy duty anti-corrosive 304 type stainless steel:

tanks, panels, wash & rinse arms and caps, doors, front, handle, rear and side-

conveyor dishwasher with Energy Saving Device and built in hot water

panels and rack transportation system.

booster. Electrical characteristics to be ____ 208 V or ____ 240 V three

• Wash and rinse arms can be easily removed for cleaning.

phase operation. Unit to operate from ___ left to right or ____ right to left.

Unit to feature built in Energy Saving Device (ESD). ESD permits the unit

• IPX5 (NEMA4) water protection ensures no damage from cleaning.

to operate with COLD WATER. Wash zone with two individual wash

• Autostart/stop ensures that the machine runs only when a rack is passing

pumps. 3 HP wash pump for top wash arms and 1.5 HP wash pump for

through it. This reduces both water and energy consumption.

lower wash arms. Unit to feature 23″ DUO rinse area with atmospheric

• Internal curtains made of silastic material and are not affected by detergent or heat.

built in booster system and built in rinse booster pump thus guaranteeing

rinse pressure during rinse cycle. Unit to feature two conveyor speeds

• Electronic control panel features large display for reading of wash and rinse

which can be selected from the control panel by the operator, 150 racks/

temperatures.

hour or 250 racks/hour. Maximum water consumption at 250 racks/hour

• Low water consumption. At 250 racks per hour, the machine uses only 87 gal/hr

of only 87 gal/hour (0.3 gal/rack) of COLD WATER. Unit to feature large

(0.3 gal/rack).

heat and noise insulated front counter balanced door in wash and rinse

• Machine predisposed for external detergent and rinse aid connections.

tanks for easy access of internal components. Unit to feature as

standard end of day self cleaning cycle. Drain of water from the machine

 

 

can be done through the control panel. Large deep drawn 40 gal wash

Included Accessories

tank for extended wash sessions.

• Vent cowls (left and right side).

Covered by Electrolux Platinum Star® Service Program two-year parts

• One open sided dishwasher rack for trays.

and one-year labor warranty, installation start-up and performance check-

up after one year from installation.

• Rack for cups.

 

 

• Rack for dinner plates.

 

 

Optional Accessories

 

 

• Ventilation activation kit.

3048424

Approval: ___________________________________________

Electrolux Professional, Inc. www.electroluxusa.com/professional

3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789

WT82 (ESD) Device Saving Energy with Dishwasher Conveyor Tank Multi 82"

Warewashing

 

 

Electric

Supply voltage:

534174 (WT82AL208)

208 V/3ph/60Hz

 

534175 (WT82AR208)

208 V/3ph/60Hz

 

534176 (WT82AL240)

240 V/3ph/60Hz

 

534177 (WT82AR240)

240 V/3ph/60Hz

Dishwasher requires two separate electrical service connections. Connection 1 for RINSE MODULE; Connection 2 for WASH MODULE. Refer to below table for Amp requirements.

Connection 1:

208 V/3ph/60Hz

71A

 

240 V/3ph/60Hz

62A

Connection 2:

208 V/3ph/60Hz

69A

 

240V/3ph/60Hz

62A

Total Amp Load:

208 V/3ph/60Hz

133.8A (44.1kW)

 

240 V/3ph/60Hz

118.9A (44.1kW)

Exhaust Requirements

Unit supplied as standard with extended vent hoods (can be removed during installation if not required).

Exhaust extraction not more than 100 CFM

Refer to installation diagram for minimum exhaust hood installation height .

Key Information

Productivity racks per hour

250 racks / 4500 dishes

(max speed):

(average 18 dishes per rack)

Productivity racks per hour

150 racks / 2700 dishes

(min speed):

(average 18 dishes per rack)

Table to Table connection:

82-5/8″ (2098 mm)

Number of Tanks:

2

Height with door open:

83-7/16″ (2119 mm)

Charging hole size (width):

20-7/8″ (530 mm)

Charging hole size (height):

19-3/4″ (501 mm)

Shipping weight:

1268 lb (575 kg)

Shipping width:

93-5/16″ (2370 mm)

Shipping depth:

40-15/16″ (1040 mm)

Shipping height:

81-1/8″ (2060 mm)

Shipping volume:

157 cu.ft (4.46 m³)

Noise level:

<70 dBA

Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.

Warewashing

82Multi Tank Conveyor Dishwasher with Energy Saving Device (ESD) WT82

Water

Inlet Water supply pressure:

22 – 102 psi (150 – 700 kPa)

Inlet Cold Water Supply Temperature

39 – 59 °F (4 - 15 °C)

for rinse section:

 

Inlet Hot Water Supply Temperature

140 °F (60 °C)

for wash section:

 

Inlet Water supply hardness:

4-8 gpg (7-14 °fH) max

Incoming Hot Water line size

G 3/4″

(wash section):

 

Incoming Cold Water line size (rinse):

G 3/4″

Drain line size (wash section):

G 1-1/2″

Drain line size (rinse section):

G 1-1/2″

Hot Water consumption: Gallons/hr:

4 gal/hr (15 liters)

Cold Water consumption: Gallons/hr:

83 gal/hr (315 liters)

Water consumption/rack:

0.3 gal/rack (0.75 l/rack)

Wash Temperature:

160 – 172 °F (71-78 °C)

Wash tank size:

40 gal (150 liters)

Wash pump power (top wash arms):

3 hp (2.2 kW)

Wash pump power (lower wash arms):

1.5 hp (1.2 kW)

Power Rinse Temperature:

160 – 172 °F (71-78 °C)

Power rinse tank size:

6 gal (23 liters)

Rinse pump power:

0.4 hp (0.32 kW)

Final Rinse Temperature:

180 – 194 °F (82-90 °C)

Final Rinse water flow:

79 gal/hr (300 l/hr)

Hot water booster capacity:

3.17 gal (12 liters)

Initial fill Hot Water requirements:

40 gal (150 liters)

Warewashing

 

82″ Multi Tank Conveyor Dishwasher with Energy Saving Device (ESD) WT82

10-29-08

Loading...
+ 3 hidden pages