504216 (WT65H208WS)
Approval: ___________________________________________
Item No. ___________________________________
Unit shall be Electrolux WT65 upright hood type hot water sanitizing
dishmachine with built in continuous water softener. Electrical character-
istics to be ___208 or ___240 volts three phase operation with four auto-
matic cycles of 60/70/120 seconds and infinte cycle using 1 gallon of
softened 180 °F final rinse water per rack. Rinse temperature and pres-
sure guaranteed by built in 40 °F rise hot water booster heater and built in
rinse booster pump. Washing performance is guaranteed by a powerful 2
HP wash pump, upper and lower stainless steel revolving washing spray
arms. 304 Stainless steel construction to include hood, frame, wash tank,
insulated booster tank and side panels. Unit shall be field convertible from
straight to corner operation. The unit shall include drain pump, detergent
and rinse aid dispenser pumps and built in rinse aid container. Double
skinned and insulated hood construction for energy saving and quite op-
eration. Confortable front loading of water softener regeneration salt.
Covered by Electrolux Platinum Star™ Service Program two-year parts
and one-year labor warranty, installation start-up and performance check-
up after one year from installation.
Short Form Specification
Electrolux Professional, Inc.
www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
ITEM # _______________________________________________
MODEL # _____________________________________________
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
• Built-in booster heater sized to raise incoming 120 °F water to
180 °F minimum for sanitizing rinse. No external booster is required.
• Constant temperature above 180 °F thoughout the rinsing cycle thereby
ensuring that NSF mandated temperatures are maintained.
• Unique temperature interlock guarantees required sanitizing temperatures
in both the wash and final rinse.
• Requires only 1 gallon of water per rack.
• Maximum capacity of 60 racks per hour.
• 60/70/120 seconds and infinite totally automatic cycle.
• Two built in resin containers automatically alternate during regeneration to
provide non stop washing.
• Regeneration of resins activated automatically with no operator intervention.
• 100% of final rinse water is softened with no pressure drop to ensure full
detergent removal and sanitization of washed items.
• Comfortable front loading of regeneration salts.
• Automatic fill of wash tank to be recirculated during each wash cycle.
• Automatic start on hood closure.
• Automatic cycle.
• Rinse cycle refreshes wash water and tank heat.
• Cycle may be interrupted at any time by door opening.
• Heavy duty Stainless steel construction.
• Internal cavity as well as exterior panels are all 304 series Stainless steel.
• Utilizes fresh softened hot water sanitizing rinse.
• Double skinned hood construction with sound insulation for quiet operation.
• Special designed Stainless steel nozzles provide superior cleaning action.
• Revolving Stainless steel wash/rinse arms above and below the rack.
• Interchangeable wash/rinse arms screw out for simple clean up.
• Primary and secondary strainers for enhanced soil filtering.
• Height adjustable feet.
• State-of-the-art electronic controls with built-in programming, self-
diagnostics for serviceability and automatic interior rinse-down cycle.
• Digital read-out keeps operator informed as to cycle status as well as
temperatures.
• Element protection from dry fire and low water.
• Detergent / rinse additive signal connection box.
• Utilizes standard 20″ by 20″ racks for ease of operation
(one pegged and one flat rack included).
• Separate drain pump controls water level in the wash tank as well as
machine draining.
• 16-1/16″ door opening accepts 18″ trays.
• Field convertible from straight to corner operation.
• Equipped with 6-foot flexible fill and drain hoses.
• 2 HP three phase type motor.
• 208 V/3p/60Hz or 240 V/3p/60Hz electrical specification.
Warewashing
Hood Type Dishwasher with Continuous Water Softener WT65
Hood Type Dishwasher with
Continuous Water Softener WT65
Warewashing
Hood Type Dishwasher with
Continuous Water Softener WT65
504216 (WT65H208WS) Hood Type Dishwasher with
continuous water softener- 208 V
504217 (WT65H240WS) Hood Type Dishwasher with
continuous water softener - 240 V
Loading...