Delfield SHC-50-NU, SHC-60-NU, SHC-74-NU, SH3C-74-NU, SHC-96-NU General Manual

Shelleysteel TM	Project __________________________________
	Item ____________________________________
by Delfield	Quantity ________________________________
SHC-NU	CSI Section 11400
	Approved _______________________________
	Date ____________________________________

Mobile Hot and Cold Combination Counters

Models

• SHC-50-NU One hot well, 26” x 21.62” cold pan		•	SH3C-74	-NU Three hot wells, 26” x 21.62” cold pan
• SHC-60-NU One hot well, 26” x 21.62” cold pan		• SHC-96-NU One hot well, 65” x 21.62” cold pan
• SH2C-62-NU Two hot wells, 26” x 21.62” cold pan		• SH2C-96-NU Two hot wells, 52” x 21.62” cold pan
•	SHC-74-NU One hot well, 52” x 21.62” cold pan	•	SH3C-96	-NU Three hot wells, 39” x 21.62” cold pan
•	SH2C-74-NU Two hot wells, 26” x 21.62” cold pan	•	SH4C-96	-NU Four hot wells, 26” x 21.62” cold pan

Model SH2C-60-NU

shown with option fold-down tray slide, fold-down work shelf and flip-up sneezeguard

Standard Features

•14-gauge stainless steel top

•18-gauge stainless steel exterior body

•14-gauge galvanized bottom

•Top has one to four electrically heated, recessed die-stamped stainless steel hot food warmers. Each warmer accommodates a 12” x 20” x 6” pan (pans supplied by others)

•Insulated ice pan is 7” deep and constructed of 22-gauge stainless steel. Perforated false bottom, and drain with valve is standard

•A maximum 10’ long cord and plug

•Electrical connections are 60 hertz, single phase

•All exterior panels reinforced with overlapping corners, welded in place

•All body cutouts reinforced with 14-gauge channel supports

•All units are standard on 5” diameter polyurethane swivel casters for easy cleaning

•Easy to use stainless steel interlock system is standard on base and tray slides

•Counter heights available from 28” to 36” in 2” increments

•One year parts and 90 day labor standard warranty

Options &

Accessories

•Tray slides and work shelves

•Line-up interlock device

•Food shields

•Decal packages

•Incandescent light fixtures*

•Radiant or bullet style heat lamps*

•Open understorage with shelf

•120V/60Hz/1ø, 10 amp convenience outlet with breaker*

•Drains from food wells, plumbed to common valve

•Stainless steel trim strips

•6”(15.2cm) high adjustable stainless steel legs in lieu of casters

•Laminate exterior panels in lieu of stainless steel exterior panels

*Inclusion of these options will alter the electrical specifications of unit

Specifications

Exterior Body is consructed of 18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place. All body cutouts are reinforced with 14-gauge channel supports.

Exterior top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates one 12.75” x 20.75” x 6” (32.4cm x 52.7cm x 15.2cm) pan.

Heated food warmers are constructed of die-stamped stainless steel. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a 3-wire, grounded minimum 10’ (3m) long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service. Unit has an on/off switch mounted on the exterior.

Insulated ice pan is 7” (17.8cm) deep and constructed of 22gauge stainless steel. A removable, peforated false bottom 1” (2.54cm) high, constructed of stainless steel is supplied. The ice pan is seperated from the exterior top by a concealed breaker strip and fully insulated with foamed-in-place polyurethane insulation. Ice pan is equipped with a drain valve located at the bottom of the unit.

Casters: Unit is mounted on 5” (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00” (15.2cm).

Note: When lights with heat lamps are used over hot wells, incandescent light fixtures will be used due to heat.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981
	Mt. Pleasant, Michigan 48858		www.delfield.com
		Fax: [phone]

<![if ! IE]>

<![endif]>Counters Combination Cold and Hot Mobile NU:-SHC