|
Project ___________________________________ |
|
Item _____________________________________ |
ST4448N Flat Top |
Quantity _ ________________________________ |
CSI Section 11400 |
|
Approved _ _______________________________ |
|
Front-Breathing Self-Contained Flat Top Refrigerated |
Date _____________________________________ |
Bases |
|
|
|
Models |
|
•ST4448N Two section refrigerator, flat top with doors
• STD4448N Two section refrigerator, flat top with drawers
|
Standard Features |
• |
60-cycle single phase electrical |
|
|
|
|
|
installation |
|
• All 4400 and 4500 Series units are 100% front |
|
system |
|
|
|
breathing, which allows the unit to be pushed |
• |
6’ cord and plug supplied |
|
|
against a wall or built into a cabinet or an |
• |
One epoxy coated wire shelf standard, |
|
|
existing line up |
|
installed per door section |
|
• Durable, rugged stainless steel sides, top and |
• |
Electromechanical control |
|
|
|
front |
• |
One year parts and 90 day labor |
|
• Features Delfield’s exclusive ABS interior (on |
|
standard warranty |
|
|
|
sides). ABS is extremely durable - it won’t dent, |
Options & |
|
|
|
chip or corrode and is backed by a limited |
Accessories |
|
|
|
lifetime warranty |
||
|
|
|
|
|
|
• Heavy duty self-closing hinges |
|
|
|
|
• “ST” prefix models have a 4” stainless steel |
• |
18” wide single tier overshelf |
|
|
|
backsplash |
• |
Stainless steel finish on back |
ST4448N |
• “D” prefix models feature Delfield’s exclusive |
• |
Plastic laminate on front |
|
|
new drawer system. Drawers are backed by a |
• |
Additional wire shelves |
|
|
|
10-year warranty on the track assembly |
• |
3” casters, 3.75” ride height |
|
• Environmentally friendly R404A refrigerant |
• |
Door lock (solid door models only) |
|
|
• High density foamed in place environmentally |
• |
Exterior thermometer (solid door |
|
|
|
friendly, Kyoto Protocol Compliant, Non ODP |
|
models only) |
|
|
(Ozone Depletion Potential), Non GWP (Global |
• |
Interior lights |
|
|
Warming Potential) polyurethane keeps energy |
• |
Glass door(s) |
|
|
costs low |
• |
220V/50 Hertz electrical system* |
|
• Black recessed quick grip handle |
* |
Inclusion of this option will alter |
|
|
• |
Standard on 5” casters for easy cleaning and |
|
electrical specifications of the unit |
Specifications
Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. The backsplash is full width and 4” (10cm) tall.
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is onepiece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
Electromechanical control is mounted on the right side of the evaporator housing inside the cabinet. It allows the unit to maintain consistent temperatures in heavy duty conditions.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm).
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf.
Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm) and three 1/9 size 4"-6" (10.2cm-15.2cm) deep pans. Bottom drawer holds one 12" x 20" and three 1/9 size 4" deep pans. Pans are supplied by others.
Only
Model ST4448N
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
www.delfield.com |
|
Mt. Pleasant, Michigan 48858 |
|||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
Bases Refrigerated Top Flat Contained-Self Breathing-Front Top: Flat ST4448N