MP 700 MP 730
SERVICE MANUAL
Canon
REVISION 0
MultiPASS MP730 |
H12-2692 |
120V |
USA |
|
|
||||
MultiPASS MP730 |
H12-2696 |
120V |
CND/LTN |
|
MultiPASS MP700 |
H12-2702 |
120V |
USA |
|
MultiPASS MP700 |
H12-2706 |
120V |
CND |
|
|
|
|
|
|
APR. 2003 |
HY8-19B3-000 |
COPYRIGHT © 2003 CANON INC. |
CANON MultiPASS MP730/MP700 APR. 2003 |
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applicable products or in the content of this manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual, Canon will issue a new editions of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with local law.
Trademarks
The product names and company names described in this manual are the registered trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.
Copyright © 2003 by Canon Inc.
CANON INC.
Ink Jet Products Technical Documentation Dept. 2
5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-8501, Japan
DTP System
The data contained on this manual were created using Windows 2000® computers.
Document creation and page layout were performed using Adobe® PageMaker® 6.5.
Logos and illustrations were created using Adobe® Illustrator® 9.0.
I. MEANING OF MARKS
The marks used in this manual have the following meanings.
Mark Meaning
States a precaution to be taken to prevent danger to personnel, damage to the product, or damage to electronic components by discharge of static electricity. for example.
States a precaution to be taken to prevent damage to electronic components by electrostatic discharge.
If the following mark is used, following the directions given.
Informs you of fire-related cautions.
Informs you that the plug must be removed from the power outlet before starting an operation.
Gives useful information to understand descriptions.
NOTE
Indicates sections to be read to obtain more detailed information.
REFERENCE
I
II. ABOUT THIS MANUAL
This manual is divided into five parts, and contains information required for servicing the product.
Chapter 1: General Description
This part explains product specifications and the how to service the unit safely. It is very important, so please read it.
Chapter 2: Technical Reference
This part explains the technical theory the product.
Chapter 3: Assembly and Disassembly
This part explains the assembly and disassembly of the product.
Chapter 4: Maintenance and Service
This part explains how to maintain the products for adjustment and troubleshooting and service operations and service switches.
Chapter 5: Appendix
This part explains the informations of the optional products and user data flow.
•For more details of user operations and user reports, see the separate volume of USER'S GUIDE.
•Detailed description of each SSSW/parameter is not given in this manual
REFERENCE
except the new SSSWs/parameters added to this model.See G3 Facsimile Service Data Handbook (supplied separately) for details them.
•See the G3/G4 Facsimile Error Code List (Rev.2, supplied separately) for details of the error codes not shown in this manual.
II
III. REVISION HISTORY
REVISION CONTENT
0 |
Original |
III
IV. TABLE OF CONTENTS
Page |
Chapter 1: General Description |
|
1-1 |
1. FEATURES |
|
1-1 |
1.1 |
Overview |
1-2 |
2. SPECIFICATIONS |
|
1-2 |
2.1 |
General Specification |
1-2 |
2.2 |
Communication Specification (MP730 only) |
1-4 |
2.3 |
Color Communication Specification (MP730 only) |
1-5 |
2.4 |
Scanning Specification |
1-7 |
2.5 |
Printer Specification |
1-11 |
2.6 |
Copy Specification |
1-12 |
2.7 |
Photo Print Specification |
1-13 |
2.8 |
Function |
1-15 |
3. OVERVIEW |
|
1-15 |
3.1 |
External View |
1-16 |
3.2 |
Operation Panel |
1-17 |
3.3 |
Consumables |
1-17 |
|
3.3.1 Ink tanks |
1-18 |
|
3.3.2 Print Media |
|
Chapter 2: Technical Reference |
2-1 |
1. COMPONENT LAYOUT |
2-4 |
2. SCANNING SECTION |
2-6 |
3. PRINTER SECTION |
2-6 |
3.1 Printer Mechanical Section |
2-6 |
3.1.1 Carriage section |
2-7 |
3.1.2 Purge section |
2-7 |
3.1.3 Paper feed section |
2-8 |
3.2 About the Ink Sensor |
2-9 |
3.3 Cleaning Mode and Suction Amount |
2-10 |
4. NEW FUNCTION |
|
Chapter 3: Assembly and Disassembly |
|
3-1 |
1.ATTENTION TO BE PAID DURING ASSEMBLY/DISASSEMBLY |
|
3-1 |
1.1 |
Safety Cautions |
3-2 |
1.2 |
General Cautions |
3-3 |
1.3 |
Product-Inherent Cautions |
3-3 |
|
1.3.1 Prevention of ink-soiling |
3-3 |
|
1.3.2 Conductivity of the ink |
3-4 |
|
1.3.3 Caution when replacing the SPCNT board |
3-5 |
|
1.3.4 Caution when replacing the ROM |
3-6 |
|
1.3.5 Removal of red screws prohibited |
3-6 |
|
1.3.6 Caution when release the carriage lock |
IV
3-7 |
|
1.3.7 Caution when handling the carriage encoder film |
3-7 |
|
1.3.8 Caution when replacing the waste ink absorber |
3-8 |
1.4 All Clear (Action in the Event of Abnormality) |
|
3-8 |
1.5 |
Shipping the Main Unit |
3-9 |
2. DISASSEMBLY/ASSEMBLY |
|
3-9 |
2.1 |
Disassembly Procedure |
3-9 |
|
2.1.1 SPCNT board (Replacing the ROM), NCU board |
3-12 |
|
2.1.2 Operation panel unit |
3-13 |
|
2.1.3 Contact sensor |
3-17 |
|
2.1.4 Print and ASF ass’y |
3-22 |
|
2.1.5 Power supply unit |
3-23 |
|
2.1.6 Separation unit, Separation guide (MP730 only) |
|
Chapter 4: Maintenance and Service |
|
4-1 |
1. MAINTENANCE LIST |
|
4-1 |
1.1 Consumables |
|
4-1 |
1.2 |
Cleaning |
4-2 |
1.3 |
Periodic Inspection |
4-2 |
1.4 |
Periodic Replacement Parts |
4-2 |
1.5 Adjustment Items |
|
4-3 |
1.6 |
General Tools |
4-3 |
1.7 |
Special Tools |
4-4 |
2. HOW TO CLEAN PARTS |
|
4-4 |
2.1 |
Main Unit Outer Covers |
4-4 |
2.2 |
Pickup/Separation Roller (MP730 only) |
4-4 |
2.3 |
Document U-Turn/Feed/Eject Roller (MP730 only) |
4-4 |
2.4 |
Separation Guide (MP730 only) |
4-4 |
2.5 |
Document Guide Sheet (MP730 only) |
4-4 |
2.6 |
Document Glass |
4-4 |
2.7 |
White Sheet Area |
4-4 |
2.8 |
Printer Platen |
4-6 |
3. ADJUSTMENT |
|
4-6 |
3.1 |
CS LED Lights-on Duration Adjustment |
4-7 |
3.2 |
When Adjustment of the Print Head Position is Required |
4-10 |
4. TROUBLESHOOTING |
|
4-10 |
4.1 Troubleshooting Index |
|
4-12 |
4.2 |
Error Shown on the Display |
4-12 |
|
4.2.1 User error message |
4-17 |
|
4.2.2 Error codes |
4-26 |
4.3 |
Errors not Shown on the Display |
4-26 |
|
4.3.1 General errors |
4-27 |
|
4.3.2 Printing problems |
4-29 |
|
4.3.3 Scanning problems |
4-30 |
|
4.3.4 Memory card problem |
4-31 |
|
4.3.5 Test mode function problems |
V
4-32 |
4.4 |
Processing Communication Problems |
4-32 |
|
4.4.1 Initial identification of problems |
4-33 |
|
4.4.2 Procedures for processing communication problems |
4-36 |
5. SERVICE SWITCHES |
|
4-36 |
5.1 |
Hardware Switches |
4-36 |
5.2 |
Service Data Setting |
4-38 |
5.3 |
Service Data Registration/Setting Method |
4-39 |
5.4 |
Service Data Flowchart |
4-46 |
5.5 |
Explanation of Service Data |
4-47 |
6. TEST FUNCTIONS |
|
4-47 |
6.1 |
User Test Print Functions |
4-47 |
|
6.1.1 Nozzle check pattern |
4-48 |
6.2 |
Service Test Functions |
4-48 |
|
6.2.1 Test mode overview |
4-49 |
|
6.2.2 Test mode flowchart |
4-50 |
|
6.2.3 D-RAM tests |
4-50 |
|
6.2.4 CS tests |
4-51 |
|
6.2.5 PRINT test |
4-52 |
|
6.2.6 Modem and NCU tests |
4-55 |
|
6.2.7 Faculty tests |
4-58 |
|
6.2.8 PRINTER tests |
4-59 |
7. SERVICE REPORT |
|
4-59 |
7.1 |
Report Output Function |
4-59 |
|
7.1.1 User report output functions |
4-61 |
|
7.1.2 Service report output functions |
4-74 |
8. WIRING DIAGRAM |
|
4-74 |
8.1 |
Wiring Diagram |
|
Chapter 5: Technical Reference |
|
5-1 |
1. INSTALLATION |
|
5-1 |
1.1 |
Setting Up |
5-1 |
1.2 |
Checking Operation |
5-2 |
2. USER DATA FLOW |
|
5-2 |
2.1 |
Menu Flow in Each Mode |
5-3 |
2.2 |
Name Flow in Each Mode |
5-3 |
|
2.2.1 Special copy name flow |
5-3 |
|
2.2.2 Maintenance name flow |
5-4 |
|
2.2.3 User data name flow |
5-8 |
|
2.2.4 Receive mode name flow |
5-8 |
|
2.2.5 Memory reference name flow |
5-8 |
|
2.2.6 Reports/Lists name flow |
5-9 |
|
2.2.7 Photo print mode name flow |
5-10 |
|
2.2.8 VIVID photo print mode name flow |
5-10 |
|
2.2.9 Print photo date name flow |
VI
Chapter 1
General
Description
MultiPASS MP730/MP700 Chapter 1: General Description
This product is a G3 facsimile based on the ITU-T recommendations. It can be used in telephone networks.
Picture Quality Color Printer
High quality printing can be accomplished with the Canon Bubble Jet (BJ) method using the maximum 4800 dpi x 1200 dpi resolution.
Various media can be printed at high speed which is maximum 22 pages/minute in black and white or 14 pages/minute in color.
Plain paper fax which can transmit/receive in color (MP730 only)
Conforming to ITU-T recommendations, this fax is able to transmit/receive in color. Due to containing extremely high-speed 33.6 kbps modems, transmission time can be shortened. Pictures and photographs can both be send and received clearly by UHQ (Ultra High quality), Canon’s vivid image processing technology. Up to 30 letter, legal and A4 size sheets, can be set in the ADF. 10 one-touch dial entries and 100 speed dial entries can be registered, and group dial and broadcasting transmission can also be done. When paper and ink run out, the data is saved to memory, so there is no worry.
Out-of-Ink Function
This machine has a function which detects when ink has run out. The presence/absence of ink in the ink chamber is detected by reflecting ink sensor.
Copy Function
This machine can be used as a copier which achieves the recording resolution of 600 dpi x 600 dpi for black and white copying or 1200 dpi x 1200 dpi for color copying.
Full Color & 256 Gradation Grayscale Scanner
Using MP Toolbox or MP Drivers (ScanGear and WIA driver), full color and 256-gradation grayscale images with a quality of 25-9600 dpi can be read into a computer.
PC Fax (MP730 only)
By connecting this machine to a computer, a fax can be transmitted from the included MultiPASS Suite or from a Windows application. (Cannot be receive)
1-1
MultiPASS MP730/MP700 Chapter 1: General Description
Type
Desktop
Power source
AC 120-127 V, 60 Hz
Power consumption
Standby |
Approx. 10.6 W (MP730) |
|
Approx. 8.6 W (MP700) |
Max. |
Approx. 50.8 W(MP730) |
|
Approx. 42.1 W(MP700) |
Environmental conditions |
|
Temperature |
59-81.5 ° F (15-27.5 ° C) |
Humidity |
20-80 %RH |
Operating noise
Measured in accordance with ISO standards
Standby |
35 dB(A) or less |
Operating |
55 dB(A) or less |
Dimensions (W x D x H)
17.28” x 19.53” x 12.83” (439 mm x 496 mm x 326 mm) (MP730) 17.28” x 19.53” x 10” (439 mm x 496 mm x 253 mm) (MP700) Not including trays
Weight
Approx. 28.2 lb. (12.8 kg) (MP730)
Approx. 24 lb. (10.9 kg) (MP700)
Applicable lines
PSTN (Public Switched Telephone Network)
Applicable Services
DRPD (Distinctive Ring Pattern Detection)
Handset
None
Transmission method
Half-duplex
1-2
MultiPASS MP730/MP700 Chapter 1: General Description
Transmission control protocol
ITU-T T.30 binary protocol
ITU-T V.8 protocol, V.34 protocol
Modulation method |
|
|
|
|
G3 image signals |
|
ITU-T V.27ter (4.8k, 2.4k bps) |
|
|
|
|
ITU-T V.29 (9.6k, 7.2k bps) |
|
|
|
|
ITU-T V.17 (14.4k, 12.0k, TC9.6k, TC7.2k bps) |
||
|
|
ITU-T V.34 (33.6k, 31.2k, 28.8k, 26.4k, 24.0k, 21.6k, 19.2k, |
||
|
|
16.8k, 14.4k, 12.0k, 9.6k, 7.2k, 4.8k, 2.4k bps) |
||
G3 procedure signals |
ITU-T V.21 (No. 2) (300 bps) |
|
||
|
|
ITU-T V.8 300 bps |
|
|
|
|
ITU-T V.34 1200 bps, 600 bps |
|
|
Coding method |
|
|
|
|
Black/white |
MH, MR, MMR, JBIG |
|
|
|
Color |
JPEG |
|
|
|
Error correction |
|
|
|
|
ITU-T ECM |
|
|
|
|
Time required for transmission protocol |
|
|||
Mode |
Pre-message*1 |
Post-message*2 |
Post-message*3 |
|
|
protocol |
protocol |
protocol |
|
|
|
|
(between pages) |
(after pages) |
|
|
|
|
|
V.8/V.34 |
approx.6 sec. |
approx.1 sec. |
approx.1 sec. |
|
T.30 |
approx.12 sec. |
approx.4 sec. |
approx.3.5 sec. |
*1 Time from when other facsimile is connected to the line until image transmission begins. *2 Post-message (between pages): Time from after one document has been sent until transmission of the next document starts if several pages are transmitted.
*3 Post-message (after last pages): Time from after image transmission is completed until line is switched from facsimile to telephone.
Minimum transmission time
10 msec.(G3), 0 msec.(G3, ECM)
Transmission output level
From -8 to -15 dBm
Receive input level
From -3 to -43 dBm
Modem IC
CONEXANT FM336Plus
1-3
MultiPASS MP730/MP700 Chapter 1: General Description
ITU-T recommendation
ITU-T T.4 ANNEX E (JPEG Header) ITU-T T.30 ANNEX E (JPEG Color Fax) ITU-T T.42 (Color space for Color Fax) ITU-T T.81 (JPEG)
Scanning document size
A4
Printing paper size
A4
Resolution
200 dpi x 200 dpi
Picture element
8 bit
Coding
JPEG
Color space
CIE LAB
Illuminant data
CIE standard illuminant D50
Sub sample
4:1:1 (=Lab)
Color number
24 bit
Resolution
Standard, Fine
1-4
MultiPASS MP730/MP700 Chapter 1: General Description
Type
Book
Sheet (MP730 only)
ADF capacity (MP730 only)
Max.35 sheets (Letter, A4)
Max.30 sheets (Legal)
Effective scanning width
Letter/Legal |
8.42” (214 mm) |
A4 |
8.19” (208 mm) |
Scanning method
Color contact image sensor scanning method
Scanning speed |
|
Mode |
Scanning speed |
|
|
Text/Gray scale |
5.3 sec./page |
Color |
15.9 sec./page |
Scanner gradations |
|
Gray scale |
8 bit, 256 gradations |
Color |
R,G,B (8 bit each) full color capability |
TWAIN/WIA |
|
Yes |
|
Scanning density adjustment
9 density level
Image mode
Halftone (PHOTO mode)
Halftone (fax and copy)
64-gradations error diffusion system (UHQ)
Prescan
Yes
1-5
MultiPASS MP730/MP700 Chapter 1: General Description
Document dimensions (W x L)
MP730 |
|
ADF Maximum |
8.50” x 39.3” (216 mm x 1000 mm) |
ADF Minimum |
5.83” x 4.13” (148 mm x 105 mm) |
Document glass |
8.50” x 11.7” (216 mm x 297 mm) |
MP700 |
|
Document glass |
8.50” x 14.0” (216 mm x 356 mm) |
Document thickness |
|
ADF |
0.002- 0.005” (0.06- 0.13 mm) |
|
(50 -90 g/m2) |
Document glass |
0.79” (20 mm) |
Scanning range
|
|
|
|
|
Max.0.16" (Max.4.0 mm) |
|||||||
Max.0.16" |
MP700, lagal-size: Max.0.31" (Max.8.0 mm) |
|||||||||||
(Max.4.0 mm) |
Color fax: Max.0.24" (Max.6.0 mm)** |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Max.0.18" (Max.4.5 mm)
Letter/Legal/A4*
Max.0.18" (Max.4.5 mm)
*When using legal-size documents with the MP730, load them into the ADF.
**MP730 only
Figure 1-1 Scanning Range
Document scanning width “A4/Letter” is set in service data #1 SSSW SW06, bit4.
NOTE
1-6
MultiPASS MP730/MP700 Chapter 1: General Description
Print method
Bubble-jet ink on-demand
BJ cartridge |
|
Structure |
Detachable ink tanks for each color and BK/CL(M, C, Y) integrated head |
Printhead |
BK: 320 nozzles, 2-column vertical array |
|
CL: 512 nozzles/color, 4-column vertical array/color(M, C) |
|
256 nozzles, 2-column vertical array (Y) |
Ink colors |
Pigment BK, dyes C, M, Y |
Ink tank |
|
Product name |
BCI-3eBK/BCI-3eC/BCI-3eM/BCI-3eY |
Product code |
F47-3131/F47-3141/F47-3151/F47-3161 |
Weight |
BK: 32 g |
|
CL(C, M, Y): 11 g |
Ink detection
Optical LOW-ink sense
Printing speed |
|
Black |
Approx.22 pages/minute |
Color |
Approx.14 pages/minute |
Printing resolution
4800 dpi x 1200 dpi
Paper output tray stacking
Approx.50 sheet (when using the recommended paper)
Paper tray |
|
Paper supply method |
ASF (Automatic Sheet Feeder) |
Number of paper tray |
1 tray: Letter/Legal/A4 (Universal) |
Paper capacity |
Approx.150 sheets (Max.0.51” (13 mm) thickness) |
Borderless print |
|
Yes |
|
Quiet print mode |
|
Yes |
|
1-7
MultiPASS MP730/MP700 Chapter 1: General Description
Recommended paper
Canon Copier LTR/LGL Premium Ppaer
Weight |
75 g/m2 |
Paper size |
Letter, Legal |
Manufactured by |
BOISE CASCADE |
PLOVER BOND |
|
Weight |
75 g/m2 |
Paper size |
Letter |
Manufactured by |
FOX RIVER |
XEROX 4024 |
|
Weight |
75 g/m2, 90 g/m2 |
Paper size |
Letter, Legal |
Manufactured by |
XEROX |
1-8
MultiPASS MP730/MP700 Chapter 1: General Description
Printing range (Black and white fax)
b |
a |
c |
Paper leading edge |
Printing Drop Out Range |
d |
|
Printing Range
e
Paper trailing edge
Figure 1-2 Printing Range (Black and white fax)
Item |
A4 |
Letter |
Legal |
|
a Effective printing width |
8.00” |
8.00” |
8.00” |
|
|
(203.2 mm) |
(203.2 mm) |
(203.2 mm) |
|
b Left margin |
0.13”±0.06” |
0.25”±0.06” |
0.25”±0.06” |
|
|
(3.4±1.5 mm) |
(6.4±1.5 mm) |
(6.4±1.5 mm) |
|
c Right margin |
0.13”±0.06” |
0.25”±0.06” |
0.25”±0.06” |
|
|
(3.4±1.5 mm) |
(6.3±1.5 mm) |
(6.3±1.5 mm) |
|
d Top margin |
0.12”±0.06” |
0.12”±0.06” |
0.12”±0.06” |
|
|
(3.0±1.5 mm) |
(3.0±1.5 mm) |
(3.0±1.5 mm) |
|
e Bottom margin |
0.20”±0.12” |
0.20”±0.12” |
0.20”±0.12” |
|
|
(5.0±3.0 mm) |
(5.0±3.0 mm) |
(5.0±3.0 mm) |
The printing range is set in user data “PRINTER SETTINGS”, “PAPER
SIZE”.
NOTE
1-9
MultiPASS MP730/MP700 Chapter 1: General Description
Printing range (Color fax and Printer mode)
Plain paper and Special media (Color fax and Printer mode)
WxL = 3.15x4.72 in. (Min.90.0x120.0 mm)
Max.8.5x23 in. (215.9x584.2 mm)
W |
Feed direction |
a |
b |
|
|
c |
|
a = 0.13" |
(3.4 mm)(A4, 4x6") |
|
e |
0.25" (6.4 mm)(Letter, Legal) |
|
|
|
b = 0.13" (3.4 mm)(A4, 4x6") |
|
|
|
0.25" (6.4 mm)(Letter, Legal) |
|
|
|
c = 0.12" (3.0 mm) |
|
|
L |
d = 0.20" (5.0 mm) |
|
|
|
e = 1.30" (33.0 mm) |
|
|
|
f = 1.24" (31.5 mm) |
|
d |
f |
: Recommended printing area |
|
|
|||
|
|
||
|
|
: Printable area |
|
|
|
|
(Contains recommended printing area) |
Envelopes
WxL = COM #10 4.17x9.48 in. (106x241 mm)
DL 4.33x8.66 in. (110x220 mm)
|
W |
Feed direction |
a |
b |
|
|
c |
a = 0.13" (3.4 mm) |
|
|
b = 0.13" (3.4 mm) |
|
|
c = 0.12" (3.0 mm) |
|
|
d = 1.04" (26.5 mm) |
|
|
L |
|
d |
|
Figure 1-3 Printing Range (Color fax and Printer mode) 1
1-10
MultiPASS MP730/MP700 Chapter 1: General Description
Banner paper |
|
d |
|
c |
e |
b |
|
1 |
2 |
3 |
4 |
5 |
6 |
|
|||||
a |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
Feed direction |
|
|
|
Min.2 sheets, Max.6 sheets |
||
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a = 0.13" (3.4 mm) |
c = 0.12" (3.0 mm) |
|
e = 0.20" (5.0 mm) |
|
|
|
|
|
|
|
|
b = 0.13" (3.4 mm) |
d = 1.30" (33.0 mm) |
|
|
|
|
Figure 1-4 Printing Range (Color fax and Printer mode) 2
Color copy
Yes
Multiple copy
99 copies
Copy mode |
|
Black/white |
DRAFT, TEXT, PHOTO |
Color |
FAST, NORMAL, FINE |
Copy resolution |
|
Black/white |
600 dpi x 600 dpi |
Color |
1200 dpi x 1200 dpi |
Copy magnification ratio
25 to 400 %
Fixed ratio
Max.(400%), 4” x 6”->LTR(212%), A4->LTR(95%), LGL->LTR(78%), Min.(25%)
1-11
MultiPASS MP730/MP700 Chapter 1: General Description
Interface
Card slot
Compatible memory cards
Compact flash (type I, type II) Smart media
Memory stick SD memory card multimedia card
Incompatible memory cards
Microdrive memory card Smart media (less than 2MB)
Layout
Plain paper (Letter/A4)
Photo Paper Pro (Letter/A4)
Photo Paper Pro (Card)
With/without borders, index (max.70 frames) With/without borders, index (max.70 frames) With borders, index (max.15 frames)
Features
Date printing
Vivid photo printing DPOF function-compatible
1-12
|
MultiPASS MP730/MP700 Chapter 1: General Description |
|
|
|
|
2.8 Function |
|
|
Dialling |
|
|
Manual dialling |
Numeric button |
|
Auto dialling |
Max.120 digits |
|
|
One-touch: 10, Coded speed: 100, Numeric button: 1 |
|
Group dialling |
Max.109 locations |
|
Redial |
Numeric button redial function (Max.120 digits) |
|
Transmission |
|
|
Broadcast transmission |
|
Max.111 locations (One-touch: 10, Coded speed: 100, |
|
|
Numeric button: 1) |
Delayed Tx |
|
None |
Confidential Tx |
|
None |
Relay broadcasting originating |
None |
|
Relay broadcasting |
|
None |
Polling Tx |
|
None |
Dual access |
|
Yes (Max.30 reservations) |
Reception |
|
|
FAX/TEL switching |
|
Yes |
Method |
|
CNG detection |
Message |
|
None |
Pseudo CI |
|
None |
Pseudo ring |
|
Yes |
Pseudo ring back tone |
|
Yes |
Reduction setting for Rx |
Yes |
|
Automatic reduction |
|
Yes (100-70%) |
Built in answering machine |
None |
|
Answering machine connection |
Yes (Telephone answering priority type) |
|
Remote Rx |
|
Yes (Remote ID method) |
Memory lock Rx |
|
None |
Rx printing in reverse order |
None |
|
Confidential Rx |
|
None |
Polling Rx |
|
Yes |
Memory backup |
|
|
Backup contents |
Dial registration data, User data, Service data, Time, etc. |
|
Backup IC |
256 kbit SRAM |
|
Backup device |
Lithium battery DC 3.0V/220 mAh |
|
Battery life |
Approx.5 years |
Image data backup
None
1-13
MultiPASS MP730/MP700 Chapter 1: General Description
Image memory
Approx 4.0 MB
Activity management a) User report
Activity management report (Every 20 communications) Activity report (Tx/Rx)
One-touch speed dialling list Coded speed dialling list Group dialling list
Memory clear list User’s data list Document memory list Multi activity report
b) Service report
System data list System damp list
Others |
|
Closed network |
None |
Direct mail prevention |
None |
Memory box |
None |
Forward transmission |
None |
Transmitting terminal ID |
Yes |
Time/date |
|
Management data |
Year/month/day/hour/minute (24 hours display) |
Precision |
±90 sec. per month |
Display |
20 digits x 2 row |
Completion stamp |
None |
Program button |
None |
Hook button |
Yes |
Telephone exchange function |
None |
Speaker phone |
None |
Demo print function |
None |
Help function |
None |
1-14
MultiPASS MP730/MP700 Chapter 1: General Description
Figure 1-5 External View
1-15
MultiPASS MP730/MP700 Chapter 1: General Description
Figure 1-6 Operation Panel 1
1-16
MultiPASS MP730/MP700 Chapter 1: General Description
Figure 1-7 Operation Panel 2
3.3.1Ink tanks
There are four ink tanks:
Black ink tank <BCI-3eBK>
Cyan ink tank <BCI-3eC>
Magenta ink tank <BCI-3eM>
Yellow ink tank <BCI-3eY>
1-17
MultiPASS MP730/MP700 Chapter 1: General Description
3.3.2 Print Media
Plain paper
You can use normal photocopy paper, Canon Bubble Jet paper (LC-301), or Canon Super White paper (SW-101).
Envelopes
You can use U.S. Commercial No. 10, and European DL.
•You cannot load envelopes of other sizes than those above.
•Do not use envelopes with double flaps or pressure seals as these do not feed properly.
•Do not use envelopes made with embossed or treated surfaces as print quality will deteriorate.
High Resolution Paper HR-101N
This type of paper provides better color reproduction than plain paper. It is suitable for printing business documents that feature graphics, and for photographs.
Glossy Photo Paper GP-301/GP-301N
This media is thicker than High Resolution Paper and has a glossy printing surface to produce printouts close to photograph quality. This paper is suitable for borderless printing.
Matte Photo Paper MP-101
This is a matte water-resistant paper and provides superior color reproduction. It is suitable for a variety of printing purposes such as paper crafts, calendars and matt photos.
Photo Paper Plus Glossy PP-101
This is a thick paper with a glossy water-resistant coating and provides superior color reproduction. It is ideal for printing high-quality photographs.
Photo Paper Pro PR-101
This is thick paper with a treated surface that enhances gloss and provides superior color reproduction. It is ideal for printing high-quality photographs. Also, by using borderless printing, you can print without any white borders.
Photo Paper Pro PC-101S
This card-size paper for printing photographs is made of the same material as Photo Paper Pro (PR-101). By printing the image beyond the perforations, you can then trim the borders to produce a photograph without any white borders.
Transparencies CF-102
This film is ideal for printing presentation material for use with overhead projectors.
T-Shirt Transfers TR-201
This paper is used to produce iron-on transfers.
1-18
Chapter 2
Technical
Reference
MultiPASS MP730/MP700 Chapter 2: Technical Reference
The parts layout of this machine consists of the scanning assembly.
U-turn roller
Document pickup roller
Document feed motor
Separation roller
Document feed roller
Document eject roller
|
Pickup roller |
|
ASF motor |
Flatbed motor |
Paper feed motor |
|
|
|
Carriage belt |
|
Carriage motor |
Contact sensor drive belt
Paper eject roller
Paper feed roller
Figure 2-1 Mechanical Layout
2-1