Canon GP405, GP605, GP160, Gp-335, Gp-605v Service Bulletin acc-145
...
Service Bulletin
COPIER
Issued by Canon Europa N.V.
Model : Saddle Finisher-C2 |
No.: |
Acc-145 |
|
|
(FF-T01-W-000041-01) |
|
DATE: |
09.04.99 |
|
|
|
Location |
: |
SERVICE MANUAL (FY8-13F6-000) |
|
|
|
Subject |
: |
ADDITIONAL DESCRIPTIONS |
|
|
|
Reason |
: This bulletin provides a new way of removing the saddle unit. |
|
|
|
|
Details |
: New Way of Removing the Saddle Unit |
|
|
|
|
|
|
2. "Removing the Saddle Unit" under B. "Saddle Stitcher Assembly" on p. 4-22 |
|
|
|
|
|
The new way of removal is effective if a newly designed lattice guide (FG5-8170-040/FB3-7338-040) |
|||
|
|
is installed; if an old type of lattice guide is installed, follow the instructions on p. 4-22 of the current |
|||
|
|
Service Manual (FY8-13F6-000). |
|
|
|
|
|
1) Remove the four screws [1], and detach the |
[2] |
|
|
|
|
|
|
|
|
|
|
PCB cover [2]. |
|
|
|
|
|
[1] |
[1] |
||
|
|
|
|||
|
|
|
|
|
|
Figure 1
2)Remove the screw, and detach the bending roller knob [3].
[3]
Figure 2
- 1 / 4 -
3)Remove the four screws [5], and detach the rear lower cover [4].
4)Disconnect the two connectors [6] used to connect to the finisher assembly.
5)Remove the five screws [8], and detach the front inside cover [7].
Acc-145
[4]
[5]
[5]
Figure 3
[6]
Figure 4
[8] |
[7] |
Figure 5
[8]
[7]
Figure 6
- 2 / 4 -
Loading...