Apple PowerBook G4 User Manual

PowerBook G4 17-inch
Getting Started
Includes setup, expansion, and troubleshooting information for your PowerBook G4 computer
K
Apple Computer, Inc.
© 2004 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple.
The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.
Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors.
Apple 1 Infinite Loop Cupertino, CA 95014-2084 408-996-1010 www.apple.com
Apple, the Apple logo, AirPort, Apple Store, AppleTalk, Final Cut Pro, FireWire, iCal, iMovie, iTunes, Mac, Macintosh, the Mac logo, Mac OS, PowerBook, QuickTime, and Sherlock are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Finder, the FireWire logo, iDVD, iPhoto, iPod, Rendezvous, Safari, and SuperDrive are trademarks of Apple Computer, Inc.
AppleCare is a service mark of Apple Computer, Inc., registered in the U.S. and other countries. .Mac is a service mark of Apple Computer, Inc.
®
The Bluetooth
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Apple Computer, Inc. is under license.
®
ENERGY STAR
is a U.S. registered trademark.
PowerPC is a trademark of International Business Machines Corporation, used under license therefrom.
Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products.
The product described in this manual incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
Simultaneously published in the United States and Canada.
1

Contents

Chapter 1 5 Getting Started
6
Basic Features of Your PowerBook
8
Additional Features of Your PowerBook
10
Setting Up
16
How Do I Turn My PowerBook Off?
17
Calibrating Your Battery
18
What’s Next?
Chapter 2 19 The Basics
19
Getting to Know Your New PowerBook
20
Adjusting Your Display
21
Using Your Power Adapter
22
Using the Trackpad
23
Using the Keyboard
24
Using a Mouse
24
Learning About Mac OS X
24
Customizing Your Desktop and Setting Your Preferences
25
Connecting to a Printer
26
Playing a CD and Connecting Headphones
26
Keeping Your Software Up to Date
27
Connecting a Camera or Other FireWire or USB Device
27
Connecting to a Network
28
Using the Internet
28
Transferring Files to Another Computer
29
When an Application Freezes
Chapter 3 31 Using Your Computer
32
Universal Serial Bus (USB)
34
FireWire
36
PC Cards
37
Using Bluetooth Devices
38
AirPort Extreme Wireless Networking and Internet Access
39
Ethernet (10/100/1000Base-T )
3
40
Using Your Modem
40
Connecting Speakers and Audio Devices
41
External Video Support (DVI, VGA, and S-Video)
44
Using Your SuperDrive
47
Battery
50
Security Slot
Chapter 4 53 Adding Memory to Your Computer
53
Installing Additional Memory
58
Making Sure Your Computer Recognizes the New Memory
Chapter 5 59 Troubleshooting
60
Problems That Prevent You From Using Your Computer
61
Other Problems
63
Restoring Your Computer’s Software
63
Locating Your Product Serial Number
Appendix A 65 Specifications
Appendix B 67 Safety, Use, and Care Information
67
Safety Instructions for Setting Up and Using Your Computer
68
Using Your PowerBook
69
General Safety Instructions
70
Battery
70
Avoid Hearing Damage
70
Apple and the Environment
71
Ergonomics
Appendix C 73 Connecting to the Internet
75
Gathering the Information You Need
76
Entering Your Information
77
Dial-Up Modem With Point-to-Point Protocol (PPP) Connections
79
DSL, Cable Modem, or LAN Internet Connections
85
AirPort Extreme Wireless Connection
88
Troubleshooting Your Connection
Appendix D 91 Top Ten Questions
95
Communications Regulation Information
Index 101
4
Contents
1

Getting Started

Your PowerBook is a full-featured notebook computer.
1
Apple VGA adapter
Æ
Apple Video
adapter
S-video-to-composite adapter
AC plug
Phone cord
Important:
carefully before you plug your computer into a wall socket.
Read all the installation instructions and safety information (see page 67)
®
DVI-to-VGA adapter
AC cordPower adapter
5

Basic Features of Your PowerBook

AirPort Extreme/ Bluetooth antenna window
Microphone
Built-in speaker (located under speaker grille)
Function key (Fn)
Sleep indicator light
esc
® Power button
®
num lock
TrackpadDisplay
Video Mode Toggle key
Slot-loading optical drive
Media Eject key
release button
Trackpad button
Mute
control
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
AirPort Extreme/ Bluetooth antenna window
Built-in speaker
Brightness
¤
controls
6 Chapter 1
-
Volume controls
Getting Started
Num Lock key
Keyboard illumination controls
Standard function keys
Brightness controls
¤
Increase or decrease the brightness of your PowerBook display.
Volume controls
-
Increase or decrease the volume of the sound coming from the built-in speakers and headphone out port.
Num Lock key
Activate the numeric keypad embedded in the PowerBook keyboard. When the numeric keypad is activated, a green light glows on the key.
Video Mode Toggle key
Use this key to switch between dual-display mode and video-mirroring mode.
Keyboard illumination controls
Increase or decrease the brightness of your keyboard illumination.
Media Eject key
Press and hold this key to eject a disc. You can also eject a disc by dragging its desktop icon to the Trash.
Microphone
Record sounds directly on your PowerBook hard disk with this built-in microphone (located under the left speaker cover).
Built-in speakers (2)
Listen to music, movies, games, and multimedia.
Function (Fn) key
Press and hold this key to activate the function keys (F1 to F12).
Sleep indicator light
A white light pulsates when the PowerBook is in sleep.
Display release button
Push this button to release your display and open your PowerBook.
Trackpad
Move the pointer on the PowerBook display.
Slot-loading optical drive
Your SuperDrive can read CD-ROM discs, Photo CDs, standard audio discs, DVD-ROM and DVD-R discs, DVD movies, and other kinds of media. It can also write music, documents, and other digital files on CD-R, CD-RW, and DVD-R discs.
Power button
®
Turn your PowerBook on and off or put it to sleep.
AirPort Extreme/Bluetooth antenna windows
With an optional AirPort Extreme Base Station or other wireless hub, connect to the Internet wirelessly. You can also wirelessly connect to devices equipped with Bluetooth wireless technology, such as mice, keyboards, personal digital assistants, and cell phones.
For additional information about AirPort Extreme or your optical drive, see Chapter 3, “Using Your Computer,” on page 31.
Chapter 1
Getting Started
7

Additional Features of Your PowerBook

¯ Power
adapter port
USB 2.0 port
®
PC Card slot
Security slot
USB 2.0 port
W
Internal
modem port
FireWire 800 port
FireWire 400 port
Gigabit Ethernet port
G
(10/100/1000Base-T)
Audio line in port
S-video out port
Æ
Headphone
f
out port
®
DVI port
8 Chapter 1
Getting Started
Security slot
Protect your PowerBook by connecting a security cable.
Power adapter port
¯
Plug in the included Apple Portable Power Adapter to recharge your PowerBook battery.
Internal modem port
W
Connect a standard phone line directly to the internal modem.
Two USB 2.0 (Universal Serial Bus) ports
Connect additional equipment to your PowerBook, such as printers, external storage devices, digital cameras, modems, keyboards, and joysticks.
PC Card slot
Expand the capabilities of your PowerBook using the PC Card slot that supports Type I, Type II, and CardBus formats.
Audio line in port
Connect your PowerBook to a line-level microphone or other audio equipment.
Headphone out port
f
Connect external speakers, headphones, or other sound output devices.
Two FireWire ports
Connect high-speed external devices, such as digital videocameras, and external storage devices. You can connect a standard 6-pin FireWire device directly to the FireWire 400 port, or you can use a 9-to-6-pin FireWire cable to connect the device to the FireWire 800 port. You can also directly connect a 9-pin FireWire device to the FireWire 800 port. For more information, see page 34.
Gigabit Ethernet port (10/100/1000Base-T)
G
Connect to a high-speed 10/100/1000Base-T Ethernet network or connect to another computer and transfer files. The Ethernet port auto-sensing feature detects other Ethernet devices and doesn’t require an Ethernet crossover cable in order to connect.
TV out (S-video out) port
Æ
Connect your PowerBook to a television, VCR, or other video device. You can use the TV out port for presentations or to play a DVD-Video on your television.
DVI (external monitor) port
Connect to an external monitor or projection device that uses a DVI connector, or use the included DVI-to-VGA adapter to connect a VGA monitor. You can also use a DVI-to-ADC adapter (sold separately) to connect to an Apple flat-panel display.
For additional information about these features, see Chapter 3, “Using Your Computer,” on page 31.
Chapter 1
Getting Started
9

Setting Up

Your PowerBook is designed so that you can set it up quickly and start using it right away.
Step 1: Plug In the Power Adapter
m
Plug the AC plug of your power adapter into an outlet and the power adapter plug into the PowerBook power adapter port.
AC plug
Important:
Be sure to snap the electrical prongs on your AC plug into their completely
extended position before you plug the adapter into the outlet.
Power adapter port
AC plug
Power adapter plug
AC cord
¯
®
To extend the reach of your power adapter, you can attach the AC cord if desired. See “Using Your Power Adapter” on page 21.
10 Chapter 1
Getting Started
Step 2: Prepare to Get Connected
The first time you start up your computer, a setup assistant welcomes you and takes you through the registration process. It will also help you set up your computer and Internet connection. Internet access usually requires an account with an Internet service provider (ISP). Fees may apply.
Setting up your Internet connection usually requires you to supply information such as the account name your ISP gives you. If you’re not ready to set up your connection yet, you can skip that process and come back to it later. See Appendix C, “Connecting to the Internet,” on page 73 for information about how to set it up later. If you are ready, gather the information below for the type of connection you’ll be using.
You can write information from your ISP or network administrator on these pages, then enter it in Setup Assistant.
To set up a telephone dial-up connection, gather the following information:
Service provider name
User or account name
Password
ISP phone number
Alternate phone number
Dialing prefix to obtain an outside line
To set up a DSL, cable modem, LAN, or AirPort Extreme wireless connection:
m
First, choose your connection method (ask your system administrator or your ISP, if you don’t know):
Manually
Using DHCP with a manual address
Using DHCP
Using BootP
PPP
If you’re unsure which method to use, “Using DHCP” may be a good choice, because the network supplies most of the required information for you automatically.
If you selected “Manually” or “Using DHCP with a manual address,” gather the following:
IP address
Subnet mask
Router address
Note: If you selected “Using DHCP with a manual address,” you don’t need a subnet mask or router address.
Chapter 1 Getting Started 11
If you selected “Using DHCP,” gather the following optional information (ask your ISP if you need it):
DHCP client ID
DNS servers
If you selected “PPP” (for PPPoE connections), gather the following:
Service provider
Account name
Password
PPPoE service name
The information below is optional. Ask your ISP or system administrator if you need it.
DNS servers
Domain name
Proxy server
Step 3: Connect Your Cables
Next, connect your PowerBook to a phone line, DSL modem, cable modem, or Ethernet network. If you’re connecting to a wireless AirPort Extreme 802.11b or 802.11g network, you don’t need cables.
To connect to a phone line:
m
Connect the phone cord from a wall jack to the internal modem port for a dial-up connection.
Telephone cord
W
Internal modem port
12 Chapter 1 Getting Started
®
Make sure you connect the internal modem to an analog phone line—the kind used typically in homes. The modem will not work with a digital phone line.
Warning: Do not connect a digital telephone line to the modem; the wrong
type of line could damage the modem. Contact your telephone service provider if you are unsure whether you have a digital telephone line.
For more information about your modem, see “Using Your Modem” on page 40. For information on other types of connections, see Appendix C, “Connecting to the Internet,” on page 73.
To connect to a DSL or cable modem or an Ethernet network:
m
Connect the cable to your DSL or cable modem as shown in the modem instructions, or connect the Ethernet cord to the Ethernet hub or outlet. Then connect the other end of the cord to the computer’s Ethernet port.
Ethernet cord
®
®
G
Gigabit Ethernet port (10/100/1000Base-T)
Chapter 1 Getting Started 13
Step 4: Turn On Your PowerBook
With your setup information gathered, you’re ready to start up your computer. Setup Assistant launches automatically to help you.
1 To turn on the computer, press the Power button (®).
Note: Press the Power button once briefly (up to one second). Holding down the Power button as your computer starts up may shut down your computer again.
You should hear a tone when you turn on the computer. It takes the computer a few moments to start up.
Power button
®
®

Problems Turning the Computer On?

Nothing happens when you press the Power button.
The battery may be drained. Make sure that you plugged the power adapter firmly
into both the computer and a power source. The plug should light when you plug it into the computer.
If the computer still doesn’t start up, see “Problems That Prevent You From Using
Your Computer” on page 60.
You see a picture of a disk or a folder with a blinking question mark.
This icon usually means that the computer can’t find the system software on the
hard disk or any disks attached to the computer. Try restarting. Hold down the Power button for 4 to 5 seconds until the computer turns off. Then press the Power button again. If the problem persists, you may need to reinstall the system software. See “Restoring Your Computer’s Software” on page 63.
14 Chapter 1 Getting Started
2 Use your PowerBook trackpad to select and move items on the screen, much as you
use a mouse with a desktop computer.
To move the arrow pointer on the screen, slide your finger across the trackpad.
To select, click, or double-click an item on the screen, use the trackpad button.
®
Trackpad
Trackpad button
For tips on using the trackpad, see “Tips for Using the Trackpad” on page 22.
Congratulations, you’re up and running!
Chapter 1 Getting Started 15

How Do I Turn My PowerBook Off?

When you have finished working with your PowerBook, you can put your computer to sleep or shut it down.

Putting Your PowerBook to Sleep

If you will be away from your PowerBook for only a short time, put the computer to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process.
To put the computer to sleep, do one of the following:
Close the display.
Choose Apple (K) > Sleep from the menu bar.
Press the Power button (®) and click Sleep in the dialog that appears on the screen.
Warning: Wait a few seconds until the white sleep light on the display latch starts
pulsating (indicating that the computer is in sleep and the hard disk has stopped spinning) before you move your PowerBook. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data or the inability to start up from the hard disk.
To wake the computer:
If the display is closed, open it. Your PowerBook automatically wakes from sleep when
you open the display.
If the display is already open, press the Power button (®) or any key on the keyboard.
16 Chapter 1 Getting Started

Shutting Down Your PowerBook

If you aren’t going to use your PowerBook for a day or two, shut it down.
To shut down your computer, do one of the following:
Choose Apple (K) > Shut Down from the menu bar.
Press the Power button (®) and click Shut Down in the dialog that appears.
If you plan to store your PowerBook for an extended period of time, see “Storing Your PowerBook” on page 68 for information on how to prevent your battery from draining completely.

Calibrating Your Battery

To get the longest running time from your PowerBook battery, complete the following steps during the first week you have your PowerBook.
To initially calibrate your battery, follow these steps:
1 Plug in the power adapter and fully charge your PowerBook battery until the light on
the power adapter plug changes to green and the onscreen meter in the menu bar indicates that the battery is fully charged.
2 Disconnect the power adapter and operate your PowerBook solely off of the battery.
When the battery gets low, you will see the first low-battery warning dialog on the screen. Continue to run the PowerBook off its battery until it goes to sleep; at that point the battery has been sufficiently drained for calibration.
3 Connect the power adapter and leave it connected until the battery is fully charged
again.
Important: You only have to fully discharge and then charge your battery once to
calibrate it. After that, you can connect and disconnect the power adapter when the battery is at any charge level.
If you purchased additional batteries, repeat the calibration procedure with the additional batteries as well. For more information about your power adapter and battery, see “Using Your Power Adapter” on page 21 and “Battery” on page 47.
Chapter 1 Getting Started 17

What’s Next?

Learn the important basics about your PowerBook. Check out Chapter 2, “The Basics,”
on page 19.
Have fun trying out your computer’s applications and Internet features. Browse the
Mac OS X and applications booklet that came with your computer.
If you’re unfamiliar with Mac OS X, open Mac OS Help and browse the information.
Switching from another computer? Open Mac OS Help and see the New Users
section. It will help you use your previous computer knowledge to get started on a Mac.

What If I Have More Questions?

Mac OS Help
Most of the information about using your Macintosh is available right on your computer.
1 Click the Finder icon in the Dock (the bar of icons at the bottom of the screen).
2 Choose Help > Mac Help (click the Help menu in the menu bar and choose Mac Help).
3 Click the Search field, type a question, and press Return on your keyboard.

Other Support

If you’re having a problem that prevents you from using your computer, see
Chapter 5, “Troubleshooting,” on page 59.
Check out the top ten most commonly asked questions. See Appendix D, “Top Ten
Questions,” on page 91.
For support information, user discussion boards, and the latest Apple software
downloads, go to www.apple.com/support.
If you can’t find the answer to your problem in these places, see the AppleCare materials that came with your computer for information on contacting Apple.
18 Chapter 1 Getting Started

2 The Basics

2
This chapter introduces important basics about your PowerBook that you’ll want to know.

Getting to Know Your New PowerBook

Because your PowerBook is so thin and light, you can take it with you to the office, library, class, or wherever you work or play.
Whenever you stop using your PowerBook, wait a few moments to let the hard disk and any optical disc in your drive stop spinning before you transport the computer. Avoid jostling or bumping your PowerBook while discs are spinning.
When using your PowerBook or when charging the battery, it is normal for the bottom of the case to get warm. For prolonged use, place your PowerBook on a flat, stable surface. The bottom of the case is raised slightly to allow airflow that keeps the unit within normal operating temperatures.
As you get to know your new computer, you may hear small noises during startup and when using your hard disk and optical drives. For example, your hard disk and optical drives may whir and click as they access information or load and eject discs. After the PowerBook runs for some time, a small fan may turn on to cool it, producing a faint sound. Small noises are part of the PowerBook’s normal functioning.
For more safety instructions about handling and using your PowerBook in different locations, be sure to see Appendix B, “Safety, Use, and Care Information,” on page 67.
19

Adjusting Your Display

Once you begin working with your new PowerBook, you may need to adjust your display so that the screen is easier to see. Use the keys labeled with the ¤ icon to adjust screen brightness.
¤ Brightness controls
Keyboard illumination controls
®
ALS sensor
ALS sensor
Your computer has keyboard illumination and an ambient light-sensing (ALS) system. The ALS sensors are located under the speaker grilles and will automatically adjust the brightness of your display and keyboard illumination according to the light available in your current environment. You can also adjust the keyboard illumination using the F8, F9, and F10 keys.
Important: Even when the keyboard illumination feature is on, the keyboard
illuminates only in low-light situations.
To turn off the automatic display brightness feature:
m
Choose Apple (K) > System Preferences from the menu bar. Open the Displays pane and deselect the automatic brightness checkbox.
You can turn off the keyboard illumination feature in the Keyboard & Mouse pane of System Preferences or by pressing the F8 key.
Note: Exposé is preset to use the F9 and F10 keys, the same keys that adjust your keyboard illumination. To use Exposé to manage your desktop windows, hold down the Fn key and press F9 or F10, or open the Exposé pane in System Preferences and choose different function keys to manage windows.
20 Chapter 2 The Basics

Changing the Size of Images on the Screen

Your PowerBook has a wide-screen display that has a “native” resolution of 1440 x 900 and that supports other standard resolutions such as 1024 x 768.
Use a standard resolution when mirroring your screen on an external monitor or when using applications such as games or presentation software designed for a standard resolution.
When you use a standard resolution, a black band appears on each side of the display. If you do not want to see the black bands, you can choose a “stretched” version of the resolution to stretch the image to cover the entire screen and eliminate the black bands.
You can choose scaled resolutions of 1152 x 768 or smaller from the Displays pane of System Preferences. When you switch to a scaled resolution, items on the screen appear larger, making them easier to see. Scaled resolutions may not be as sharp as they are at the display’s native resolution.
To adjust the resolution on your display:
m
Choose Apple (K) > System Preferences from the menu bar. Open the Displays pane of System Preferences.
To control your display settings using the Displays icon in the menu bar, click “Show displays in menu bar.”

Using Your Power Adapter

Plugging in the power adapter provides AC power to the computer and recharges the computer’s battery.
Important: For optimal performance, use only the power adapter that came with your
computer, or purchase an additional 65W Apple Portable Power Adapter.
When you first connect your power adapter to your computer, a light glows green for a second to indicate power is available. An amber light indicates that the battery is being charged. A green light indicates that the battery is fully charged. You can monitor the battery level using the Battery icon in the menu bar or by checking the battery level indicator lights on the bottom of the battery (see page 47).
Chapter 2 The Basics 21
To extend the reach of your power adapter, remove the AC plug from the adapter. Attach the included AC cord to the adapter and insert the other end into a wall outlet.
AC cord AC plug
Warning: Make sure the power adapter is fully assembled before plugging it into an
electrical outlet. If you’re using the AC plug with your power adapter, make sure the two prongs are snapped into their completely extended position before plugging in the adapter.
Use only the AC cord that came with your power adapter. Make sure to push the power plug snugly into the power adapter port on the computer to ensure it is engaged and power is flowing to the computer.
When disconnecting the power adapter from an outlet or from the computer, pull the plug, not the cord.
For safety instructions about using your power adapter, see “Plugging In the Power Adapter” on page 67.

Using the Trackpad

The trackpad is sensitive to how quickly you move your finger. To move the pointer a short distance across the screen, move your finger slowly across the trackpad. The faster you move your finger, the farther the pointer moves on the screen.

Tips for Using the Trackpad

For best results when using the trackpad, keep in mind these tips:
Use only one finger. Using more than one finger may cause erratic pointer
behavior.
Do not use a pen or any other object.
Keep your finger and the trackpad dry. If the trackpad becomes moist from
humidity or condensation, gently wipe it with a clean cloth before you use it.
Never use any kind of cleaning solution on the trackpad.
For more information on using the trackpad, choose Help > Mac Help from the menu bar at the top of the screen.
22 Chapter 2 The Basics
Instead of using the trackpad button, you can use your finger to click and double-click directly on the trackpad. You can turn on this and other trackpad options in the Keyboard & Mouse pane of System Preferences.
Note: If you find that the pointer moves as you type because you accidentally brush the trackpad, make sure that the “Ignore accidental trackpad input” option in the Keyboard & Mouse pane of System Preferences is selected.

Using the Keyboard

Your PowerBook keyboard has a numeric keypad incorporated in the standard keyboard keys. Keys used for the numeric keypad have a smaller secondary label.
Num Lock key
Numeric keypad
®
To use the numeric keypad, press the Num Lock key. The Num Lock key glows green, indicating that the keypad is active. When you’re finished, press the Num Lock key again to turn it off.
Important: If your keyboard doesn’t seem to be working correctly, check the Num Lock
key. When the numeric keypad is active, other keys and keyboard equivalents for menu commands (such as x-Q to quit) are deactivated.
If you like to use keyboard shortcuts to work efficiently, choose Help > Mac Help from the menu bar and search for “shortcuts.” You’ll find quite a list of keyboard shortcuts for many common procedures and applications.
Chapter 2 The Basics 23

Using a Mouse

If you have an Apple mouse with a USB connection, you can insert the USB connector into the USB 2.0 port and use your mouse right away. You can purchase a USB mouse from an Apple Authorized Reseller or from the Apple Store website: www.apple.com/store.

Learning About Mac OS X

Your computer comes with Mac OS X and features Classic, an environment for using Mac OS 9 applications while the computer is running Mac OS X.
Note: Mac OS 9 cannot be installed as the primary operating system on your PowerBook.
When you’re ready to learn more about Mac OS X and your Apple applications, see the Mac OS X booklet that came with your PowerBook. Also open Mac OS Help and browse the information there. You’ll find plenty of information for new users, experienced users, and people switching to the Mac. If you experience any problems while using Mac OS X, see the troubleshooting tips in the back of this book or choose Help > Mac Help from the menu bar at the top of the display.
For information about the compatibility of software applications with Mac OS X, or to read more about Mac OS X, check the Apple website: www.apple.com/macosx.

Customizing Your Desktop and Setting Your Preferences

You can quickly make your desktop look the way you want using System Preferences. Choose Apple (K) > System Preferences from the menu bar.
24 Chapter 2 The Basics
Note: Because Apple frequently releases new versions and updates to its system software, applications, and Internet sites, images shown in this book may be slightly different from what you see on your screen.
Feel free to make changes and experiment with the following:
Appearance: Select this preference pane to change the colors of buttons, menus,
windows, and highlight colors, among other options.
Desktop & Screen Saver: Select this preference pane to change the background color
or pattern of your desktop, or change it to a photo or image you like. You can also choose an eye-catching screen effect that will appear on your screen when the computer is left idle.
Dock: Select this preference pane to change the look, location, and behavior of your
Dock.
As you get to know your computer, explore the other panes in System Preferences. It is your command center for most settings on your PowerBook. For more information, choose Help > Mac Help from the menu bar and search for “System Preferences” or for the specific preference pane you want to change.

Connecting to a Printer

To use a printer with your PowerBook, follow the instructions that came with the printer to install required software and connect the printer. Many printers connect via a USB cable; others are accessed via a network connection, such as Ethernet. For more information about your USB ports, see “Universal Serial Bus (USB)” on page 32. For more information about a network or wireless connection, see “Ethernet (10/100/ 1000Base-T)” on page 39 and “AirPort Extreme Wireless Networking and Internet Access” on page 38.
After connecting and setting up your printer, use the Print & Fax pane of System Preferences to select your printer for use. If you’re connecting to a printer via a network, you may need to know the network name or address of the printer to select it. If you have a USB printer connected to an AirPort Extreme Base Station, you can connect to the printer and print wirelessly.
To set up a printer:
1 Open System Preferences and click the Print & Fax icon.
2 Click the Set Up Printers button.
3 Click the Add button.
Chapter 2 The Basics 25
4 Choose the type of connection for your printer (for example, USB, AppleTalk, and so on)
from the pop-up menu.
To add a USB printer connected to an AirPort Extreme Base Station, choose Rendezvous from the pop-up menu.
5 Select or enter your printer information and click Add.

Monitoring Printing

Once you’ve sent a document to a printer, you can monitor printing and halt or put it temporarily on hold.
To monitor printing:
m
Click the Printer icon in the Dock to open the Printer window.
You can now see the print jobs in the print queue and work with them. For more information, choose Help > Mac Help from the menu bar and search for “printing.”

Playing a CD and Connecting Headphones

If you’d like to listen to music while you work, insert a music CD in your optical drive. iTunes, an easy-to-use music player, appears automatically on the screen. You can also connect headphones with a minijack to the headphone out port of your PowerBook for private listening. To learn more about iTunes, open iTunes and see the iTunes onscreen help. To learn more about your optical drive, see “Using Your SuperDrive” on page 44.

Keeping Your Software Up to Date

You can connect to the Internet and automatically download and install the latest free software versions, drivers, and other enhancements from Apple.
When you are connected to the Internet, Software Update checks Apple’s Internet servers to see if any updates are available for your computer. You can set your Mac to check the Apple server periodically and download and install updated software.
26 Chapter 2 The Basics
To check for updated software:
1 Open System Preferences.
2 Click the Software Update icon and follow the directions on the screen.
For more information, search for “Software Update” in Mac OS Help.
For the latest information on the Mac OS, go to the Mac OS website at
www.apple.com/macos.

Connecting a Camera or Other FireWire or USB Device

If you have a digital camera, videocamera, scanner, or other device that has a FireWire or USB connector, you can connect it to your PowerBook. Follow the installation instructions that came with your device. For more information about FireWire, see “FireWire” on page 34. For more information about USB, see “Universal Serial Bus (USB)” on page 32.

Connecting to a Network

If you want to connect your PowerBook to an Ethernet network or a wireless network, see “Ethernet (10/100/1000Base-T)” on page 39 and “AirPort Extreme Wireless Networking and Internet Access” on page 38 for more information about setting up an Ethernet or AirPort Extreme connection. Also choose Help > Mac Help from the menu bar and search for “Ethernet” or open AirPort Admin Utility and choose Help > AirPort Help.
Chapter 2 The Basics 27

Using the Internet

During the initial setup, you were instructed on how to connect to the Internet. If you need to change to a different type of connection, such as DSL, cable modem, Ethernet local area network (LAN), or AirPort Extreme network, you can find more information in Appendix C, “Connecting to the Internet,” on page 73.

Transferring Files to Another Computer

If you want to transfer files or documents to or from your PowerBook, there are several ways of doing it.
If you have a USB or FireWire external hard disk or other drive, you can use it to
transfer files from one computer to another.
You can transfer files via the Internet using .Mac or another Internet account.
You can transfer files to another computer on a network. You can access another
server or computer by clicking Network in the Finder Sidebar or by choosing Go > Connect to Server from the Finder menu bar.
You can create a small Ethernet network by connecting an Ethernet cable from your
PowerBook to another computer’s Ethernet port. For more information, choose Help > Mac Help in the menu bar and search for “connecting two computers.”
You can also connect to another Mac using a FireWire cable. When you start up your
computer in FireWire Target Disk Mode, your PowerBook appears as a disk drive on the other computer and you can transfer files. For information about using FireWire to transfer files, see “FireWire Target Disk Mode” on page 35.
You can connect to an AirPort Extreme 802.11g or 802.11b wireless network to transfer
files. For more information, see “AirPort Extreme Wireless Networking and Internet Access” on page 38.
If you have access to devices that communicate via Bluetooth wireless technology,
you can transfer files using Bluetooth wireless technology. For more information, see “Using Bluetooth Devices” on page 37.
For general information about transferring files and documents, open Mac OS Help and search for the type of connection you need.
28 Chapter 2 The Basics

When an Application Freezes

On rare occasions, an application may freeze on the screen. Mac OS X provides a way to quit a frozen application without restarting your computer. Quitting a frozen application may allow you to save your work in other open applications.
To force an application to quit:
1 Press Command (x)-Option-Esc or choose Force Quit from the Apple (K) menu.
The Force Quit Applications dialog appears with the application selected.
2 Click Force Quit.
The application quits, leaving all other applications open.
If needed, you can also force the Classic environment to quit, which closes all Classic applications. You can also restart the Finder from this dialog.
If you’re experiencing other problems, see Chapter 5, “Troubleshooting,” on page 59.
Chapter 2 The Basics 29

3 Using Your Computer

Your PowerBook has many built-in features and connection capabilities that you can customize and expand to fit your needs.
These include the following:
Universal Serial Bus (USB) 2.0 ports for connecting additional equipment such as
printers, scanners, and other devices to your PowerBook. See page 32.
FireWire 400 and 800 ports for connecting high-speed equipment such as digital
videocameras and external hard drives. See page 34.
A PC Card/CardBus slot. See page 36.
Bluetooth wireless connectivity, AirPort Extreme wireless networking capability,
Ethernet networking capability, and a 56K modem for networking and communications. See page 37.
Audio line in and headphone out ports for connecting headphones, speakers,
microphones, and other audio equipment. See page 40.
DVI video output with the included DVI-to-VGA adapter, which lets you use your
PowerBook with an external monitor or digital flat-panel display, including support for video-mirroring and extended desktop (dual-display) modes. Use the built-in S-video support to display content on your television. See page 41.
A SuperDrive that allows you to play and create CDs and DVDs. See page 44.
Security slot so that you can make sure your PowerBook stays where it should.
See “Security Slot” on page 50.
3
31

Universal Serial Bus (USB)

Your PowerBook comes with two USB 2.0 ports ( ), also referred to as Hi-Speed USB, which you can use to connect many types of external devices, including printers, scanners, digital cameras, game pads, joysticks, keyboards, and floppy disk drives. Your USB 2.0 ports are compatible with earlier USB devices. In most cases you can connect and disconnect a USB device while the computer is running. Once you connect the device, it is ready to use. You don’t need to restart or reconfigure your computer.
®

Using USB Devices

To use a USB device with your computer, simply connect the device to the computer. Your computer automatically loads the correct software whenever you connect a new device.
Note: Apple has already included software to work with many USB devices. If your PowerBook cannot find the correct software when you connect a USB device, you can either install the software that came with the device or follow the onscreen prompts to use the Internet to locate, download, and install the correct software.

USB Devices and Battery Power

You can use USB devices, such as joysticks and keyboards, that get power from the USB connection instead of a separate power adapter with your PowerBook. However, these types of USB devices can cause your PowerBook battery to become depleted faster. If you are using the device for an extended period, it is a good idea to connect the PowerBook power adapter.
32 Chapter 3 Using Your Computer

Using Multiple USB Devices at the Same Time

If you want to use more than two USB devices at the same time, you can purchase a USB hub. The USB hub connects to an open USB port on your computer and provides additional USB ports (usually four or seven). Most USB hubs also have a power adapter and should be plugged into an outlet.
®
USB hub

For More Information on USB

Additional information on USB is available in Mac OS Help. Choose Help > Mac Help in the menu bar and search for “USB.” You can also find information on the Apple USB website at www.apple.com/usb.
For information on USB devices available for your computer, check the Macintosh Products Guide at www.apple.com/guide.
Chapter 3 Using Your Computer 33

FireWire

Your computer has one FireWire 400 and one FireWire 800 port ( ). With FireWire, you can easily connect and disconnect external high-speed devices—such as DV cameras, printers, scanners, and hard disks—without restarting your computer.
You can connect a standard 6-pin FireWire device directly to the FireWire 400 port. You can use a 9-to-6-pin FireWire cable to connect the device to the FireWire 800 port. You can also connect 9-pin FireWire devices directly to the FireWire 800 port, for even faster connections. Both ports provide power to connected devices (so the devices don’t need an additional power plug).
FireWire 400 port
(6-pin)
FireWire 800 port
(9-pin)
These are some of the things you can do with FireWire:
Connect a digital videocamera and capture, transfer, and edit high-quality
video directly on your computer using video-editing software such as iMovie or Final Cut Pro.
Connect an external FireWire hard disk drive and use it to back up data or
transfer files.
Start up from an external FireWire hard disk. Connect an external FireWire hard disk
(with a valid operating system installed on it), open the Startup Disk pane of System Preferences, and click the FireWire hard disk. Restart your computer.

Using FireWire Devices

To use a FireWire device with your computer, connect the device to the computer and install any software that came with the device. Your computer automatically detects newly connected devices.
34 Chapter 3 Using Your Computer
®

FireWire Devices and Battery Power

FireWire devices, such as certain external hard disks, can get power from the PowerBook FireWire connection instead of a separate power adapter. However, these types of FireWire devices will cause your PowerBook battery to become depleted faster. If a device will be connected for an extended period, it is a good idea to connect the PowerBook power adapter.
Note: The FireWire ports are designed to support power for FireWire devices (up to 7 watts maximum). You can connect multiple devices to each other and connect the “daisy-chain” of devices to a FireWire port on your computer, but only one device should get power from the computer. The rest of the devices in the daisy-chain should be powered by separate power adapters. Connecting more than one FireWire device that gets power from the port may cause problems. If a problem occurs, shut down the computer, remove the FireWire devices, and restart your computer.

FireWire Target Disk Mode

If you want to transfer files between your PowerBook and another FireWire-equipped computer, or you have a problem that prevents your computer from starting up, you can use FireWire Target Disk Mode to connect to another computer and access your files. When you start up your computer in FireWire Target Disk Mode, the other computer can access your PowerBook as if it were a hard disk.
Note: When using FireWire Target Disk Mode, it’s a good idea to connect your power adapter to the PowerBook.
To connect your PowerBook to another computer in FireWire Target Disk Mode:
1 Make sure that your PowerBook is shut down.
2 Use a FireWire cable to connect your PowerBook to another FireWire-equipped
computer. You can use a FireWire cable with any combination of 6-pin and 9-pin connectors.
3 Start up your PowerBook and immediately hold down the T key. Your PowerBook
display shows the FireWire logo. The other computer’s display shows the PowerBook internal hard disk icon. You can now drag and drop files between the computers.
4 When you are finished transferring files, drag the PowerBook hard disk icon to the
Trash.
5 Press the Power button on the PowerBook to shut it down, and then disconnect the
FireWire cable.

For More Information on FireWire

Additional information on FireWire is available in Mac OS Help. Choose Help > Mac Help in the Finder menu bar and search for “FireWire.” You can also find information on the Apple FireWire website at www.apple.com/firewire.
Chapter 3 Using Your Computer 35

PC Cards

You can expand your computer’s capabilities using the PC Card slot. You can connect hard drives, compact Flash card readers, and more. Your PowerBook has one PC Card slot that accepts Type I and Type II PCMCIA cards, including CardBus-format cards. You can insert a PC Card when your computer is on, off, or in sleep.
®
PC Card slot
Eject button
Important: The Apple AirPort Extreme Card is installed in a slot inside the computer.
It doesn’t go in the PC Card slot the way many third-party wireless cards do. The AirPort Extreme Card will not work if it is installed in the PC Card slot and will cause your computer to function improperly.

Inserting and Ejecting a PC Card

When inserting a PC Card, make sure the label is facing up and the card is level. You’ll feel some resistance as you slide the card in. When the card is firmly seated in the slot, it clicks into place and an icon may appear on the desktop. You can eject a PC Card when your computer is on or off, but not when it is in sleep.
To eject a PC Card:
1 If the computer is turned on, drag the card’s icon to the Trash.
2 Push the PC Card Eject button once to release the button.
3 Push the button again to eject the card.
4 Pull the card out of the slot and then push the Eject button again to set it flush against
the computer.
36 Chapter 3 Using Your Computer

For More Information on PC Cards

For information on the PC Cards available for your PowerBook, check out the Macintosh Products Guide at www.apple.com/guide.

Using Bluetooth Devices

Your PowerBook can connect to and transfer information wirelessly to devices that use Bluetooth® wireless technology, such as cell phones and personal digital assistants (PDAs). Bluetooth wireless technology can help eliminate the need for the cables that traditionally connect devices together. Devices with Bluetooth wireless technology can connect to each other wirelessly within a 10-meter (33-foot) range.
Bluetooth wireless technology devices include:
Computers
Cell phones
Peripherals (keyboard, mouse, and so on)
PDAs
With Bluetooth wireless technology, you can do the following:
Use your PowerBook to communicate with a mobile phone equipped with Bluetooth
wireless technology. Your phone can act as a modem to connect you to a wireless service provider, at speeds of up to 56 kilobits per second (kbit/s), so you can use your mobile phone to access the Internet.
Communicate with your handheld PDA. Using iSync, you can perform a hot sync
operation without cables or send your business card or calendar events directly to a colleague’s PDA.
Transfer files between computers, even Mac to PC, using the transfer utility. Apple
still recommends the use of AirPort Extreme wireless networking, however, for anything but the smallest files.

For More Information on Bluetooth Wireless Technology

You can get help using Bluetooth wireless technology by opening the Bluetooth File Exchange application (located in the Utilities folder within the Applications folder) and choosing Help > Bluetooth Help. You can also find information on the Apple website at www.apple.com/bluetooth.
Chapter 3 Using Your Computer 37

AirPort Extreme Wireless Networking and Internet Access

Your PowerBook has an AirPort Extreme Card installed. AirPort Extreme offers an easy and affordable way to provide wireless Internet access anywhere in the home, at work, or in the classroom. Instead of using traditional cables, AirPort Extreme uses wireless local area network (LAN) technology to provide wireless communication between multiple computers. Through a wireless network you can set up access to the Internet, transfer files, play multiplayer games, and more.
The AirPort Extreme Card is compatible with both the Apple AirPort Extreme Base Station and the original Apple AirPort Base Station and any 802.11b or 802.11g compliant products.
Note: Wireless Internet access requires an AirPort Extreme Card, an 802.11b or 802.11g access point such as an AirPort Extreme Base Station or AirPort Base Station, and Internet access (fees may apply). Some Internet service providers are not currently compatible with AirPort. Range may vary with site conditions.

How AirPort Extreme Provides Wireless Internet Access

With AirPort Extreme, you set up a wireless connection to a device known as a base station, which has a physical connection to the Internet. AirPort Extreme technology
works like a cordless telephone. The AirPort Extreme Card in the computer makes a wireless connection to the base station, which is connected to the telephone line or a DSL or cable modem.

For More Information on AirPort Extreme

To purchase an AirPort Extreme Base Station, contact your Apple Authorized Reseller or go to the Apple Store at www.apple.com/store.
38 Chapter 3 Using Your Computer
Connection to the Internet
AC outlet
AirPort Extreme Base Station
®
Additional information on AirPort Extreme is available in AirPort Help. Choose Help > Mac Help from the menu bar, then choose Library > AirPort Help from the menu bar. You can also find information on the Apple AirPort website at www.apple.com/airport or at www.apple.com/support.

Ethernet (10/100/1000Base-T)

Your computer comes with built-in 10/100/1000 megabit per second (Mbit/s) twisted­pair Ethernet networking capability, which you can use to connect to a network, including a Gigabit Ethernet network, or to a cable or DSL modem.
®
Connecting to a network gives you access to other computers. You may be able to store and retrieve information; use network printers, modems, and email; or connect to the Internet. You can also use Ethernet to share files between two computers or set up a small network. The Ethernet port on your PowerBook automatically detects other Ethernet devices. You don’t need an Ethernet crossover cable when connecting to other Ethernet devices.
Use 2-pair category 3 (or higher) Ethernet cables to connect to a 10Base-T Ethernet
network.
Use 2-pair category 5 (or higher) Ethernet cables to connect to a 100Base-T Ethernet
network.
Use 4-pair category 5 (or higher) Ethernet cables to connect to a 1000Base-T Ethernet
network.
Chapter 3 Using Your Computer 39

For More Information on Using Ethernet

Additional information, including setting up an Ethernet network and transferring files using Ethernet, is available in Mac OS Help. Choose Help > Mac Help from the menu bar and search for “Ethernet” or “network.”
For information on networking products you can use with your PowerBook, check the Macintosh Products Guide at www.apple.com/guide.

Using Your Modem

Your computer comes with an Apple 56K v.92 modem installed. To connect the modem, plug one end of the phone cord or RJ-11 cable into the modem port on the computer and the other end into a standard RJ-11 telephone wall jack.
Make sure you connect to an analog phone line—the kind used typically in homes. The modem will not work with a digital phone line.
Warning: Do not connect a digital telephone line to the modem as it could damage
the modem. Contact your telephone service provider if you are unsure whether you have a digital telephone line.
For information on how to establish an Internet connection, see Appendix C, “Connecting to the Internet,” on page 73. More information about the internal modem is also available in Mac OS Help.

Connecting Speakers and Audio Devices

Your PowerBook comes with two built-in speakers, a built-in microphone, an audio line in port, and a headphone out port.
Note: While devices are plugged in, sound won’t come through your built-in speakers. Unplug any headphones or speakers to hear the computer speakers.
You can connect external speakers, headphones, and other sound output devices to the headphone out port. The headphone out port is a stereo 3.5 mini-phono jack. The jack doesn’t provide power to connected devices, so you must use self-powered headphones and speakers.You can record sound onto your hard disk using the built-in microphone located under the left speaker grille. You can also connect external microphones or other audio equipment to the audio line in port. The audio line in port is a stereo 3.5 mini-phono jack, which does not provide power to a connected device, so you must use self-powered peripherals. For applications, such as iMovie, that can record sounds, use the Sound pane of System Preferences to select the audio input device you want to use, including microphones connected via USB.
40 Chapter 3 Using Your Computer
The volume controls on your keyboard allow you to easily change volume. You can also access these controls from the Sound pane of System Preferences.
For more information about using or troubleshooting sound on your computer, open Mac OS Help and search for “sound.”

External Video Support (DVI, VGA, and S-Video)

Your computer has an external monitor (DVI) port that allows you to directly connect a display or projector with a DVI port. Use the included DVI-to-VGA adapter to connect your PowerBook to monitors and projectors that have VGA connectors.
The TV out port (also known as an S-video out port) on your computer lets you connect to a television, videocassette recorder (VCR), or video projection system using an S-video cable. You can use TV out to display images on a television, record computer images on a VCR, or play DVD-Video discs on your television.
If the device you want to connect has a composite port rather than an S-video port, you can use the S-video-to-composite adapter that came with your PowerBook.
DVI port
S-video out port
®
When an external monitor or television is connected, you can either have the same image appear on both the internal display and the external monitor (known as video- mirroring) or use the external monitor to extend the size of the Mac OS desktop (known as dual-display mode). By default, your PowerBook starts up in dual-display mode. Press the F7 ( ) key to switch between dual-display and video-mirroring modes.
Chapter 3 Using Your Computer 41
If you want sound to come from the external display, such as a projector or TV, you need to connect an audio cable from the computer’s headphone out port to that device.
Note: Because of the display limitations of most televisions, images displayed on the television screen will be of lower quality than those on the built-in display or an external monitor.

Connecting an External Display or Projector

To connect an external display or projector with a DVI connection to your computer:
1 Turn on the external display or projector.
2 Make sure the display cable is connected to the external projector or display.
3 Connect the display cable to your PowerBook. Your PowerBook automatically detects
the external display.
4 Adjust the resolution on the external display using the Displays pane of System
Preferences or the Displays icon in the menu bar.
To connect an external display or projector with a VGA connection to your computer:
1 Turn on the external display or projector.
2 Make sure the display cable is connected to the external projector or display.
3 Connect the DVI-to-VGA adapter that came with your PowerBook to the VGA connector
of the external display or projector.
4 Connect the DVI-to-VGA adapter to your PowerBook. Your PowerBook automatically
detects the external display.
Important: To ensure that your PowerBook automatically detects the external display
or projector, be sure the DVI-to-VGA adapter is plugged into the external display or projector first.
5 Adjust the resolution on the external display using the Displays pane of System
Preferences or the Displays icon in the menu bar.
42 Chapter 3 Using Your Computer

Using Your PowerBook With the Display Closed

You can use your PowerBook with the display closed if the computer is connected to an external monitor, keyboard, and mouse, and the power adapter is plugged into the PowerBook and an outlet.
Important: To use your PowerBook with the display closed, the power adapter must be
plugged into the PowerBook and an outlet.
To operate your computer with an external monitor attached and the display closed:
1 Connect a USB keyboard and mouse to your PowerBook.
2 Connect the power adapter to the PowerBook and an outlet.
3 Close the PowerBook display to put the computer to sleep.
4 Follow the steps in the previous section to connect your PowerBook to an external
display.
5 Wait a few seconds and then press any key on the external keyboard to wake the
PowerBook.

Connecting a Television, VCR, or Other Video Device

To connect a TV, VCR, or other video device to the PowerBook:
1 Connect an S-video cable to the TV out (Æ) port on your PowerBook (or use the
S-video-to-composite adapter to connect a composite video cable) and connect the other end to your device.
2 If you want to send the sound from your PowerBook to the device, connect a miniplug-
to-RCA cable (not included) from the headphone out (f) port on your PowerBook to the audio input ports on your device.
3 Turn on the external device.
4 To detect the TV or other external device, hold down the Command (x) key and press
the F2 key.
5 To adjust how the images are displayed on the device, use the Displays pane of System
Preferences.

Connecting an Apple Flat-Panel Display

You can connect your PowerBook to an Apple flat-panel display using a DVI-to-ADC adapter, available from your Apple Authorized Reseller, an Apple retail store, or the Apple Store at www.apple.com/store.

For More Information on Using an External Monitor or TV

Additional information on using and configuring an external monitor is available in Mac OS Help. Choose Help > Mac Help from the menu bar and search for “monitor.”
Chapter 3 Using Your Computer 43

Using Your SuperDrive

With your SuperDrive, you can:
Install or use software from CDs or DVDs
Play multimedia on CD discs and music from audio CDs
Write music, documents, and other digital files onto CD-R and CD-RW discs
Play DVD movies and use most DVD discs
Record information on blank DVD-R (recordable DVD) discs
Important: The SuperDrive on your PowerBook supports standard circular 12 cm discs.
Irregularly shaped discs or discs smaller than 12 cm are not supported. Noncircular discs may become lodged in the drive.

Inserting a CD or DVD Disc

To install or use programs from a CD or DVD disc:
1 With the computer turned on, insert the disc (with the label facing up) into the drive
slot until you feel the drive catch the disc and take it the rest of the way in.
The disc may need to be inserted nearly all the way in before the drive takes it in the rest of the way. This is normal.
Note: Some DVD discs are two-sided. To use the second side, you need to flip the disc over.
44 Chapter 3 Using Your Computer
®
2 When the icon for the disc appears on the desktop, the disc is ready to use.

Ejecting a Disc

To eject a disc, do one of the following:
Drag the disc icon to the Trash.
Press and hold the Media Eject ( ) key on the keyboard until the disc ejects.
Allow the disc to fully eject before removing or reinserting it.
If you can’t eject the disc, quit any applications that may be using the disc and try again. If that doesn’t work, restart the computer while holding down the trackpad button.

Playing DVD Discs

To play a DVD-Video disc on your PowerBook, insert the DVD disc. DVD Player opens automatically. You’ll find DVD Player provides easy-to-use controls for starting, stopping, and viewing DVDs.
If your PowerBook is connected to a TV so that you can watch a DVD-Video on the TV screen, select 720 x 480 NTSC (in the United States) or 720 x 576 PAL (in Europe and other regions) in the Displays pane of System Preferences.
You can easily connect your PowerBook to your stereo system. Use a miniplug-to-RCA cable (not included) to connect the headphone out (f) port on your PowerBook to the audio input ports on your stereo.

Recording CD-R and CD-RW Discs

You can record data on CD-R and CD-RW discs.
To record data on a CD-R or CD-RW disc:
1 Insert a blank disc into the optical drive.
2 In the dialog that appears, enter a name for the disc. An icon for the disc appears on
the desktop.
3 Drag files and folders to the disc icon.
4 Click the Burn Disc icon beside the disc name in the Finder Sidebar.
You can also record music on CD-R or CD-RW discs right from your iTunes library.
Chapter 3 Using Your Computer 45
To record music from your iTunes library:
1 Click the iTunes icon in the Dock.
2 Select the playlist you want to record.
3 Insert a blank CD-R or CD-RW disc.
4 At the top of the iTunes window, click Burn CD.
For More Information
For information about how to use iTunes to record music files on a CD-R or CD-RW
disc, open iTunes and see the iTunes onscreen help.
For instructions on using DVD Player, open DVD Player and see the DVD Player
onscreen help.

Recording Information on a DVD

You can record your own digital movies on a blank recordable DVD disc. You can also record other kinds of digital data, such as backing up files onto a recordable DVD disc.
With applications like iDVD, you can create your own customized digital media project, burn it on a blank recordable disc, and play it on most standard DVD players.
To burn an iDVD project onto a blank DVD-R disc:
1 Open iDVD and open your completed iDVD project.
2 Click the Burn button.
3 Insert a blank recordable DVD disc into the drive when prompted.
4 Click the Burn button again.
To record data on DVD-R discs:
1 Insert a blank recordable DVD disc into the drive.
2 In the dialog that appears, enter a name for the disc and select the format you want to
create. An icon for the DVD appears on the desktop.
3 Double-click the DVD icon, then drag files and folders to it.
4 Click the Burn Disc icon beside the disc name in the Finder sidebar.
For more information about how to use iDVD, open iDVD and see the onscreen help.
Important: If your battery runs down when you are burning a DVD, the burn may fail
and the DVD disc will not be able to be used again. To avoid this, always use your power adapter when burning a DVD.
46 Chapter 3 Using Your Computer

Battery

When the external power adapter is not connected, your computer draws power from its battery. Depending on the applications you use and external devices connected to your PowerBook, you may find that the length of time that you can run your PowerBook off one battery charge varies. Turning off certain features such as AirPort Extreme or Bluetooth® wireless technology can help to conserve battery charge. For more information about using your battery, see “Battery-Conservation Tips” on page 49.
You can determine the charge left in your battery by looking at the battery level indicator lights on the battery itself. Press the button next to the lights and the lights glow to show how much charge is left in the battery. The indicator lights remain lit for a few seconds after you press the button. You can check the charge with the battery in or out of your PowerBook.
If your battery runs low while you are working, you can put your PowerBook to sleep and replace the battery with a charged one. The internal backup battery provides enough power to maintain the contents of RAM for up to 3 minutes while you change the battery.
Note: If you have installed additional memory in your PowerBook, the backup battery may provide power for less than three minutes. Also, changing batteries several times in a short period can shorten the length of time the backup battery can maintain data if the backup battery hasn’t had time to fully recharge.
Important: If only one flashing light is on, very little charge is left. If no lights are
visible, the battery is completely drained and the computer will not start up unless the power adapter is connected. Plug in the power adapter to let the battery recharge, or replace the drained battery with a fully charged battery (see page 48).
Battery
Chapter 3 Using Your Computer 47
Battery LEDs
If the battery icon in the Finder menu bar is set to show the percentage of charge, you may sometimes notice that the battery does not maintain a full charge of 100 percent when the power adapter is attached. When the battery level eventually drops below 95 percent, it will charge all the way to 100 percent. This saves battery life as charging is not continuously cycled on and off.

Removing and Replacing the Battery

To remove the battery:
m
Shut down your PowerBook. Turn it over and locate the battery latches. Slide both latches up to unlock the battery, and gently remove it.
To replace the battery:
m
Place one side of the battery into the battery compartment. Gently press the battery down until the battery latch locks into place.
48 Chapter 3 Using Your Computer
Note: Dispose of batteries according to your local environmental laws and guidelines. For more information, see “Battery Disposal Information” on page 96.

Charging a Battery

When the power adapter that came with your computer is connected, the battery recharges whether the computer is off, on, or in sleep. However, the battery recharges more quickly if the computer is off or in sleep. You can monitor the battery charge level using the Battery status icon in the menu bar.
The battery charge level displayed is based on the amount of power left in the battery with the applications, peripheral devices, and system settings (display brightness, Energy Saver settings, and so on) you are currently using. To make more battery power available, close applications and disconnect peripheral devices not in use, and adjust your Energy Saver settings (see the next section).

Battery-Conservation Tips

The amount of work time your PowerBook battery can provide before you need to recharge depends on the applications and peripheral devices you’re currently using and the steps you take to conserve power while you work.
For the best conservation of battery power, do the following:
Disconnect bus-powered USB or FireWire devices when they are not in use.
Turn AirPort off when not in use (use the AirPort status icon in the menu bar).
Turn off Bluetooth wireless module when not in use.
Quit open applications that you are not using.
Remove CD and DVD discs when they are not in use.
Reduce screen brightness using the brightness controls on the PowerBook keyboard.
Set the hard disk to spin down after a short time. In the Energy Saver pane of System
Preferences, select the “Put the hard disk to sleep when possible” option.
Set your PowerBook to sleep after inactivity of five minutes or less.
Chapter 3 Using Your Computer 49
To further save battery power, select the following options in the Energy Saver pane of System Preferences:
Set your computer to modify its processor speed based upon the required amount of
processing activity. Your PowerBook is preset to automatically reduce its processing speed during periods of light processing activity when using battery power, thus reducing power usage. During periods of high processing activity, your computer will automatically switch to a higher processing speed. To check this setting, open the Energy Saver pane of System Preferences and click Show Details to see the settings. To automatically change processor speeds, choose Battery Power from the “Settings for” pop-up menu, click Options, and choose Automatic from the Processor Performance pop-up menu. (To set your computer to use its highest processing speed at all times, choose Highest from Processor Performance pop-up menu.)
To conserve battery life the longest, choose Longest Battery Life from the Optimize
Energy Settings pop-up menu.

For More Information on Your PowerBook Battery

Additional information is available in Mac OS Help. Choose Help > Mac Help from the menu bar and search for “battery.”

Security Slot

You can purchase a security cable lock to protect your PowerBook. With a lock, you can secure your computer to a desk or table.
Security slot
Sample locking device with security cable
50 Chapter 3 Using Your Computer
®

For More Information on Security Options

Additional information on the software security features of your PowerBook, including multiple user passwords and file encryption, is available in Mac OS Help. Choose Help > Mac Help from the menu bar and search for “security” or “multiple users.”
Chapter 3 Using Your Computer 51
4 Adding Memory
to Your Computer
4
This chapter provides information and instructions for installing additional memory in your PowerBook.
Warning: Apple recommends that you have an Apple-certified technician install
memory. Consult the service and support information that came with your computer for instructions on how to contact Apple for service. If you attempt to install memory and damage your equipment, such damage is not covered by the limited warranty on your computer.

Installing Additional Memory

Your computer has two memory slots that you access by removing the memory door in the battery bay. Your PowerBook comes with one 512 megabyte (MB) modules of Double Data Rate (DDR) Synchronous Dynamic Random-Access Memory (SDRAM) installed in one of the two memory slots. Both memory slots can accept any memory module that meets the following specifications:
Small Outline Dual Inline Memory Module (SO-DIMM) format
1.25 inch or smaller
256 or 512 MB or 1 GB (low power)
200-pin
PC 2700 DDR 333 Type RAM
The maximum amount of memory you can install in your PowerBook is 2 GB, using 1 GB DIMMs in both memory slots.
53
To install additional memory:
1 Shut down your computer. Disconnect the power adapter, phone cord, and any other
cables connected to the computer.
2 Turn the computer over and locate the release latches on either side of the battery.
Slide both latches up. The battery should pop up slightly.
Warning: The internal components of your PowerBook may be hot. If you have been
using your PowerBook, wait 10 minutes after shutting it down to let the internal components cool down before continuing.
3 Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the
battery bay of your computer.
54 Chapter 4 Adding Memory to Your Computer
4 Touch a metal surface inside the computer to discharge any static electricity from your
body.
5 If you already have a memory card installed in the slot you wish to use, remove it.
Spread the tabs in the slot away from the notches in the memory card. The card should pop up slightly. Lift the memory card to a 30-degree angle and then gently slide the card out of the memory slot.
Chapter 4 Adding Memory to Your Computer 55
6 Insert the memory card at a 30-degree angle. Line up the notch in the card with the
small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible. Then gently push the memory card into the memory slot. You may feel some resistance.
O
30
7 Gently spread the small tabs in the memory slot away from the notches and push the
memory card down until the two snaps on either side of the card lock into place.
56 Chapter 4 Adding Memory to Your Computer
8 Replace the memory door and make sure it is lying flat before screwing it into place.
9 Replace the battery.
10 Reconnect the power adapter and any other cables.
Chapter 4 Adding Memory to Your Computer 57

Making Sure Your Computer Recognizes the New Memory

After installing additional memory in your PowerBook, check whether the computer recognizes the new memory.
To check the computer’s memory:
1 Start up your computer.
2 When you see the Mac OS desktop, choose Apple (K) > About This Mac from the menu
bar.
A dialog appears that shows the amount of memory in the computer, including any new memory you added. For a more detailed breakdown of the amount of memory installed in your computer, click the More Info button.
If the memory is not recognized or your computer does not start up correctly, shut down your PowerBook and check the instructions again to make sure that the memory you installed is compatible with this PowerBook and that it is installed correctly. If you still have problems, remove the memory and consult the support information that came with the memory or contact the vendor who provided the memory.
58 Chapter 4 Adding Memory to Your Computer

5 Troubleshooting

5
If you have a problem working with your PowerBook, check here first for solutions and advice.
When you experience a problem, there is usually a simple and quick solution. Be aware of the conditions that led up to the problem. Making a note of things you did before the problem occurred will help you narrow down possible causes and then find the answers you need.
Things to note include:
The applications you were using when the problem occurred. Problems that occur
only with a specific application may indicate that the application is not compatible with the version of the Mac OS installed on your computer.
Any software that you recently installed, especially software that added items to the
System folder. (Certain applications install extensions that may not be compatible with the Classic environment.)
Any new hardware, such as additional memory or a peripheral, that you installed.
You can also find more troubleshooting information in Mac OS Help, on the Apple Support website at www.apple.com/support, and in the AppleCare Knowledge Base at kbase.info.apple.com.
59

Problems That Prevent You From Using Your Computer

If the computer won’t respond or the pointer won’t move
Press Command (x)-Option-Esc to force a frozen application to quit. If a dialog
appears, select the application you would like to quit and click Force Quit.
If you are working in Classic, hold down the Option and Command (x) keys and then press the Esc key.
Next, save your work in any open applications and restart the computer to be sure the problem is entirely cleared up.
If you are unable to force the application to quit, press and hold the Power button
(®) for a few seconds to shut down the computer.
If the computer still doesn’t respond, try to restart it by simultaneously pressing the
Command (x) and Control keys on your keyboard and the Power button (®).
If the problem occurs frequently, choose Help > Mac Help from the menu bar at the top of the screen. Search for the word “freeze” to see help for instances when the computer freezes or doesn’t respond.
If the problem occurs only when you use a particular program, check with the program’s manufacturer to see if it is compatible with your computer. If you know an application is compatible, you may need to reinstall your computer’s system software or, if you’re using Classic, you may need to check for incompatible system extensions. See the next topic for instructions.
If the computer freezes during startup or you see a flashing question mark
Try using Disk Utility to repair your hard disk.
1 Insert the first software install and restore disc into your computer. Then restart your
computer and hold down the C key as it starts up.
2 Choose Installer > Open Disk Utility. When Disk Utility opens, follow the instructions in
the First Aid pane to see if the utility can repair your disk.
If using Disk Utility doesn’t work, you may need to reinstall your computer’s system software. For instructions, see page 63.
If you are using the Classic environment in Mac OS X, you might have an incompatible extension. (Mac OS X does not use system extensions.)
Try turning off your system extensions to see if that solves the problem. To turn off extensions in Classic, open System Preferences, click Classic, click the Advanced tab, and choose Turn Off Extensions from the pop-up menu. Click Restart Classic.
If turning off extensions appears to solve the problem, you may need to identify and eliminate or reinstall the extension that is causing the problem. Open the Extensions Manager control panel and turn off the extensions you suspect are causing the problem. Then restart Classic with the extensions turned on again.
60 Chapter 5 Troubleshooting
If the computer won’t turn on or start up
Make sure the power adapter is plugged into the computer and into a functioning
power outlet. Be sure to use the power adapter that came with your computer.
Check if your battery needs to be recharged. Press the small button on the battery.
You should see one to four lights indicating the battery’s level of charge. If only one battery level indicator light is flashing, allow the power adapter to charge the battery until at least one indicator light is glowing continuously.
If that does not work, press the Power button (®) and immediately hold down the
Command (x), Option, P, and R keys until you hear the startup sound a second time.
If you recently installed additional memory, make sure that it is correctly installed
and that it is compatible with your computer. See whether removing it allows the computer to start up (see page 53).
If you are still unable to start up your computer, see the service and support
information that came with your PowerBook for information on contacting Apple for service.
If the display suddenly goes black or your system freezes
Try restarting your system.
1 Unplug any devices that are connected to your PowerBook except the power adapter.
2 Hold down the Command (x) and Control keys and press the Power button (®) to
restart the system.
3 Let the battery charge to at least 10 percent before plugging in any external devices
and resuming your work.
To see how much the battery has recharged, look at the Battery status icon in the menu bar.

Other Problems

If you forgot your password
1 Insert the first software install and restore disc into your computer. Then restart your
computer and hold down the C key as it starts up.
2 Choose Installer > Reset Password from the menu bar. Follow the instructions on the
screen.
If you have a problem with an application
For problems with software from a manufacturer other than Apple, contact the
manufacturer. Software manufacturers often provide software updates on their websites.
You can configure your PowerBook to automatically check for and install the latest
Apple software using the Software Update pane of System Preferences. For more information, choose Help > Mac Help from the menu bar and search for “Software Update.”
Chapter 5 Troubleshooting 61
If you have trouble using AirPort Extreme wireless communication
Make sure you have properly configured the software according to the instructions
that came with your AirPort Extreme Card or base station.
Make sure the computer or network you are trying to connect to is running and has
a wireless access point.
Make sure you are within antenna range of the other computer or the network’s
access point by checking the AirPort Extreme signal level. Check the AirPort status icon in the menu bar. Up to four bars appear to show signal strength.
Nearby electronic devices or metal structures can interfere with wireless communication and reduce this range. Repositioning or rotating the computer may improve reception.
See AirPort Help (choose Help > Mac Help, then choose Library > AirPort Help from
the menu bar) and the instructions that came with the wireless device for more information.
If you have trouble ejecting a disc
m
Quit any applications that may be using the disc and try again. If that doesn’t work, restart the computer while holding down the trackpad button.
If you suspect a problem with your computer hardware
m
You can use the Apple Hardware Test application to help determine if there is a problem with one of your computer’s components, such as the memory or processor.
Apple Hardware Test is on the first software install and restore disc.
To use Apple Hardware Test:
1 Disconnect all external devices from your computer. If you have an Ethernet cable
connected, disconnect it.
2 Start up your computer using Apple Hardware Test. Insert the first software install and
restore disc into your computer. Then restart your computer and hold down the Option key as it starts up.
A list of available startup volumes appears. Click Apple Hardware Test and click the right arrow.
3 When the Apple Hardware Test main screen appears, follow the onscreen instructions.
4 If Apple Hardware Test detects a problem, it displays an error code. Make a note of the
error code before pursuing other support options. If Apple Hardware Test does not detect a hardware failure, the problem may be software-related.
For more information about Apple Hardware Test, see the Apple Hardware Test Read Me file on the first software install and restore disc.
If you have problems with your Internet connection
Make sure your telephone line or network cable is connected and functioning properly.
62 Chapter 5 Troubleshooting
If you are using a dial-up Internet connection, make sure that your telephone cord is
plugged into the modem port (marked with the W icon) and not the Ethernet port (marked with the G icon) on the computer.
Open the Network pane of System Preferences and verify the information entered
there with your Internet service provider (ISP) or network administrator.
If you have a problem using your computer or working with the Mac OS
If the answers to your questions are not in this manual, look in Mac OS Help for
instructions and troubleshooting information.
Check the Apple Support website at www.apple.com/support for the latest
troubleshooting information and software updates.

Restoring Your Computer’s Software

Use the software install and restore discs that came with your computer to install Mac OS X, applications, and Classic support.
To install Mac OS X:
1 Back up essential files, if possible.
2 Insert the first software install and restore disc that came with your computer.
3 Double-click the “Install Mac OS X” icon.
4 Follow the onscreen instructions.
Note: If you’re experiencing problems and the computer won’t start up, try using FireWire Target Disk Mode to transfer files to another computer (see page 35). Then restart the computer by inserting the first software install and restore disc into the optical drive and restarting the computer.
To install applications and Classic support:
1 Back up essential files, if possible.
2 Insert the first software install and restore disc that came with your computer.
3 Double-click the “Install Applications and Classic Support” icon.
4 Follow the onscreen instructions.
Note: iCal, iChat, iMovie, iPhoto, iSync, iTunes, and Safari are part of Mac OS X. To install them you must follow the instructions for installing Mac OS X.

Locating Your Product Serial Number

You can see your computer’s serial number by choosing About This Mac from the Apple (K) menu and then clicking the More Info button, or by opening System Profiler (in Applications/Utilities) and clicking Hardware. The serial number for your PowerBook is also located in the battery bay.
Chapter 5 Troubleshooting 63

A Specifications

Click the triangles in the
window to show and
hide information in the
different categories.
A
You can use System Profiler to find out detailed information about your PowerBook, such as the amount of built-in memory, hard disk size, devices connected, and the product serial number.
To access the information in System Profiler, choose Apple (K) > About This Mac from the menu bar and then click More Info, or open System Profiler, located in Applications/Utilities.
Appendix
Operating Environment
Operating temperature: 50° F to 95° F (10° C to 35° C)
Altitude: 3048 m (10,000 ft.) maximum
Relative humidity: 20% to 80% noncondensing
Power Adapter
Input: AC 100–240 volts (V), 50/60 hertz (Hz)
Output: DC 24.5 V, 2.65 A
65
Battery
Output: DC 10.8 V
Capacity: 58 WHr
Additional information is available on the Internet at www.apple.com/powerbook and www.apple.com/support.
66 Appendix A Specifications

B Safety, Use, and Care Information

B
Read this important PowerBook safety and maintenance information.

Safety Instructions for Setting Up and Using Your Computer

Plugging In the Power Adapter

Always leave space around your power adapter. Do not use this equipment in a location where airflow around the power adapter or computer is confined. Always disconnect the power adapter and remove the battery before opening the computer to perform procedures such as installing memory or removing the hard disk.
Warning: Use only the power adapter that came with your PowerBook computer.
Adapters for other electronic devices (including other PowerBook models and other portable computers) may look similar, but they may affect your computer’s performance or damage it.
Appendix

Connecting a Phone Line to the Internal Modem

Always disconnect the phone cord before opening the computer to perform procedures such as installing memory or removing the hard disk.
Warning: Do not connect a digital telephone line to the modem, because the wrong
type of line could damage the modem.

Connectors and Ports

Never force a connector into a port. If the connector and port don’t join with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
67

Using Your PowerBook

When using your PowerBook or when charging the battery, it is normal for the bottom of the case to get warm. For prolonged use, place your PowerBook on a flat, stable surface. The bottom of the PowerBook case functions as a cooling surface that transfers heat from inside the computer to the cooler air outside. The bottom of the case is raised slightly to allow airflow that keeps the unit within normal operating temperatures. In addition, the computer vents warm air from the back of the case.
Warning: Do not place your PowerBook on a pillow or other soft material when it is
on, as the material may block the airflow vents, in particular the rear vents, and cause the computer to overheat. Never place anything over your keyboard before closing the display. This can cause your computer to cycle on and off which may create excessive heat and drain your battery. Never turn on your computer unless all of its internal and external parts are in place. Operating the computer when it is open or missing parts can be dangerous and can damage your computer.

Carrying Your PowerBook

If you carry your PowerBook in a bag or briefcase, make sure that there are no loose items (such as paper clips or coins) that could accidentally get inside the computer through an opening such as the optical drive slot.

Storing Your PowerBook

If you are going to store your PowerBook for an extended period of time, do one of the following to prevent your PowerBook battery from becoming completely depleted:
Keep the power adapter connected.
Fully charge your PowerBook battery before storing the computer.
Fully charge and then remove your PowerBook battery when storing your computer
(especially important when storing your computer for longer than 5 months).

Cleaning Your PowerBook

Follow these general rules when cleaning the outside of your computer and its components:
Shut down your PowerBook and remove the battery.
Use a damp, soft, lint-free cloth to clean the computer’s exterior. Avoid getting
moisture in any openings. Do not spray liquid directly on the computer.
Don’t use aerosol sprays, solvents, or abrasives.
68 Appendix B Safety, Use, and Care Information

Cleaning Your PowerBook Display

To clean your PowerBook screen, do the following:
Shut down your PowerBook and remove the battery.
Dampen a clean, soft, lint-free cloth or paper with water only and wipe the screen.
Do not spray liquid directly on the screen.

General Safety Instructions

For your own safety and that of your equipment, always take the following precautions.
Disconnect the power plug (by pulling the plug, not the cord), remove the main battery, and disconnect the phone cord if any of the following conditions exists:
You want to remove any parts.
The power cord or plug becomes frayed or otherwise damaged.
You spill something into the case.
Your computer is exposed to rain or any other excess moisture.
Your computer has been dropped or the case has been otherwise damaged.
You suspect that your computer needs service or repair.
You want to clean the case (use only the recommended procedure described earlier).
Important: The only way to disconnect power completely is to unplug the power cord
and phone cord, and remove the battery. Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when you need to.
Warning: Your AC cord came equipped with a three-wire grounding plug (a plug that
has a third grounding pin). This plug will fit only a grounded AC outlet. If you are unable to insert the plug into an outlet because the outlet is not grounded, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose of the grounding plug.
Be sure that you always do the following:
Keep your computer away from sources of liquids, such as drinks, washbasins,
bathtubs, shower stalls, and so on.
Protect your computer from dampness or wet weather, such as rain, snow, and so on.
Read all the installation instructions carefully before you plug your computer into a
wall socket.
Keep these instructions handy for reference by you and others.
Follow all instructions and warnings dealing with your system.
Appendix B Safety, Use, and Care Information 69
Important: Electrical equipment may be hazardous if misused. Operation of this
product, or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables.
Warning: Never push objects of any kind into this product through the openings in
the case. Doing so may be dangerous and may result in fire or electric shock.

Battery

Warning: There is a risk of explosion if the battery is replaced by an incorrect battery
type. Dispose of used batteries according to your local environmental guidelines. Don’t puncture or incinerate the battery.

Avoid Hearing Damage

Warning: Permanent hearing loss may occur if earbuds or headphones are used at
high volume. You can adapt over time to a higher volume of sound, which may sound normal but can be damaging to your hearing. Set your PowerBook volume to a safe level before that happens. If you experience ringing in your ears, reduce the volume or discontinue use of earbuds or headphones with your PowerBook.

Apple and the Environment

Apple Computer recognizes its responsibility to minimize the environmental impacts of its operations and products.
For More Information
Go to www.apple.com/about/environment.
70 Appendix B Safety, Use, and Care Information

Ergonomics

Here are some tips for setting up a healthy work environment.
Keyboard and Trackpad
When you use the keyboard and trackpad, your shoulders should be relaxed. Your upper arm and forearm should form an angle that is slightly greater than a right angle, with your wrist and hand in roughly a straight line.
This
Not this
Use a light touch when typing or using the trackpad and keep your hands and fingers relaxed. Avoid rolling your thumbs under your palms.
This
Not this
Change hand positions often to avoid fatigue. Some computer users may develop discomfort in their hands, wrists, or arms after intensive work without breaks. If you begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a qualified health specialist.
Appendix B Safety, Use, and Care Information 71
Chair
An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet flat on the floor. The back of the chair should support your lower back (lumbar region). Follow the manufacturer’s instructions for adjusting the backrest to fit your body properly.
You may have to raise your chair so your forearms and hands are at the proper angle to the keyboard. If this makes it impossible to rest your feet flat on the floor, you can use a footrest with adjustable height and tilt to make up for any gap between the floor and your feet. Or you may lower the desktop to eliminate the need for a footrest. Another option is to use a desk with a keyboard tray that’s lower than the regular work surface.
External Mouse
If you use an external mouse, position the mouse at the same height as your keyboard and within a comfortable reach.
Built-in Display
Adjust the angle of the display to minimize glare and reflections from overhead lights and windows. Do not force the display if you meet resistance. The display is not meant to open past 140 degrees.
You can adjust the brightness of the screen when you take the computer from one work location to another, or if the lighting in your work area changes.
For More Information
Go to www.apple.com/about/ergonomics.
72 Appendix B Safety, Use, and Care Information

C Connecting to the Internet

C
You can use your computer to browse the World Wide Web, send email to friends and family, and chat in real time over the Internet. Use this detailed guide to connect to the Internet.
When you first start up Mac OS X, Setup Assistant helps you enter your Internet configuration information and sign up for an Internet service provider (ISP) if you don’t already have one.
If you didn’t use Setup Assistant to configure your Internet connection, you can use it now. Open System Preferences and click Network. Click the “Assist me” button to open Network Setup Assistant. If you don’t want to use Network Setup Assistant, you can use the information in this appendix to set up your connection manually.
There are four kinds of Internet connections:
Dial-up connection: Your computer is plugged into a telephone wall jack using a
telephone cable.
High-speed DSL or cable modem connection: Your computer is plugged into a
special modem you get from an ISP using an Ethernet cable.
AirPort Extreme wireless connection: Your computer is connected wirelessly to the
Internet using an AirPort Extreme Base Station.
Local area network (LAN): Your computer is plugged into a LAN using an Ethernet
cable. This type of connection is usually used in the workplace.
Appendix
73
Before you connect to the Internet:
1 Set up an account with an ISP. If you do not have an ISP account, Setup Assistant can
help you get one. If you don’t want to use the ISP suggested by Setup Assistant, you can find an ISP in your phone directory. Look under “Internet access,” “Internet service,” or “online.”
Note: If you want to use America Online as your ISP, skip the Internet setup part of Setup Assistant.
2 Gather the connection information you need from your ISP or network administrator.
See the next section, “Gathering the Information You Need,” to find out what information to get for each type of connection.
If another computer in the same location is already connected to the Internet, you may be able to use its settings.
To find the settings on a Mac OS X computer:
Open the Network pane of System Preferences.
Choose your connection method from the Show pop-up menu.
Copy the information for your configuration.
To find the settings on a Mac OS 9 computer:
Open the TCP/IP control panel.
Find the connection method in the “Connect via” pop-up menu.
Find the configuration in the Configure pop-up menu.
Copy the IP address, subnet mask, and router address from the
corresponding fields.
To find the settings on a Windows PC:
The connection information on a Windows computer resides in two places.
To find the IP address and subnet mask, open the “Network and Internet
Connections” control panel.
To find user account information, open the User Accounts control panel.
You can write the information directly on the next few pages, then enter it in Setup Assistant.
3 If you are using a dial-up modem, plug the phone cord (included with most Macintosh
computers) into your computer’s modem port and into a phone wall jack. If you are using a DSL or cable modem, follow the instructions that came with the modem to connect it to your computer.
74 Appendix C Connecting to the Internet

Gathering the Information You Need

You can write the information you get from your Internet service provider (ISP), your network administrator, or your other computer on these pages, then enter it in Network Setup Assistant.
To set up a telephone dial-up connection, gather the following information:
Service provider name
User or account name
Password
ISP phone number
Alternate phone number
Dialing prefix to obtain an outside line
To set up a DSL, cable modem, LAN, or AirPort Extreme wireless connection:
m
First, choose your connection method (ask your system administrator or your ISP, if you don’t know):
Manually
Using DHCP with a manual address
Using DHCP
Using BootP
PPP
If you’re unsure which method to use, “Using DHCP” may be a good choice, because the network supplies most of the required information for you automatically.
If you selected “Manually” or “Using DHCP with a manual address,” gather the following:
IP address
Subnet mask
Router address
Note: If you selected “Using DHCP with a manual address,” you don’t need a subnet mask or router address.
If you selected “Using DHCP,” gather the following optional information (ask your ISP if you need it):
DHCP client ID
DNS servers
Appendix C Connecting to the Internet 75
If you selected “PPP” (for PPPoE connections), gather the following:
Service provider
Account name
Password
PPPoE service name
The information below is optional. Ask your ISP or system administrator if you need it.
DNS servers
Domain name
Proxy server

Entering Your Information

After gathering your specific setup information from your ISP or network administrator, you can click the “Assist me” button in the Network preferences pane to open Network Setup Assistant, or you can enter the information manually.
To enter your information manually, follow the steps that correspond to your connection method.
Dial-up modem with Point-to-Point Protocol (PPP) connection (see page 77)
Cable modem, DSL, or LAN connection using these configurations:
Manual (see page 81)
DHCP (see page 82)
PPPoE (see page 83)
AirPort Extreme wireless connection (see page 85)
76 Appendix C Connecting to the Internet

Dial-Up Modem With Point-to-Point Protocol (PPP) Connections

A dial-up modem is the most common way to connect to the Internet. Your modem uses a method called Point-to-Point Protocol (PPP) to connect to an ISP.
Make sure your modem is plugged into a phone line and you have the information from your ISP available (see page 75).
To set up Network preferences to connect using the internal modem port:
1 Choose Apple (K) > System Preferences from the menu bar.
2 Click Network.
3 Choose Network Port Configurations from the Show pop-up menu and select the On
checkbox next to Internal Modem.
4 Drag Internal Modem to the top of the Port Configurations list to make it the preferred,
or primary, network interface.
Appendix C Connecting to the Internet 77
5 Choose Internal Modem from the Show pop-up menu and click PPP.
6 Enter the information from your ISP and click Apply Now.
To test your Internet configuration:
1 Open the Internet Connect application (in the Applications folder).
2 Click the Internal Modem icon, if necessary.
3 Enter your dial-up telephone number, account name, and password, if necessary.
4 Click Connect.
Internet Connect dials your ISP and establishes a connection.
78 Appendix C Connecting to the Internet
To connect automatically when you start a TCP/IP application, such as a web browser or email:
1 Click PPP Options (in the PPP pane of Network preferences).
2 Select the “Connect automatically when needed” checkbox.
3 Click OK and Apply Now.

DSL, Cable Modem, or LAN Internet Connections

If you connect to the Internet using a DSL or cable modem or Ethernet LAN, ask your ISP or network administrator how you should configure your Internet connection:
Manually. With a manual configuration, your ISP or network administrator provides a
static IP address and other information that you enter in Network preferences.
Using Dynamic Host Configuration Protocol (DHCP). With a DHCP configuration, the
DHCP server automatically enters the information for you.
Using Point-to-Point Protocol over Ethernet (PPPoE). If you use a DSL modem and
need a user name and password to connect to the Internet, you may need to configure your network to use PPPoE.
Make sure you have the information from your ISP available as you configure your network (see page 75).
Appendix C Connecting to the Internet 79
To set up Network preferences for the built-in Ethernet port:
1 Choose Apple (K) > System Preferences from the menu bar.
2 Click Network.
3 Choose Network Port Configurations from the Show pop-up menu.
4 Select the On checkbox next to Built-in Ethernet.
5 Drag Built-in Ethernet to the top of the Port Configurations list to make it the preferred,
or primary, network interface.
Next, follow the instructions to configure your network manually, using DHCP, or using PPPoE, as instructed by your ISP or network administrator.
80 Appendix C Connecting to the Internet

Manual Configuration

Have your static IP address, router address, and subnet mask from your ISP ready (see page 75).
To set up a manual configuration:
1 In Network preferences, choose Built-in Ethernet from the Show pop-up menu.
2 Click TCP/IP, if necessary.
3 In the Configure IPv4 pop-up menu, choose Manually.
4 Type the information into the corresponding fields.
5 Click Apply Now.
Once you configure your network, your connection is ready. Open your web browser (or another TCP/IP application) to test your Internet connection.
Appendix C Connecting to the Internet 81

DHCP Configuration

After you set up a DHCP configuration, the DHCP server automatically provides your network information.
To set up a DHCP configuration:
1 In Network preferences, choose Built-in Ethernet from the Show pop-up menu.
2 Click TCP/IP, if necessary.
3 Choose Using DHCP from the Configure IPv4 pop-up menu.
4 Click Apply Now.
Open your web browser (or another TCP/IP application) to test your Internet connection.
Note: Unless your ISP instructs you to do otherwise, ignore the DHCP Client ID field and the Search Domains field.
82 Appendix C Connecting to the Internet

PPPoE Configuration

Some DSL-based ISPs use Point-to-Point Protocol over Ethernet (PPPoE). If you use a DSL modem and need a user name and password to connect to the Internet, check with your ISP to determine if you should connect using PPPoE.
To set up a PPPoE connection:
Have your user name, password, and if required, the domain name server (DNS) address from your ISP available (see page 75).
1 In Network preferences, choose Built-in Ethernet from the Show pop-up menu.
2 Click PPPoE and select “Connect using PPPoE.”
3 Type the information into the corresponding fields. If you want all users of your
computer to use the same connection method, select “Save password.”
Note: To connect automatically when you start a TCP/IP application, such as a web browser or email, click PPPoE Options, then select “Connect automatically when needed.”
Appendix C Connecting to the Internet 83
4 Click TCP/IP and choose either Using PPP or Manually from the Configure IPv4 pop-up
menu, as instructed by your ISP. If you have a static IP address from your ISP, choose Manually and type the address in the IP Address field.
5 Type the domain name server (DNS) addresses in the DNS Servers field.
6 Click Apply Now.
Once you configure your network, your Internet connection is ready. You can open your web browser or other TCP/IP application to test your connection.
Important: If you did not select the option to connect automatically, you will need to
open the Internet Connect application, choose the correct configuration, and then click Connect. For more information, choose Help > Internet Connect Help from the menu bar at the top of the display.
84 Appendix C Connecting to the Internet

AirPort Extreme Wireless Connection

You can configure your AirPort Extreme network and Internet connection using AirPort Setup Assistant, located in the Utilities folder within your Applications folder. The assistant helps you configure the AirPort Extreme Base Station and set up your computer to use AirPort Extreme. For more information about your AirPort Extreme Base Station, see the AirPort Extreme Base Station Setup Guide that came with your base station.
If your AirPort Extreme Base Station is already configured, in most cases your AirPort Extreme Card is ready to access it immediately.
To check if you have access to an AirPort Extreme network:
m
Click the AirPort status icon in the menu bar and choose an AirPort network listed there.
If you don’t see an AirPort network listed, you can use AirPort Setup Assistant to check or change your settings, or you can change them using the Network pane of System Preferences.

Setting Up an AirPort Extreme Connection Manually

Gather the following information from your system administrator if you’ll be setting up a manual connection, which uses specific preassigned addresses for your servers and computer.
If you’ll be connecting using DHCP, most of this information is provided to your computer automatically by the network, so ask your system administrator what is required.
Domain name server (DNS) addresses, if necessary
DHCP or manual IP address configuration
IP address
Router address
Subnet mask
Password, if required
Appendix C Connecting to the Internet 85
Next, make sure your AirPort connection options are active in Network preferences.
To set up Network preferences for an AirPort Extreme connection:
1 Choose Apple (K) > System Preferences from the menu bar.
2 Click Network.
3 Choose Network Port Configurations from the Show pop-up menu.
4 Select the On checkbox next to AirPort.
Next, follow the instructions to configure your network either manually or using DHCP, as instructed by your ISP or network administrator. If you’re setting up your network yourself, it may be easier to configure the network using DHCP, because the server assigns IP addresses automatically.
86 Appendix C Connecting to the Internet
5 Choose AirPort from the Show pop-up menu.
6 Click TCP/IP, if necessary.
7 In the Configure IPv4 pop-up menu, choose either Manually or Using DHCP.
If you chose Manually, type the other information into the corresponding fields.
If you chose Using DHCP, you don’t need to enter any further information unless your
system administrator has instructed you to do so.
8 Click AirPort and select options for joining an AirPort Extreme network after restarting
or when your computer wakes from sleep.
9 Click Apply Now.
Once you configure your AirPort settings, you are ready to connect.
To test your AirPort Extreme connection:
m
Click the AirPort status icon in the menu bar and choose Turn AirPort On.
Any AirPort Extreme network in range should appear in the menu.
Appendix C Connecting to the Internet 87

Troubleshooting Your Connection

Cable Modem, DSL, and LAN Internet Connections

If you can’t connect to the Internet using your cable modem, DSL, or local area network (LAN), see the following steps.
Important: Instructions that refer to modems do not apply to LAN users. LAN users
may have hubs, switches, routers, or connection pods that cable and DSL modem users do not. LAN users should contact their network administrator rather than an ISP.
Check the cables and power supplies
Make sure all modem cables are firmly plugged in, including the modem power cord, the cable from the modem to the computer, and the cable from the modem to the wall jack. Check the cables and power supplies to Ethernet hubs and routers.
Turn the modem off and on and reset the modem hardware
Cycle the power on your DSL or cable modem by turning it off for a few minutes and then turning it back on. Some ISPs recommend that you unplug the modem’s power cord. If your modem has a reset button, you can press it either before or after cycling the power.

PPPoE Connections

If you are unable to connect to your ISP using PPPoE, first check the cables and power supplies, then turn the modem off and on again and reset the modem hardware.
Check System Preferences settings
1 Choose Apple (K) > System Preferences from the menu bar.
2 Click Network.
3 Choose Network Port Configurations from the Show pop-up menu.
4 Drag Built-in Ethernet to the top of the Port Configurations list.
5 Choose Built-in Ethernet from the Show pop-up menu.
6 Click PPPoE.
7 Select “Connect using PPPoE.”
8 Check the Account Name field to be sure you have entered the correct information
from your ISP.
9 If you chose to save your password, retype it to make sure it is correct.
10 Click TCP/IP. Make sure you’ve entered the correct information from your ISP
in this pane.
11 Click Apply Now.
88 Appendix C Connecting to the Internet

Network Connections

If you have two or more computers attempting to share an Internet connection, be sure that your network is set up properly. You need to know if your ISP provides only one IP address or if it provides multiple IP addresses, one for each computer.
If only one IP address is used, then you must have a router capable of sharing the connection, also known as network address translation (NAT) or “IP masquerading.” For setup information, check the documentation provided with your router or ask the person who set up your network. The AirPort Extreme Base Station may be used to share one IP address among multiple computers. For information on using the AirPort Extreme Base Station, check the onscreen help or visit the Apple AirPort website at www.apple.com/airport.
If you cannot resolve the issue using these steps, contact your ISP.
Appendix C Connecting to the Internet 89

D Top Ten Questions

D
Do you have a question? Here are the top ten questions commonly asked by new PowerBook users.
My Internet connection doesn’t seem to be working. How do I set it up?
There are different types of Internet connections. For example, you can connect via a modem, a DSL connection, a wireless AirPort connection, or an Ethernet network. You will need to supply Mac OS X with specific information about your connection type, Internet service provider, or network. The first step in configuring your connection is gathering the information needed for your connection type. To find out what information you need and for instructions on how to configure your connection type, see Appendix C, “Connecting to the Internet,” on page 73. Your computer also has a Setup Assistant application to help walk you through setting up an Internet connection. Open System Preferences and click Network. Click the “Assist me” button to open Network Setup Assistant.
Appendix
How do I set up my printer? Is it compatible with my PowerBook?
Begin by connecting your printer and installing any software according to the instructions that came with your printer. Next, open System Preferences and click the Print & Fax icon. Use the Print & Fax pane to configure your PowerBook to access the printer. You’ll find lots of information about setting up printers in Mac OS Help (search for “Printer”). Also see “Connecting to a Printer” on page 25 of this manual.
If your printer doesn’t seem to be working as expected, you may need to check the manufacturer’s website for updated print drivers. Often the latest printer software is available for downloading.
If you sent a print job to your printer, but it’s not printing, check to see if the job is stopped or on hold by clicking the printer icon in the Dock. (If no icon appears in the Dock, open the Printer Setup Utility in the Applications/Utilities folder and double-click the printer’s name.) If the window for the printer says “Job Stopped,” click the Start Jobs button. If “Hold” appears beside the job name, resume printing by clicking the job name and clicking Resume. If a print job has stopped printing because of a technical error, you can delete the faulty job by selecting the job and clicking Delete. You can then try printing the job again.
91
How does the Mac OS X interface work?
Users new to Mac OS X often have questions about how to carry out certain tasks. Your best source for Mac OS X information is Mac OS Help. You’ll find introductory explanations for new users, users switching from Windows computers, and users upgrading from Mac OS 9. Open Mac OS Help by choosing Help > Mac Help from the Finder menu bar at the top of your screen, and browse the new user information listed there. Many of the basic tasks users are interested in involve the Finder, so try searching on “Finder,” too.
How do I make my PowerBook battery last longer?
You can conserve battery power by using the Energy Saver preference pane to specify how quickly the computer should go to sleep or dim the display. Open System Preferences and click the Energy Saver icon. Choose settings that are optimized for your type of usage. Using peripheral devices, such as hard disk drives, that get power from your computer can also shorten the amount of time your battery lasts. You can conserve battery power by disconnecting such devices. You can also purchase an additional battery that you can switch into your computer when power gets low. For more information about conserving battery power, see “Battery-Conservation Tips” on page 49.
I put a disc in my optical drive, but nothing happened. How do I know if the disc is compatible with my optical drive?
Press the Media Eject ( ) key to eject the disc. Apple slot-loading optical drives support only round 12 cm discs. Nonstandard discs with noncircular shapes do not work in the optical drive. For more information about nonstandard discs, check the AppleCare Knowledge Base at www.apple.com/support.
Warning: Inserting a nonstandard disc into the optical drive may damage the drive.
How do I connect a monitor or TV to my PowerBook?
Your PowerBook comes with an external monitor port and adapters for connecting many commonly used monitors, TVs, and video displays. If your device has a connector that is different from the external monitor port on your PowerBook, you need to attach an adapter to connect it to the port. To see the adapters included with your PowerBook, see page 5. For more information about connecting displays and other devices, see “External Video Support (DVI, VGA, and S-Video)” on page 41.
I forgot my password. How do I reset it?
To reset your password, start up from the software install and restore disc that came with your computer. Once the Installer program opens, choose Installer > Reset Password from the menu bar. Follow the instructions on the screen.
92 Appendix D Top Ten Questions
I hear a fan coming on and my PowerBook seems to get quite warm. Is that OK?
As your PowerBook operates, it’s designed to keep itself within safe thermal limits. The fan comes on and stays on to keep the PowerBook operating at normal temperatures. The bottom of your PowerBook may become warm because it’s designed to let heat dissipate through the case. This is normal. For more information, see “Using Your PowerBook” on page 68.
My application or Mac OS X doesn’t seem to be working correctly. Do I need to reinstall Mac OS X?
The process of troubleshooting a problem requires that you determine a number of things, such as whether a problem always happens with a specific application, is related to your operating system, or is due to faulty hardware. Before you reinstall, see “Troubleshooting” on page 59 to help analyze the problem. Apple also provides many technical explanations and advice for solving problems in the AppleCare Knowledge Base. To access the Knowledge Base on the web, go to www.apple.com/support. If you determine that you must reinstall Mac OS X, you’ll find instructions in “Restoring Your Computer’s Software” on page 63.
I installed an application on my PowerBook, but it doesn’t seem to be working. Where can I go for help?
Check the documentation that came with the application or the manufacturer’s website for instructions on how to get support. Often manufacturers are aware of common problems that might occur with their applications and provide solutions and updates for immediate use. If your program is not an Apple product, you’ll need to contact the manufacturer directly for the best support.
Appendix D Top Ten Questions 93
Communications Regulation Information
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Radio and Television Interference
This computer equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly—that is, in strict accordance with Apple’s instructions—it may cause interference with radio and television reception.
This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.
You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices.
If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures:
Turn the television or radio antenna until the interference stops.
Move the computer to one side or the other of the television or radio.
Move the computer farther away from the television or radio.
Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.)
If necessary, consult an Apple-authorized service provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions.
Important: Changes or modifications to this product not authorized by Apple Computer, Inc., could void the EMC compliance and negate your authority to operate the product.
This product was tested for EMC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance.
Responsible party (contact for FCC matters only): Apple Computer, Inc. Product Compliance,
1 Infinite Loop M/S 26-A, Cupertino, CA 95014-2084, 408-974-2000.
Industry Canada Statement
Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
VCCI Class B Statement
European Community
Complies with European Directives 72/23/EEC, 89/336/EEC, and 99/5/EEC.
95
Laser Information
Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous radiation exposure.
Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to the eyes. The use of optical instruments, such as magnifying lenses, with this product increases the potential hazard to your eyes. For your safety, have this equipment serviced only by an Apple-authorized service provider.
If you have an internal Apple CD-ROM, DVD-ROM, or DVD-RAM drive in your computer, your computer is a Class 1 laser product. The Class 1 label, located in a user-accessible area, indicates that the drive meets minimum safety requirements. A service warning label is located in a service-accessible area. The labels on your product may differ slightly from the ones shown here.
Class 1 label Service warning label
Exposure to Radio Frequency Energy
The radiated output power of the optional AirPort Extreme Card is far below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized.
Mouse and Keyboard Information
The Apple optical mouse is a Class 1 LED product. This product complies with the requirements of European Directives 72/23/EEC and 89/336/EEC.
It also complies with the Canadian ICES-003 Class B Specification.
High-Risk Activities Warning
This computer system is not intended for use in the operation of nuclear facilities, aircraft navigation or communications systems, or air traffic control machines, or for any other uses where the failure of the computer system could lead to death, personal injury or severe environmental damage.
ENERGY STAR® Compliance
As an ENERGY STAR® partner, Apple has determined that standard configurations of this product meet the ENERGY STAR® guidelines for energy efficiency. The ENERGY STAR® program is a partnership with office product equipment manufacturers to promote energy-efficiency. Reducing energy consumption of office products saves money and reduces pollution by eliminating wasted energy.
Battery Disposal Information
Dispose of batteries according to your local environmental laws and guidelines.
Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd.
Telephone and Apple 56K Modem Information
Notify Your Telephone Company
Some telephone companies require that you notify the local business office when you hook up a modem to their lines.
Information You Need in the United States
The internal modem complies with Part 6B of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN). If requested, provide this information to your telephone company.
Ringer equivalence number (REN): 0.6B The REN is useful to determine the quantity of devices you may connect to your telephone lines and still have all those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area.
Telephone jack type: USOC, RJ-11 An FCC-compliant telephone cord and modular plug are provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that complies with Part 68 rules. See the installation instructions for details.
96
Telephone Line Problems
If your telephone doesn’t work, there may be a problem with your telephone line. Disconnect the modem to see if the problem goes away. If it doesn’t, report the problem either to your local telephone company or to your company’s telecommunications people.
If disconnecting the modem eliminates the problem, the modem itself may need service. See the service and support information that came with your Apple product for instructions on how to contact Apple or an Apple-authorized service provider for assistance.
If you do not disconnect your modem when it is adversely affecting the telephone line, the telephone company has the right to disconnect your service temporarily until you correct the problem. The telephone company will notify you as soon as possible. Also, you will be informed of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of your equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
The internal modem will not work with party lines, cannot be connected to a coin-operated telephone, and may not work with a private branch exchange (PBX).
Telephone Consumer Protection Act
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it was sent and an identification of the business or other entity, or individual sending the message and the telephone number of the sending machine of such business, entity, or individual.
Information You Need in Canada
The Industry Canada (IC) label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. The Department does not guarantee the equipment will operate to a user’s satisfaction.
Before installing this equipment, make sure that you are permitted to connect to the facilities of the local telecommunications company. Be sure you use an acceptable method of connection to install the
equipment. In some cases, you may extend the company’s internal wiring for single-line individual service by means of a certified telephone extension cord. Be aware, however, that compliance with these conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any equipment malfunctions or repairs or alterations that you make to this equipment may cause the telecommunications company to request that you disconnect the equipment.
In Canada, contact Apple at: 7495 Birchmount Road, Markham, Ontario, L3R 5G2, 800-263-3394
Warning: Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority or electrician.
Load number: 0.6 The load number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to the telephone loop that is used by the device, to prevent overloading. The termination of a loop may consist of any combination of devices, subject only to the requirement that the sum of the load numbers of all devices does not exceed 100.
Telephone jack type: CA-11
Informations Destinées aux Utilisateurs Canadiens
L’étiquette d’Industrie Canada identifie un matériel homologué. Cette étiquette certifie que le matériel est conforme à certaines normes de protection, d’exploitation et de sécurité des réseaux de télécommunications. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de la raccorder au réseau de l’enterprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. Dans certains cas, le câblage appartenant à l’enterprise utilisé pour un service individuel à ligne unique peut être prolongé au moyen d’un dispositif homologué de raccordement (cordon prolongateur téléphonique).
97
L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la dégradation du service dans certaines situations. De fait, les enterprises de télécommunication ne permettent pas que l’on raccorde un matériel aux prises d’abonnés, sauf dans les cas précis prévus par les terifs particuliers de ces enterprises.
Les réparations de matériel homologué doivent être effectuées par un centre d’entretien canadien autorisé désigné par la fournisseur. La compagnie de télécommunications peut demander à l’utilisateur de débrancher un appareil suite à des réparations ou à des modifications effectuées par l’utilisateur ou en raison d’un mauvais fonctionnement.
Veuillez contacter Apple pour des informations supplémentaires:
Apple Canada, Inc. 7495 Birchmount Road Markham, Ontario Canada L3R 5G2
Service à la clientèle d’Apple Canada: 800-263-3394
Avertissement : Pour sa propre protection, l’utilisateur doit s’assurer que tout les fils de mise à la terre du secteur, des lignes téléphoniques et les canalisations d’eau métalliques, s’il y en a, soient raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales.
L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à une service d’inspection des installations électriques ou à un électricien, selon le cas.
Numéro de charge: 0.6 L’indice de charge (IC) assigné à chaque dispositif terminal indique, pour éviter toute surcharge, le pourcentage de la charge totale qui sera raccordée à un circuit téléphonique bouclé utilisé par ce dispositif. La terminaison du circuit bouclé peut être constituée de n’importe quelle combinaison de dispositifs pourvu que la somme des indices de charge de l’ensemble des dispositifs ne dépasse pas 100.
Type de prise téléphonique: CA-11
Information You Need in the United Kingdom
This terminal equipment is intended for direct connection to the analogue Public Switched Telecommunications Network and is approved for use within the United Kingdom with the following features:
Modem facility
Autocalling facility
Autoanswer facility
DTMF signaling
Operation in the absence of proceed indication or upon detection of proceed indication
This product is in conformity with relevant regulatory standards following the provisions of European Council Directives 73/23/EEC (Low Voltage Directive) and 89/336/EEC amended by 92/31/EEC (EMC Directive).
Informationen fur Deutschland
Diese Modem-Karte ist als Endeinrichtung vorgesehen und muss an ein TAE mit F-Kodierung angeschlossen werden. Diese Endeinrichtung ist in Konformität gemäss Niederspannungsrichtlinie 73 / 23 / EWG sowie EMC-Richtlinien 89 / 336 / EWG und 92 / 31 / EWG.
Informations pour la France
Ce matériel est conforme aux normes applicables de sécurité éléctrique d’après la directive 73 / 23 / CEE et aux normes applicables de comptabilité éléctromagnétique d’après la directive 89 / 336 / CEE, modifié par la directive 92 / 31 / CEE.
Information You Need in Australia
All telecommunications devices are required to be labelled as complying to the Australian telecommunications standards, ensuring the health and safety of the operator and the integrity of the Australian telecommunications network. To provide compliance with the Australian Communications Authority’s technical standards, please ensure that the following AT commands are maintained:
ATB0 (ITU/CCITT operation)
AT&G0 (no guard tone)
AT&P1 (33/66 pulse dial make/break ratio)
ATS0 = 0 or ATS0 = 1 (no answer or answer greater
than one ring)
ATS6 = 95 (DTMF period between 70–255 ms)
ATS11 = 95 (DTMF period between 70–255 ms)
For calls that are automatically generated, a total of three call attempts are allowed to a telephone number, with a minimum period between calls of 2 seconds. If the call does not connect after three attempts, 30 minutes must expire before automatic redialing may be initiated. Failure to set the modem (and any associated communications software) to the above settings may result in the modem being non-compliant with Australian telecommunications standards. Under these circumstances a user could be subject to significant penalties under the Telecommunications Act 1997.
98
This modem must be properly secured in order for you to use it. Telecommunications network voltages exist inside the computer and the telecommunications line connection must be removed before opening the computer.
Information You Need in New Zealand
This modem is fully approved to operate on the New Zealand telecommunications network under Telepermit number PTC 211/02/142. All telecommunications devices are required to hold a Telepermit and be labelled accordingly with the approved Telepermit number to comply with the New Zealand telecommunications standards, ensuring the health and safety of the operator and the integrity of the New Zealand telecommunications network. To ensure compliance, all calls that are automatically generated should not make more than 10 call attempts to the same number within any 30 minute period with a minimum period between calls of 30 seconds. Failure to adhere to these standards may result in the modem being non-compliant with New Zealand Telecom standards. Under these circumstances a user could be subject to significant penalties.
Important: The grant of a Telepermit for any item of terminal equipment indicates that only Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
99
Loading...