ITEM # _______________________________________________
MODEL # _____________________________________________
|
Warewashing |
PROJECT NAME # ______________________________________ |
||
105″ Multi Tank Conveyor Dishwasher |
||||
SIS # _________________________________________________ |
||||
with Energy Saving Device (ESD) |
||||
|
|
|||
|
WT105 |
AIA # _________________________________________________ |
||
|
|
|
|
|
|
|
|
|
|
|
|
Main features |
||
|
|
|||
|
|
• Energy Saving Device (ESD). The ESD is an internal condenser which utilizes the |
||
|
|
steam generated by the machine in the rinse and wash tanks to heat up |
||
|
|
incoming cold water. The incoming cold water is heated up to 120 °F and a built |
||
|
|
in booster will heat this water up to 180 °F (min) for the final sanitizing rinse. |
||
|
|
• DUO Rinse. Unit to feature 23″ rinse tank with two rinse arms (top and bottom). |
||
|
|
• Large 40 gallon wash tank with two wash pumps. 3 HP wash pump for top |
||
|
|
wash arms and 1.5 HP wash pump for lower wash arms. Wash arms specifically |
||
|
|
designed for maximum soil removal. |
||
|
|
• Built in atmospheric booster system with air break. |
||
|
|
• Built in rinse booster pump guarantees constant rinse pressure. |
||
|
|
• Speed of conveyor can be set through the control panel by the operator. |
||
|
|
150 racks/hr or 250 racks/hr. |
||
|
|
• Large counter balanced inspection doors in pre wash, wash and rinse sections |
||
|
|
allow unrestricted all round access to the wash and rinse area. Door is insulated |
||
Warewashing |
|
with injected foam. This adds strength as well as reduces noise and heat loss. |
||
|
• Large filters sloping towards the front to the smaller pressed filter box for quick |
|||
105" Multi Tank Conveyor Dishwasher |
||||
removal. Filters feature holes smaller than the concave ant-block wash nozzles so |
||||
with Energy Saving Device (ESD) WT105 |
large food cannot enter and block the wash system. Filters easy to remove from |
|||
534182 (WT105AL208) |
105″ Conveyor Dishwasher with Energy |
pre wash as well as wash sections. |
||
• Adjustable feet for full access underneath the machine for cleaning. |
||||
|
Saving device. Left to Right - 208 V |
|||
534183 (WT105AR208) |
105″ Conveyor Dishwasher with Energy |
• Push button self cleaning cycle of all tanks for ease of “end of day” cleaning. |
||
• Rinse chamber without internal pipes and therefore no hidden dirt traps. |
||||
|
Saving Device. Right to Left - 208 V |
|||
534184 (WT105AL240) |
105″ Conveyor Dishwasher with Energy |
• Wash chamber without internal pipes and therefore no hidden dirt traps. |
||
|
Saving device. Left to Right - 240 V |
• Pre-wash chamber without internal pipes and therefore no hidden dirt traps. |
||
534185 (WT105AR240) |
105″ Conveyor Dishwasher with Energy |
• Self draining wash pumps provide maximum hygiene with no smells and all |
||
|
Saving device. Right to Left - 240 V |
wash and rinse zones drain automatically at the push of a button. |
||
|
|
• Heavy duty stainless steel wash pump (impeller and housing). |
||
Short Form Specification |
• Pre-wash section uses cold water so food remains are not “baked” onto the plates. |
|||
|
|
• Deep drawn pressed 40 gal wash tank with fully rounded corners, sloped towards |
||
Item No. ___________________________________ |
the drain to prevent dirt build up provides fast drainage in only a few minutes. |
|||
Pressed wash tank with no welded points offer a guaranteed water tight solution. |
||||
Unit to be Electrolux WT105 Hot Water Sanitizing 105″ multi tank con- |
• Deep drawn pressed 11.8 gal pre-wash tank with fully rounded corners. |
|||
• Dishwasher structure is held together with a solid 2″ × 2″ stainless steel tube |
||||
veyor dishwasher with Energy Saving Device and built in hot water |
||||
booster. Electrical characteristics to be ____ 208 V or ____ 240 V three |
sub-frame to provide long term sturdiness. |
|||
phase operation. Unit to operate from ___ left to right or ____ right to left. |
• All main components made in heavy duty anti-corrosive 304 type stainless steel: |
|||
Unit to feature built in Energy Saving Device (ESD). ESD permits the unit |
tanks, panels, pre wash, wash & rinse arms and caps, doors, front, handle, rear |
|||
to operate with COLD WATER. Unit to include 22″ cold water pre wash |
||||
and side-panels and rack transportation system. |
||||
zone with powerful 0.5 HP pump motor. Wash zone with two individual |
||||
• Pre wash, wash and rinse arms can be easily removed for cleaning. |
||||
wash pumps. 3 HP wash pump for top wash arms and 1.5 HP wash pump |
||||
for lower wash arms. Unit to feature 23″ DUO rinse area with atmospheric |
• IPX5 (NEMA4) water protection ensures no damage from cleaning. |
|||
built in booster system and built in rinse booster pump thus guaranteeing |
• Autostart/stop ensures that the machine runs only when a rack is passing |
|||
rinse pressure during rinse cycle. Unit to feature two conveyor speeds |
||||
through it. This reduces both water and energy consumption. |
||||
which can be selected from the control panel by the operator, 150 racks/ |
||||
• Internal curtains made of silastic material and are not affected by detergent or heat. |
||||
hour or 250 racks/hour. Maximum water consumption at 250 racks/hour |
||||
of only 87 gal/hour (0.3 gal/rack) of COLD WATER. Unit to feature large |
• Electronic control panel features large display for reading of pre wash, wash and |
|||
heat and noise insulated front counter balanced door in pre wash, wash |
rinse temperatures. |
|||
and rinse tanks for easy access of internal components. Unit to feature |
• Low water consumption. At 250 racks per hour, the machine uses only 87 gal/hr |
|||
as standard end of day self cleaning cycle. Drain of water from the |
||||
(0.3 gal/rack). |
||||
machine can be done through the control panel. Large deep drawn 40 gal |
||||
• Machine predisposed for external detergent and rinse aid connections. |
||||
wash tank for extended wash sessions. |
||||
Covered by Electrolux Platinum Star® Service Program two-year parts |
Included Accessories |
|||
and one-year labor warranty, installation start-up and performance check- |
• Vent cowls (left and right side). |
|||
up after one year from installation. |
||||
|
|
• One open sided dishwasher rack for trays. |
||
|
|
|||
|
|
• Rack for cups. |
||
|
|
• Rack for dinner plates. |
||
|
|
Optional Accessories |
||
|
3048424 |
• Ventilation activation kit. |
||
|
|
Approval: ___________________________________________
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
WT105 (ESD) Device Saving Energy with Dishwasher Conveyor Tank Multi 105" |
Warewashing |
|
|
Electric
Supply voltage: |
534182 (WT105AL208) |
208 V/3ph/60Hz |
|
534183 (WT105AR208) |
208 V/3ph/60Hz |
|
534184 (WT105AL240) |
240 V/3ph/60Hz |
|
534185 (WT105AR240) |
240 V/3ph/60Hz |
Dishwasher requires two separate electrical service connections. Refer to below table for Amp requirements.
Connection 1: |
208 V/3ph/60Hz |
71A |
|
240 V/3ph/60Hz |
62A |
Connection 2: |
208 V/3ph/60Hz |
69A |
|
240V/3ph/60Hz |
62A |
Total Amp Load: |
208 V/3ph/60Hz |
136.1A (44.4 kW) |
|
240 V/3ph/60Hz |
121.1A (44.4 kW) |
Exhaust Requirements
Unit supplied as standard with extended vent hoods (can be removed during installation if not required).
Exhaust extraction not more than 100 CFM
Refer to installation diagram for minimum exhaust hood installation height .
Key Information
Productivity racks per hour |
250 racks / 4500 dishes |
(max speed): |
(average 18 dishes per rack) |
Productivity racks per hour |
150 racks / 2700 dishes |
(min speed): |
(average 18 dishes per rack) |
Table to Table connection: |
106-1/4″ (2698 mm) |
Number of Tanks: |
3 |
Height with door open: |
83-7/16″ (2119 mm) |
Charging hole size (width): |
20-7/8″ (530 mm) |
Charging hole size (height): |
19-3/4″ (501 mm) |
Shipping weight: |
1327 lb (602 kg) |
Shipping width: |
129-15/16″ (3300 mm) |
Shipping depth: |
40-15/16″ (1040 mm) |
Shipping height: |
81-1/8″ (2060 mm) |
Shipping volume: |
148 cu.ft (4.183) |
Noise level: |
<70 dBA |
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.
Warewashing
105″ Multi Tank Conveyor Dishwasher with Energy Saving Device (ESD) WT105
Water
Inlet Water supply pressure: |
22 – 102 psi (150 – 700 kPa) |
Inlet Cold Water Supply Temperature |
39 – 59 °F (4 - 15 °C) |
for pre wash and rinse section: |
|
Inlet Hot Water Supply Temperature |
140 °F (60 °C) |
for wash section: |
|
Inlet Water supply hardness: |
4-8 gpg (7-14 °fH) max |
Incoming Cold Water line size |
G 3/4″ |
(pre wash): |
|
Incoming Hot Water line size |
G 3/4″ |
(wash section): |
|
Incoming Cold Water line size (rinse): |
G 3/4″ |
Drain line size (pre wash section): |
G 1-1/2″ |
Drain line size (wash section): |
G 1-1/2″ |
Drain line size (rinse section): |
G 1-1/2″ |
Hot Water consumption: Gallons/hr: |
4 gal/hr (15 liters) |
Cold Water consumption: Gallons/hr: |
83 gal/hr (315 liters) |
Water consumption/rack: |
0.3 gal/rack (0.75 l/rack) |
Pre wash Temperature: |
< 105 °F (<40 °C) |
Pre wash tank size: |
11.8 gal (45 liters) |
Pre wash pump power: |
0.5 hp (0,37 kW) |
Pre Wash water flow: |
39 gal/min (150 l/min) |
Wash Temperature: |
160 – 172 °F (71-78 °C) |
Wash tank size: |
40 gal (150 liters) |
Wash pump power (top wash arms): |
3 hp (2.2 kW) |
Wash pump power (lower wash arms): |
1.5 hp (1.2 kW) |
Power Rinse Temperature: |
160 – 172 °F (71-78 °C) |
Power rinse tank size: |
6 gal (23 liters) |
Rinse pump power: |
0.4 hp (0.32 kW) |
Final Rinse Temperature: |
180 – 194 °F (82-90 °C) |
Final Rinse water flow: |
79 gal/min (300 l/min) |
Hot water booster capacity: |
3 gal (11.3 liters) |
Initial fill Hot Water requirements: |
40 gal (150 liters) |
Initial fill Cold Water requirements: |
11.8 gal (45 liters) |
Warewashing |
|
105″ MultiTank Conveyor Dishwasher with Energy Saving Device (ESD) WT105 |
10-29-08 |