Toshiba RAS-22SAV-E, RAS-18SKV-E, RAS-22SKV-E, RAS-18SAV-E Owners Manual

OWNER’S MANUAL

AIR CONDITIONER (SPLIT TYPE)

For general public use

Indoor unit

RAS-18, 22 SKV(R) Series

Outdoor unit

RAS-18, 22 SAV Series

ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

DEUTSCH PORTUGUÊS POLSKI

ÿESKY

PУCСКИЙ

HRVATSKI

MAGYAR

TÜRKÇE NEDERLANDS

ΕΛΛΗΝΙΚΑ

SVENSKA

SUOMI

NORSK

DANSK

ROMÂNĄ

БЪЛГАРСКИ

EESTI

LATVISKI

SLOVENÿINA

SLOVENŠÿINA

0650 03.indb

/25/08 0:4 :43 AM

PRECAUTIONS FOR SAFETY

DANGER

•Do not install, repair, open or remove the cover. It may expose you to dangerous voltages. Ask the dealership or the specialist to do this.

•Turning off the power supply will not prevent potential electric shock.

•The appliance shall be installed in accordance with national wiring regulation.

•Means for disconnection from the supply having a contact separation of at least 3 mm in all poles must be incorporated in the fi xed wiring.

WARNING

•Do not expose your body directly to cool air for a long time.

•Do not insert your fi nger or any article into the air inlet/outlet.

•When an abnormality (burning smell, etc.) occurs, stop the air conditioner and turn off the circuit breaker.

•Installation must be requested from the supplying retail dealership or professional installation vendors. Installation requires special knowledge and skill. If customers install on their own, it can be a cause of fi re, electric shock, injury or water leakage.

•Do not select a location for installation where fl ammable gas may leak. If there is any gas leakage or accumulation around the unit, it can be a cause of fi re.

•Do not turn ON/OFF the circuit breaker or operate buttons with a wet hand. It may be a cause of electric shock.

•Do not disassemble, modify or relocate the unit by yourself. It may become the cause of fi re, electric shock, or water leakage. For repair or relocation, please request service from the supplying retail dealership or a Toshiba dealership.

•Do not select a location for installation where there may be excessive water or humidity, such as a bathroom. Deterioration of insulation may be a cause of electric shock or fi re.

•When relocating or repairing the unit, please contact the supplying retail dealership. When there is a kink in the wiring, it may be the cause of electric shock or fi re.

•During an error (such as a burning odor, not cooling, or not warming), stop operating the unit and turn off the circuit breaker. Continuous operation may be a cause of fi re, or electric shock. Please request repair or service from the supplying retail dealership or a Toshiba dealership.

•Earth work should be requested from the supplying retail dealership or professional vendors. Insuffi cient grounding work may be the cause of electric shock. Do not connect the earth wire to a gas pipe, water pipe, lightning conductor, or telephone earth wire.

•If the indoor unit piping outlet is exposed due to relocation, close the opening. Touching internal electrical parts may cause injury or electric shock.

•Do not insert any material (metal, paper, or water, etc) into the air outlet or air intake opening. Fan may be rotating at high speed inside or there are high voltage sections, which may cause an injury or electric shock.

•You must use a independent power outlet for the power supply. If a power outlet other than the independent outlet is used, it may cause a fi re.

•When the air-conditioning unit does not cool or warm, there may be a leakage of refrigerant. Please consult the supplying retail dealership. The refrigerant used in the air-conditioning unit is safe. It will not leak under normal operating conditions but if it leaks into the room and contacts a heat source such as a heater, or stove, it may cause a harmful reaction.

•When water or other foreign substances enter the internal parts, stop operating the unit immediately and turn off the circuit breaker. Operating the unit continuously may cause fi re or electric shock. Please contact the supplying retail dealership for repair.

•Do not clean the inside of the air-conditioning unit yourself. Please request internal cleaning of the air-conditioning unit from the supplying retail dealership. Incorrect cleaning may cause breakage of resin parts or insulation defects of electrical parts, causing water leakage, electric shock or fi re.

•Do not damage or modify the power cable. Do not connect the cable midway, or use a multiple outlet extension cord that is shared by other devices. Failure to do so may cause fi re.

•Do not place heavy objects on the power cable, expose it to heat, or pull it. To do so may cause electrical shock or fi re.

CAUTION

•Check that the circuit breaker is installed correctly. If the circuit breaker is not properly installed, it may cause an electric shock. To check the installation method, please contact the supplying retail dealership or the professional vendor who installed the unit.

•When using the unit in a closed room, or operating with other combustion appliances, make sure to open a window occasionally for ventilation. Insufficient ventilation may cause suffocation due to a lack of oxygen.

•Avoid operating for long periods in a high humidity environment (over 80%) such as with the windows or doors open. There may be condensation on the indoor unit and droplets may fall onto the furniture.

•When the unit won’t be used for a long time, turn off the main switch or the circuit breaker.

•It is recommended that maintenance be performed by a specialist when the unit has been operated for a long time.

•At least once a year check if the mounting table of the outdoor unit is damaged or not. If a damaged state is ignored, the unit may fall or over-turn, causing an injury.

•Stand on a sturdy ladder when attaching/detaching the front panel/air filter/air cleaning filter. Failure to do so may cause a fall or injury.

•Do not stand on the outdoor unit or place anything on the unit. It may be the cause of injury due to falling or over-turning. Any damage to the unit may cause an electric shock or fire.

•Do not use combustion appliances in the direct flow of the air from the airconditioning unit. Poor combustion of a combustion appliance may cause suffocation.

•Do not place anything around the outdoor unit or allow fallen leaves to accumulate around it. If there are fallen leaves, small animals could enter and contact internal electrical parts, causing a failure or fire.

•Do not place animals and plants in places where wind from the air-conditioning unit flows directly. It may have a negative influence on the animal or plant.

•Ensure that drained water is discharged. When the discharging water process is not sufficient, water may leak, causing water damage to furniture. To check that the installation method used is correct, please contact the supplying retail dealership or the professional vendor who installed the unit.

•Do not place any containers such as a vase containing fluid on the unit. It might cause water to enter the unit and deteriorate the electrical insulation, causing an electric shock.

•Do not use for special applications such as storage of food or animals, or to display plants, precision devices, or art objects. Do not use on ships or in other vehicles. It may cause a failure in the air-conditioning unit. In addition, it may damage these items.

•Do not place other electrical appliances or furniture under the unit. Water droplets might fall, causing damage or failure.

•When cleaning, you must stop operating the unit and turn off the circuit breaker. Since the fan inside may be rotating at high speed, it may cause an injury.

•Do not wash the main air-conditioning unit with water. It may cause an electric shock.

•After the front panel/air filter is cleaned, wipe away any water and allow to dry. If water remains, it may cause an electric shock.

•Once the front panel is removed, do not touch the metal parts of the unit. It may cause an injury.

•Do not touch the air intake section or the aluminum fins of the unit. It may cause injury.

•When you hear thunder and there might be a lightning strike, stop operating the unit and disconnect the circuit breaker. If lightning strikes, it may cause a failure.

•Batteries for remote control unit:

-Should be inserted with correct polarity (+) and (-).

-Should not be recharged.

-Do not use batteries for which the “Recommended usage period” has expired.

-Do not keep used batteries inside the remote control unit.

-Do not mix different types of batteries, or mix new batteries with old ones.

-Do not directly solder the batteries.

-Do not short-circuit, disassemble, heat, or throw batteries into a fire. If batteries are not disposed of correctly, they may burst or be the cause of fluid leakage, resulting in burns or injuries. If touching the fluid, wash thoroughly with water. If it touches devices, wipe off to avoid direct contact.

-Do not place within reach of small children. If a battery is swallowed, consult a doctor immediately.

1 INDOOR UNIT DISPLAY

				4			5		1
									2
Hi POWER		FILTER		PURE TIMER			OPERATION		3
									3
1		2		3
							RESET		4

6 5

6

Hi POWER (Green)

FILTER (Orange)

PURE (Blue) ( 8, 22SKVR series)

PRE. DEF (Preheat/Defrost) (Orange) ( 8, 22SKV series)

TIMER (Yellow)

OPERATION (Green)

RESET button

0650 03.indb 2

/25/08 0:4 :49 AM

2 PREPARATION BEFORE USE

Preparing Filters

. Open the air inlet grille and remove the air fi lters.

2. Attach the fi lters. (see detail in the accessory sheet).

A

C

L

Loading Batteries

. Remove the battery cover.

2.Insert 2 new batteries (AAA type) following the (+) and (–) positions.

Clock Setup

. Push CLOCK Ο by tip of the pencil.

If timer indication is fl ashing, go to the next step 2.

2. Press	ON	or	OFF : adjust the time.
3. Press	SET	: Set the time.

Remote Control Reset

. Remove the batteries.

2. Press .

3. Insert the batteries.

3 AIR FLOW DIRECTION

		FIX
1	Press	: Move the louver in the
	desired vertical direction.
		SWING
2	Press	: Swing the air
	automatically and press again to stop.

For horizontal direction, adjust 3 manually.

Note:

•Do not move the louver manually by others.

•The louver may automation positioning by some operation mode.

4 REMOTE CONTROL

1 Infrared signal emitter

2 Start/Stop button

3 Mode select button (MODE)

4 Temperature button (TEMP)

5 Fan speed button (FAN)

6 Swing louver button (SWING)

7 Set louver button (FIX)

8 On timer button (ON)

9 Off timer button (OFF)

! Sleep timer button (SLEEP) " Setup button (SET)

# Clear button (CLR)

$ Memory and Preset button (PRESET) % One-Touch button (ONE-TOUCH) & High power button (Hi-POWER)

( Economy button (ECO) ) Quiet button (QUIET)

~ Comfort sleep button (COMFORT SLEEP) + Plasma Air Purifier button (PURE)

(RAS- 8, 22SKVR-E Only) , Filter reset button (FILTER) - Clock Reset button (CLOCK)

. Check button (CHK)

1

	$	PRESET	FAN
			TEMP	5
		ONE-TOUCH	MODE	4
	%			3
	2	QUIET	COMFORT	~
	)		PURE SLEEP
				&
	+	SWING FIX	Hi-POWER ECO
				(
	6
	7	TIMER	CLR	#
	8	ON	OFF	9
	!	SLEEP	SET	"
	.	CHK	FILTER CLOCK	-

,

5 ONE-TOUCH

Press the “ONE-TOUCH” button for fully automated operation that is customized to the typical consumer preferences in your region of the world. The customized settings control temperature air fl ow strength, air fl ow direction and other settings to provide you alternate contact with “ONE-TOUCH” of the button. If you prefer other settings you can select from the many other operating functions of your

Toshiba unit.

ONE-TOUCH

Press : Start the operation.

6 AUTOMATIC OPERATION

To automatically select cooling, heating, or fan only operation

MODE

. Press : Select A.

2. Press

TEMP : Set the desired temperature.

7 COOLING / HEATING / FAN ONLY OPERATION

	MODE
. Press	: Select Cool , Heat , or Fan only .
2. Press	TEMP : Set the desired temperature.

Cooling: Min. 7oC, Heating: Max. 30oC, Fan Only: No temperature indication

FAN

3.Press : Select AUTO, LOW , LOW+ , MED , MED+ , or HIGH .

8

DRY OPERATION

EN

For dehumidifi cation, a moderate cooling performance is controlled

automatically.

ES

MODE

. Press

: Select Dry .

2. Press

TEMP : Set the desired temperature.

FR

9

AIR PURIFYING OPERATION (RAS-18, 22SKVR-E Only)

IT

PURE

Press

to start and stop plasma air purifi er and air ionizer operation.

The plasma air purifi er and air ionizer can be activated or deactivated by pressing

DE

the PURE button. The air ionizer starts in conjunction with plasma air purifi er

operation.

PT

Note: The FILTER indicator (orange) turns on after PURE operation is performed

for about 000 hours.

10

Hi-POWER OPERATION

PL

CZ

To automatically control room temperature and airfl ow for faster cooling or heating

operation (except in DRY and FAN ONLY mode)

Hi-POWER

RU

Press

: Start and stop the operation.

11

ECO OPERATION

CR

To automatically control room to save energy (except in DRY and FAN ONLY

HU

mode)

ECO

Press

: Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically degree/

TR

hour for 2 hours (maximum 2 degrees increase). For heating operation the

set temperature will decrease.

12

TEMPORARY OPERATION

NL

GR

In case of the misplaced or discharged remote control

• Pressing the RESET button, the unit can start or stop

without using the remote control.

SV

• Operation mode is set on AUTOMATIC operation,

preset temperature is 25°C and fan operation is

automatic speed.

FI

13

TIMER OPERATION

NO

Set the timer when the air conditioner is operating.

DK

Setting the ON Timer

Setting the OFF Timer

1

Press

ON

: Set the desired ON timer.

Press

OFF

: Set the desired OFF timer.

RO

2

Press

SET

: Set the timer.

Press

SET : Set the timer.

3

Press

CLR

: Cancel the timer.

Press

CLR : Cancel the timer.

BG

Daily timer allows the user to set both the ON & OFF timers and will be

activated on a daily basis.

EE

Setting Everyday Timer

1

Press

ON

: Set the ON timer.

3

Press

SET

.

LV

2

Press

OFF

: Set the OFF timer.

4

Press

SET button during the ( or )

SK

mark fl ashing.

•

During the every day timer is activating, both arrows ( , ) are indicated.

Note:

SI

• Keep the remote control in accessible transmission to the indoor unit;

otherwise, the time lag of up to 5 minutes will occur.

• The setting will be saved for the next same operation.

0650 03.indb 3

/25/08 0:4 :57 AM