Toshiba RAS-M10SKCV-E, RAS-M16SKCV-E, RAS-M13SKCV-E INSTALLATION MANUAL

INSTALLATION MANUAL

AIR CONDITIONER (SPLIT TYPE)

Indoor unit RAS-M10, 13, 16SK(C)V Series

ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

DEUTSCH PORTUGUÊS POLSKIESKY

PУCСКИЙ

HRVATSKI

MAGYAR

TÜRKÇE

NEDERLANDS

ΕΛΛΗΝΙΚΑ

SVENSKA

SUOMI

NORSK

DANSK

ROMÂN

БЪЛГАРСКИ

EESTI

LATVISKI

SLOVEN INA

SLOVENŠ INA

025 59.indb

2/2 /07 :52:2 AM

EN CONTENTS
PRECAUTIONS FOR SAFETY....................................................
INSTALLATION DIAGRAM OF INDOOR AND
OUTDOOR UNITS .......................................................................	2
Optional Installation Parts .......................................................	2
INDOOR UNIT..............................................................................	3
Installation Place .....................................................................	3
Cutting a Hole and Mounting Installation Plate .......................	3
Electrical Work ........................................................................	3
Wiring Connection...................................................................	4
Piping and Drain Hose Installation ..........................................	4
Indoor Unit Fixing ....................................................................	5
Drainage..................................................................................	5
OTHERS.......................................................................................	6
Setting of Remote Control Selector Switch .............................	6
Remote Control A-B Selection.................................................	6
Test Operation ........................................................................	6
Auto Restart Setting ...............................................................	6

ES CONTENIDOS
PRECAUCIONES SOBRE SEGURIDAD ....................................
DIAGRAMA DE INSTALACIÓN DE LA UNIDAD INTERIOR Y
EXTERIOR ...................................................................................	2
Piezas de Instalación Opcional ..............................................	2
UNIDAD INTERIOR .....................................................................	3
Lugar de Instalación................................................................	3
Corte de un Ori cio y Montaje de la Placa de Instalación ......	3
Trabajo Eléctrico .....................................................................	3
Conexión de Cables................................................................	4
Instalación la Tubería y el Tubo de Desagüe .........................	4
Instalación de la Unidad Interior..............................................	5
Drenaje ...................................................................................	5
OTROS.........................................................................................	6
Con guración del interruptor de selección del mando a distancia ..	6
Mando a distancia A-B Selección............................................	6
Prueba de Operación .............................................................	6
Ajuste de Reinicio Automático ................................................	6

FR SOMMAIRE
MESURES DE SÉCURITÉ...........................................................
PLAN D’INSTALLATION DES UNITÉS INTÉRIEURE ET
EXTÉRIEURE...............................................................................	2
Pièces d’Installation en Option ...............................................	2
UNITÉ INTÉRIEURE....................................................................	3
Endroit d’Installation................................................................	3
Ouverture du Trou et Montage de la Plaque d’Installation .....	3
Travaux Electriques ................................................................	3
Connexion des Câbles ............................................................	4
Installation de la Conduite et du Tuyau de Purge ...................	4
Installation de l’Unité Intérieure...............................................	5
Drainage .................................................................................	5
AUTRES.......................................................................................	6
Réglage du sélecteur de télécommande.................................	6
Sélection de télécommande A-B .............................................	6
Opération du Test ...................................................................	6
Réglage de la Remise en Marche Automatique .....................	6

IT INDICE
PRECAUZIONI PER LA SICUREZZA .........................................
SCHEMA DI INSTALLAZIONE DELL’ UNITÀ INTERNA
E DELL’ UNITÀ ESTERNA..........................................................	2
Componenti di Installazione Opzionali ...................................	2
UNITÀ INTERNA .........................................................................	3
Luogo per l’Installazione..........................................................	3
Apertura di un Foro e Installazione della Lastra di Installazione...	3
Lavori Elettrici..........................................................................	3
Collegamento dei Cavi ............................................................	4
Installazione dei Tubi e del Tubo di Scarico ............................	4
Installazione dell’Unità Interna ................................................	5
Scarico ....................................................................................	5
ALTRI ...........................................................................................	6
Impostazione del selettore del telecomando...........................	6
Selezione A-B del telecomando ..............................................	6
Funzionamento di Prova .........................................................	6
Impostazione per la Rimessa in Funzione Automatica ...........	6

DE INHALT
SICHERHEITSVORKEHRUNGEN ..............................................
EINBAUZEICHNUNGEN FÜR INNENUND
AUSSENGERÄT..........................................................................	2
Zusätzlich erhältliche Installationsteile ...................................	2
INNENGERÄT..............................................................................	3
Aufstellungsort.........................................................................	3
Mauerdurchbruch und Befestigung der Montageplatte ..........	3
Elektrische Anschlüsse ...........................................................	3
Kabelanschlüsse .....................................................................	4
Installation von Leitungen und Kondensatschlauch ................	4
Einbau des Innengeräts ..........................................................	5
Entwässerung .........................................................................	5
SONSTIGES.................................................................................	6
Einstellen des Fernbedienungs-Wahlschalters .......................	6
Fernbedienung A-B Wahl ........................................................	6
Probelauf.................................................................................	6
Automatische Wiedereinschaltung..........................................	6

PT ÍNDICE
PRECAUÇÕES RELATIVAS A SEGURANÇA............................
ESQUEMA DE INSTALAÇÃO DAS UNIDADES INTERIOR
E EXTERIOR................................................................................	2
Peças de Instalação Opcionais...............................................	2
UNIDADE INTERIOR...................................................................	3
Local de Instalação .................................................................	3
Cortar um Orifício e Montar a Placa de Instalação .................	3
Trabalhos de Electricidade......................................................	3
Ligações Eléctricas .................................................................	4
Instalação da Tubagem e do Tubo Flexível de Dreno.............	4
Colocação da Unidade Interior................................................	5
Drenagem................................................................................	5
OUTROS ......................................................................................	6
De nição do interruptor do telecomando ................................	6
Selecção A-B do telecomando ................................................	6
Execução do Teste ..................................................................	6
De nindo de Reiniciação Automática......................................	6

PL SPIS TRE CI
ZASADY BEZPIECZE STWA.....................................................
SCHEMAT INSTALACYJNY URZ DZENIA WEWN TRZNEGO
I ZEWN TRZNEGO.....................................................................	2
Dodatkowe Cz ci Instalacyjne...............................................	2
URZ DZENIE WEWN TRZNE ...................................................	3
Miejsce Instalacji .....................................................................	3
Wycinanie Otworu oraz Monta P yty Instalacyjnej.................	3
Prace Elektryczne ...................................................................	3
Pod czenie Okablowania.......................................................	4
Monta Instalacji Rurowej i W a do Odprowadzania Cieczy ..	4
Mocowanie Urz dzenia Wewn trznego ..................................	5
Odprowadzanie Cieczy ...........................................................	5
INNE.............................................................................................	6
Ustawianie prze cznika wyboru pilota....................................	6
Ustawienia prze cznika A-B wyboru pilota.............................	6
Próba Dzia ania.......................................................................	6
W czanie Funkcji Automatycznego Wznawiania Pracy (Auto Restart) ..	6

CZ OBSAH
BEZPE NOSTNÍ OPAT ENÍ ......................................................
SCHÉMA INSTALACE VNIT NÍ A VENKOVNÍ JEDNOTKY......	2
Volitelné Dopl ky pro Instalaci ................................................	2
VNIT NÍ JEDNOTKA ..................................................................	3
Místo Instalace ........................................................................	3
Vyvrtání Otvoru a Montáž Instala ní Desky ............................	3
Elektrické Práce ......................................................................	3
Zapojení Vodi .......................................................................	4
Montáž Trubek a Vypoušt cí Hadice.......................................	4
Montáž Vnit ní Jednotky..........................................................	5
Odvod Vody.............................................................................	5
OSTATN ......................................................................................	6
Nastavení p epína e dálkového ovládání ...............................	6
Volba A-B na dálkovém ovládání.............................................	6
Zkušební Provoz .....................................................................	6
Nastavení Automatického Znovuspušt ní...............................	6

RU СОДЕРЖАНИЕ
MEPЫ БEЗOПACHOCTИ ...........................................................
СХЕМА УСТАНОВКИ ВНУТРЕННЕГО И НАРУЖНОГО
БЛОКОВ......................................................................................	2
Oпционaльныe Уcтaновочныe Чacти ...................................	2
BHУTPEHHИЙ БЛOК.................................................................	3
Mecто Уcтaновки ...................................................................	3
Пpоpeзaниe Отвepcтия и Монтaж Уcтaновочной Плacтины..	3
Элeктpомонтaжныe Рaботы.................................................	3
Элeктpичecкиe Cоeдинeния ................................................	4
Уcтaновкa Tpyбопpоводов и Дpeнaжной Tpyбки ................	4
Уcтaновкa Bнyтpeннeго Блокa.............................................	5
Дpeнaж ...................................................................................	5
ДPУГИE .......................................................................................	6
Уcтaновкa положeния пepeключaтeля диcтaнционного yпpaвлeния..	6
Выбор А-В на пульте ДУ .......................................................	6
Пpобнaя Экcплyaтaция .........................................................	6
Уcтaновкa Aвтомaтичecкого Повтоpного Пycкa.................	6

CR SADRŽAJ
MJERE SIGURNOSTI..................................................................
SHEMA UGRADNJE UNUTARNJIH I VANJSKIH JEDINICA.....	2
Dodatni Dijelovi za Ugradnju Prema Izboru ...........................	2
UNUTARNJA JEDINICA..............................................................	3
Mjesto Ugradnje ......................................................................	3
Izrezivanje Rupe i Postavljanje Plo e za Ugradnju.................	3
Elektri ni Radovi......................................................................	3
Ži ana Veza.............................................................................	4
Ugradnja Cijevi i Crijeva za Pražnjenje ...................................	4
U vrš ivanje Unutarnje Jedinice .............................................	5
Ispust.......................................................................................	5
OSTALO.......................................................................................	6
Položaji prekida a za odabir daljinskog upravlja a.................	6
Odabir A-B pomo u daljinskog upravlja a...............................	6
Probni Rad ..............................................................................	6
Postava za Automatsko Ponovno Pokretanje .........................	6

HU TARTALOMJEGYZÉK
BIZTONSÁGI EL ÍRÁSOK.........................................................
BELTÉRI ÉS KÜLTÉRI EGYSÉGEK ÜZEMBE HELYEZÉSE.....	2
Külön Rendelhet Alkatrészek ................................................	2
BELTÉRI EGYSÉG ......................................................................	3
A Felszerelés Helye.................................................................	3
Lyuk Kivágása és a Felszerelése............................................	3
Elektromos Munka...................................................................	3
Kábelezés................................................................................	4
A Csövek és a Kondenzvíztöml Felszerelése .......................	4
A Beltéri Egység Rögzítése.....................................................	5
Vízelvezetés ............................................................................	5
EGYEBEK....................................................................................	6
A távirányító kiválasztó kapcsolójának beállítása....................	6
A távirányítón az A-B állás kiválasztása..................................	6
Tesztüzem ...............................................................................	6
Automatikus Újraindítás Beállítás............................................	6

TR Ç NDEK LER
GÜVENL K ÖNLEMLER ............................................................
Ç VE DI ÜNITENIN MONTAJ EMASI ....................................	2
ste e Ba l Montaj Parçalar ..................................................	2
Ç ÜN TE ......................................................................................	3
Montaj Yeri...............................................................................	3
Bir Delik Aç lmas ve Montaj Plakas n n Yerle tirilmesi...........	3
Elektrik i ................................................................................	3
Kablo Ba lant s ......................................................................	4
Borular n Ba lanmas ve Bo altma Hortumunun Monte edilmesi ..	4
ç Ünitenin Tak lmas ...............................................................	5
Su Bo altma............................................................................	5
D ERLER ..................................................................................	6
Uzaktan Kumanda Seçici Dü mesinin Ayarlanmas ...............	6
Uzaktan Kumanda ile A-B Seçimi............................................	6
Test lemi ...............................................................................	6
Otomatik Yeniden Ba lama Ayar ............................................	6

025 59.indb 2

2/2 /07 :52:24 AM

NL INHOUDSOPGAVE
VEILIGHEIDSVOORZORGEN.....................................................
INSTALLATIESCHEMA VOOR BINNENEN
BUITENMODULES ......................................................................	2
Optionele Onderdelen .............................................................	2
BINNENMODULE ........................................................................	3
Installatieplaats........................................................................	3
Gat Boren en Montageplaat Bevestigen .................................	3
Elektriciteit ...............................................................................	3
Bedrading................................................................................	4
Leidingen en Afvoerslang Installeren ......................................	4
Binnenmodule Bevestigen.......................................................	5
Afvoer ......................................................................................	5
OVERIGE .....................................................................................	6
De keuzeschakelaar van de afstandsbediening instellen........	6
Afstandsbediening keuze A-B .................................................	6
Testwerking .............................................................................	6
Automatische Herstart Instellen ..............................................	6

GR ΠΕΡΙΕXOΜΕΝΑ
ΠΡOΦΥΛΑ ΕΙΣ ΑΣΦΑΛΕΙΑΣ.......................................................
ΔΙΆΓΡΑΜΜΑ ΕΓΚΑΤΆΣΤΑΣΗΣ ΤΗΣ ΕΣΩΤΕΡΙΚΉΣ ΚΑΙ
Ε ΩΤΕΡΙΚΉΣ ΜOΝΆΔΑΣ ..........................................................	2
Πρ αιρετικά E αρτήματα Eγκατάστασης ...........................	2
ΕΣΩΤΕΡΙΚΉ ΜOΝΆΔΑ...............................................................	3
Σημεί Eγκατάστασης ..........................................................	3
Κ ψιμ Τρύπας και Τ π θέτηση Πλάτης Εγκατάστασης...	3
Ηλεκτρικές Εργασίες............................................................	3
Σύνδεση Καλωδίωσης...........................................................	4
Εγκατάσταση Σωλήνωσης και Eύκαμπτ υ Σωλήνα Aπ στράγγισης..	4
Στερέωση Εσωτερικής Μoνάδας.........................................	5
Απoστράγγιση ........................................................................	5
ΛOΙΠΑ ..........................................................................................	6
Ρύθμιση τoυ διακ πτη επιλoγής τηλε)ειριστηρίoυ ..........	6
Επιλ γή Α-Β τoυ τηλε)ειριστηρίoυ .....................................	6
Δoκιμή Λειτoυργίας ..............................................................	6
Auto Restart Ρύθμιση ...........................................................	6

SV INNEHÅLLSLFÖRTECKNING
SÄKERHETSANVISNINGAR ......................................................
INSTALLATIONSSCHEMA FÖR INOMHUSOCH
UTOMHUSENHETEN ..................................................................	2
Valfria installationskomponenter..............................................	2
INOMHUSENHETEN ...................................................................	3
Plats för montering ..................................................................	3
Skära ut ett hål och fästa monteringsplåten............................	3
Elarbeten .................................................................................	3
Ledningsdragningar.................................................................	4
Installera rör och dräneringsslang...........................................	4
Fästa inomhusenheten............................................................	5
Dränering.................................................................................	5
ÖVRIGT........................................................................................	6
Inställning av fjärrkontrollens omkopplare...............................	6
Fjärrkontroll A-B Val.................................................................	6
Testkörning ..............................................................................	6
Inställning av omstart ..............................................................	6

FI SISÄLLYSLUETTELO
VAROTOIMENPITEET.................................................................
SISÄJA ULKOYKSIKKÖJEN ASENNUSKAAVIO....................	2
Lisävarusteena saatavat asennusosat....................................	2
SISÄYKSIKKÖ.............................................................................	3
Asennuspaikka........................................................................	3
Aukon tekeminen ja asennuslevyn kiinnittäminen...................	3
Sähkötyöt ................................................................................	3
Johtoliitännät ...........................................................................	4
Putkiston ja tyhjennysletkun asentaminen ..............................	4
Sisäyksikön kiinnittäminen ......................................................	5
Vedenpoisto.............................................................................	5
MUUT ...........................................................................................	6
Kauko-ohjaimen valitsinkytkimen säätäminen.........................	6
Kauko-ohjaimen A-B valinta ....................................................	6
Koekäyttö ................................................................................	6
Automaattisen uudelleenkäynnistyksen asettaminen..............	6

NO INNHOLDSFORTEGNELSE
SIKKERHETSREGLER ...............................................................
KOBLINGSSKJEMA FOR INNEOG UTENDØRSENHETEN ...	2
Ekstrautstyr .............................................................................	2
INNENHETEN ..............................................................................	3
Plassering................................................................................	3
Lage et Hull og Montere Montasjeplaten.................................	3
Elektrisk Arbeid........................................................................	3
Tilkobling av Ledninger............................................................	4
Installasjon av Rør og Avløpsslange .......................................	4
Plassering av Innendørsenheten.............................................	5
Avløp .......................................................................................	5
ANNET .........................................................................................	6
Stille fjernkontrollbryteren........................................................	6
Fjernkontroll A-B valg ..............................................................	6
Testdrift....................................................................................	6
Innstillinger for Auto Restart ....................................................	6

DK INDHOLD
SIKKERHEDSFORHOLDSREGLER...........................................
INSTALLATIONSDIAGRAM FOR INDDØRS OG UDENDØRS
ENHED.........................................................................................	2
Valgfrie installationsdele..........................................................	2
INDENDØRS ENHED ..................................................................	3
Installationssted.......................................................................	3
Skæring af et hul og montering af installationspladen.............	3
Elektrisk arbejde......................................................................	3
Tilslutning af kabel...................................................................	4
Installation af rør og drænrør...................................................	4
Fastsætning af den indendørs enhed......................................	5
Dræning...................................................................................	5
ANDET .........................................................................................	6
Indstilling af fjernbetjeningskontakten .....................................	6
Valg af fjernbetjening A-B ........................................................	6
Testdrift ...................................................................................	6
Auto-omstartsindstilling ...........................................................	6

RO CON INUT
M SURI DE SIGURAN ...........................................................
SCHEMA DE INSTALARE A UNIT ILOR INTERIOAR I
EXTERIOAR ..............................................................................	2
Piese de instalare op ionale ....................................................	2
UNITATE INTERIOAR ...............................................................	3
Locul de instalare ....................................................................	3
Executarea unei g uri i montarea pl cii de instalare.............	3
Lucr rile electrice ....................................................................	3
Racordarea cablurilor..............................................................	4
Instalarea evilor i a furtunului de evacuare...........................	4
Fixarea unit ii interioare.........................................................	5
Evacuarea ...............................................................................	5
ALTELE........................................................................................	6
Setarea butonului selector al telecomenzii..............................	6
Alegerea telecomenzii A-B ......................................................	6
Veri carea func ion rii.............................................................	6
Setarea Auto Restart (repornirea automat ) ...........................	6

BG СЪДЪРЖАНИЕ
ПРЕДПАЗНИ МЕРКИ ЗА БЕЗОПАСНОСТ ..............................
ДИАГРАМА ЗА ИНСТАЛИРАНЕ НА ВЪТРЕШНИЯТ И
ВЪНШНИЯТ МОДУЛ .................................................................	2
Допълнителни елементи за монтаж ....................................	2
ВЪТРЕШЕН МОДУЛ ..................................................................	3
Място за монтаж ...................................................................	3
Пробиване на отвор и монтиране на монтажната планка ..	3
Работа по електрическата система.....................................	3
Свързване на кабелите ........................................................	4
Инсталиране на тръбите и гъвкавата дренажна тръба ....	4
Фиксиране на вътрешния модул ..........................................	5
Дренаж ...................................................................................	5
ДРУГИ..........................................................................................	6
Настройване на избиращия превключвател за
дистанционно управление ....................................................	6
Избиране на настройки „А” или „В” на дистанционното
управление.............................................................................	6
Тестов режим .........................................................................	6
Настройка за автоматично рестартиране .........................	6

EE SISUKORD
OHUTUSABINÕUD......................................................................
SISEJA VÄLISSEADMETE PAIGALDUSSKEEM ....................	2
Valikulised paigaldusdetailid....................................................	2
SISESEADE.................................................................................	3
Paigalduskoht..........................................................................	3
Augu tegemine ja paigaldusplaadi monteerimine....................	3
Elektrilised tööd.......................................................................	3
Kaablite ühendamine...............................................................	4
Torustiku ja äravooluvooliku paigaldamine..............................	4
Siseseadme parandamine.......................................................	5
ravool ....................................................................................	5
MUU .............................................................................................	6
Kaugjuhtimispuldi valija seadistamine.....................................	6
Kaugjuhtimispuldi A- ja B-sätted..............................................	6
Testfunktsioon .........................................................................	6
Automaatse taaskäivitamise säte............................................	6

LV SATURS
PROFILAKTISKIE DROŠ BAS PAS KUMI ...............................
IEKŠTELPAS UN RA AGREG TA MONT ŽAS SH MA........	2
Papildapr kojuma mont žas da as .........................................	2
IEKŠTELPAS AGREG TS..........................................................	3
Mont žas vieta ........................................................................	3
Cauruma izveide un mont žas pl ksnes uzst d šana............	3
Elektroinstal cijas darbi...........................................................	3
Kabe u savienojumi .................................................................	4
Cauru u un dren žas š tenes uzst d šana............................	4
Iekštelpas agreg ta piestiprin šana........................................	5
Dren ža...................................................................................	5
PAPILDINFORM CIJA................................................................	6
T lvad bas pults selektorp rsl ga iestat šana........................	6
T lvad bas pults rež ma A/B izv le.........................................	6
Darb bas p rbaude .................................................................	6
Darb bas autom tisk s ats kšanas funkcijas iestat šana ......	6

SK OBSAH
BEZPE NOSTNÉ ZÁSADY ........................................................
INŠTALA NÁ SCHÉMA VNÚTORNEJ A VONKAJŠEJ JEDNOTKY ..	2
Volite né inštala né diely .........................................................	2
VNÚTORNÁ JEDNOTKA ............................................................	3
Miesto inštalácie......................................................................	3
Zhotovenie diery a montáž inštala nej lišty.............................	3
Elektroinštala ná práca...........................................................	3
Pripojenie vodi ov ...................................................................	4
Inštalácia rúrok a odvod ovacej hadice ..................................	4
Upevnenie vnútornej jednotky.................................................	5
Odvod ovanie .........................................................................	5
INÉ................................................................................................	6
Nastavenie prepína a na dia kovom ovláda i.........................	6
Vo ba A-B na dia kovom ovláda i ............................................	6
Testovacia prevádzka..............................................................	6
Nastavenie automatického reštartu.........................................	6

SI VSEBINA
VARNOSTNI UKREPI..................................................................
NAMESTITVENA SHEMA NOTRANJE IN ZUNANJE ENOTE...	2
Izbirni namestitveni deli...........................................................	2
NOTRANJA ENOTA ....................................................................	3
Mesto za namestitev ...............................................................	3
Rezanje luknje in montaža namestitvene ploš e ....................	3
Elektri arsko delo....................................................................	3
Priklju itev napeljave...............................................................	4
Namestitev odvodne in ostalih cevi.........................................	4
Pritrditev notranje enote ..........................................................	5
Odvajanje ................................................................................	5
DRUGO ........................................................................................	6
Nastavitev izbirnega stikala daljinskega upravljalnika.............	6
Izbira nastavitve A-B na daljinskem upravljalniku....................	6
Preizkus delovanja ..................................................................	6
Nastavitev za samodejni ponovni zagon.................................	6

025 59.indb 3

2/2 /07 :52:3 AM

PRECAUTIONS FOR SAFETY

For general public use

Power supply cord of parts of appliance for outdoor use shall be at least polychloroprene sheathed exible cord (design H07RN-F) or cord designation 245 IEC66 ( .5 mm2 or more). (Shall be installed in accordance with national wiring regulations.)

CAUTION	New refrigerant air conditioner installation

• THIS AIR CONDITIONER USES THE NEW HFC REFRIGERANT (R4 0A), WHICH DOES NOT DESTROY THE OZONE LAYER.

R4 0A refrigerant is apt to be affected by impurities such as water, oxidizing membranes, and oils because the pressure of R4 0A refrigerant is approx..6 times of refrigerant R22. As well as the adoption of this new refrigerant, refrigerating machine oil has also been changed. Therefore, during installation work, be sure that water, dust, former refrigerant, or refrigerating machine oil does not enter the refrigeration cycle of a new-refrigerant air conditioner.

To avoid mixing refrigerant and refrigerating machine oil, the sizes of charging port connecting sections on the main unit are different from those for the conventional refrigerant, and different size tools are also required. For connecting pipes, use new and clean piping materials with highpressure withstand capabilities, designed for R4 0A only, and ensure that water or dust does not enter. Moreover, do not use any existing piping as its pressure withstand may be insuf cient and may contain impurities.

CAUTION	To disconnect the appliance from the main power supply

Disconnection from the supply mains: The means for disconnection must be incorporated in the xed wiring in accordance with the wiring rules.

The installation fuse (25A) must be used for the power supply line of this air conditioner.

DANGER

•FOR USE BY QUALIFIED PERSONS ONLY.

•TURN OFF MAIN POWER SUPPLY BEFORE ATTEMPTING ANY ELECTRICAL WORK. MAKE SURE ALL POWER SWITCHES ARE OFF. FAILURE TO DO SO MAY CAUSE ELECTRIC SHOCK.

•CONNECT THE CONNECTING CABLE CORRECTLY. IF THE CONNECTING CABLE IS CONNECTED WRONGLY, ELECTRIC PARTS MAY BE DAMAGED.

•CHECK THE EARTH WIRE THAT IT IS NOT BROKEN OR DISCONNECTED BEFORE INSTALLATION.

•DO NOT INSTALL NEAR CONCENTRATIONS OF COMBUSTIBLE GAS OR GAS VAPORS. FAILURE TO FOLLOW THIS INSTRUCTION CAN RESULT IN FIRE OR EXPLOSION.

•TO PREVENT OVERHEATING THE INDOOR UNIT AND CAUSING A FIRE HAZARD, PLACE THE UNIT WELL AWAY (MORE THAN 2 M) FROM HEAT SOURCES SUCH AS RADIATORS, HEATERS, FURNACE, STOVES, ETC.

•WHEN MOVING THE AIR CONDITIONER FOR INSTALLING IT IN ANOTHER PLACE AGAIN, BE VERY CAREFUL NOT TO GET THE SPECIFIED REFRIGERANT (R4 0A) WITH ANY OTHER GASEOUS BODY INTO THE REFRIGERATION CYCLE. IF AIR OR ANY OTHER GAS IS MIXED IN THE REFRIGERANT, THE GAS PRESSURE IN THE REFRIGERATION CYCLE BECOMES ABNORMALLY HIGH AND IT RESULTINGLY CAUSES BURST OF THE PIPE AND INJURIES ON PERSONS.

•IN THE EVENT THAT THE REFRIGERANT GAS LEAKS OUT OF THE PIPE DURING THE INSTALLATION WORK, IMMEDIATELY LET FRESH AIR INTO THE ROOM. IF THE REFRIGERANT GAS IS HEATED BY FIRE OR SOMETHING ELSE, IT CAUSES GENERATION OF POISONOUS GAS.

WARNING

•Never modify this unit by removing any of the safety guards or bypassing any of the safety interlock switches.

•Do not install in a place which cannot bear the weight of the unit. Personal injury and property damage can result if the unit falls.

•Appliance shall be installed in accordance with national wiring regulations.

If you detect any damage, do not install the unit. Contact your TOSHIBA dealer immediately.

CAUTION

•Exposure of unit to water or other moisture before installation could result in electric shock. Do not store it in a wet basement or expose to rain or water.

•After unpacking the unit, examine it carefully for possible damage.

•Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the noise level of the unit or where noise and discharged air might disturb neighbors.

•To avoid personal injury, be careful when handling parts with sharp edges.

•Please read this installation manual carefully before installing the unit. It contains further important instructions for proper installation.

025 59.indb

2/2 /07 :52:38 AM

INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS

70

mmor more

mm

Hook

65

1 Installation

or

more

plate

Hook

70

mm

or

more

Air

lter

(Attach

to

the

Shield pipe

front

panel.

5 Filter

)

6 Filter

3 Batteries

8 Pan head

4 Remote control holder

wood screw

2 Wireless remote control

Remark :

•Detail of accessory and installation parts can see in the accessory sheet.

•Some pictures might be different from the actual parts.

For the rear left and left piping

Wall

Insert the cushion between the indoor unit and wall, and tilt the indoor unit for better operation.

Do not allow the drain hose to get slack.

Cut the piping hole sloped slightly.

Make sure to run the drain hose sloped downward.

The auxiliary piping can be connected to the left, rear left, rear right, right, bottom right or bottom left.

Right

Rear right

Bottom	Rear	Left
right	left	Bottom left

Insulate the refrigerant pipes separately with insulation, not together.

Optional Installation Parts

	Part		Parts name	Q’ty
	code
		Refrigerant piping
		Liquid side	: Ø6.35 mm
	A	Gas side	: Ø9.52 mm	One
			(RAS-M 0, 3SK(C)V)	each
			: Ø 2.70 mm
			(RAS-M 6SK(C)V)
	B	Pipe insulating material
		(polyethylene foam, 6 mm thick)
	C	Putty, PVC tapes		One
				each

6 mm thick heat resisting polyethylene foam

2

EN

025 59.indb 2

2/2 /07 :52:39 AM

INDOOR UNIT

Installation Place

•A place which provides the spaces around the indoor unit as shown in the diagram

•A place where there are no obstacles near the air inlet and outlet

•A place which allows easy installation of the piping to the outdoor unit

•A place which allows the front panel to be opened

•The indoor unit shall be installed as top of the indoor unit comes to at least 2 m height. Also, it must be avoided to put anything on the top of the indoor unit.

CAUTION

•Direct sunlight to the indoor unit’s wireless receiver should be avoided.

•The microprocessor in the indoor unit should not be too close to RF noise sources.

(For details, see the owner’s manual.)

Remote control

•A place where there are no obstacles such as a curtain that may block the signal from the indoor unit

•Do not install the remote control in a place exposed to direct sunlight or close to a heating source such as a stove.

•Keep the remote control at least m apart from the nearest TV set or stereo equipment. (This is necessary to prevent image disturbances or noise interference.)

•The location of the remote control should be determined as shown below.

(Side view)	(Top view)
unit	Indoor unit
Indoor
	4	°	°
		5
			45

°		Reception
5
7
Reception	Remote	range	Remote
	control
range			control

Cutting a Hole and Mounting

Installation Plate

Cutting a hole

When installing the refrigerant pipes from the rear

80		100		180

Pipe hole

65 mm

The center of the pipe hole

is above the arrow.

100 mm

. After determining the pipe hole position on the mounting plate ( ), drill the pipe hole (Ø65 mm) at a slight downward slant to the outdoor side.

When the installation plate is directly mounted on the wall

. Securely t the installation plate onto the wall by screwing it in the upper and lower parts to hook up the indoor unit.

2.To mount the installation plate on a concrete wall with anchor bolts, use the anchor bolt holes as illustrated in the below gure.

3.Install the installation plate horizontally in the wall.

CAUTION

When installing the installation plate with a mounting screw, do not use the anchor bolt holes. Otherwise, the unit may fall down and result in personal injury and property damage.

Installation plate

(Keep horizontal direction.)

Anchor bolt

Projection

5 mm or less

5 mm dia. hole

7Mounting screw Ø4 x 25R

Clip anchor (local parts)

CAUTION

Failure to rmly install the unit may result in personal injury and property damage if the unit falls.

•In case of block, brick, concrete or similar type walls, make 5 mm dia. holes in the wall.

•Insert clip anchors for appropriate mounting screws 7.

NOTE

•Secure four corners and lower parts of the installation plate with 4 to 6 mounting screws to install it.

Electrical Work

. The supply voltage must be the same as the rated voltage of the air conditioner.

2. Prepare the power source for exclusive use with the air conditioner.

NOTE

• Wire type : More than H07RN-F or 245 IEC66

CAUTION

•This appliance can be connected to the mains in either of the following two ways.

( ) Connection to xed wiring:

A switch or circuit breaker which disconnects all poles and has a contact separation of at least 3 mm must be incorporated in the xed wiring. An approved circuit breaker or switches must be used.

NOTE

	• When drilling a wall that contains a metal lath, wire lath or metal plate, be sure	NOTE
		• Perform wiring works so as to allow a general wiring capacity.
	to use a pipe hole brim ring sold separately.

Mounting the installation plate

Anchor bolt holes

					62	82.5
	Hook
170
85
			Hook			1
	Hook			Pipe	Installation
Pipe hole					plate
	Thread			hole
			7 Mounting screw
Indoor unit		Weight

2 m or more from oor

3

025 59.indb 3

2/2 /07 :52:4 AM

Wiring Connection

How to connect the connecting cable

Wiring of the connecting cable can be carried out without removing the front panel.

. Remove the air inlet grille.

Open the air inlet grille upward and pull it toward you.

2.Remove the terminal cover and cord clamp.

3.Insert the connecting cable (according to the local cords) into the pipe hole on the wall.

4.Take out the connecting cable through the cable slot on the rear panel so that it protrudes about 5 cm from the front.

5.Insert the connecting cable fully into the terminal block and secure it tightly with screws.

6.Tightening torque : .2 N·m (0. 2 kgf·m)

7.Secure the connecting cable with the cord clamp.

8.Fix the terminal cover, rear plate bushing and air inlet grille on the indoor unit.

CAUTION

•Be sure to refer to the wiring system diagram labeled inside the front panel.

•Check local electrical cords and also any speci c wiring instructions or limitations.

Cord clamp

			Terminal block
Terminal cover
Screw
1	2	3	1	2	3
			Earth line
Screw			Connecting cable
Screw

110 mm

Earth line

10 mm

Connecting cable

about
5	cm	10 mm

50 mm

Stripping length of the connecting cable

NOTE

•Use stranded wire only.

•Wire type : H07RN-F or more

How to install the air inlet grille on the indoor unit

•When attaching the air inlet grille, the contrary of the removed operation is performed.

. Die-cutting front panel slit

Cut out the slit on the leftward or right side of the front panel for the left or right connection and the slit on the bottom left or right side of the front panel for the bottom left or right connection with a pair of nippers.

2.Changing drain hose

For leftward connection, bottom-leftward connection and rearleftward connection’s piping, it is necessary to change the drain hose and drain cap.

How to remove the drain hose

•The drain hose can be removed by removing the screw securing the drain hose and then pulling out the drain hose.

•When removing the drain hose, be careful of any sharp edges of steel plate. The edges can injuries.

•To install the drain hose, insert the drain hosermly until the connection part contacts with heat insulator, and the secure it with original screw.

Heat insulator

EN

Drain hose

How to remove the drain cap

Clip the drain cap by needlenose pliers and pull out.

How to x the drain cap

) Insert hexagon

wrench (4 mm) 4 mm in a center head.

2) Firmly insert the drain cap.

No gap

Do not apply lubricating oil (refrigerant machine oil) when inserting the drain cap. Application causes deterioration and drain leakage of the plug.

Insert a hexagon wrench (4 mm).

CAUTION

Firmly insert the drain hose and drain cap; otherwise, water may leak.

In case of right or left piping

• After scribing slits of the front panel with a knife or a making-off pin, cut them with a pair of nippers or an equivalent tool.

Slit

In case of bottom right or bottom left piping

• After scribing slits of the front panel with a

knife or a making-off pin, cut them with a pair of nippers or an equivalent tool.

Slit

Piping and Drain Hose Installation

Piping and drain hose forming

*Since dewing results in a machine trouble, make sure to insulate both connecting pipes. (Use polyethylene foam as insulating material.)

Rear right

Rear left
					Changing hosedrain	preparationPiping
Bottom left		cuttingDie-	panelfrontslit
Left
Bottom right
Right

Left-hand connection with piping

•Bend the connecting pipe so that it is laid within 43 mm above the wall surface. If the connecting pipe is laid exceeding 43 mm above the wall surface, the indoor unit may unstably be set on the wall.

When bending the connecting pipe, make sure to use a spring bender so as not to crush the pipe.

Bend the connecting pipe within a radius of 30 mm.

To connect the pipe after installation of the unit ( gure)

	(To the forefront of are)
270 mm	Gas side
230 mm	Liquid side

		Outward form of indoor unit
43 mm	R 30 mm (Use polisin (polyethylene)
	core or the like for bending pipe.)
	80	Use the handle of screwdriver, etc.

4

025 59.indb 4

2/2 /07 :52:44 AM