Self Diagnosis
Supported model
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
SERVICE / TRAINING MANUAL
ORIGINAL MANUAL ISSUE DATE: 3/2012
Version Date |
Subject |
1.03/23/2012 Original Manual Release Date
AZ3TK Chassis
Segment: P-2F
LCD Digital Color TV
9-883-879-01
Self Diagnosis
Supported model
SERVICE / TRAINING MANUAL
AZ3TK Chassis
Segment: P-2F
LCD Digital Color TV
KDL-40BX455
9-883-879-01
|
MODEL |
COMMANDER |
DESTINATION |
|
MODEL |
COMMANDER |
DESTINATION |
KDL-32BX355 |
RM-YD081 |
BRAZIL |
KDL-40BX455 |
RM-YD081 |
BRAZIL |
||
|
|
|
|
KDL-46BX455 |
RM-YD081 |
BRAZIL |
9-883-879-01
Cautions and Warnings................................................................................... |
ii |
Section 1 - Features and Overview................................................................. |
1 |
Features......................................................................................................... |
1 |
Specifications................................................................................................. |
1 |
Chassis Overview.......................................................................................... |
3 |
Overall Circuit Description.............................................................................. |
5 |
Main Board................................................................................................ |
5 |
Power Supply Board.................................................................................. |
5 |
IR Board.................................................................................................... |
5 |
Switch Unit................................................................................................ |
5 |
LCD Panel Assembly................................................................................. |
6 |
Section 2 - Troubleshooting............................................................................ |
7 |
Overview........................................................................................................ |
7 |
Updating the Software............................................................................... |
7 |
Self Diagnosis Function................................................................................. |
7 |
Standby LED Blink Count.......................................................................... |
7 |
Viewing the Self Check Diagnosis History................................................ |
8 |
Triage Chart................................................................................................. |
10 |
Section 3 - Flow Charts and Diagrams......................................................... |
11 |
Block Diagram.............................................................................................. |
11 |
No Power................................................................................................. |
12 |
Standby LED Blinking.............................................................................. |
13 |
No Video.................................................................................................. |
14 |
Section 4 - Disassembly/Part Number Information..................................... |
16 |
Table-Top Stand and Rear Cover Removal................................................. |
16 |
Main Board (A) and Power Supply Board (G) Removal............................... |
17 |
LCD Panel Removal..................................................................................... |
18 |
Cleaning the LCD Panel.......................................................................... |
18 |
Connectors................................................................................................... |
19 |
Screws......................................................................................................... |
19 |
Accessories and Packaging......................................................................... |
20 |
Wire Dressing............................................................................................... |
21 |
Section 5 - Updates and Adjustments.......................................................... |
22 |
Overview...................................................................................................... |
22 |
Software Updates for Customers................................................................. |
22 |
Software Updates for Servicers................................................................... |
22 |
Software Update Responsibility.............................................................. |
23 |
Checking the Software Version............................................................... |
23 |
Examples of Software Correctable Symptoms........................................ |
23 |
Accessing Service Adjustment Mode........................................................... |
24 |
Completing Service Requirements |
|
When Replacing the Main Board................................................................. |
24 |
Viewing the Status Information................................................................ |
25 |
Adding the Serial Number....................................................................... |
25 |
Selecting the Model Name...................................................................... |
26 |
Completing Service Requirements |
|
When Replacing the LCD Panel.................................................................. |
26 |
Viewing the Status Information................................................................ |
27 |
Changing the LVDS Spectrum................................................................ |
27 |
Selecting the LCD Panel........................................................................ |
27 |
Verify before proceeding to the next step:............................................... |
27 |
Optional Service Adjustments...................................................................... |
28 |
Adjusting the Sound................................................................................ |
28 |
Wide Band Tuning Adjustments.............................................................. |
29 |
Range Scan Adjustments........................................................................ |
29 |
APPENDIX A: ENCRYPTION KEY COMPONENTS..................................... |
A-1 |
KDL-32BX355/40BX455/46BX455 |
i |
CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to avoid possible shock hazard, in case of live chassis.
! SAFETY-RELATED COMPONENT WARNING!!
There are critical components used in LCD color TVs that are important for safety. These components are identified with shading and ! mark on the schematic diagrams and the parts list. It is essential that these critical parts be replaced only with the part number specified in the parts list to prevent electric shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and labor warranty.
KDL-32BX355/40BX455/46BX455 |
ii |
CAUTIONS AND WARNINGS
SETTING UP AND CARRYING THE TV
●● Disconnect all cables when carrying the TV.
●● Carry the TV with the adequate number of people; larger size TVs require two or more people. ●● Correct hand placement while carrying the TV is very important for safety and to avoid damage.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by using a wrist band.
When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.
1.Do not press on the panel or frame edge to avoid the risk of electric shock.
2.Do not scratch or press on the panel with any sharp objects.
3.Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.
4.Do not expose the LCD panel to direct sunlight.
5.Avoid contact with water. It may cause a short circuit within the module.
6.Disconnect the AC power when replacing the backlight or inverter circuit. (High voltage occurs at the inverter circuit at 650Vrms.)
7.Always clean the LCD panel with a soft cloth material.
8.Use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.
9.Protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).
10.During the repair, DO NOT leave the Power On for more than 1 hour while the TV is face down on a cloth.
KDL-32BX355/40BX455/46BX455 |
iii |
CAUTIONS AND WARNINGS
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
;; Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. ;; If using a chemically pretreated cloth, please follow the instruction provided on the package.
;; Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
;; Periodic vacuuming of the ventilation openings is recommended to ensure proper ventilation.
;; Do Not use paper towels, any type of abrasive pad, rags, rubber or vinyl materials to clean the screen. Using these materials could easily scratch the screen which may result in permanent damage.
;; Do Not use any cleaning product containing alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, ammonia, benzine, thinner or insecticide. Using any of these harsh cleaners may result in permanent damage to the screen.
;; Do Not spray water or detergent directly onto the TV screen . If liquid drips into the bottom of the screen it may cause a failure.
KDL-32BX355/40BX455/46BX455 |
iv |
CAUTIONS AND WARNINGS
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer:
1.Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges.
2.Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors.
3.Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators.
4.Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.
5.Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
6.Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.
7.Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described in “Leakage Test”.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods.
1.A commercial leakage tester.
Follow the manufacturers’ instructions provided with the tester.
2.A battery-operated AC milliammeter.
3.Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale. Nearly all battery-operated digital multimeters that have a 2 VAC range are suitable. (see Figure A)
To Exposed Metal
Parts on Set
AC
0.15 µF Voltmeter
(0.75V)
Earth Ground
Figure A. Use an AC voltmeter to check AC leakage.
HOW TO FIND A GOOD EARTH GROUND
The cover-plate retaining screw on most AC outlet boxes is at earth ground. Verify the AC outlet box retaining screw ground by connecting a 60W to 100W incandescent (not a neon or fluorescent lamp) between the hot side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the lamp should light at normal brilliance if the screw is at ground potential. (see Figure B)
Trouble Light
AC Outlet Box
Figure B. Checking for earth ground.
KDL-32BX355/40BX455/46BX455 |
v |
The AZ3TK chassis is one of several designs for the 2012 model line of Sony Bravia® LCD televisions. This manual covers the following models:
KDL-32BX355
KDL-40BX455
KDL-46BX455
The BRAVIA® Sync™ BX series LED LCD HDTV ●● Brilliant Full HD (1080p) picture quality
●● Four HD inputs for a cable box, PS3™ and more1 ●● Share your pictures on the big screen via USB input ●● Crisp detail & contrast w/ Clear Resolution Enhancer ●● Optimized picture based on what you’re watching
●● Less grain & a clear picture w/ Digital Noise Reduction ●● Theater-like movie viewing with 24p True Cinema
●● One remote for multiple devices with BRAVIA® Sync™2
1.Cables sold separately.
2.Syncs with BRAVIA® Sync or Theatre Sync™ products.
Sistema
Sistema de televisã |
Analógico: NTSC/PAL-M/PAL-N |
|
Digital: SBTVD-T |
Cobertura de cana |
VHF: 2-13 |
|
UHF: 14-69 |
|
CATV: 1-135 |
Sistema do Painel |
Painel LCD (Tela de Cristal Líquido) |
|
|
Potência de saída dos |
8 W + 8 W (127 V CA, THD*1 10% sinal 1 KHz, Alto-falante de 8 Ohms, Nível de entrada |
Alto-falantes (RMS) |
500 mVrms.) |
Entradas/Saídas |
|
CABLE/ANTENNA |
Terminal externo de 75 ohms para entradas RF |
|
|
VIDEO IN 1/2 |
VÍDEO: 1 Vp-p, 75 ohms não balanceados, sincronizacão negativa |
|
ÁUDIO: 500 mVrms (Típico) / Impedância: 47 Kohms |
COMPONENT IN |
YP B PR (Vídeo componente): Y: 1,0 Vp-p, 75 ohms não balanceado, sincronizacão negativa / |
|
PB : 0,7 Vp-p, 75 ohms |
|
PR : 0,7 Vp-p, 75 ohms / Formato do sinal: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
|
ÁUDIO: 500 mVrms (Típico) / Impedância: 47 Kohms |
|
|
HDMI IN 1/2 |
HDMI: Vídeo: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1080/24p |
|
Áudio: Dois canais lineares PCM 32, 44,1 e 48 kHz, 16, 20 e 24bits, Dolby Digital |
|
Entrada do PC |
|
|
AUDIO OUT |
Saída de áudio, Fones de ouvido (minitomada) |
|
|
DIGITAL AUDIO OUT |
Sinal óptico PCM/Dolby Digital |
(OPTICAL) |
|
|
|
PC IN |
D-s ub 15-pin, analógic o R G B , 0,7 Vp-p, 75 ohms , positivo |
|
Consulte o Capítulo de Referência de Sinal de Entrada do PC e HDMI IN |
PC/HDMI IN 1 AUDIO IN |
Minitomada estéreo, 500 mVrms, (Típico) / Impedância: 47 Kohms |
|
|
US B |
Foto, Música e Vídeo |
|
|
*1 Distorcão Harmônica Total.
KDL-32BX355/40BX455/46BX455 |
1 |
SECTION 1 - FEATURES AND OVERVIEW
Nome do modelo |
|
KDL-46BX455 |
KDL-40BX455 |
|
KDL-32BX355 |
||
Energia e outros |
|
|
|
|
|
||
Requisito de energia |
|
110-220 V CA, 60 Hz |
|
|
|
||
|
|
|
|
|
|
|
|
Consumo de energia |
|
187 W |
185 W |
|
109 W |
||
|
|
em uso |
|
|
|||
|
|
|
|
|
|
|
|
|
|
em modo de espera |
|
Menos do que 1 W |
|
|
|
|
|
|
|
|
|
|
|
Tamanho da tela |
(cm) |
Aprox. 116,8 |
Aprox. 101,6 |
|
Aprox. 80,0 |
||
|
|
(polegadasmedidas |
46 |
40 |
|
31,5 (c lasse 32) |
|
|
|
diagonalmente) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Resolucão da tela |
|
1.920 pontos (horizontal) × 1.080 linhas (vertical) |
1.366 pontos (horizontal) × |
||||
|
|
|
|
|
|
|
768 linhas (vertical) |
Alto-falantes/Área total (2)(mm) |
|
40 × 100 |
|
|
|||
|
|
|
|
|
|
||
Dimensões com pedestal (mm) |
1.112 × 713 × 278 |
980 × 639 × 220 |
790 × 534 × 193 |
||||
|
|
|
|
|
|
||
|
|
sem pedestal (mm) |
1.112 × 675 × 97 |
980 × 601 × 94 |
790 × 497 × 91 |
||
|
|
|
|
|
|
||
|
|
padrão do furo de montagem |
300 × 300 |
300 × 300 |
200 × 200 |
||
|
|
da parede |
(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
tamanho do parafuso de |
M6 (comprimento: 8-12mm) |
|
|
||
|
|
montagem da parede |
(mm) |
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
Peso |
c om pedestal (kg) |
20,2 |
15,6 |
|
9,9 |
||
|
|
|
|
|
|
|
|
|
|
sem pedestal (kg) |
17,6 |
14,5 |
|
9,3 |
|
|
|
|
|
|
|
|
|
Acessórios fornecidos |
|
Controle remoto RM-YD081 (1)/Pilhas tamanho AA (2)/Manual de Instrucões (1)/Guia |
|||||
|
|
comum a todos os |
|
Rápido (1)/Folheto de Instrucões de Seguranca (1)/Licenca de Software (1)/Fol heto Ginga |
|||
|
|
|
(1)/Guia de montagem do pedestal (1)/Pedestal (1 conjunto)/ Parafuso (3) |
||||
|
|
modelos |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acessórios opcionais |
|
Cabos de conexão / Kit de cinto de seguranca |
|
|
|||
|
|
|
|
|
|
|
|
•A disponibilidade dos acessórios opcionais depende do estoque.
•Projeto e especi cacões técnicas sujeitos a alteracões sem prévio aviso.
•Os pesos e dimensões são aproximados.
KDL-32BX355/40BX455/46BX455 |
2 |
SECTION 1 - FEATURES AND OVERVIEW
The primary circuits in the AZ3TK chassis consist of a Main Board (A Board), Power Supply Board (G Boards), the IR Board (H Board), the Switch Unit, and the LCD Panel Assembly which includes the TCON Board and the Inverter MT Board.
NOTE: For connector part number information, refer to “Connectors” on page 19. For Wire Dressing information, refer to “Wire Dressing” on page 21.
INV
G
A
SWITCH
UNIT
H
BOARD LAYOUT FOR KDL-32BX355 ONLY
KDL-32BX355/40BX455/46BX455 |
3 |
SECTION 1 - FEATURES AND OVERVIEW
TCON
INV
G
A
SWITCH
UNIT
H
BOARD LAYOUT FOR KDL-40BX455 ONLY
TCON
INV
G
A
SWITCH
UNIT
H
BOARD LAYOUT FOR KDL-46BX455 ONLY
KDL-32BX355/40BX455/46BX455 |
4 |