e 865
e 865 Professional Condenser Vocal Microphone
The E 865 represents the rst condenser microphone in the acclaimed Evolution Series. A live performance, lead vocal microphone, the E 865 easily cuts through high on-stage levels by virtue of its detailed and natural 40 Hz–20 kHz reproduction and superb transient response. Its smooth super-cardioid polar pattern rejects feedback with low, off-axis coloration. The E 865 withstands sound pressure levels of up to 150 dB, and deftly suppresses pop noise. While it picks up the nest sonic nuances, the E 865 is at the same time rugged, bene ting from highquality workmanship and a robust all-metal housing. The microphone ships with a pouch and mic clip.
Features—Benefits
•Metal construction—rugged and reliable
•Hum compensating coil—reduces electrical interference
•Silent on/off switch (e 865-S only)
•Neodynum ferrous magnet with boron—keeps mic stable regardless of climate
•Falcon ring—consistent sound over time
Technical Data
Transducer |
Electret condenser |
Frequency response |
40–20,000 Hz |
Pick-up pattern |
Super-cardioid |
Maximum SPL |
150 dB |
Sensitivity (free eld, no load) |
3 mV/Pa at 1 kHz. nominal |
Nominal impedance at 1 kHz |
200 Ω |
Min. terminating impedance |
1 k W |
Power supply |
12V–48V phantom powering |
Weight (without cable) |
approx. 11 oz. |
Dimensions in inches |
1.9 x 7.72 |
Supplied Accessories
1 protective pouch
1 MZQ 800 microphone clip
Optional Accessories
21' XLR microphone cable |
MC21N |
Grey foam windscreen |
MZW 4032 |
Floor stand with boom arm |
SEMS 3000 |
Architect’s Specifications
The microphone shall be an eletret condenser microphone operating in the frequency range of 40–20,000 Hz. It shall have a super-cardioid pick up pattern with 3 mV/Pa at 1 kHz. nominal sensitivity. The maximum SPL shall be 150 db, and the nominal impedance at 1 kHz shall be 200 Ω. The unit shall be powered by a 12–48V phantom power unit. The unit shall be
1.9 x 7.72 inches and weight approx. 11 oz. The unit shall be a Sennheiser e865 microphone.
e 865