Schneider Electric Industrial Actuators Catalog

Rev: 11/2012

Industrial Electric Actuators

Featured Actuators

Featured

Industrial Actuators

24V and 120V, On/Oﬀ and Modulating

Series 92/93

Up to 30,000 lb. in.

Pneumatic Double Acting

and Spring Return

Series 70

600 to 18,000 lb. in.

AU Series

21,000 to 70,000 lb. in.

On/Oﬀ and Modulating

Industrial Actuators

11/2012

IA-2

Industrial Actuators

Series 70

Industrial Electric Actuators

The Bray Series 70 Electric Actuator provides a rugged, compact industrial actuator solution to a wide range of quarter turn applications including butterﬂy valves, ball valves, and dampers. Available in torque outputs from 600 to 18,000 lb. in. (68 to 2033 Nm), these actuators mount directly to Bray and other industry standard butterﬂy valves without the need for brackets and linkages. The manual declutchable override handwheel is standard on all Bray Series 70 actuators, providing end

user convenience in installation, commissioning

and service.

Industrial Electric Actuators

Series 70 - Features and Benefits

On/Oﬀ and modulating models are available in 24, 110 and 220 VAC. The standard enclosure is NEMA 4x and IP65 rated with an industrial polyester ﬁnish, making the Series 70 the ideal choice for cooling tower valves and other outdoor applications. The advanced Servo Pro modulating control card assures compatibility with virtually any analog control signal used in today’s building automation and temperature control systems.

FEATURES BENEFITS

Compact design and direct mounting

UL, CSA and CE approved (most models)

High visibility beacon position indicator

Industrial Actuators

Internal isolation relays

Manual declutchable override handwheel

Fits in tight spaces, installs easily

Assures universal application acceptability

Assists in ﬁeld operation

Allows parallel wiring of multiple actuators from a single control output

Allows manual positioning without disconnecting power

IA-3

Advanced Servo Pro modulating option

Optional battery backup on 24 VAC models

Provides on-board diagnostics and user adjustable options including control signal type, speed controls and other features.

Assures return to a predetermined position upon loss of power supply

11/2012

MODEL SELECTION

Industrial Electric Actuators

Series 70 - Non-Spring Return

Industrial Actuators

Model Number

70-24-0061

70-24-0061H

70-24-0061SV

70-24-0061SVH

70-0061

70-0061H

70-0061SV

70-0061SVH

70-0121

70-0121H

70-0121SV

70-0121SVH

70-24-0201

70-24-0201H

70-24-0201SV

70-24-0201SVH

70-0201

70-0201H

70-0201SV

70-0201SVH

Feature

in/lbs.

Torque Output

600 600 600 600 600 600 600 600

1200 1200 1200 1200 2000 2000 2000 2000 2000 2000 2000 2000

24 VAC

120 VAC

On/Oﬀ

Modulating

Heater

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

Aux. Switches

Model Number

70-0301

70-0301H

70-0301SV

70-0301SVH

70-24-0501

70-24-0501H

70-24-0501SV

70-24-0501SVH

70-0501

70-0501H

70-0501SV

70-0501SVH

70-0651

70-0651H

70-0651SV

70-0651SVH

70-1300

70-1300H

70-1300SV

70-1300SVH

70-1800

70-1800H

70-1800SV

70-1800SVH

Feature

in/lbs.

Torque Output

3000 3000 3000 3000 5000 5000 5000 5000 5000 5000 5000 5000 6500 6500 6500

6500 13,000 13,000 13,000 13,000 18,000 18,000 18,000 18,000

24 VAC

120 VAC

On/Oﬀ

Modulating

Heater

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

• • •

• • • •

Aux. Switches

Application Note:

Use Series 70 actuators only to control equipment under normal operating conditions. Where failure or malfunction of the electric actuator could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the electric actuator.

11/2012

Industrial Actuators

IA-4

Industrial Actuators

Industrial Electric Actuators

Specifications - Series 70

SPECIFICATIONS

Industrial electric actuators shall include manual declutchable override handwheel and high visibility position indication. Motors shall be continuous duty. Enclosure shall be NEMA 4X, IP 65 rated. Actuator shall conform to ISO 5211 standards for direct mounting onto quarter turn valves. On/Oﬀ actuators shall be equipped with internal isolation relays to allow parallel wiring of multiple units. Modulating actuators shall be equipped with a microprocessor-based servo control with on-board diagnostics. Actuator shall be UL, CSA and CE approved. Actuators shall be Bray Series 70 or approved equal.

Model

70-24-0061 24 VAC 600 45 sec. 1.8 70-24-0201 24 VAC 2000 60 sec. 2.0 70-24-0501 24 VAC 5000 60 sec. 3.0 70-0061 120 VAC 600 30 sec. 1 1.4 70-0121 120 VAC 1200 30 sec. 0.78 2.1 70-0201 120 VAC 2000 30 sec. 1 2.1 70-0301 120 VAC 3000 30 sec. 1.2 3.0 70-0501 120 VAC 5000 30 sec. 1.6 3.0 70-0651 120 VAC 6500 30 sec. 2.3 3.1 70-1300 120 VAC 13000 110 sec. 2.3 3.1 70-1800 120 VAC 18000 110 sec. 2.5 3.1

Motor Duty Cycle Continuous Duty

Aux Switches 10A (1/3 HP) @ 120 VAC (Two SPDT) 10A (1/2 HP) @ 220 VAC

Heater (Optional) 24V Models 5 Watt, PTC style, self regulating

Voltage

120 V Models 5 Watt, PTC style, self regulating

Torque Stroke

(lb. in.) Time Full Load Locked Rotor

Current Draw (Amps)

Servo Control Input 0 to 10 VDC, 2 to 10 VDC, 0 to 5 VDC, 4 to 20 mA (Modulating Models) Input Impedance Voltage: 1000K Ohms; Current: 250 Ohms

Housing Die Cast Aluminum, Polyester Finish

Industrial Actuators

Conduit Entries (2) 70-0061, 1/2" NPT

Terminal Strip On/oﬀ Models, 12 to 22 AWG

Ambient Temperature -20 to 150F (-29 to 65C)

Agency Listings (120V) UL, CE, CSA

The performance speciﬁcations are nominal and conform to acceptable industry standards. For application at conditions beyond these speciﬁcations, consult the nearest Bray oﬃce. Bray controls shall not be liable for damages resulting from misapplication or misuse of its products.

IA-5

NEMA 4X, IP 65

All Other Models, 3/4" NPT

Modulating Models, 14 to 24 AWG

11/2012

Industrial Electric Actuators

Industrial Actuators

Wiring - Series 70

WIRING

Note: Use this Series 70 Electric Actuator only to control equipment under normal operating conditions. Where failure or malfunction of the electric actuator could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices such as supervisory or alarm systems or safety or limit controls intended to warn of, or protect against, failure or malfunction of the electric actuator.

Note: Do not install or use the Series 70 Electric Actuator in or near environments where corrosive substances or vapors could be present. Exposure of the electric actuator to corrosive environments may damage the internal components of the device, and will void the warranty.

SINGLE PHASE POWER SUPPLY

120 VAC ON/OFF WIRING

FIELD WIRING

CLOSE N.O.

(VOLTAGE FREE)

OPEN N.O.

(VOLTAGE FREE)

FOR HEATER OPTION ONLY

OPEN

ACTUATOR

OPEN

O C

MOTOR

GROUND

AUX SWITCH CLOSE

(VOLTAGE FREE)

AUX SWITCH OPEN

(VOLTAGE FREE)

SINGLE PHASE

POWER SUPPLY

INCOMING COMMAND SIGNAL

+ 5 VDC AT 50 mA (RESISTIVE CONTROL)

NEUTRAL

LIVE

GROUND

POSITION

FEEDBACK

DEVICE

LOAD DEVICE

NOT TO EXCEED

500 OHM

FIELD WIRING ACTUATOR

BLUE

RED

YELLOW OR

BLACK

CLOSE N.O.

(VOLTAGE FREE)

OPEN N.O.

(VOLTAGE FREE)

24 VAC

SINGLE PHASE

POWER SUPPLY

GROUND

120 VAC MODULATING WIRING

N.O.

NOTE: 24 VAC SERVO HAS 2 TERMINALS ONLY

CALIBRATE

OUTGOING FEEDBACK SIGNAL

24 VAC ON/OFF WIRING

INPUT (-)

INPUT (+)

+5 VDC

OUTPUT (-)

OUTPUT (+ )

HIGH VOLTAGE

MOTOR CLOSE

MOTOR OPEN

NEUTRAL

LINE

POWER

OPEN

OFF

OPEN

SPEED

FUSE

7 8910

SPEED

PRO

FACTORY

DEAD BAND

SERVO

HEATER

FOR HEATER OPTION ONLY

MOTOR

1 234 5 6

STATUS

COM

FB POT

CONTROL BO X

COM

OPEN

COMMON

HANDWHEEL

TORQUE LIMIT

COM

OPEN

COMMON

CLOSE LIMIT

OPEN LIMIT

WHITE

BLACK

Industrial Actuators

11/2012

IA-6

Industrial Actuators

Industrial Electric Actuators

Wiring - Series 70

WIRING

AUX SWITCH CLOSE

(VOLTAGE FREE)

AUX SWITCH OPEN

(VOLTAGE FREE)

24 VAC

POWER

{

SUPPLY

POSITIVE INCOMING COMMAND SIGNAL

24 VAC 3WIRE MODULATING

N.O.

NEUTRAL

LIVE

GROUND

+ 5 VDC AT 50 mA

(RESISTIVE CONTROL)

POSITION

FEEDBACK

DEVICE

LOAD DEVICE

NOT TO EXCEED

500 OHM

OUTGOING FEEDBACK SIGNAL

Notes:

1. Command signal and feedback wires MUST be shielded and grounded for proper servo operation.

SERVO

DEAD BAND

HEATER

1 234 5 6

STATUS

COM

FB POT

CONTROL BOX

COM

OPEN

COMMON

HANDWHEEL

TORQUE LIMIT

COM

OPEN

COMMON

CLOSE LIMIT

OPEN LIMIT

CALIBRATE

INPUT (-)

INPUT (+)

+5 VDC

OUTPUT (-)

OUTPUT (+)

MOTOR CLOSE

MOTOR OPEN

NEUTRAL

LINE

POWER

OPEN

SPEED

FUSE

7 8910

SPEED

PRO

2. The command signal input (-) terminal is internally connected to the servo neutral terminal. DO NOT connect the live to the neutral terminal on the servo.

The 24 V Servo Pros (Revision J) can be wired 3 or 4 wire conﬁgured

Industrial Actuators

INCOMING COMMAND SIGNAL

AUX SWITCH CLOSE

(VOLTAGE FREE)

AUX SWITCH OPEN

(VOLTAGE FREE)

24 VAC POWER SUPPLY

+ 5 VDC AT 50 mA (RESISTIVE CONTROL)

NOT TO EXCEED

24 VAC 4WIRE MODULATING

NEUTRAL

LIVE

{

GROUND

POSITION

FEEDBACK

DEVICE

LOAD DEVICE

500 OHM

{

N.O.

OUTGOING FEEDBACK SIGNAL

SERVO

DEAD BAND

HEATER

1 234 5 6

STATUS

COM

FB POT

CONTROL BOX

COM

OPEN

COMMON

HANDWHEEL

TORQUE LIMIT

COM

OPEN

COMMON

CLOSE LIMIT

OPEN LIMIT

CALIBRATE

INPUT (-)

INPUT (+)

+5 VDC

OUTPUT (-)

OUTPUT (+)

MOTOR CLOSE

MOTOR OPEN

NEUTRAL

LINE

POWER

OPEN

SPEED

FUSE

7 8910

SPEED

PRO

IA-7

11/2012

DIMENSIONS

SERIES 70 ACTUATOR DIMENSIONS

ACTUATOR

MODEL

NUMBER

S70-0061

S70-0121

S70-0201

S70-0301

S70-0501

S70-0651

S70-1300

S70-1800

Dimensions are in Inches [Millimeters in brackets]

A B C D E F G H J

7.5

5.6

3.0

5.1

[191]

[142]

[76]

[130]

10.1

7.8

3.7

6.5

[257]

[198]

[94]

[165]

12.1

9.5

5.6

7.2

[307]

[241]

[142]

[183]

12.1

9.5

6.0

12.5

[307]

[241]

[152]

[317]

70-0061 to 70-0651

Allow 5.0 [127] For Cover Removal

Industrial Electric Actuators

Dimensions - Series 70

Please reference illustration below

(UNC)

x B.C.

[51]

[66]

[79]

[211]

5/16-18 x ø2.76

F07

5/16-18 x ø2.76

F07

1/2-13

x ø4.92

F12

1/2-13

x ø4.92

F12

1.9

[48]

2.5

[64]

2.9

[74]

8.1

[206]

1.94

[49.3]

2.69

[68.3]

3.19

[81]

9.2

[234]

.19

[4.8]

.56

[14.2]

.56

[14.2]

.56

[14.2]

1/2‡2.0

3/4‡2.6

3/4‡3.1

3/4‡8.3

(UNC)

x B.C.

—

1/2-13

x ø4.92

F12

3/4-10

x ø6.50

F16

3/4-10

x ø6.50

F16

Industrial Actuators

N P Q S T U

.75

.51

[19]

[13]

1.18

.87

[30]

[22]

See Detail A1

See Detail A2

øR

1.75

3.5

[44]

[89]

2.20

[56]8[203]

[305]

_ _ _

6.1

12.7

[155]

[323]8[203]

Wt.

lbs

[kgs]

[6]

[13]

[22]

118

[54]

1.60 [41]

1.25 [32]

Typically .78

[20]

Holes For #10-24 UNC or M5 4 Places

70-1300 to 70-1800

Holes For #10-24 UNC [M5]

Allow 5.0 for

Cover Removal

1.25 [32]

3.00 [76]

H NPT Conduit Entry 2 Places

.60 For Override

[15] Engagement

øA

Typically 4 Places

øA

Detail A1 - Output Bore

(Series 70-030,

050, 065 Only)

.47

[12]

øN x Q Deep

ø1.97 x 2.6 Deep

[50 x 66]

Typically 4 Places

øR

Typically .78

[20]

Max Stem

H NPT Conduit Entry 2 Places

3.00 [76]

5.4

Entry

Typically 4 Places

Detail A2 - Output Bore

øR

2.38 [60]

.47 [12]

1.97 [50]

3.05

[77.9]

S70-130/180S70-131/181

[15.8]

Typically 4 Places

.62

2.50

[62.7]

Industrial Actuators

IA-8

11/2012

+ 18 hidden pages

Schneider Electric Industrial Actuators Catalog

Specifications and Main Features

Frequently Asked Questions

User Manual