Schneider Electric ION8650 Datasheet

ADVANCED UTILITY METERING FUNCTIONS AND CHARACTERISTICS

ION8650 series Technical Datasheet (US)

Providing high accuracy and a wide range of features for transmission and distribution metering, the PowerLogic ION8650 advanced revenue and power quality meter has the ﬂexibility to change along with your needs. The meter provides the tools necessary to:

• Manage energy procurement and supply contracts

• Perform network capacity planning and stability analysis

• Monitor power quality compliance, supply agreements, and regulatory requirements

Applications

• Transmission and distribution metering

• Revenue metering

• Extensive power quality monitoring and analysis

• Power quality compliance monitoring

• Digital fault recording

• Instrument transformer correction

PB107500

Version: 1.0 - 22/03/2021

PLSED310027EN_US

ION8650

ADVANCED UTILITY METERING FUNCTIONS AND CHARACTERISTICS

The solution for

Markets that can beneﬁt from a solution that includes PowerLogic ION8650 series meters:

• Transmission networks

• Distribution network

Beneﬁts

• Reduce operations costs

• Improve power quality

• Improve continuity of service

Competitive advantages

• Be integrated into existing wholesale settlement system

• Be able to use Power Monitoring Expert software for data

analysis or share operation data with SCADA systems through multiple communication channels and protocols

• Transformer/line loss compensation

• Instrument transformer correction

Power management solutions

Schneider Electric provides innovative power management solutions to increase your energy efﬁciency and cost savings, maximise electrical network reliability and availability, and optimise electrical asset performance.

Conformity of standards

• IEC 62053-22/23

• IEC 61000-4-30

• EN 50160

• IEC 61000-4-7

• IEC 61000-4-15

• IEEE 1159

• IEEE 519

• IEC 61000-4-2

• IEC 61000-4-3

• IEC 61000-4-4

• IEC 61000-4-5

• IEC 61000-4-6

• IEC 61000-4-12

• CISPR 22

• IEC 62052-11

• IEC 60950

• ANSI C12.20

Version: 1.0 - 22/03/2021

PLSED310027EN_US

ADVANCED UTILITY METERING FUNCTIONS AND CHARACTERISTICS

Main characteristics

Used to monitor electric energy provider networks, service entrances and

PB107500

substations, PowerLogic ION8650 meters are ideal for independent power producers and cogeneration applications that need to accurately measure energy bi-directionally in both generation and stand-by modes. These meters give utilities the tools to manage complex energy supply contracts that include commitments to power quality. Integrate them with our EcoStruxure™ Power Monitoring operations software or other energy management and SCADA systems through multiple communication channels and protocols, including Itron MV-90, Modbus, DNP, DLMS, IEC 61850 Ed. 3.

Applications

• Revenue metering.

PowerLogic ION8650 socket meter

• Cogeneration and IPP monitoring.

• Compliance monitoring.

• Power quality analysis.

• Demand and power factor control.

• Load curtailment.

• Equipment monitoring and control.

• Energy pulsing and totalisation.

• Instrument transformer correction.

• Outage Notiﬁcation

Feature selection

Commercial reference number

S8650A

S8650B

S8650C

ION8650 meters

ION8650A

ION8650B

ION8650C

Main characteristics

• ANSI Class 0.1 and IEC 62053-22/23 Class 0.2 S metering

– For interconnection points on medium, high, and ultra-high voltage

networks; twice as accurate as current IEC and meets ANSI Class standards over all conditions and including single wide range current measurement.

• Power quality compliance monitoring

– Monitor compliance with international quality-of-supply standards (IEC

61000-4-30 Ed. 3 Class A/S, EN 50160 Ed. 4, IEC 61000-4-7, IEC 61000-415, IEEE 1159, IEEE 519). Also detects disturbance direction.

• Digital fault recording

– Simultaneous capture of voltage and current channels for sub-cycle

disturbance.

• Complete communications

– Multi-port, multi-protocol ports including serial, infrared, modem and

ethernet. Simultaneously supports multiple industry standard protocols including: Itron MV-90, Modbus, Modbus Master, DLMS, DNP 3.0 and IEC 61850 Ed. 2.

• Multiple tariffs and time-of-use

– Apply tariffs, seasonal rate schedules to measure energy and demand

values for time periods with speciﬁc billing requirements.

• Multiple setpoints for alarm and functions

– Use up to 65 setpoints for single/multi-condition alarms and I/O functions

with response times down to 1/2 cycle.

• Multiple setpoints for alarm and functions

– Use up to 65 setpoints.

• Instrument transformer correction

– Save money and improve accuracy by correcting for less accurate

transformers.

• Alarm notiﬁcation via email

– High-priority alarms, data logs sent directly to the user’s PC. Instant

notiﬁcation of power quality events by email.

• Cyber security enhancements

– Assign communication admin rights to selected user; prevention measures

ensure no loss of security logs; support syslog for external security.

Version: 1.0 - 22/03/2021

PLSED310027EN_US

ADVANCED UTILITY METERING FUNCTIONS AND CHARACTERISTICS

PE86302-95

PowerLogic ION8650 switchboard meter.

1 Terminals 2 Optical port 3 Main display status bar 4 Watt LED 5 Navigation, ALT/Enter buttons 6 VAR LED 7 Nameplate label 8 Demand reset switch

PE86002

Disturbance waveform capture and power quality report

Selection guide

ION8650 AION8650 BION8650

General

Use on LV, MV and HV systems

Current accuracy

Voltage accuracy

Power accuracy

Samples/cycle

b b b

0.1 % 0.1 % 0.1 %

1024 1024 1024

Instantaneous values

Current, voltage, frequency

Active, reactive, apparent power Total & per phase

Power factor Total & per phase

Current measurement range

b b b b b b b b b

0 A - 20 A 0 A - 20 A 0 A - 20 A

Energy values

Active, reactive, apparent energy

Settable accumulation modes

b b b b b b

Demand values

Current

Active, reactive, apparent power

Predicted active, reactive, apparent power

Synchronisation of the measurement window

Demand modes: Block (sliding), thermal (exponential)

Present & max value s

Present & max values

b b b b b b b b b b b b b b b

Power quality measurements

Harmonic distortion Current & voltage

Individual harmonics Via front panel

Waveform / transient capture

Harmonics: magnitude, phase, and interharmonics

Detection of voltage sags and swells

IEC 61000-4-30 class A / S

IEC 61000-4-15 (Flicker)

High speed data recording (down to 10 ms)

EN 50160 compliance reporting

Programmable (logic and math functions)

b b b

63 63 31

b / b - / b - / -

50 40 -

b b b

A S

b b b b b b b b b

Data recording

Onboard Memory (in Mbytes)

Revenue logs

Event logs

Historical logs

Harmonics logs

Sag/swell logs

Transient logs

Time stamping to 1 ms

GPS synchronisation (IRIG-B standard)

128 64 32

b b b b b b b b b b b b b b b b

- -

b b b b b b

Display and I/O

Front panel display

Wiring self-test (requires PowerLogic ION Setup)

Pulse output (front panel LED) Digital or analogue inputsg (max)

Digital or analogue outputsg (max, including pulse output)

b b b b b b

2 2 2

11 11 11

16 16 16

Communication

Infrared port

RS-485 / RS-232 port

RS-485 port

Ethernet port (Modbus/TCP/IP protocol) with gateway

Internal modem with gateway (ModemGate)

HTML web page server

IRIG-B port (unmodulated IRIG B00x time format)

Modbus TCP Master / Slave (Ethernet port)

Modbus RTU Master / Slave (Serial ports)

DNP 3.0 through serial, modem, and I/R ports

Cell modem option (LTE)

DLMS COSEM through serial, Ethernet and optical ports for all variants

With optional I/O Expander.

For 9S, and 36S only. For 35S system up to 480 V L-L.

ggg

C model limited to IR + 2 other ports at one time. Ports can be enabled/disabled by user.

1 1 1

b b b

1 1 1

b / b

b / b b / b

b b b b b b

b b b

ggg

- / b

Version: 1.0 - 22/03/2021

PLSED310027EN_US

+ 7 hidden pages

Schneider Electric ION8650 Datasheet

Specifications and Main Features

Frequently Asked Questions

User Manual