Panasonic CT-30WX54U, CT-30WC14UJ, CT-30WX54J, CT-30WC14J, CT-30WC14U User Manual

HDTV Monitor

Operating Instructions

Monitor de Alta Definición Instrucciones de Operación

Écran à haute définition Manuel d’utilisation

CT-30WC14

CT-30WX54

CT-34WX54

TQB2AA0496 40407

PRINTED IN USA

IMPRESO EN EE.UU

IMPRIMÉ AUX ÉTATS-UNIS

ENGLISH

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

The Class II insulation symbol (square within a square) indicates that this product has been evaluated and tested to comply with Class II insulation requirements.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. DO NOT PLACE ANY OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS APPARATUS.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Read these instructions completely before operating television.

Contents are subject to change without notice or obligation.

Copyright 2004 by Matsushita Electric Corporation of America. All rights reserved.

Unauthorized copying and distribution is a violation of law.

IMPORTANT INFORMATION

Important Information

FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.

ENVIRONMENTAL NOTICE: THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

The Energy Star label, a symbol for energy efficiency, was created by the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) to help customers identify products that can save them money and protect the environment by saving energy. Energy Star compliant products generally consume less energy than similar standard products.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 5510752 and

5736897. BBE and BBE symbol are registered trademarks of BBE

High Definition Sound

Sound, Inc.

BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism.

HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ENGLISH

Important Information Regarding the Use of Video Games, Computers, or Other Fixed Image Displays

WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an operating defect and as such is not covered by Warranty.

The television is designed to display constantly moving images on the screen. Continuous viewing of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), nonexpanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.

The extended use of fixed image program material can cause permanent picture tube damage, shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be limited by performing the following steps:

•Limit the display of fixed image program material to no more than 15% of total viewing time per week.

•Turn the power off when not in use.

1 z

ENGLISH

IMPORTANT INFORMATION

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B Digital Device in accordance with the specifications in Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against radio and television interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio or television reception (which you can determine by turning the equipment off and on), try to correct the interference by one or more of the following measures.

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

2 z

TABLE OF CONTENTS

Table of Contents
Important Information .....................................	1
Information Regarding The Use Of Video Games
Computers, Or Other Fixed Image Displays............	1
FCC Information .........................................................	2
Customer Record........................................................	4
Care and Cleaning......................................................	4
Specifications..............................................................	4
Feature Chart..............................................................	4
Installation........................................................	5
Television Location .....................................................	5
Optional Cable Connections .......................................	5
AC Power Supply Cord...............................................	5
Cable / Antenna Connection.......................................	5
Remote Control Battery Installation ............................	5
Initial Set Up Menu...........................................	6
Optional Equipment Connections..................	7
VCR ...........................................................................	7
Cable Box ..................................................................	7
VCR and Cable Box...................................................	7
Front Control Panel.....................................................	8
Amplifier (TO AUDIO AMP) ........................................	8
Digital TV - Set-Top Box (DTV-STB) or DVD Players	8
Program Out connection.............................................	9
HDMI (High Definition Multimedia Interface) input
connection ...............................................................	9
Special Features .............................................	10
ASPECT Button ..........................................................	10
BBE Button .................................................................	10

SAP Button.................................................................	10
Split Operation............................................................	10
Split Operation with Cable Box...................................	10
Split Operational Buttons............................................	11
Split CTRL Button ...................................................	11
TV/Video Button......................................................	11
Search Button .........................................................	11
Freeze Button .........................................................	11
Main Picture Freeze Feature ..................................	11
Direct Video Input Selection .......................................	11
Remote Control Operation ............................	12
Operating Components with Remote Control.............	13
Programming the Remote Control..............................	15
Programming Without a Code ....................................	15
Component Codes .....................................................	15
Basic Menu Navigation.................................	18
Icon Menus Operation ..................................	19
Picture ........................................................................	19
Audio ..........................................................................	19
Channels ....................................................................	20
Timer ..........................................................................	21
Lock............................................................................	21
V-Chip Set...............................................................	21
Set Up ........................................................................	24
Troubleshooting Chart .................................	26
Index...............................................................	27

ENGLISH

Note: The warranty and service center information is located in the back of this manual.

3 z

ENGLISH

CONGRATULATIONS

Congratulations

Your new Panasonic Tau Television features state-of-the- art technology for high quality picture and sound with complete audio/video connections for your home theater system. Your TV is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product are located on the back of the TV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss. Product registration for U.S. customers is available at: www.prodreg.com/panasonic.

Model

Number

Serial

Number

Care and Cleaning

Screen (Turn TV Off)

•Use a mild soap solution or window cleaner and a clean cloth.

•DO NOT USE ABRASIVE CLEANERS.

•Avoid excessive moisture and wipe dry.

Warning: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

•For cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and wipe dry.

•Do not use benzene, thinner or other petroleum based products.

Specifications

Specifications are subject to change without notice or obligation.

	Power Source
	CT-30WC14	(3.6A)	120V AC, 60Hz
	CT-30WX54	(3.6A)
	CT-34WX54	(3.6A)
	Channel Capability - 181		VHF-12; UHF-56; Cable-113
	Video Input Jacks		1Vp-p, 75 Ohm, Phono Jack Type
	Audio Input Jacks		500mV RMS 47K Ohm
	Video out jack		1Vp-p, 75 Ohm, Phono Jack Type
	Audio Output Jacks		0-2.0V RMS 4.7K Ohm
	HDMI/HDCP Input jack		Type A
	Component Input (Y / PB / PR)		75 Ohm, Phono Jack Type
	S-Video Input Jacks		S-Video (Y-C) Connector

Feature Chart

	MODELS	30WC14-CT	30WX54-CT	34WX54-CT
	FEATURES
	MENU LANGUAGE	•	•	•
	ENG/SPAN/FR
	2 TUNER SPLIT SCREEN	•	•	•
	CLOSED CAPTIONING	•	•	•
	V-CHIP CAPABILITY	•	•	•
	DIGITAL SCAN RATE	1080i,	1080i,	1080i,
		480p	480p	480p
	NTSC LINE-DOUBLER	480p	480p	480p
	VIDEO NORM	•	•	•
	AUDIO NORM	•	•	•
	STEREO	•	•	•
	AI SOUND	•	•	•
	BASS/BALANCE/TREBLE	•	•	•
	SURROUND	•	•	•
	BBE	•	•	•
	FAO/VAO	FAO	•	•
	A/V IN (REAR/FRONT)	3	4	4
		(2/1)	(3/1)	(3/1)
	AUDIO OUT	•	•	•
	HDMI/HDCP INPUT	•	•	•
	S-VHS INPUT	•	•	•
	COMPONENT INPUT	1	2	2

4 z

Incoming Cable from Home Antenna

75 Ohm VHF/UHF on back of TV

Incoming Cable from Cable Company

Installation

Television Location

This unit can be used as part of an entertainment center. Consult your dealer for available options.

•Avoid excessive sunlight or bright lights, including reflections.

•Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.

•Fluorescent lighting may reduce remote control transmitting range.

•Keep away from magnetic equipment, including motors, fans and external speakers.

WARNING: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. In order to

avoid injury to children, never place your television receiver on a piece of furniture that is capable of being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it. A falling television can cause serious injury or even death.

CT-30WC14, CT-30WC14U:

CAUTION: These television receivers for use only with PANASONIC TY-30WX54T stand. Use with other carts (or stands) is capable of resulting in instability causing possible injury.

CT-30WX54, CT-30WX54U:

CAUTION: This television receiver for use only with PANASONIC TY-30WX54T stand. Use with other carts (or stands) is capable of resulting in instability causing possible injury.

CT-34WX54, CT-34WX54U:

CAUTION: This television receiver for use only with PANASONIC TY-34WX54T stand. Use with other carts (or stands) is capable of resulting in instability causing possible injury.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

•Use 75-ohm coaxial shielded cables.

•Use appropriate input and output connectors, that match your component connectors.

•Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT

OF AC OUTLET AND FULLY INSERT. DO NOT Polarized plug USE A PLUG WITH A RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

INSTALLATION

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company. Tighten with fingers only. Use of any tool (e.g. pliers) for tightening may result in tuner damage.

Note: A cable converter box may be required for proper reception. Check with your local cable company for compatibility requirements.

Antenna Connection

For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.

• Connect home antenna to ANT connection on back of television.

Note: Cable Mode is preset at the factory.

Remote Control Battery Installation

Requires two AA batteries (supplied).

Battery Polarity

5A.
1 /	AA
AA / 1.
5A

1

2

3

Procedure

1.Turn the remote control face down. Remove battery cover by pressing down on the marking on the cover and sliding it off in the direction indicated.

2.Install batteries matching (+) and (-) polarity signs.

3.Replace the battery cover by sliding in reverse until the lock snaps.

Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote Control.

Precautions

•Replace batteries in pairs.

•Do not mix battery types (zinc carbon with alkaline).

•Do not recharge, heat, short-circuit, disassemble, or burn batteries.

ENGLISH

5 z

ENGLISH

INITIAL SET UP MENU

Initial Set Up Menu

For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures for setting up the features.

IDIOMA/LANGUE

To change menu language to ENGLISH, SPANISH or FRENCH.

Procedure

•Press VOL to select English, Spanish or French.

FIRST PLEASE

CONNECT THE ANTENNA

INITIAL SET UP

IDIOMA/LANGUE ENGLISH

MODE	CABLE
AUTO PROGRAM
GEOMAGNETIC CORRECTION
TILT CORRECTION

PRESS ACTION TO EXIT

MODE

To select TV (antenna) or CABLE mode depending on the signal source.

Procedure

•Press VOL to select TV or CABLE.

FIRST PLEASE

CONNECT THE ANTENNA

INITIAL SET UP
IDIOMA/LANGUE	ENGLISH
MODE	CABLE

AUTO PROGRAM

GEOMAGNETIC CORRECTION

TILT CORRECTION

PRESS ACTION TO EXIT

AUTO PROGRAM

To automatically program all channels with a signal.

Procedure

•Press VOL to start Auto Programming.

FIRST PLEASE

CONNECT THE ANTENNA

INITIAL SET UP
IDIOMA/LANGUE	ENGLISH
MODE	CABLE
AUTO PROGRAM

GEOMAGNETIC CORRECTION

TILT CORRECTION

PRESS ACTION TO EXIT

GEOMAGNETIC CORRECTION

This feature is used to adjust discoloration of the picture due to the earth’s magnetic field in the area.

Procedure

•Press VOL to display adjustment menu.

•	Press	VOL or VOL		to adjust discoloration in
	picture.
	FIRST PLEASE
	CONNECT THE ANTENNA
				GEOMAGNETIC CORRECTION
	INITIAL SET UP			0 - - - - - - - - - l - - - - - - - - -
IDIOMA/LANGUE		ENGLISH
MODE		CABLE
AUTO PROGRAM				TO ADJUST
GEOMAGNETIC CORRECTION
				PRESS ACTION TO EXIT
TILT CORRECTION
	PRESS ACTION TO EXIT

TILT CORRECTION

This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.

FIRST PLEASE
CONNECT THE ANTENNA			TILT CORRECTION
				0
INITIAL SET UP
IDIOMA/LANGUE	ENGLISH
MODE	CABLE
AUTO PROGRAM			TO ADJUST
GEOMAGNETIC CORRECTION			PRESS	ACTION
TILT CORRECTION			TO	EXIT
PRESS ACTION TO EXIT

Procedure

•Press VOL to display adjustment menu.

• Press VOL or VOL to adjust picture tilt.

6 z

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections

Note: The remote control must be programmed with supplied codes to operate the optional equipment.

VCR Connection

Follow this diagram when connecting your television to a VCR only.

VCR
		TERMINALS ON BACK OF TELEVISION
VIDEO OUT		HDMI
		AV IN
		VIDEO
L		Y
AUDIO OUT
R		PB	S-VIDEO
ANT IN ANT OUT			VIDEO
		PR
	ANT	L	L
		AUDIO
		IN

R

R

	Incoming	1	2	INPUT	INPUT	INPUT	PROG
	Cable							TO AUDIO
		COMPONENT		1	2	3	OUT
		VIDEO INPUT						AMP

CABLES NOT INCLUDED

Note: Rear A/V jacks diagram may vary, depending on model. Please refer to the FEATURE CHART on page 4 for your model’s capabilities.

Viewing a television program Procedure

• Tune the television to the program you want to view.

Viewing a video

Procedure

Option A

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Begin the video.

Option B

•Tune the television to Channel 3 or 4, depending on your VCR.

•Begin the video.

Recording a television program

Procedure

Option A (Recording and viewing the same program)

•Tune the television to Channel 3 or 4, depending on your VCR.

•Using the VCR, tune to the television program you want to record.

•Begin recording.

Option B (Recording one program while viewing another program)

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Using the VCR, tune to the television program you want to record.

•Begin recording.

•Press the TV/VIDEO button on the remote control to switch back to TV mode.

•Tune the television to the program you want to view.

Cable Box Connection

Follow this diagram when connecting your television to a cable box only.

			TERMINALS ON BACK OF TELEVISION
			HDMI
			AV IN
CABLE BOX			VIDEO
			Y
	15
ANT IN	ANT OUT		PB	S-VIDEO
				VIDEO
			PR
			L	L
		ANT
			AUDIO
Incoming			IN	R
Cable			R

	1	2	INPUT	INPUT	INPUT	PROG	TO AUDIO
	COMPONENT		1	2	3	OUT
	VIDEO INPUT						AMP

CABLES NOT INCLUDED

Note: Rear A/V jacks diagram may vary, depending on model. Please refer to the FEATURE CHART on page 4 for your model’s capabilities.

Viewing a premium (scrambled) cable channel

Procedure

•Tune the television to Channel 3.

•Using the cable box, tune to the premium cable channel you want to view.

VCR and Cable Box Connection

Follow this diagram when connecting your television to both a VCR and a cable box.

VCR
		TERMINALS ON BACK OF TELEVISION
VIDEO OUT
		HDMI
		AV IN
L		VIDEO
AUDIO OUT		Y
R
		PB
ANT IN ANT OUT			S-VIDEO
			VIDEO
		PR
	ANT	L	L
		AUDIO
		IN	R
		R

	1	2	INPUT	INPUT	INPUT	PROG	TO AUDIO
	COMPONENT		1	2	3	OUT
	VIDEO INPUT						AMP

ANT OUT ANT IN

CABLES NOT INCLUDED

CABLE BOX

15

Incoming

Cable

Note: Rear A/V jacks diagram may vary, depending on model. Please refer to the FEATURE CHART on page 4 for your model’s capabilities.

Viewing a premium (scrambled) cable channel

Procedure

•Tune the television to Channel 3.

•Using the cable box, tune to the premium cable channel you want to view.

ENGLISH

7 z

ENGLISH

OPTIONAL EQUIPMENT CONNECTIONS

VCR and Cable Box Connection (Cont.)

Recording a premium (scrambled) cable channel

Procedure

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Turn the VCR ON.

•Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.

•Using your cable box, tune to the premium cable channel you want to record.

•Begin recording.

To view a different channel while recording:

•Press the TV/VIDEO button on the remote control to select TV mode.

•Tune the television to a program (except another premium cable channel).

Front Control Panel

The front control panel can be used to access menus and switch video mode when the remote control is not available.

Note: The ON/OFF indicator LED (red) will be lit when set is on.

ON /OFF INDICATOR INFRARED SENSOR

Front Panel

	S-VIDEO					CH
		VIDEO 4	L - AUDIO - R	POWER	TV/VIDEO		BBE
						ACTION
					VOL		VOL
						CH

POWER ON/OFF

Note: For model CT-30WC14 front A/V is labelled VIDEO 3.

A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the video inputs. See the optional equipment manual for details.

Procedure

•Connect equipment to front Audio/Video input jacks.

•Press TV/VIDEO button to select front VIDEO input mode.

•Operate optional equipment as instructed in equipment manual.

Amplifier Connection (TO AUDIO AMP)

To listen through a separate stereo system, connect an external audio amplifier to TO AUDIO AMP outputs on back of television.

Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.

	TERMINALS ON BACK OF TELEVISION
	HDMI
	AV IN
	VIDEO
	Y
	PB				S-VIDEO
						VIDEO
	PR						EXTERNAL AMPLIFIER
	L					L
ANT
	AUDIO
	IN					R
	R						90.7 MHZ
	1	2	INPUT	INPUT	INPUT PROG		TO AUDIO
	COMPONENT		1	2	3	OUT
	VIDEO INPUT						AMP

CABLES NOT INCLUDED

Audio Adjustments

•Select SPEAKERS ON located in the onscreen AUDIO menu.

•Set amplifier volume to minimum.

•Adjust television volume to desired level.

•Adjust amplifier volume to match the television.

•Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.

Note: Variable Audio Out is not available in model CT-30WC14.

•Volume, mute, bass, treble and balance are now controlled through the television.

Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.

Digital TV - Set-Top Box (DTV-STB) or DVD Connection

This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y,PB,PR) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.

This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures.

Use this diagram to connect the DTV-STB or DVD player to the back of your television.

TERMINALS ON BACK OF DTV-STB OR DVD PLAYER

		DIGITAL TV OUTPUT
	R-	Y	PB	PR
		MAIN
	OI	VIDEO
	UDA-L
		R-AUDIO-L - VIDEO S-VIDEO
		NTSC OUTPUT

	TERMINALS ON BACK OF TELEVISION
	HDMI
	AV IN
	VIDEO
	Y
	PB				S-VIDEO
						VIDEO
	PR
ANT	L					L
	AUDIO
	IN					R
	R
	1	2	INPUT	INPUT	INPUT	PROG	TO AUDIO
	COMPONENT		1	2	3	OUT
	VIDEO INPUT						AMP

CABLES NOT INCLUDED

Note: There are three video jacks, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs.

8 z

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television.

Note:	If the Main Picture signal is Component Video Input or
	HDMI, no Program out signal will be available.
	TERMINALS ON BACK OF TELEVISION
HDMI
AV IN
	VIDEO
	Y
	PB				S-VIDEO	MONITOR	VCR
					VIDEO
	PR
ANT	L				L		OR
	AUDIO
	IN				R
	R
	1	2	INPUT INPUT INPUT PROG
	COMPONENT		1	2	3 OUT	TO AUDIO
	VIDEO INPUT					AMP
			CABLES NOT INCLUDED
Note:	Rear A/V jacks diagram may vary, depending on model.
	Please refer to the FEATURE CHART on page 4 for your
	model’s capabilities.

Procedure

•Connect optional equipment to PROG OUT and TO AUDIO AMP L/R terminals.

•PROG OUT terminal display is the same as on-screen display.

•See optional equipment manual for further instructions for recording and monitoring.

HDMI (High Definition Multimedia Interface) input connection

About HDMI

HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standards, enhanced and high definition video formats as well as existing multi-channel audio format. One jack supports both

video and audio information. The HDMI/HDCP1 input can

be connected to an EIA/CEA 8612 compliant consumer electronic device, such as a set top box or DVD player equipped with an HDMI or DVI output connection. By inputting a High-bandwidth Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this TV, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This TV is compatible with 1080i, 480p and 480i formats. Select the output of the connecting device to match that of the TV.

Notes:

1.HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection.

2.EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

OPTIONAL EQUIPMENT CONNECTIONS

Compatible formats

This TV is compatible with the following formats. Please set the connecting device to the following format.

Video signal

	Format	No. of dots	Vertical scanning
			frequency (Hz)
	1080i	1920 x 1080i	59.94 / 60
	480p	720 x 480p	59.94 / 60
		640 x 480p	59.94 / 60
	480i	720 x 480i	59.94 / 60

Audio signal

When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 KHz / 44.1KHz / 32 KHz.

Connection diagram

Follow the diagram below to connect the TV to a set top box or a DVD player.

		TERMINALS ON BACK OF TELEVISION
		HDMI
		AV IN
		VIDEO
		Y
		PB	S-VIDEO
			VIDEO
		PR
	ANT	L	L
		AUDIO
Incoming
		IN	R
Cable		R

	1	2	INPUT	INPUT	INPUT	PROG	TO AUDIO
	COMPONENT		1	2	3	OUT
	VIDEO INPUT						AMP

CABLES NOT INCLUDED
L		HDMI
	AUDIO	OUT
Note: Use analog audio when no digital
audio is available.	OUT
R

EXTERNAL DIGITAL

COMPONENT

* The connector on the TV is HDMI Type A connector.

Procedure

•Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the TV.

•Press TV/VIDEO button on the remote control to select HDMI input. The interface on the TV is an HDMI Type A connector.

•If the external device has a DVI output only, use a DVI to HDMI adaptor cable*3 to connect to the HDMI jack on the TV. Also, connect the Audio Out signal from the external device (set top box or DVD player) to the Audio In*4 jacks below the HDMI input.

•If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.

Notes:

*3. HDMI-DVI conversion cable (TY-SCH03DH) available on Panasonic Website: www.panasonic.com (only for USA customers).

*4. Please refer to page 19 for Audio setting detail.

ENGLISH

9 z

ENGLISH

SPECIAL FEATURES

Special Features

ASPECT Button

Customer Options depending on Component Input Signal

	INPUT		DISPLAY ON SCREEN		ASPECT BUTTON
	SIGNAL				OPTIONS
	1080i		16:9 only		No options
	480p (16:9)		Default to 16:9		4:3, Full or Zoom (see
					below)
	480p (4:3)		Default to FULL mode.		4:3, Full or Zoom (see
			Note: Will stretch picture
					below)
			horizontally.
	480i		Default to JUST mode		4:3, Full, Just or
					Zoom (see below)

The ASPECT button on the remote control lets you choose one of four display modes, depending on the formats of the received signal and your preferences.

	ASPECT	Image on
Input Signal
		16:9 Screen Size

480i or 480p		4
	4:3	3

	ASPECT	Image on
Input Signal
		16:9 Screen Size

480i	or 480p	16
	ZOOM	9

This will display a 4:3 picture at its standard 4:3 size with black side bars. (Not recommended for viewing 4:3 pictures as it may create a permanent image on screen if displayed for a prolonged period of time.)

This will expand the 4:3 picture uniformly (width and height) to full screen width and then reposition the picture vertically. (Recommended for letterbox pictures.)

Note: If menu is displayed while in Zoom mode, the aspect will change to Full to display complete menu.

ASPECT	Image on		This will show picture at full
Input Signal	16:9 Screen Size		screen size. (Recommended
480i or 480p	16		for anamorphic pictures.)
FULL		9
			This will stretch the right and
ASPECT	Image on		left edges of a 4:3 picture to
Input Signal			fill the screen, The center of
	16:9 Screen Size
480i	16		the screen will have aspect
JUST		9	correction applied. The size
			of the picture will depend on
			the original signal.
			(Recommended for regular
			TV viewing.)

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes. For example:

•If receiving STEREO, SAP and MONO or receiving STEREO and MONO only, pressing SAP button will toggle the audio as follows:

STEREO SAP MONO

Split Operation

This feature lets you watch two different channels side by side with or without an external video source.

Procedure

SPLIT

• Press to display Split frame.

•Choose channels for the SPLIT frame by pressing

SPLIT CTRL

button. The right indicator ( ) will appear

CH

in Split frame, then use

or

or the remote

CH

control numeric keypad.

Note: Split frame channel can only be changed while right indicator ( )is displayed in split frame.

Change Split Frame channel Change Main Picture channel

•	Select	channels for the Main picture by pressing
		CH
	or	or use the remote control numeric keypad.
	CH

SWAP

•Press to switch the SPLIT FRAME and MAIN PICTURE source.

RECALL

•

Press

to view picture source status.

SPLIT

•Press to cancel Split frame.

Split Operation With a Cable Box

To view premium (scrambled) cable channels through your cable box in the Main Picture:

Note: Use this procedure if you want to watch premium cable channels in the Main Picture while viewing a television program or video in the Split frame.

Procedure

•Tune TV to Channel 3.

SPLIT

•Press on the remote control to display Split frame.

Note: Audio is from the Main Picture only.

•Verify that the Cable box is ON.

•Choose channels for the Main Picture by tuning the cable box.

•Choose channels for the SPLIT frame by pressing

SPLIT CTRL				CH
		button, then use	or	or the remote
control numeric keypad.			CH

Note: Swap is not available when using the cable box to tune channels. If your cable box has video output, it can be connected to the TV to allow you to use all SPLIT functions.

10 z

SPECIAL FEATURES

Split Operational Buttons

SPLIT CTRL Button
Pressing SPLIT CTRL will enable you to use	or	or
		CH
	CH

numeric keys for changing split channel and to use TV/ VIDEO button to select desired input for split frame.

TV/VIDEO Button

Press when Split frame is displayed to select desired input mode.

Procedure

		SPLIT
•	Press				to display Split frame.
			SPLIT CTRL
•	Press					to use remote control for split
	operation.
		TV/VIDEO
•	Press					to display video input menu.

•Press corresponding number key on the remote control to select the input of your choice.

Note: Split frame input mode can only be change while right indicator ( )is displayed.

Main Picture

				TV				COMPONENT1		COMPONENT2
									VIDEO 1/2/3/4	HDMI-IN
								SPLIT Frame

Note: Model CT-30WC14 has one Component Input and three Video inputs.

Search Button

This feature lets you scan through all available channels.

Procedure

SPLIT

•

Press

to display split frame.

SEARCH

•

Press

to display search frames.

SEARCH

•

Press

again to stop search feature. Split

frame channel will be the last active search frame.

SPLIT

•

Press

to cancel split frame.

2

Main Picture	3
	Search Frames
	4

Note: When main picture is component or HDMI signal, Search feature is not available.

Freeze Button

This feature is used to stop action in Split frame.

Procedure

		SPLIT
•	Press							to display split frame.
		FREEZE
•	Press							to stop split frame action.
		FREEZE
•	Press							again to continue action.

SPLIT

•Press to cancel frame.

Main Picture

Split freeze frame

Main Picture Freeze Feature

This feature is used to stop action of the Main Picture and display it on a Split freeze frame.

Procedure

		FREEZE
•	To stop action for Main picture, press					while
	Split frame is not displayed.

•Main Picture freeze will be displayed in Split frame.

	FREEZE
• Press					again to cancel Main Picture freeze
frame.

Note: While Main Picture freeze frame is displayed, only FREEZE button is active for split frame. All other Split buttons have no effect.

Direct Video Input Selection

This feature lets you select video inputs directly using the TV/VIDEO button and the numeric keys on the remote control.

Procedure

	TV/VIDEO
•	Press		on the remote control to display the
	Input selection menu.
1	TV
				1	TV
2	COMPONENT1			2	COMPONENT1
3	COMPONENT2			3	HDMI
4	HDMI			4	VIDEO1
5	VIDEO1			5	VIDEO2
6	VIDEO2			6	VIDEO3
7	VIDEO3
			For model CT-30WC14 only.
8	VIDEO4

•Press corresponding number key on the remote control to select the input of your choice.

Note: Video input can also be selected by pressing TV/VIDEO, then the CH buttons.

ENGLISH

11 z

ENGLISH

REMOTE CONTROL OPERATION

Remote Control Operation

ASPECT

TV/VIDEO

POWER

Select picture size (ratio) to match

Press to select TV or input modes for main

programming format.

picture or split frame.

Press to turn ON and OFF.

Note:

Refer to TV/VIDEO Button section on

page 11 for selecting split frame input.

MUTE

SAP

Press to mute sound. Press to display and

Press to access audio modes (Stereo, SAP

cancel CC (Closed Caption).

or Mono).

VD

AU

LIGHT

D

X

R

R

C

C

V

V

V

C

B

R

DT

L

D

Press to illuminate remote buttons.

V

B

S

T

Press to select remote operation.

CH

VOL VOL

CH

Press to adjust TV sound and navigate in

Press to select next or previous channel and

menus.

navigate in menus.

ACTION

EXIT

Press to access menus.

Press to exit TV and DBS menus.

BBE

GUIDE

MENU

DBS functions button.

BBE - Press to turn on or off.

MENU - Press to access DBS or DVD menus.

PAGE

RECALL

DBS page up/down and DVD skip -/+

buttons.

Press to display time, channel, sleep timer,

and other options.

PROG

4

5

6

Press to enter minor number in a compound

number.

7

8

9

*SWAP

*SPLIT

**SPLIT CTRL

0

REW

PLAY

FF

Press numeric keypad to select any channel.

*FREEZE

*SEARCH

REC

PAUSE

STOP

R-TUNE

TV/VCR

DVD/VCR CH

OPEN/CLOSE

Press to switch to previously viewed

EUR7603ZF0

channel or input modes.

*(FREEZE)

*(SEARCH)

*Split function buttons

Component function buttons

SPLIT CTRL

**While split frame is displayed press

button: right indicator will be displayed in split frame. Then use CH /CH or numeric keypad to change channels and TV/VIDEO to select input for split frame.

12 z

REMOTE CONTROL OPERATION

Operating Components with Remote Control

Note: Refer to page 15 for programming Remote Control procedure.

Operating a VCR

Program the remote control to use with VCR.

TO DO THIS...

PRESS

TO DO THIS...

PRESS

Turn on/off

POWER

Rewind the

REW

Tape

Select

TV Input

TV/VIDEO

Fast Forward

FF

mode for VCR

1

2

3

Change Channels

CH

Select a Channel

4

5

6

up/down

CH

7

8

9

0

Change

Channels

DVD/VCR CH

Pause

PAUSE

up/down

Record

REC

Change to TV or

TV/VCR

VCR Mode

Play

PLAY

On screen VCR

RECALL

X

Display

Stop

STOP

Operating a DBS

Program the remote control to use with DBS.

	TO DO THIS...	PRESS	TO DO THIS...		PRESS
	Turn on/off	POWER	Navigation	VOL					VOL
			left/right
	STB Audio track	SAP	STB Action		ACTION
				1	2				3
	Navigation	CH	Select a	4	5				6
	up/down	CH	Channel	7	8				9
					0
	STB Change	DVD/VCR CH	Previous		R-TUNE
	Channels up/down		Channel
	STB Aspect	ASPECT	STB page		PAGE
			up/down
	STB Menu	MENU	STB guide		GUIDE
	STB Exit	EXIT	STB search	OPEN/CLOSE
	STB program info	RECALL	STB select		PROG
			dash channel
	STB FAV	PLAY	STB M. guide		SWAP
		X
	STB Record	REC	STB jump			FF
	Change to TV or	TV/VCR
	SAT Mode

Operating a DVD

Program the remote control to use with DVD

TO DO THIS...	PRESS		TO DO THIS...		PRESS
Turn on/off	POWER		Skip search<<		REW
Navigation	VOL VOL		Skip search>>			FF
left/right
				1	2				3
Navigation	CH		Select chapter	4	5				6
up/down	CH			7	8				9
					0
Ch -/+	DVD/VCR CH		Pause		PAUSE
Record	REC		Select		ACTION
Play	PLAY		DVD Display		RECALL
	X
Stop	STOP		Menu		MENU
Open/Close	OPEN/CLOSE		Title		GUIDE

PAGE

Skip -/+

Operating a CD

Program the remote control to use with CD.

TO DO THIS...

PRESS

TO DO THIS...

PRESS

Turn on/off

POWER

Play

PLAY

X

Time format

RECALL

Next disk

GUIDE

CH

1

2

3

Next/previous

Select Tracks

4

5

6

track

CH

7

8

9

0

Random / repeat.

DVD/VCR CH

Next disk

R-TUNE

Search FF

FF

Search Rew

REW

Skip -/+

PAGE

Still/pause

PAUSE

Stop

STOP

Open/Close

OPEN/CLOSE

ENGLISH

13 z

ENGLISH

REMOTE CONTROL OPERATION

Operating a DTV Set Top Box

Program the remote control to use with DTV.

TO DO THIS...	PRESS	TO DO THIS...		PRESS
Turn on/off	POWER	Program		RECALL
		Information
SAP	SAP	Guide		GUIDE
			1	2			3
Navigation	CH	Select	4	5			6
up/down	CH	Channel	7	8			9
				0
Navigation		Select dash		PROG
	VOL VOL
left/right		number
Aspect	ASPECT	Record		REC
DTV Action	ACTION	Menu		MENU

EXIT

Exit

Operating a Receiver

Program the remote control to operate audio receiver.

	TO DO THIS...	PRESS	TO DO THIS...	PRESS
	Turn on/off	POWER	Volume +/-	VOL	VOL
				Press Remote
				numeric keypad
				AVI	Press 1
				AV2	Press 2
		MUTE		AV3	Press 3
	Audio Mute		To select AV input	AV4	Press 4
			or Components	CD	Press 5
				TUNER	Press 6
				PHONO	Press 7
				TAPE	Press 8
				AUX	Press 9
	Switch input	TV/VIDEO	Surround -	REW
	Tuner +/-	CH	Surround +	FF
		CH

DVD/VCR CH

Center-/+

Operating a PVR (Personal Video Recorder)

Program the remote control to use with a PVR.

	TO DO THIS...	PRESS	TO DO THIS...		PRESS
	Turn on/off	POWER	Rewind		REW
	Select TV/VCR	TV/VIDEO	Fast Forward		FF
				1	2	3
	PVR up/down	CH	Select a Channel	4	5	6
		CH		7	8	9
					0

TO DO THIS...	PRESS			TO DO THIS...	PRESS
					PAUSE
PVR left/right	VOL VOL			Pause
Change	DVD/VCR CH			Replay zone	R-TUNE
Channels
up/down
PVR select	ACTION			Instant replay	TV/VCR
Record	REC			Return to live	PROG
Play	PLAY			Quick skip	OPEN/CLOSE
Stop	STOP			Replay guide	GUIDE
Menu	MENU			Exit	EXIT

RECALL

Enter

Operating a Cassette Deck

To operate a cassette deck, the remote control must be in AUX mode and be programmed with the appropriate code for your equipment.

TO DO THIS...	PRESS			TO DO THIS...	PRESS
Turn on/off	POWER			Rewind	REW
Record	REC			Fast Forward		FF
Play	PLAY			Pause	PAUSE
Stop	STOP			Open/Close	OPEN/CLOSE

R-TUNE

Deck A/B

Operating a CABLE BOX

Program the remote control to use with Cable Box.

	TO DO THIS...	PRESS	TO DO THIS...		PRESS
	Turn on/off	POWER	Volume	VOL		VOL
			up/down
	Audio Mute	MUTE	Enter		ACTION
	Change			1	2	3
		CH	Select a	4	5	6
	Channels
		CH	Channel	7	8	9
	up/down
					0
	Change Channels	DVD/VCR CH	Previous		R-TUNE
	up/down		Channel

14 z

REMOTE CONTROL OPERATION

Programming The Remote Control

The Universal Remote Control can be programmed to operate many manufacturers’ components using the component function buttons for VCR, DVD, AUX, RCVR, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Default Modes for Remote Control

	Device		Operates		Default
	TV		TV (Panasonic Only)		Panasonic TV Code
	DTV-STB		DTV (Panasonic Only)		Panasonic DTV Code
	CABLE		CABLE (Preset)		Panasonic CABLE
					Code
	DBS		DBS (Preset)		Panasonic DBS Code
	VCR		VCR (Preset)		Panasonic VCR Codes
	DVD/CD		DVD and CD (Preset)		Panasonic DVD Codes
	AUX		Personal Video Recorders,		Panasonic Personal
			Tape and VCR2		Video Recorder Code
	RCVR		Audio receiver (Preset)		Panasonic RCVR code

Note: Determine the manufacturer of the component and look in the table for the code (found on page 16 and 17).

Procedure

1.Confirm that the external component is plugged in and operating.

2.Turn the component off.

ACTION		POWER together for at least 5
3. Press	and
seconds.	After 5	seconds, the illuminated mode

(component) buttons will begin to flash. Release the ACTION and POWER buttons.

4.Press appropriate component button on the Remote Control: VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV, CABLE or DBS. The component button will illuminate steadily and all others will go out.

5.Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons). The component button will blink twice.

6.Press the Remote Control POWER to test the

component. If the procedure was successful, the component will turn on and the component key will blink twice and then go out.

Note: If the component does not operate with the Remote Control, repeat the steps 3 through 6 using another code (some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

1.Confirm that the external component is plugged in and on.

2.Turn the component off.

ACTION

3. Press

and POWER together, for at least 5

seconds. After 5 seconds, the illuminated mode (component) buttons will begin to flash. Release the

ACTION and POWER buttons.

4.Press the appropriate component button on the Remote Control. The component button will illuminate steadily and all others will go out.

5. Press the POWER button to set the remote control to the

step and set mode.

6.Point the remote control towards the component.

7.Press VOL (the mode key will blink three times), then press the Remote Control POWER button to test the

component. Continue this process until the proper code is found. If the procedure was successful, the component will turn on.

Note:	Each time you press the VOL button, make sure that the
	component key blinks twice before pressing the POWER
	button.
	ACTION
8.	Once the device responds, press	to store the
	code. The mode (component) button will blink twice.
Note:	It may take many attempts before	the correct code
	is found. If you miss a code, press	VOL, then press

the POWER button to test the component.

Component Codes

The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR				DVD				DVD (CD)

AUX (VCR2)

AUX (TAPE)

RECEIVER

DTV

CABLE

DBS

ENGLISH

15 z

REMOTE CONTROL OPERATION

Component codes

			Codes For VCR
			Brand	Code
			Admiral	335
			Aiwa	332
			Akai	314, 315, 316, 329
			Audio	311, 339
			Dynamic
ENGLISH			Bell & How-	305, 313
			ell
			Broksonic	320, 326
			Canon	323, 325
			CCE	343
			Citizen	306
			Craig	305, 306, 329
			Curtis	324, 345
			Mathes
			Daewoo	301, 324, 343
			DBX	310, 311, 339
			Dimensia	345
			Emerson	303, 319, 320,
				325, 326, 343
			Fisher	305, 307, 308,
				309, 313
			Funai	320, 326, 334
			GE	324, 333, 345
			Goldstar	306
			Gradiente	334
			Hitachi	300, 323, 345
			Instant	323, 324
			Replay
			Jensen	339
			JVC	310, 311, 334, 339
			Kenwood	306, 310, 311, 339
			LXI	300, 305,
				306,307, 308, 309
			Magnavox	323, 324, 331
			Marantz	310, 311, 339
			Marta	306
			Memorex	309, 324
			MGA	338, 340, 341,
				347,348
			Minolta	300, 345
			Mitsubishi	338, 340, 341,
				347, 348
			Multitech	304, 347
			NEC	310,311, 334, 339
			Olympic	323, 324
			Optimus	306, 321, 328, 335
			Orion	320, 326
			Panasonic	321,322, 323, 324

Codes For VCR (Contd.)

	Brand	Code
	Penney	300,305, 310, 311,
		324, 339, 345
	Pentax	300,311, 345
	Philco	320, 323, 324,
		326, 331, 343
	Philips	323, 324, 331
	Pioneer	323
		300, 301, 302,
	Proscan	323, 324, 331,
		333, 345, 346
	Quasar	321, 322, 323, 324
	Radio Shack	305, 309, 324,
		333, 336, 340
		300, 301,302,
	RCA	323, 324, 331,
		333, 345, 346
	Realistic	305, 309, 324,
		336, 340
	Samsung	302, 304, 333
	Sansui	320, 326, 339, 352
	Sanyo	305, 309, 313
		301, 302, 304,
	Scott	309, 320, 326,
		338, 340, 347, 348
	Sears	300, 305, 306,
		307, 308
	Sharp	335, 336
	Shintom	317
	Signature	335
	2000
	Singer	337
	Sony	328, 329, 330
	Sylvania	323, 331, 324
	Tashiro	306
	Tatung	310, 311, 339
	Teac	310, 311, 339
	Technics	321, 322, 323, 324
	Teknika	324
	Toshiba	301, 346
	Vector	311
	Research
	Wards	306, 309, 335,
		336, 344
	Yamaha	305, 310, 311, 339
	Zenith	306,344

Codes For Cable Box

	Brand	Code
	ABC	124
	Archer	125, 132
	Cableview	105, 132
	Citizen	105,122
	Curtis	112, 113
	Diamond	124, 125, 132
	Eagle	129
	Eastern	134
	GCbrand	105, 132
	Gemini	122
	General	111, 119, 120,
	Instrument/	121, 122, 124,
	Jerrold	125, 126,127
	Hamlin	112, 118, 140,
		141, 142, 145
	Hitachi	103, 124
	Macom	103, 104, 105
	Magnavox	133
	Memorex	130
	Movietime	105, 132
	Oak	102, 137, 139
	Panasonic	109, 110, 114
	Philips	106,107, 128,
		129, 130
	Pioneer	101, 116
	Pulsar	105, 132
	Puser	132
	RCA	115
	Realistic	132
	Regal	112, 118, 140,
		141, 142, 145,
	Regency	134
	Rembrant	105, 132, 137
	S.A.	111, 112, 113
	Samsung	105
	Scientific	111, 112, 113
	Atlanta
	Slmark	101, 105
	Sprucer	105, 110
	Stargate	105, 132
	Teleview	101, 105
	Texscan	144
	Tocom	135
	Toshiba	104
	Unika	125, 132
	Universal	122, 132
	Videoway	106
	Viewstar	129, 130
	Zenith	100, 117
	Zenith/.Drake	100
	Satellite

Codes For DBS

	Brand	Code
	Dish Network	105, 115, 116
	(Echostar)
	Echostar	105
	Express VU	105, 115
	G. E.	106
	G.I. (General	108
	Instrument)
	Gradiente	114
	Hitachi	103, 111,
		112
	HNS (Hughes)	103
	Magnavox	101, 102
	Panasonic	104
	Philips	101, 102
	Primestar	108
	Proscan	106, 109, 110,
		113
	RCA	106, 109,
		110, 113
	Sony	107
	Star Choice	103, 108
	Toshiba	100
	Uniden	101, 102
	Zenith	127
	Codes For DVD

Brand	Code
Denon	100
Ferguson	101
JVC	109
Mitsubishi	105
Nordmende	101
Panasonic	100
Philips	103
Pioneer	102
RCA	101
Saba	101
Samsung	110
Sharp	108
Sony	104
Technics	100
Thomson	101
Toshiba	103
Yamaha	100
Zenith	107

16 z

REMOTE CONTROL OPERATION

Component Codes (Cont.)

Codes for Cassette Decks

Marca	Código
Aiwa	223, 224, 225
Denon	231
Fisher	203
Jensen	214
JVC	229, 230
Kenwood	200, 207
Marantz	202
Nakamichi	205
Onkyo	208, 209, 213
Panasonic	216, 218
Philips	222
Denon	231
Fisher	203
Jensen	214
JVC	229, 230
Kenwood	200, 207
Marantz	202
Nakamichi	205
Onkyo	208, 209, 213
Panasonic	216, 218
Philips	222
Pioneer	204
RCA	226, 227, 228
Sansui	205, 210
Sharp	231
Sony	219, 220
Teac	210, 211, 215
Technics	216, 218
Yamaha	201, 202

Codes for Receivers

	Marca	Código
	Admiral	120
	Aiwa	125, 126
	Denon	134, 135, 136
	Fisher	104
	Garrard	113
	Harman	115, 123
	Kardon
	Jensen	129
	JVC	132, 133
	Kenwood	100, 108
	Magnavox	127
	Marantz	124
	Mclntosh	116
	Nakamichi	106
	Onkyo	109, 114
	Optimus	103, 127, 130,
		131
	Panasonic	118, 119, 121
	Philips	123
	Pioneer	105, 107
	Quasar	118, 119, 121
	RCA	103, 105, 127,
		130, 131
	Sansui	103, 111, 139
	Sharp	134, 137
	Sony	122
	Soundesign	138
	Teac	111, 112, 113
	Technics	118, 119, 121
	Victor	132, 133
	Yamaha	101, 102

Codes For CD Player

	Brand	Code
	Admiral	226
	Aiwa	233, 235
	Carver	229
	Denon	242
	Emerson	239
	Fisher	205
	Harman/Kardon	219, 220,
		221, 223
	Hitachi	207
	Jensen	234
	JVC	240, 241, 245
	Kardon	223
	Kenwood	200, 201, 211,
		245
	LXI/Sears	236
	Magnavox	229, 232
	Marantz	229
	McIntosh	221
	Nakamichi	210
	Onkyo	214, 215
	Optimus	208, 218,
		220, 222
	Panasonic	224, 225, 227
	Philips	229, 230
	Pioneer	208
	Quasar	224, 225, 227
	RCA	231, 237,
		238, 247
	Sansui	210, 246
	Sanyo	205
	Scott	210, 246
	Sharp	242, 243
	Sherwood	220
	Sony	228
	Soundesign	244
	Teac	212, 216, 218
	Technics	224, 225, 227
	Victor	240, 241, 245
	Yamaha	202, 203, 204

Codes For Personal Video

Recorders

	Brand	Code
	Panasonic Replay	100
	TV
	Philips Tivo	102
	Sony Tivo	101

ENGLISH

17 z

ENGLISH

BASIC MENU NAVIGATION

Basic Menu Navigation

Press	to display the
	Main Menu.

Press	to choose the
	desired icon.

EXIT

PICTURE
		VIVID
PIC MODE
COLOR		-___ - ___-___-___ - ___-___ - ___-___ -__ __-___-___ -II- - - - - - - - - - - -
TINT		- - - - - - - - - - - -I- - - - - - - - - - - -
BRIGHTNESS		- - - - - - - - - - - -I- - - - - - - - - - - -
PICTURE		- - - - - - - - - - - - - - - - - - - - - - - l
SHARPNESS		- - - - - - - - - - - - - - - - - l - - - - - -
		NO
NORMAL
OTHER ADJ.

PRESS ACTION FOR MAIN MENU

EXIT

PICTURE

PICTURE

VIVID

PIC MODE

PIC MODE

VIVID

_ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _

Press

to enter the sub-

COLOR

I

I I I I I

I I I I

I

I

I I I I

TINT

- - - -- --- -- -- -- --___ - __-___-___ - ___-___ - ___-___

-- -- ---__ __-___-___

-- --I

- -- -- -- I

- - -- --- -- -- -- --- --

-

- - - -

COLOR

-II-

- - - -

- - - - - - -

menu field.

TINT

BRIGHTNESS

I

I I I I I

I I I I

I

I

I I I

BRIGHTNESS

- - - -

- - - -

- - - -

I-

- - - -

- - - - - - -

PICTURE

- - - -I

I- I-I -I -I

I- I-I -I -I -I

I- I-I -I

-I I- I-I -I -I I- I- IlI

I I

I I I

SHARPNESS

- - - I- I- I-I -I -I

I- I-I -I

-I

I-

I- I-I -I - l - - - - - -

_ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _

NO

NORMAL

NO

OTHER ADJ.

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

PRESS ACTION FOR MAIN MENU

sub Menu

Field

PICTURE

Press

to select desired

VIVID

PIC MODE

COLOR

-___ - ___-___-___ - ___-___ - ___-___ -__ __-___-___ -II-

- - - -

- - - - - - -

sub-menu.

TINT

I

- - - -

- - - -

- - - -

-

- - - -

- - - - - - -

BRIGHTNESS

- - - -

- - - -

- - - -

I

-

- - - -

- - - - - - -

PICTURE

- - - -

- - - -

- - - -

-

- - - -

- - - - - - l

SHARPNESS

- - - -

- - - -

- - - -

-

- - - -

- - - - - -l

NO

NORMAL

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

Press	to select or adjust
	desired sub-menu.

BRIGHTNESS 32 ----------

I---------

Note: For sub-menu with OTHER ADJ.

		PICTURE
		PIC MODE
		COLOR
		TINT
Press	to select OTHER ADJ.	BRIGHTNESS
		SHARPNESS
		PICTURE

NORMAL

OTHER ADJ. PRESS to ENTER

PRESS ACTION FOR MAIN MENU

					PICTURE
					COLOR TEMP			NORMAL
					NATURAL COLOR			ON
Press		to enter sub sub-menu			VIDEO NR			OFF
					COLOR MATRIX			SD
		field.			3D Y/C FILTER			ON
					MPEG NR			OFF
					VM			ON
					OTHER ADJ.		PRESS FOR MORE
					PRESS ACTION TO RETURN

sub sub-Menu Field

Press	to select desired sub		PICTURE			ON
			NATURAL COLOR
	sub-menu.		COLOR TEMP			NORMAL
			VIDEO NR			OFF
			3D Y/C FILTER			ON
			COLOR MATRIX			SD
			VM			ON
			MPEG NR			OFF
			OTHER ADJ.		PRESS FOR MORE
			PRESS ACTION TO RETURN

Press	to select or adjust	PICTURE
		COLOR TEMP			WARM
	desired sub sub-	NATURAL COLOR			ON
		VIDEO NR			OFF
	menu.	COLOR MATRIX			SD
		3D Y/C FILTER			ON
		VM			ON
		MPEG NR			OFF
		OTHER ADJ.		PRESS FOR MORE
		PRESS ACTION TO RETURN

Note: To EXIT menus.

Press	repeatedly until Main Menu	EXIT
	Icon is highlighted.
	Main Menu Icon

Press	to exit Main Menu.
or
		NORMAL PICTURE
EXIT	to exit menus.
Press

18 z

ICON MENUS OPERATION

Icon Menus Operation

PICTURE

Note: While sub-menu features are highlighted, press VOL to adjust or activate.

PIC MODE - Lets you choose one of three pre-set Picture Modes that best suits the program you are viewing. Selecting this feature will also affect Color Temperature setting.

PIC MODE - COLOR TEMP DEFAULT SETTINGS

	PIC MODE	COLOR TEMP
	VIVID	COOL
	STANDARD	NORMAL
	CINEMA	WARM

Note: Each mode has its own picture settings (Color, Tint, Brightness, Picture and Sharpness) and Color Temp settings.

•VIVID - This is the default mode, It provides enhanced picture contrast and sharpness for viewing in a well-lit room.

•STANDARD - Recommended for normal viewing conditions with subdued room lighting.

•CINEMA - Select this mode for watching movies in a darkened room. It provides a soft, film-like picture.

COLOR - Adjusts desired color intensity.

TINT - Adjusts natural flesh tones.

BRIGHTNESS - Adjusts dark areas of picture.

PICTURE - Adjusts white areas of picture.

SHARPNESS - Adjusts clarity of outline detail.

NORMAL - Reset each of the PIC Mode adjustments to factory default settings.

		PICTURE
		PIC MODE		VIVID
		COLOR	-__ - __-__-__ - __-__ - __-__ -_ _-__-__	-II- - - - - - - - - - - -
			_ _ _ _ _ _ _ _ _ _ _ _
		TINT		I
			- - - - - - - - - - -
		BRIGHTNESS	- - - - - - - - - - -	-I- - - - - - - - - - - -
		PICTURE	- - - - - - - - - - -	- - - - - - - - - - - - l
		SHARPNESS	- - - - - - - - - - -	- - - - - - l - - - - - -
		NORMAL		NO
		OTHER ADJ.
		PRESS ACTION FOR MAIN MENU
OTHER ADJ.

Highlight OTHER ADJ. and press VOL to display the sub sub-menu.

Note: While sub sub-menu features are highlighted, press VOL to select or activate.

PICTURE
COLOR TEMP			NORMAL
NATURAL COLOR			ON
VIDEO NR			OFF
3D Y/C FILTER			ON
COLOR MATRIX			SD
VM			ON
MPEG NR			OFF
OTHER ADJ.		PRESS FOR MORE
PRESS ACTION TO RETURN

•COLOR TEMP (temperature) - To increase or decrease WARM (red) and COOL (blue) colors to suit personal preferences.

•NATURAL COLOR - To increase the color reproduction range with natural color gradation and highly delicate hues.

•VIDEO NR - Reduces noise in the channel, commonly called snow.

•3D Y/C FILTER - Minimizes noise and cross color in the picture.

•COLOR MATRIX - Available only with 480p signal. Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition). This feature is not selectable when viewing a regular TV (NTSC) program.

Note: When viewing a non-standard DTV signal format, you can change color parameters manually for the best picture quality.

•VM (VELOCITY MODULATION) - Increase picture sharpness and provides crisp white to black transitions

•MPEG NR - This feature reduces the block noise caused by the MPEG video compression used in DVD and HDTV sources.

AUDIO

Note: While sub-menu features are highlighted, press VOL to adjust or activate.

MODE - Select STEREO, SAP (Second Audio Program) or MONO. (Use MONO when stereo signal is weak).

BASS - Increase or decrease the bass response.

TREBLE - Increase or decrease the treble response.

BALANCE - Emphasize the left/right speaker volume.

NORMAL - Reset BASS, TREBLE and BALANCE adjustments to factory default settings.

AUDIO
MODE		STEREO SAP MONO
BASS
		- - - - - - I - - - - - - - -
TREBLE		- - - - - - I - - - - - - - -
BALANCE		- - - - - - - - - - I - - - - - - - - - - - -
NORMAL		SET
OTHER ADJ.

: EXIT : SUB MENU

OTHER ADJ.

Note: While sub sub-menu features are highlighted, press VOL to adjust or activate.

AUDIO
	AI SOUND	ON
	BBE	ON
	SURROUND	OFF
	HDMI IN	AUTO
	SPEAKERS
OTHER ADJ.
	ON

PRESS ACTION TO RETURN

•AI SOUND - Equalize overall volume levels across all channels. (AI sound is not available in VIDEO mode).

•BBE® - BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism.

•SURROUND - Enhances audio response when listening to stereo.

ENGLISH

19 z

ENGLISH

ICON MENUS OPERATION

AUDIO (cont.)

Note:

Use the remote

numeric keypad to select desired

OTHER ADJ. (cont.)

channel (refer to your local TV guide).

• HDMI IN - When using HDMI, this feature will let you

CHANNELS

CHANNELS

MANUAL CAPTION

switch between Analog Input and Digital Input.

PRESET CAPTION

ENTER CHANNEL

3

•

Auto - Automatically selects Analog / Digital signal.

MANUAL CAPTION

ENTER CAPTION

_ _ _ _

•

Digital - Digital Input only.

INPUT LABEL

TO MOVE CURSOR

•

Analog - Analog Input only.

TO SELECT CHANNEL

• SPEAKERS - This feature is used when connecting to

OTHER ADJ.

an external amplifier.

PRESS ACTION TO RETURN

•

ON - TV speakers operate normally.

PRESS ACTION TO RETURN

•

INPUT LABEL -

To label video input

connections for

•

OFF & Variable Audio Out - TV speakers off - audio

onscreen display.

adjustable by television.

Note:

Variable Audio Out is not available in model CT-30WC14.

CHANNELS

CHANNELS

INPUT LABEL

•

OFF & Fixed Audio Out - TV speakers off - audio

PRESET CAPTION

COMPONENT1

adjustable by the external amplifier only.

MANUAL CAPTION

COMPONENT2

SKIP

INPUT LABEL

HDMI

VIDEO1

VCR

VIDEO2

CHANNELS

OTHER ADJ.

VIDEO3

TO MOVE CURSOR

VIDEO4

DVD

CHANNEL SCAN - Select FAV or ALL.

TO SELECT LABEL

PRESS ACTION TO RETURN

PRESS ACTION TO RETURN

Note: Use remote numeric keypad to select desired FAV		CHANNELS
channels.		INPUT LABEL
FAVORITES - To enter up to 16 favorite channels. Use	COMPONENT1
	HDMI	SKIP
remote control numeric keypad to select desired	VIDEO2	VCR
channels.	VIDEO1
	VIDEO3

CHANNELS

For model CT-30WC14 only.

TO MOVE CURSOR

CH. SCAN

ALL

TO SELECT LABEL

PRESS ACTION TO RETURN

FAVORITES

ENTER CHANNEL 3

FAVORITE CHANNELS

3

Procedure

: ADD

•

Press CH or CH to select the desired Video

: DELETE

input.

OTHER ADJ.

•

Press

VOL or VOL to select desired preset

PRESS ACTION FOR MAIN MENU

OTHER ADJ.

input label (see chart below).

Highlight OTHER ADJ. and press VOL

to display the sub

INPUT LABEL CHART

sub-menu.

PRESET

REASON FOR SELECTING

• PRESET CAPTION - To enter channel numbers for

LABELS

popular TV stations.

VCR

Select when VCR is connected to video input.

Procedure

DVD

Select when DVD is connected to video input.

•

Press CH

to select desired preset caption.

SKIP

Select to skip unused video input when

•

Then use the remote numeric keypad to select

pressing TV/VIDEO button.

desired channel (refer to your local TV guide).

CABLE

Select when CABLE box is connected

to video input.

CHANNELS

CHANNELS

DBS

Select when DBS is connected to video input.

PRESET CAPTION

PRESET CAPTION

- - -

Select when digital TV set-top-box is

ABC

- - -

A&C

DTV STB

MANUAL CAPTION

CBS

- - -

AMC

- - -

connected

INPUT LABEL

FOX

- - -

BET

- - -

to video input.

NBC

- - -

BRAVO

- - -

PBS

- - -

CNBC

- - -

PVR (Personal

Select when a personal video recorder is

CNN

- - -

CNN/SI

- - -

ESPN - - -

COMEDY

- - -

Video Recorder)

connected to video input.

HBO

- - -

COURT

- - -

OTHER ADJ.

PRESS FOR MORE CHANNELS

GAME

Select when video game is connected

PRESS ACTION TO RETURN

PRESS ACTION TO RETURN

to video input.

Note: To

delete a channel, press

VOL while channel

AUX

Select when other components are

number is highlighted.

connected.

• MANUAL CAPTION - To enter numbers and captions

_____

Select to delete input label.

manually.

20 z

ICON MENUS OPERATION

TIMER						Procedure
						•	Press VOL	to select.
							• OFF - Turns Lock function off.
Note: Use CH				or CH	to highlight and use VOL or
							• GAME - Lock CH 3, 4 and Video inputs.
VOL			to select.
							• CHANNEL - Lock up to four channels.
					TIMER		• ALL - Locks all channels and video inputs.
					NO
				SLEEP				LOCK
				TIMER 1				LOCK MODE	GAME
				TIMER 2				LOCKS CH 3, 4 AND
				CLOCK SET				VIDEO INPUTS
				PRESS ACTION FOR MAIN MENU
								TO SELECT LOCK MODE
SLEEP - Select to turn TV off in 30, 60, or 90 minutes.
Select NO to turn sleep timer off.
								PRESS ACTION TO RETURN
TIMER 1 and TIMER 2 - Select one or both timers to							ACTION
turn the TV on and off at selected times, on a selected						•	Press	then CH to highlight HOW LONG?.
channel, and on selected days.						•	Press VOL to select 12 Hours, 24 Hours, 48 Hours or
Notes:							ALWAYS.

•The television automatically turns OFF after 90 minutes Note: If GAME, CHANNEL or ALL is selected, and if a blocked

when turned ON by the TIMER. If the OFF time is

channel or video input is selected, the message

selected or if a key is pressed, the automatic OFF after

LOCKED displays in the upper left corner of the TV

90 minutes will be cancelled.

screen.

• The TIMER is active when the television is OFF or ON.

V-CHIP SET - V-Chip technology allows parents to use

The television will switch to the selected channel at the

the TV rating codes to block programs that they feel

selected time set in the TIMER.

are inappropriate for their children to watch. Split will

CLOCK SET - Set the time of day and the day of the

also be blocked automatically.

week.

LOCK

LOCK

LOCK SET

OFF

BLOCK PROGRAMS:

V-CHIP SET

U.S. TV PROGRAMS

CREATE CODE FIRST - Use the remote numeric

SETTING:

keypad to enter a four-digit secret code (Use a code

HOW LONG?

12 HOURS

that is easy to remember and record it in a safe

CODE

CHANGE CODE - - - -

place).

PRESS ACTION FOR MAIN MENU

LOCK

Procedure

CREATE

_ _ _ _

•

Press CH

to highlight Enter Code.

• Use the numeric keypad to enter your four digit code.

CODE FIRST

(Use a code that is easy to remember and record it in

a safe place.)

•

Press CH to highlight V-CHIP SET.

•

Press

VOL or VOL

to select desired mode: U.S.

PRESS ACTION FOR MAIN MENU

TV Programs, U.S.

Movies, Canadian English or

LOCK SET - To prevent video games, VCR tapes and

Canadian French mode.

all channels and video modes from being viewed.

•

Press CH to highlight SETTING.

•

Press VOL or VOL

to display desired rating chart:

LOCK

U.S. TV Programs, U.S. Movies, Canadian English or

LOCK SET

OFF

Canadian French.

V-CHIP SET

BLOCK PROGRAMS:

•

Press VOL to select ON or OFF.

U.S. TV PROGRAMS

SETTING:

•

Press CH

to select VIEW NR PROGRAMS? for U.S.

HOW LONG?

12 HOURS

CODE

CHANGE CODE - - - -

TV Programs and U.S. Movies or VIEW E PROGRAMS

for Canadian English and Canadian French.

PRESS ACTION FOR MAIN MENU

Notes:

•

Press VOL to select YES or NO.

•If you do not remember your code, LOCK will unlock in 12, 24, or 48 hours, depending on the current set-up. Be cautious when selecting ALWAYS. If ALWAYS is selected and you forget your secret code, the TV must be serviced by a qualified technician to clear the LOCK set-up.

•If you select CHANGE CODE, and you change your code from the one used in the LOCK menu, your new code becomes the controlling code.

ENGLISH

21 z

Customer Caution

The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) as per FCC Rules Section 15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of programming:”

• Emergency Bulletins (Such as EAS messages, weather warnings and others)

• Locally originated programming

• News

• Political

• Public Service Announcements

• Religious

• Sports

• Weather

22 z

ENGLISH

ICON MENUS OPERATION

U.S TV Programs

This TV model features “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. Split will also be blocked automatically.

LOCK

U. S. TV PROGRAMS

OFF

VIEW NR PROGRAMS? YES

SETTING: BASIC

TV-Y

TV-Y7 FV

- - - - - - - - - - - - - - - - - - - - -

TV-G

TV-PG V S L D

TV-14 V S L D

TV-MA V S L

PRESS ACTION TO RETURN

Note: By selecting “Yes”, NR programs will be received. By selecting “NO”, NR programs will be blocked (See Customer Caution on this page).

Procedure

•Press CH to select SETTING.

•Press VOL to select BASIC or DETAILED.

BASIC - Allows you to select only general ratings such as TV-Y, TV-PG, etc.

DETAILED - Allows you to select both general ratings

	and content such as V, L, etc.
•	Press CH or CH to move between different ratings.
•	Use	VOL or VOL	to select ratings you want to
	block (RED) and unblock (GREEN).
•	Press	ACTION
		to return to V-CHIP SET.

•Press CH to select HOW LONG?.

•	Press	VOL or VOL to select 12, 24, 48 hours or
	ALWAYS.
•	Press	ACTION
		to return to Main Menu, then press CH

to exit.

	U.S. TV Programs Ratings Chart Description
	NR	Not Rated. SEE CUSTOMER CAUTION above.
		All children. The themes and elements in this
	TV-Y	program are specifically designed for a very young
		audience, including children from ages 2-6.
		Directed to older children. Themes and elements
	TV-Y7	in this	program may include	mild physical or
		comedic violence, or may frighten children under
		the age of 7.
		General audience. It contains little or no violence,
	TV-G	no strong language, and little or no sexual dialogue
		or situations.
		Parental guidance suggested. The program may
	TV-PG	contain	infrequent coarse	language, limited
		violence, some suggestive sexual dialogue and
		situations.
		Parents strongly cautioned. This program may
	TV-14	contain sophisticated themes, sexual content,
		strong language and more intense violence.
		Mature audiences only. This program may contain
	TV-MA	mature themes, profane language, graphic violence,
		and explicit sexual content.
	FV	FANTASY/CARTOON VIOLENCE
	V	VIOLENCE
	S	SEX
	L	OFFENSIVE LANGUAGE
	D	DIALOGUE WITH SEXUAL CONTENT

U.S. Movies

This TV model features “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. Split will also be blocked automatically.

		LOCK
	LOCK SET	OFF
	V-CHIP SET	BLOCK PROGRAMS:
		U.S. MOVIES
		SETTING:
	HOW LONG?	12 HOURS
	CODE	CHANGE CODE - - - -

PRESS ACTION FOR MAIN MENU

Note: Some movies are not rated for a variety of reasons. Old movies and foreign films are usually not rated.

					LOCK
			U.S. MOVIES			OFF
			VIEW NR PROGRAMS?			YES
				G
				PG
				PG-13
				R
				NC-17
				X
			PRESS ACTION TO RETURN
Procedure
•	Press CH or CH			to move between different ratings.
•	Use	VOL or VOL		to select ratings you want to
	block (RED) and unblock (GREEN).
		ACTION
•	Press		to return to V-CHIP SET.

•Press CH to select HOW LONG?.

ICON MENUS OPERATION

U.S. Movies (cont.)

	•	Press		VOL or VOL	to select 12, 24, 48 hours or
		ALWAYS.
	•	Press	ACTION
				to return to Main Menu, then press CH
		to exit.
		U.S. Movies Ratings Chart Description
				CONTAINS NO RATING (NOT RATED) AND NA
		NR		(NOT APPLICABLE) PROGRAMS. Movie has
				not been rated or rating does not apply.
		G		GENERAL AUDIENCES. All ages admitted.
		PG		PARENTAL GUIDANCE SUGGESTED. Some
				material may not be suitable for children.
				PARENTS STRONGLY CAUTIONED. Some
		PG-13		material may be inappropriate for children under
				13.
		R		RESTRICTED. Under 17 requires accompanying
				parent or adult guardian.
		NC-17		NO ONE 17 AND UNDER ADMITTED.
		X		ADULTS ONLY.

Canadian English

The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two ratings systems used in Canada. Split will also be blocked automatically.

			LOCK
LOCK SET					OFF
			BLOCK PROGRAMS:
V-CHIP SET
			CANADIAN ENGLISH
				SETTING:
HOW LONG?
				12 HOURS
CODE	CHANGE CODE
						- - - -

PRESS ACTION FOR MAIN MENU

Note: E (Exempt) programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

				LOCK
			CANADIAN ENGLISH
					OFF
			VIEW E PROGRAMS?		YES
			C
			C8+
			G
			PG
		14+
		18+
			PRESS ACTION TO RETURN
Procedure
•	Press CH or CH			to move between different ratings.
•	Use	VOL or VOL		to select ratings you want to
	block (RED) and unblock (GREEN).
		ACTION
•	Press		twice to return to V-CHIP SET.

•Press CH to select HOW LONG?.

•	Press	VOL or VOL	to select 12, 24, 48 hours or
	ALWAYS.
•	Press	ACTION
		to return to Main Menu, then press CH

to exit.

Canadian English Ratings Description

.
			Exempt - Exempt programming includes:
		E	news,	sports,	documentaries	and other
			information programming, talk shows, music
			videos, and variety programming.
			Programming intended for children under age
		c	8. No offensive language, nudity or sexual
			content.
			Programming		generally	considered
		C8+	acceptable for children 8 years and over. No
			profanity, nudity or sexual content.
		G	General	programming, suitable for all
			audiences.						ENGLISH
		PG	Parental Guidance suggested. Some material
			may not be suitable for children.
			Programming contains themes or content
			which may not be suitable for viewers under
		14+	the age of 14. Parents are strongly cautioned
			to exercise discretion in permitting viewing
			by pre-teens and early teens.
		18	ADULTS ONLY

Canadian French

The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. Split will also be blocked automatically.

			LOCK
LOCK SET					OFF
			BLOCK PROGRAMS:
V-CHIP SET
			CANADIAN FRENCH
				SETTING:
HOW LONG?
				12 HOURS
CODE	CHANGE CODE
						- - - -

PRESS ACTION FOR MAIN MENU

Note: E (Exempt) programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

				LOCK
			CANADIAN FRENCH		OFF
			VIEW E PROGRAMS?		YES
				G
				8 ANS+
				13ANS+
				16ANS+
				18ANS+
			PRESS ACTION TO RETURN
Procedure
•	Press CH or CH			to move between different ratings.
•	Use	VOL or VOL		to select ratings you want to
	block (RED) and unblock (GREEN).
		ACTION
•	Press		twice to return to V-CHIP SET.

•Press CH to select HOW LONG?.

•	Press	VOL or VOL	to select 12, 24, 48 hours or
	ALWAYS.
•	Press	ACTION
		to return to Main Menu, then press CH

to exit.

23 z

ICON MENUS OPERATION

Canadian French (cont).

Canadian French Ratings Description

			E	Exempt - Exempt programming.
				General - Programming				intended
			G	for audience of all ages. Contains
				no violence, or			the	violence
				content is minimal or is depicted
				appropriately.
				8+ General - Not recommended for
				young	children.		Programming
			8 ans +	intended for a broad audience but
				contains	light	or occasional
ENGLISH				violence.	Adult		supervision
				recommended.
				Programming may not be suitable
				for children under the age of 13 -
			13 ans +	Contains	either	a	few	violent
				scenes or one or more sufficiently
				violent scenes to affect them.
				Adult	supervision			strongly
				suggested.
				Programming may not be suitable
			16 ans +	for children under the age of 16 -
				Contains	frequent		scenes		of
				violence or intense violence.
				Programming restricted to adults.
			18 ans +	Contains	constant		violence		or
				scenes of extreme violence.
		Main and Split Blocking Message

If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the TV is turned off or until all settings are reprogrammed.

Note: If you enter your four-digit secret code to override rating blocks, you must reset all rating blocks by either reprogramming or turning the TV off.

Main Picture

Split Frame

PROGRAM

RATING

EXCEEDED

PROGRAM RATING EXCEEDED

ACCESS CODE - - - -

ACCESS _ _ _ _

CODE

Note: To unlock split frame, press

SPLIT CTRL

button,

will be displayed in split frame, then enter four-digit secret code.

SET UP

While the desired sub menu is highlighted, press VOL to select or activate feature.

				SET UP
IDIOMA/
				ENGLISH
LANGUE
CC	ON MUTE				NO
CC	MODE				OFF

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

IDIOMA/LANGUE - Select to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).

CC ON MUTE - Activates the onscreen Closed Caption feature when the MUTE button on the remote control is pressed. To deactivate press MUTE button again.

		SET UP
IDIOMA/		ENGLISH
LANGUE
CC	ON MUTE	NO
		OFF
CC	MODE
OTHER ADJ.

PRESS ACTION FOR MAIN MENU

CC MODE - This television contains a built-in decoder

that displays CC (Closed Captioned) text across the screen (white or colored letters on black background). It allows the viewer to read the dialogue of a television program or other information. The program viewed must include Closed Captioning for the feature to work. Activate the onscreen Closed Caption feature by selecting one of the following modes.

•OFF - When Closed Caption is not desired.

•C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture). Text may be in any language.

•C2 to C4 - For other modes of video related information.

•T1 to T4 - For program guide and other information to be displayed, when available. (Blocks a large portion of the picture on the television screen).

Note: C1 mode is recommended for viewing Closed Captions.

24 z

ICON MENUS OPERATION

	SET UP (cont.)
	OTHER ADJ.								• IMAGE SHIFT - This feature prevents the image
	Highlight OTHER ADJ. and press VOL to enter sub sub-								retention associated with viewing	a fixed image	for a
	menu field.								long period of time. When this feature is selected (ON),
									the image is shifted up/down,	left/right in	small
	Note: While sub sub-menu features are highlighted, press
									increments at turn ON, when changing channels or when
	VOL to adjust or activate.
									the fixed image is left On for a long time. Selecting ON is
					SET UP				recommended for this feature.
				MODE		CABLE
				AUTO PROGRAM
				MANUAL PROGRAM
		OTHER ADJ.		AUTO POWER ON			OFF
				CHAN BANNER			ON
				GEOMAGNETIC CORR
				PRESS FOR MORE
			PRESS ACTION TO RETURN

•MODE - To select TV (antenna) or CABLE mode depending on the signal source.

•AUTO PROGRAM - To automatically program all channels with a signal.

•MANUAL PROGRAM - To manually add or delete channels.

•AUTO POWER ON - Select SET to power up the TV at the same time as the Cable box or other components or select OFF. When this feature is On, Timer functions will be disabled.

•CHAN BANNER - Select ON to display onscreen banner when changing channels.

•GEOMAGNETIC CORR - This feature is used to adjust discoloration of the picture due to earth’s magnetic field in the area.

Procedure

•Press VOL to display adjustment menu.

•	Press	VOL or VOL				to adjust discoloration in
	picture.
		SET UP
						GEOMAGNETIC CORRECTION
	MODE	CABLE
	AUTO PROGRAM					0 - - - - - - - - - l - - - - - - - - -
	MANUAL PROGRAM
OTHER ADJ. AUTO POWER ON			OFF
	CHAN BANNER		ON
	GEOMAGNETIC CORR					TO ADJUST
	PRESS FOR MORE					PRESS ACTION TO EXIT
	PRESS ACTION TO RETURN

•TILT CORRECTION - This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.

Procedure

•Press VOL to display adjustment menu.

•	Press	VOL or VOL			to adjust picture tilt.
		SET UP
						TILT CORRECTION
	PRESS	FOR MORE					0
	TILT CORRECTION
	IMAGE SHIFT		OFF
	ON RECOMMENDED					TO ADJUST
OTHER ADJ.						PRESS	ACTION
						TO	EXIT
	PRESS ACTION TO RETURN

ENGLISH

25 z

ENGLISH

TROUBLESHOOTING CHART

Troubleshooting Chart

Before calling for service, determine the symptoms and follow suggested solutions.

		AUDIO				VIDEO					Solutions
											Adjust antenna location and connection
	Noisy Audio				Snowy Video
											Adjust antenna location and connection
											Check antenna lead-in wire
				Multiple Image /
	Noisy Audio
				Color shift in picture
											Move television away from electrical appliances, lights,
											vehicles and medical equipment
	Noisy Audio				Interference
											Increase Volume
											Check Mute
											Check television SPEAKERS on/off
	No Audio
				Normal Video
											Change Channel
											Set TV or Cable Mode Properly
											Check Antenna Cables
	Noisy Audio
				No Video with Snow
											Check if Power Cord is Plugged into Active Outlet
						?					Adjust Brightness and Audio Controls
											Change Channel
											Check Cable Connections
											Program the Remote Control Again
	No Audio			No Video / No Split							Check Second Video Source Operation
											Make sure that a PC is not connected to HDMI input.
											This is a normal condition to prevent image burn-in. This feature can be
				Picture shifts slightly (horizontally or							turned off. However, turning off this feature may result in image
				vertically) when turned on, changing							retention on screen. (refer pg. 25)
	Normal Audio
				channels or within a duration of two
				(2) hours of viewing.
											Confirm that cables are in the correct jacks
											Adjust Color Settings
											Change Channel
	Normal Audio					No Color
											Check for broken pins on S-Video cable
											Check if Audio Is Set To Stereo or Mono, Not SAP
	Wrong Audio			Normal Video
											Change CC (Closed Captioning) from Text Mode
	Normal Audio
				Black Box on Screen
											Replace Remote Control Batteries
	Normal Audio			Normal Video
		Intermittent		Remote Control Operation

Control panel may be locked. Press ACTION and TV/VIDEO buttons No effect when pressing TV front control panel keys on the TV front simultaneously, then quickly press ACTION and

VOL buttons simultaneously.

26 z

INDEX

Index

Numerics

3D Y/C Filter 19

A

AC Power Supply Cord 5 AI Sound 19

Amplifier Connection 8

Antenna Connection 5 ASPECT Button 10 Audio 19

Auto Power On 25

Auto Program 6, 25

B

Balance 19

Basic Menu Navigation 18 Bass 19

BBE 19

BBE Button 10

Brightness 19

C

Cable / Antenna Connection 5 Cable Box Connection 7 Cable Connection 5 Canadian English 23 Canadian English Ratings Description 23

Canadian French 23, 24

Canadian French Ratings Description 24

Care and Cleaning 4 CC Mode 24

CC On Mute 24

Chan Banner 25

Channel Scan 20 Channels 20 Cinema 19 Clock Set 21

Codes For Cable Box 16 Codes For Cassette Decks 17 Codes For CD Player 17 Codes For DBS 16

Codes For DVD 16 Codes For Personal Video Recorders 17

Codes For Receivers 17 Codes For VCR 16 Color 19

Color Matrix 19

Color Temp 19 Compatible Formats 9

Component Codes 15, 16, 17 Create Code First 21 Customer Record 4

D

Digital TV - Set-Top Box (DTV-STB) or DVD Connection 8

Direct Video Input Selection 11

F

Favorites 20

FCC Information 2 Feature Chart 4 Freeze Button 11 Front Control Panel 8

G

Geomagnetic Corr 25 Geomagnetic Correction 6

H

HDMI (High Definition Multimedia Interface) input connection 9

HDMI IN 20

I

Icon Menus Operation 19 Idioma/langue 6, 24 Image Shift 25

Important Information 1 Initial Set Up Menu 6 Input Label 20

Input Label Chart 20 Installation 5

L

Lock 21 Lock Set 21

M

Main and Split Blocking Message 24 Main Picture Freeze Feature 11 Manual Program 25

Mode 6, 19, 25 Mono 19 MPEG NR 19

N

Natural Color 19 Normal 19

O

Operating a Cable Box 14 Operating a cassette deck 14 Operating a CD 13 Operating a DBS 13 Operating a DTV 14 Operating a DVD 13

Operating a PVR (Personal Video Recorder) 14

Operating a Receiver 14 Operating a VCR 13

Operating Components with Remote Control 13

Optional Cable Connections 5 Optional Equipment Connections 7 Other Adj. 19, 20, 25

P

PIC Mode 19 Picture 19

Preset Caption 20

Program Out Connection 9

Programming The Remote Control 15

Programming Without A Code 15

R

Remote Control Battery Installation 5

Remote Control Operation 12

S

SAP 19

SAP Button 10

Screen 4

Search Button 11

Set Up 24

Sharpness 19

Sleep 21

Speakers 20

Special Features 10

Specifications 4

Split CTRL Button 11

Split Operation 10

Split Operation With a Cable Box 10

Split Operational Buttons 11

Standard 19

Stereo 19

Surround 19

T

Table of Contents 3

Television Location 5

Tilt Correction 6, 25

Timer 21

Timer 1 And Timer 2 21

Tint 19

Treble 19

Troubleshooting Chart 26

TV/Video Button 11

U

U.S TV Programs 22

U.S. Movies 22

U.S. Movies Ratings Chart

Description 23

U.S. TV Programs Ratings Chart

Description 22

V

V-Chip Set 21

VCR and Cable Box Connection 7

VCR Connection 7

Video NR 19

Vivid 19

VM (Velocity Modulation) 19

ENGLISH

27 z