English
Español
LG Electronics
BLUETOOTH® Mono Headset
HBM-210 User manual
All rights reserved.
LG Electronics Inc., 2009
Note : For the best performance and prevent any damage to, or misuse of the -210, please read all of the information carefully prior to using the HBM-210.
modifications or changes to this manual due to errors or inaccuracies of stated information shall only be made by LG Electronics Inc.
Table of Contents
Introduction |
3 |
|
|
- Included in Package |
3 |
|
|
Part Description |
4 |
|
|
How to use |
4 |
|
|
- Change direction |
4 |
|
|
- Charging |
5 |
|
|
- Low battery |
5 |
|
|
- Power on |
5 |
|
|
- Power off |
5 |
|
|
- Pairing |
5 |
|
|
Easy Pairing |
6 |
|
|
Manual Pairing |
6 |
|
|
- Auto Reconnect |
7 |
|
|
- Volume control |
7 |
|
|
- Calling |
7 |
|
|
Answering a call |
7 |
|
|
Making a call |
7 |
|
|
Voice dialing |
8 |
|
|
Last number redial |
8 |
|
|
Ending a call |
8 |
|
|
Transferring a call |
8 |
|
|
Call waiting |
8 |
|
|
Call Reject |
8 |
|
|
Summary of button functions |
9 |
|
|
LED indication |
9 |
|
|
Troubleshooting |
10 |
|
|
Specification |
10 |
|
|
Precautions |
11 |
|
|
Declaration of confirmation |
13 |
|
|
Additional information |
13 |
|
|
Limited warranty |
16 |
|
|
Important safety information |
16 |
|
|
Introduction
wireless can be used
or
Ear loop |
manual |
Charger
3
Description of parts
Front
Charging Port
LED Indicator
MFB
(Multi-Function Button)
Speaker
Volume UP / Down
Button
Mic
How to use
Change direction
How to use
Charging
-Connect the charger to the charging
-When the charger is connected, with the Headset will turn off automatically, While charging, the LED indicator
-The buttons will not function while
-It takes 2 hours to fully charge the
-When charging is complete, the LED
-A low battery tone will play once every 30 seconds.
-If the battery is not charged, the Headset will turn off.
-Press and Hold the MFB for 4 seconds.
The power will turn on and a booting tone will play.
Power off
-Press and hold the MFB for 4 secondsA shutdown tone will play, the
and the power will turn off.
-Prior to using the Headset for the Bluetooth-enabled handset.
-There are 2 Pairing Mode Methods
5
How to use
1) Easy Pairing
With the Power off, press and hold the MFB for 4 seconds, to turn on the HBM-210.
The Headset will enter Auto-Reconnect mode, for 10 seconds (If your headset has been previously paired to the handset, the headset will automatically reconnect to the handset, when the HBM-210 is powered on.)
After 10 seconds, the HBM-210 will automatically enter Paring Mode.When the headset enters Pairing Mode, the LED indicator will show
a solid blue light
Using your handset, find the Bluetooth Menu and “search for” or “add” new devices.
Select “LG HBM-210” from the list of devices and pair it with your handset.When asked for the Pass/PIN code during the pairing procedure,
please enter “0000” (4 Zeros).
Once pairing has completed successfully, you will hear a beep.
After pairing successfully, be sure to “Connect” to the LG HBM-210.If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.If the headset is in Pairing mode connected to a handset, the HBM
2)Manual Pairing
With the Power off, press and hold the MFB for 6 seconds.When the Headset enters Pairing Mode, the LED indicator will
show solid blue light.
Using your handset, find the Bluetooth Menu and “search for” or “add” new devices.
Select “LG HBM-210” from the list of devices and pair it with your handset.
When asked for the Pass/Pin code during the pairing procedure, please enter “0000” (4 Zeros)
Once pairing has completed successfully, you will hear a beep.After pairing successfully, be sure to “Connect” to the LG HBM-210.If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
How to use
If the headset is in Pairing mode for three minutes without being connected to a handset, the HBM-210 will automatically turn off.
Auto Reconnect
-When the HBM-210 turns off (accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The Headset and handset will automatically reconnect when the HBM-210 is turned back on(as long as both devices are within the required range of 33ft. or 10m).
[ Out of range ]
-When the HBM-210 and your handset are separated by a distance of 33 feet (10 meters) or more, the Headset and handset will disconnect. When the handset and HBM-210 are brought back within the required distance, the HBM-210 will automatically reconnect with the handset.
-If the Headset and handset do not automatically reconnect when they are back within the required range, briefly press the MFB on the HBM210 to reconnect manually.
Volume control
-Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
-There are eight levels of speaker volume.
Calling
Answering a call
-When there is an incoming call, the Headset will ring.
-Briefly press the MFB to answer an incoming call.
Making a call
-If you make a call from the handset, the call will (subject to phone settings) automatically transfer to the Headset. If the call is not automatically transferred, you can manually transfer the call by briefly pressing the MFB on the HBM-210 (handset and headset must be paired).
6 |
7 |
How to use
Voice dialing*
-Briefly press the MFB to activate “Voice Command”.
You will get the best results if you record the voice dialing tag through your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible that performing this action will activate Last Number redial.
Last number redial*
-Press and hold the MFB for 1second to activate “Last Number Redial”. The headset will beep, and call the last number dialed.
Ending a call
- Briefly press the MFB.
Transferring a call*
-While on a call on your handset, briefly press the MFB to transfer the audio to the Headset.(headset and handset must be paired).
-And to transfer a call from the Headset to Handset, press and hold the VOLUME UP button for 5 seconds.
Call waiting*
-Answer a second call without hanging up the first call by pressing the MFB for 1second. Press the MFB for 1second to return to the original call.
-Briefly press the MFB to terminate both calls at once.
Call Reject*
-Activate Call Reject by pressing the MFB for 1second when the handset rings.
* It is possible to use these functions only when your handset supports them. For further information about using these features, please consult your handset's user manual.
Summary of button functions
|
|
|
|
|
|
|
Function |
|
|
HBM-210 |
Action |
|
|
|
Status |
||
|
|
|
|
|
|
|
Power on |
Power off |
Press the MFB for 4 seconds. |
||
|
|
|
|
||
|
Power off |
Power on |
Press the MFB for at least 4 seconds. |
||
|
Volume up |
Talking |
Briefly press the Volume Up button. |
||
|
Volume down |
Talking |
Briefly press the Volume Down button. |
||
|
Transferring a call |
Talking |
- Handset to Headset |
||
|
|
|
|
|
Briefly press the MFB (must be paired) |
|
|
|
|
|
- Headset to Handset |
|
|
|
|
|
Press and hold the VOLUME UP |
|
|
|
|
|
button for 5 seconds. |
|
|
|
|
||
|
Answering a call |
Ringing |
Briefly press the MFB. |
||
|
Ending a call |
Talking |
Briefly press the MFB. |
||
|
Call waiting |
Talking |
Press the MFB for 1 second. |
||
|
Last number redial |
Idle |
Press the MFB for 1 second. |
||
|
|
|
|
||
|
Voice dialing |
Idle |
Briefly press MFB. |
||
|
(handset must support) |
|
|
||
|
Call reject |
Ringing |
Press the MFB for 1 second. |
||
|
|
|
|
||
|
Pairing Mode(Manual) |
Power off |
Press the MFB for 6 seconds. |
||
|
|
|
|
|
|
|
|
|
|
|
LED indication |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Function |
|
HBM-210 Status |
Action |
||
|
Operating |
Power on |
The blue LED light flickers 4 times. |
|||
|
|
Power off |
The blue LED light flickers 4 times |
|||
|
|
|
|
|
and then turns off. |
|
|
|
Pairing mode |
The blue LED light stays on. |
|||
|
|
Headset / handsfree |
The blue LED light flickers |
|||
|
|
Profile connected |
2 times every 5 seconds. |
|||
|
|
Call connected |
The blue LED light flickers |
|||
|
|
|
|
|
2 times every 5 seconds. |
|
|
Charging |
Charging |
The blue LED stays on. |
|||
|
|
Charging complete |
LED turns off. |
|||
|
|
|
|
|
|
|
8 |
9 |
Troubleshooting
Does not turn on |
Check whether the battery |
Charge the battery. |
|
of the HBM-210 is fully |
|
|
charged. |
|
Unable to |
Check whether |
Determine whether your |
communicate with |
the handset supports |
handset supports |
the LG Bluetooth® |
the Headset or Handsfree |
the Headset or Handsfree |
Headset HBM-210 |
Bluetooth profiles. |
Bluetooth profiles. |
|
Check whether the battery |
Charge the battery. |
|
of the HBM-210 is low. |
|
Unable to pair the |
Check and make sure the |
Press and hold the MFB for |
HBM-210 with the |
Headset is on. |
at least 4 seconds to turn |
Bluetooth® device |
|
on the Headset. |
|
Check and make sure |
With the power off, press |
|
the Headset is placed |
and hold the MFB for |
|
in pairing mode. |
6 seconds to place the |
|
|
headset in pairing mode. |
Low sound (speaker) |
Check the speaker volume. |
lncrease the volume level. |
|
|
|
Specification
ITEM |
Description |
Bluetooth® specification |
V2.1 (Handsfree / Headset profiles) |
Battery |
3.7V, LiPolymer, 110mAh |
Talk Time |
Up to 11 hours |
Stand by time |
Up to 400 hours |
Charging time |
< 2 hours |
Operation temperature |
-10 ~ 60 |
Dimension / weight |
19.5mm(W) X 44.5mm(L) X 9.8mm(H) / 10.4g |
|
|
Precautions
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to flammables.
Do not place or keep the unit near flammables.
10 |
11 |