LG HR925M Owner's Manual

OWNER’S MANUAL

Blu-ray Disc™/DVD Player with built-in HDD & HD Tuner

Please read this manual carefully before operating your set and retain it for future reference.

FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER.

HR925M/HR929M

www.lg.com

1 GettingStarted

2 Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle

is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s instruction has been adhered to.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

			Getting Started 3
	This device is equipped with a portable battery or	Disposal of waste batteries/accumulators
	accumulator.	1. When this crossed-out wheeled bin
	Safety way to remove the battery or the
		symbol is attached to batteries/accu-
	battery from the equipment: Remove the
		mulators of Your product it means they
	old battery or battery pack, follow the steps
		are covered by European Directive
	in reverse order than the assembly. To prevent
		2006/66/EC.
	contamination of the environment and bring on
		2. This symbol may be combined with
	possible threat to human and animal health, the
		chemical symbols for mercury(Hg),
	old battery or the battery put it in the appropriate
		cadmium(Cd) or lead(Pb) if the battery
	container at designated collection points. Do
		Contains more that 0.0005% of mer-
	not dispose of batteries or battery together with
		cury, 0.002% of cadmium or 0.004%
	other waste. It is recommended that you use
		of lead.
	local, free reimbursement systems batteries and
		3. All batteries/accumulators should
	accumulators. The battery shall not be exposed to
		be disposed separately from the
	excessive heat such as sunshine, fire or the like.
		municipal waste stream via designated
	CAUTION: The apparatus shall not be exposed to
		collection facilities appointed by the
	water (dripping or splashing) and no objects filled	government or the local authorities.
	with liquids, such as vases, shall be placed on the	4. The correct disposal of Your old batter-
	apparatus.	ies/ accumulators will help to prevent
	Disposal of your old appliance	potential negative consequences for
		the environment, animal and human
	1. When this crossed-out wheeled bin
		health.
	symbol is attached to a product it
		5. For more detailed information about
	means the product is covered by the
		disposal of Your old batteries/ accu-
	European Directive 2002/96/EC.
		mulators, please contact Your city offi
	2. All electrical and electronic products
		ce, waste disposal service or the shop
	shall be disposed of separately	where You purchased the product.
	from the municipal waste stream	For Wireless product European Union Notice
	via designated collection facilities
	appointed by the government or the		LG Electronics hereby
	local authorities.		declares that this/
	3. The correct disposal of your old		these product(s) is/are
	appliance will help prevent potential	in compliance with the essential requirements and
	negative consequences for the	other relevant provisions of Directive 1999/5/EC,
	environment and human health.	2004/108/EC, 2006/95/EC and 2009/125/EC.
	4. For more detailed information about	Please contact to the following address for
	disposal of your old appliance, please	obtaining a copy of the DoC (Declaration of
	contact your city office, waste disposal	Conformity).
	service or the shop where you	European Standards Centre:
	purchased the product.	Krijgsman 1, 1186 DM Amstelveen The Netherlands
		Indoor use only.
		RF Radiation Exposure Statement
		This equipment should be installed and operated
		with minimum distance 20cm between the radiator
		and your body.

1 GettingStarted

1 GettingStarted

4 Getting Started

	POWER: This unit operates on a mains supply							Notes on Copyrights
								yy Recording equipment should be used only for
	of 200-240V~, 50/60Hz.
								lawful copying and you are advised to check
	WIRING: This unit is supplied with a BS 1363
								carefully what is lawful copying in the area
	approved main plug. When replacing the							in which you are making a copy. Copying of
	fuse, always use of the same rating approved							copyright material such as films or music is
	to BS 1362. Never use this plug with the fuse							unlawful unless permitted by a legal exception
	cover omitted. To obtain a replacement fuse							or consented to by the rights owner.
	cover contact your dealer. If the type of plug							yy This product incorporates copyright protection
	supplied is not suitable for the mains sockets in
								technology that is protected by U.S. patents
	your home, then the plug should be removed
								and other intellectual property rights. Use of
	and a suitable type fitted. Please refer to the
								this copyright protection technology must be
	wiring instructions below:
								authorized by Rovi Corporation, and is intended
	WARNING: A mains plug removed from the
								for home and other limited viewing uses only
	mains lead of this unit must be destroyed. A							unless otherwise authorized by Rovi Corporation.
	mains plug with bared wires is hazardous if							Reverse engineering or disassembly is prohibited.
	inserted in a mains socket. Do not connect							yy CONSUMERS SHOULD NOTE THAT NOT ALL
	either wire to the earth pin, marked with the
								HIGH DEFINITION TELEVISION SETS ARE FULLY
	letter					or with the earth symbol or coloured
	green or green and yellow. If any other plug is							COMPATIBLE WITH THIS PRODUCT AND MAY
								CAUSE ARTIFACTS TO BE DISPLAYED IN THE
	fitted, use same rating of fuse in the plug.
								PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
	IMPORTANT: The wires in this mains lead are
								PICTURE PROBLEMS, IT IS RECOMMENDED
	coloured in accordance with the following							THAT THE USER SWITCH THE CONNECTION
	codes:							TO THE ‘STANDARD DEFINITION’ OUTPUT. IF
	- BLUE: NEUTRAL, BROWN: LIVE - As the							THERE ARE QUESTIONS REGARDING OUR TV SET
	colours of the wires in the mains lead of this							COMPATIBILITY WITH THIS MODEL 625p UNIT
	unit may not correspond with the coloured							PLEASE CONTACT OUR CUSTOMER SERVICE
	marking identifying the terminals in your plug,							CENTRE.
	proceed as follows: The wire which is coloured							yy Because AACS (Advanced Access Content
	blue must be connected to the terminal which							System) is approved as content protection
	is marked with the letter N or coloured black.							system for BD format, similar to use of CSS
	The wire which is coloured brown must be							(Content Scramble System) for DVD format,
	connected to the terminal which is marked							certain restrictions are imposed on playback,
	with the letter L or coloured red.							analogue signal output, etc., of AACS protected
								contents. The operation of this product and
		>>Caution						restrictions on this product may vary depending
								on your time of purchase as those restrictions
	yy Watching a 3D						content for a long period	may be adopted and/or changed by AACS after
		time may cause dizziness or tiredness.
								the production of this product.
	yy It is not recommended to watch a movie							yy Furthermore, BD-ROM Mark and BD+ are
		in 3D mode for infirm, child and pregnant
								additionally used as content protection systems
		woman.
								for BD format, which imposes certain restrictions
	yy If you are experiencing headache, tiredness							including playback restrictions for BD-ROM
		or dizziness while viewing content in 3D, it is						Mark and/or BD+ protected contents. To obtain
		strongly recommended to stop the playback						additional information on AACS, BD-ROM
		and rest until you feel normal.						Mark, BD+, or this product, please contact an
								authorized Customer Service Centre.
								yy Many BD-ROM/DVD discs are encoded with
								copy protection. Because of this, you should only
								connect your player directly to your TV, not to a
								VCR. Connecting to a VCR results in a distorted
								picture from copy-protected discs.

yy Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability.

Important Notice for TV colour system

The colour system of this player differs according to currently playing discs.

For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.

Only the multi system colour TV can receive all signals output from the player.

yy If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC.

yy The multi system colour TV changes the colour system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen.

yy Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder.

Getting Started

5

1 GettingStarted

6 Table of Contents

Table of Contents

1Getting Started

2Safety Information

8 Introduction

8–  Playable discs and symbols used in this manual

9–  About the “7” symbol display

9–  Compatibility notes

10–  File compatibility

11–  Regional Code

11 –  AVCHD (Advanced Video Codec High Definition)

11–  System Requirements

11–  Compatibility Notes

12Remote control

13Main Unit

3 System Setting

26Auto Set UP

27Home Menu Overview

27–  Basic button operations

27Settings

27–  Adjust the Setup Settings

28–  Settings for Digital TV

28 –  Scanning programmes automatically (Auto Tuning)

28–  Scanning programmes manually (Manual Tuning)

29–  Editing Programme List (Channel Edit)

29–  Setting the DTV Lock

30–  Adjusting DTV Rating

30–  Setting the antenna power

30–  Setting the Timeshift

31–  [DTV] Menu

32–  [DISPLAY] Menu

33–  [LANGUAGE] Menu

34–  [AUDIO] Menu

35–  [LOCK] Menu

36–  [NETWORK] Menu

37–  [OTHERS] Menu

2 Connecting

14 Connections to Your TV

14–  Antenna connection to your TV and this unit

15–  HDMI Connection

16–  Component Video Connection

16–  Composite connection

17–  Resolution Setting

17–  About Ferrite Core (for EMI only)

17–  How to attach the ferrite core

18Connecting to an Amplifier

18–  Connecting to an Amplifier via HDMI Output

19–  Connecting to an Amplifier via Digital Audio Output

19–  Connecting to an Amplifier via 2 Channel Audio Output

20Connecting to your Home Network

20–  Wired network connection

21–  Wired Network Setup

22–  Wireless network connection

22–  Wireless Network Setup

25USB device connection

25–  Playback content in the USB device

4 Operating

40Using the Digital TV functions

40–  Viewing the Digital TV

40–  Changing Digital TV programmes

40–  Setting favourite programmes

41–  Viewing the programme information

41–  Selecting DTV audio language

41–  Selecting DTV subtitle language

41–  Programme Guide (Digital program only)

42–  Using the MHEG (Viewing MHEG)

43–  Using the timeshift function manually

43–  Using the timeshift function automatically

44Recording TV programmes

44 –  Normal Recording

44–  Dual Programme Recording

44–  Stop Recording

45–  Timer Recording (Manual)

45–  Timer Recording (EPG)

46–  Canceling a timer recording

46–  Editing a timer recording

46–  Instant Timer Recording

47General Playback

			Table of Contents 7
47	–  Playing Discs	74	Using the LG Apps
48	–  Using the disc menu	74	–  Signing in
48	–  Resume playback	74	–  Managing my Apps
48	–  Playing the recorded titles	75	–  Searching online content

48–  Searching the recorded titles

49–  Sorting the recorded titles

	49	–  Playing content contained in the internal	5		Troubleshooting
		hard disk drive
	50	–  Searching content in the hard disk drive
			76		Troubleshooting
		by entering file name	76		–  General
	50	–  Playing Blu-ray 3D disc	76		–  Picture
	51	Advanced Playback	77		–  Sound
	51	–  Repeat Playback	77		–  Network
	52	–  Repeating a specific portion	78		–  Recording
	52	–  Changing content list view	78		–  Customer Support
	53	–  Viewing content information	78		–  Open source software notice
	53	–  Selecting a subtitle file
	53	–  Last Scene Memory
	54	On-Screen display	6		Appendix
	54	–  Displaying content information on-
		screen
			79		Controlling a TV with the Supplied Remote
	55	–  Playing from selected time
					Control
	55	–  Hearing different audio
			79		–  Setting up the remote to control your TV
	55	–  Selecting a subtitle language
			80		Area Code List
	56	–  Watching from a different angle
			81		Language code List
	56	–  Changing the TV Aspect Ratio
			82		Trademarks and Licenses
	56	–  Changing the Picture Mode
			84		Network Software Update
	57	Copying
			84		–  Network update notification
	57	–  Copying file(s)/folder(s) to the internal
			85		–  Software Update
		hard disk drive
			86		MediaHome 4 Essentials
	58	–  Copying file(s)/folder(s) from the internal
			86		–  System requirements
		hard disk drive to a USB storage device
			86		–  Installing Nero MediaHome 4 Essentials
	60	–  Deleting a file(s)/folder(s)
			87		–  Sharing files and folders
	60	–  Naming a file/folder
			88		Audio Output Specifications
	61	Enjoying BD-LIVE
			89		About the internal hard disk drive
	61	–  Playing a file on a network server
			90		Video Output Resolution
	62	–  Wi-Fi Direct™ Connection
			91		Specifications
	64	Playing movie file and VR discs
			92		Maintenance
	65	–  Selecting a subtitle file
			92		–  Notes on Discs
	65	–  Changing subtitle code page
			92		–  Handling the Unit
	66	Viewing a photo
			93		Important Information Relating to Network
	67	–  Options while viewing a photo
					Services
	67	–  Listening to music during a slide show
	68	Listening to music
	69	–  Audio CD Recording	7		Warranty
	70	–  Viewing information from Gracenote
		Media Database
			94		GUARANTEE
	71	–  Using the Music Library
	73	–  Using the Photo Library
	73	Using the Premium

1

2

3

4

5

6

1 GettingStarted

8 Getting Started

Introduction

Playable discs and symbols used in this manual

Media/Term	Logo			Symbol		Description
						yy Discs such as movies that can be purchased or
				e		rented.
						yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
Blu-ray						yy BD-R/RE discs that are recorded in BDAV format.
			y			yy BD-R/RE discs that contain Video, Audio or
			u			Photo files.
			i			yy ISO 9660+JOLIET, UDF and UDF Bridge format
						yy Discs such as movies that can be purchased or
DVD-ROM				r		rented.
						yy Video mode and finalized only
DVD-R						yy Supports the dual layer disc also
DVD-RW
			o			Finalized AVCHD format
DVD+R
DVD+RW			y			yy DVD±R/RW discs that contain Video, Audio or
(12 cm)			u			Photo files.
						yy ISO 9660+JOLIET, UDF and UDF Bridge format
			i
DVD-RW (VR)				r		VR mode and finalized only
(12 cm)
Audio CD				t		Audio CD
(12 cm)
			y			yy CD-R/RW discs that contain Video, Audio or
CD-R/RW			u			Photo files.
(12 cm)						yy ISO 9660+JOLIET, UDF and UDF Bridge format
			i
			y			Movie, Music, Photo files contained in the HDD
HDD	–		u
			i
						Titles recorded via this unit
				REC
Note	–		,			Indicates special notes and operating features.
Caution	–		>			Indicates cautions for preventing possible damages
						from abuse.

Getting Started	9

,,Note

yy Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

yy Depending on the recording software & the finalization, some of recorded discs (CD-R/ RW or DVD±R/RW) may not be playable.

yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

yy If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

yy This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality.

yy Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback.

yy Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be obtained from / guaranteed by the copyright owner.

yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. If you set the

option to “Live System”, the disc cannot be played on LG player. (Mastered/Live File System : Disc format system for windows Vista)

yy The drive is slot looking you should insert only round 77 or 120 mm disc. The drive does not work with irregularly shaped discs, which could damage the drive if inserted.

About the “7” symbol display

“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.

Compatibility notes

yy Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.

yy This unit allows you to enjoy functions such as picture-in-picture, secondary audio and

Virtual packages, etc., with BD-ROM supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1). Secondary video and audio can be played from a disc compatible with the picture-in- picture function. For the playback method, refer to the instructions in the disc.

yy Viewing high-definition content and upconverting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device.

yy Some BD-ROM and DVD discs may restrict the use of some operation commands or features.

yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maximum 7.1 channels if you use HDMI connection for the audio output of the unit.

yy You can use a USB device to store some disc related information, including downloaded online content. The disc you are using will control how long this information is retained.

1 GettingStarted

1 GettingStarted

10 Getting Started

File compatibility

Overall

Available File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wav” “.wma”, “.ts”

yy There could be a variance on the available file extensions depending on DLNA server.

yy The file name is limited to 180 characters.

yy Depending on the size and number of the files, it may take several minutes to read the contents on the media.

Maximum Files/Folder: Less than 2000 (total number of files and folders)

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

MOVIE

Available resolution: 1920 x 1080 (W x H) pixels

Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), DVD Subtitle System (.txt), TMPlayer (.txt)

Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC, DIVX-HD, MPEG1 SS, MPEG2 PS, MPEG2 TS

Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”, “AC3”

yy Not all the WMA and AAC Audio formats are compatible with this unit.

Sampling frequency: within 32-48 kHz (WMA), within 16-48 kHz (MP3)

Bit rate: within 20-320 kbps (WMA), within 32-320 kbps (MP3)

,,Note

yy HD movie files contained on the CD or USB 1.0/1.1 may not be played properly. BD, DVD or USB 2.0 are recommended to play back HD movie files.

yy This player supports H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher level, there will be an warning message on the screen.

yy This player does not support the file that are recorded with GMC*1 or Qpel*2. Those are video encoding techniques in MPEG4 standard, like DivX or XVID.

*1 GMC – Global Motion Compensation

*2 Qpel ­– Quarter pixel

yy HD movie files that need high performance playback could react slowly.

yy The total playback time indicated on the screen may not be correct for .ts files.

MUSIC

Sampling frequency: between 8 - 48 kHz (WMA), within 11 - 48 kHz (MP3),

44.1 and 48 kHz (LPCM)

Bit rate: between 8 - 320 kbps (WMA, MP3), 768 kbps and 1.536 Mbps (LPCM)

,,Note

yy This unit cannot support the ID3 Tag embedded MP3 file.

yy The total playback time indicated on the screen may not be correct for VBR files.

PHOTO

Recommended size:

Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel

yy Progressive and lossless compression photo image files are not supported.

yy Depending on the size and number of the photo files, it may take several minutes to read the contents of the media.

yy This player can not display thumbnail image in some files.

Getting Started	11

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”.

AVCHD (Advanced Video Codec High Definition)

yy This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders.

yy The AVCHD format is a high definition digital video camera format.

yy The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than the conventional image compressing format.

yy Some AVCHD discs use the “x.v.Color” format.

yy This player can playback AVCHD discs using “x.v.Color” format.

yy Some AVCHD format discs may not be played, depending on the recording condition.

yy AVCHD format discs need to be finalized.

yy “x.v.Color” offers a wider colour range than normal DVD camcorder discs.

Compatibility Notes

yy Because BD-ROM is a new format, the can be issues regarding certain disc, digital connection and other compatibility issues. If you experience compatibility problems, please contact an authorized Customer Service Center.

yy Viewing high-definition content and upconverting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device.

yy Some BD-ROM and DVD discs may restrict the use of some operation commands or features.

yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maximum 7.1 channels if you use HDMI connection as the audio output.

yy You can use a USB device that is used to store some disc related information, including downloaded on-line content. The disc you are using will control how long this information is retained.

yy While watching 3D contents, on-screen displayed may not be displayed properly. To display proper on-screen display, turn off 3D mode on TV.

System Requirements

For high definition video playback:

yy High definition display that has COMPONENT or HDMI input jacks.

yy BD-ROM disc with high definition content.

yy HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors).

yy For up-conversion of standard definition DVD, a HDMI or HDCP capable DVI input on your display device is required for copy-protected content.

For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio playback:

yy An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD) decoder.

yy Main, centre, surround speakers and subwoofer as necessary for chosen format.

1 GettingStarted

1 GettingStarted

12 Getting Started

Remote control

Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with 4and 5matched correctly.

• • • • • • A• • • •

1(POWER): Switches the player ON or OFF.

B(OPEN/CLOSE): Opens and closes the disc tray.

MUTE (@): Mutes the sound.

EXIT: Exits a menu or hides onscreen information.

SUBTITLE: Selects a subtitle language.

TEXT: Switches between teletext mode and normal TV viewing.

0-9 numerical buttons: Selects numbered options in a menu.

CLEAR: Removes a mark on the search menu or a number when setting the password.

REPEAT (h): Repeats a desired section or sequence.

TV/RADIO: Switches between TV and radio modes.

• • • • • • B• • •

•

c/v(SCAN): Searches backward or forward.

C/V(SKIP): Goes to the next or previous chapter / track / file.

Z(STOP): Stops playback. d(PLAY): Starts playback. M(PAUSE): Pauses playback.

TIME SHIFT: Activates pause live TV/playback (timeshift) for a live TV programme.

• • • • • • C• • •

•

VOL (-/+): Adjusts the sound level of the unit.

REC. (X): Starts recording.

CH LIST: Displays the Channel list.

TIMER REC.: Displays [Timer Recording] menu.

CH (W/S): Scans up or down through memorized programmes.

HOME (n): Displays or exits the [Home Menu].

GUIDE: Displays the EPG menu.

MUSIC ID: When connected to the network, can provide information about the current song while video playback.

INFO/MENU (m): Displays or exits On-Screen Display.

Direction buttons: Selects an option in the menu.

ENTER (b): Acknowledges menu selection.

BACK (1): Exits the menu or returns to the previous screen.

TITLE/POP UP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.

DISC MENU/REC.LIST:

Accesses menu on a disc or switches between recording list menu.

• • • • • • D• • •

•

Coloured (R, G, Y, B) buttons:

Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO], [MUSIC], [Premium], [LG Apps] and [DTV] menu.

TV Control Buttons: See page 79

Getting Started 13

Main Unit

1 GettingStarted

ADisc Slot

BDisplay window

CRemote Sensor

DB(Open/Close)

ET(Play/Pause)

AANTENNA IN

BUSB Port

If you want to record on external HDD, connect external HDD to unit.

CLAN port

DHDMI OUT (1080p)

EVIDEO OUT

F2CH AUDIO OUT (Left/Right)

FI(Stop)

G1(Power)

HUSB Port

GDIGITAL AUDIO OUT (OPTICAL)

HAC IN connector

Connect the supplied power cord.

IANTENNA OUT (TO TV)

JCOMPONENT VIDEO OUT (Y PB PR)

2

Connecting

14 Connecting

Connections to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

yy Antenna connection (page 14) yy HDMI connection (page 15)

yy Component Video connection (page 16)

yy Composite connection (page 16)

,,Note

yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use only one of the connections described in this manual.

yy Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.

yy Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel.

yy Do not connect the player’s AUDIO OUT jack to the phono in jack (record player) of your audio system.

yy Do not connect your player via your VCR. The image could be distorted by the copy protection system.

Antenna connection to your TV and this unit

Connect one end of the RF cable to ANTENNA OUT(TO TV) jack on the unit and other end to ANTENNA IN jack on your TV. Passes the signal from the ANTENNA IN jack to your TV/monitor.

Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit. If you want to use an indoor antenna, use one with a signal amplifier rated at 5V, 100mA and set [Antenna 5V] to [ON] in the setup menu (See page 30).

RearRearofofthisthisunit

ANTENNA

RF Cable

TVTV

Connecting 15

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the unit to the HDMI jack on a HDMI compatible TV or monitor.

Rear of this unit

HDMI Cable

TVTV

,,Note

yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.

yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.)

yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 33).

yy Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.

yy When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the the HDMI connection, or disconnect the HDMI cable.

yy If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5m).

Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Additional Information for HDMI

yy When you connect a HDMI or DVI compatible device make sure of the following:

-- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-- The connected device’s video input is set correctly for this unit.

-- The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.

yy Not all HDCP-compatible HDMI or DVI devices will work with this player.

-- The picture will not be displayed properly with non-HDCP device.

-- This player does not playback and TV screen is changed to black screen.

2

Connecting

16 Connecting

Component Video Connection

Connect the COMPONENT VIDEO OUT jacks on the unit to the corresponding input jacks on the TV using Y PB PR cables. Connect the left and right AUDIO OUT jacks of the unit to the audio left and right IN jacks on the TV using the audio cables.

Composite connection

Connect the VIDEO OUT jack on the Recorder to the video in jack on the TV using the video cable supplied. Connect the Left and Right AUDIO OUT jacks on the Recorder to the audio left/right in jacks on the TV using the supplied audio cables.

2	Rear of this unit		Rear of this unit
Connecting		Video
			Audio Cable
		Cable
			TV

Audio Cable

Component video Cable

TVTV

,,Note

When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 17.)

Connecting 17

Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.

1.Press HOME (n).

2.Use A/Dto select the [Setup] and press ENTER (b). The [Setup] menu appears.

3.Use W/Sto select [DISPLAY] option then press Dto move to the second level.

About Ferrite Core (for EMI only)

Be sure to attach the ferrite core to the power cord. This ferrite core can reduce noise.

How to attach the ferrite core

1.Press the stopper [a] of the ferrite core to open.

2.Wind the power cord on the unit once on the ferrite core.

3.Close the ferrite core until it clicks. Refer to the fig.3.

4. Use A/Dto select the [Resolution] option

(fig.3)

then press ENTER (b) to move to the third level.

5.Use W/Sto select the desired resolution then press ENTER (b) to confirm your selection.

2

Connecting

2

Connecting

18 Connecting

Connecting to an

Amplifier

Make one of the following connections, depending on the capabilities of your existing equipment.

yy HDMI Audio connection (page 18) yy Digital Audio connection (page 19)

yy 2CH Analogue Audio connection (page 19)

Since many factors affect the type of audio output, see “Audio Output Specifications” for details (pages 88-89).

Connecting to an Amplifier via HDMI Output

Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 3435.)

Rear of this unit

About Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one or more of the audio formats supported by your unit. Check the receiver manual and the logos on the front of the receiver. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)

HDMI Cable

Amplifier/Receiver

Ampli er/Receiver

HDMI

Cable

TVTV

Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable if your amplifier has HDMI output jack.

Connecting 19

Connecting to an Amplifier via Digital Audio Output

Connect the player’s DIGITAL AUDIO OUT (OPTICAL) jack to the corresponding in jack (OPTICAL) on your amplifier.

Use an optional digital (optical) audio cable. You will need to activate the unit’s digital output. (See “[AUDIO] Menu” on pages 34-35.)

Rear of this unit

Connecting to an Amplifier via 2 Channel Audio Output

Connect the Left and Right 2CH AUDIO OUT jacks on the unit to the audio left and right in jacks on your amplifier, receiver, or stereo system, using audio cables.

Rear of this unit

Audio Cable

Optical Cable

Amplifi er/Receiver

Amplifier/Receiverr

2

Connecting

2

Connecting

20 Connecting

Connecting to your
Home Network	Broadband
	service
This unit can be connected to a local area network
(LAN) via the LAN port on the rear panel or the
internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and	Router
streaming services.

Wired network connection

Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.

Please refer to the documentation for your network device for further instructions.

Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.

,,Note

yy When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

yy Do not connect a modular phone cable to the LAN port.

yy Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.

yy If you want to access content from PCs or DLNA servers, this unit must be connected to the same local area network with them via a router.

PC and/or DLNA certified server

Rear of this unit

Connecting 21

Wired Network Setup

If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.

Preparation

Before setting the wired network, you need to connect the broadband internet to your home network.

1.Select [Connection Setting] option in the [Setup] menu then press ENTER (b).

2.The [Connection Setting] menu will appear on the screen. Use W/Sto select the [Wired] and press ENTER (b).

3.Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.

4.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP address automatically.

,,Note

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.

5.Select [OK] and press ENTER (b) to apply network settings.

6.The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection.

7.If you select [Test] and press ENTER

(b) at step 5 above, the network connection status is displayed on the screen.

You can also test it on the [Connection Status] in the [Setup] menu.

2

Connecting

2

Connecting

22 Connecting

Wireless network connection

Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment.

Wireless Network Setup

For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follows. Setting up the access point or the wireless router is required before connecting the player to the network.

Wireless

Communication

DLNA certified servers

Access Point or

Wireless Router

Broadband service

Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.

For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option.

If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home.

Preparation

Before setting the wireless network, you need to:

yy connect­ the broadband internet to the wireless home network.

yy set­ the access point or wireless router.

yy ­note the SSID and security code of the network.

1.Select [Connection Setting] option in the [Setup] menu then press ENTER (b).

2.The [Connection Setting] menu appears on the screen. Use W/Sto select [Wireless] and press ENTER (b).

3.Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.

				Connecting 23
4. The player scans all available access points or			,,Note
	wireless routers within range and displays them		If there is no DHCP server on the network and
	as a list. Use W/Sto select an access point or		you want to set the IP address manually, select
	wireless router on the list, and then press ENTER		[Static] then set [IP Address], [Subnet Mask],
	(b).		[Gateway] and [DNS Server] using W/S/
			A/Dand numerical buttons. If you make a
			mistake while entering a number, press CLEAR
			to clear the highlighted part.
			6. Select [OK] and press ENTER (b) to apply
			network settings.
			7. The player will ask you to test the network
			connection. Select [OK] and press ENTER
If you have security on your access point or			(b) to complete the network connection.
wireless router, verify that the WEP or WPA key			8. If you select [Test] and press ENTER (b)
that was entered into the player matches the			at step 7 above, the network connection status
router’s information exactly. You need to input the			is displayed on the screen.
security code as necessary.			You can also test it on the [Connection Status]
	,,Note		in the [Setup] menu.
		mode generally have 4 keys
yy WEP security
	available on an access point or wireless
	router’s setting. If your access point or
	wireless router uses WEP security, enter the
	security code of the key “No.1” to connect
	on your home network.
yy An Access Point is a device that allows you
	to connect to your home network wirelessly.
[Manual] – Your access point may not be
broadcasting its access point name (SSID). Check
your router settings through your computer
and either set your router to broadcast SSID, or
manually enter the access point name (SSID) in
[Manual].
[Push Button] – If your access point or wireless
router supports the Push Button Configuration
method, select this option and press the Push
Button on your access point or wireless router
within 120 counts. You do not need to know the
access point name (SSID) and security code of
your access point or wireless router.
5. Use W/S/A/Dto select the IP mode
	between [Dynamic] and [Static].
	Normally, select [Dynamic] to allocate an IP
	address automatically.

2

Connecting

2

Connecting

24 Connecting

	Notes on Network Connection:	yy A DSL modem is required to use DSL service and
	yy Many network connection problems during	a cable modem is required to use cable modem
		service. Depending on the access method of and
	set up can often be fixed by re-setting the
		subscriber agreement with your ISP, you may not
	router or modem. After connecting the player
		be able to use the internet connection feature
	to the home network, quickly power off and/
		contained in this player or you may be limited
	or disconnect the power cable of the home
		to the number of devices you can connect at
	network router or cable modem. Then power on
		the same time. (If your ISP limits subscription to
	and/or connect the power cable again.
		one device, this player may not be allowed to
	yy Depending on the internet service provider (ISP),
		connect when a PC is already connected.)
	the number of devices that can receive internet	yy The use of a “Router” may not be allowed or its
	service may be limited by the applicable terms
		usage may be limited depending on the policies
	of service. For details, contact your ISP.
		and restrictions of your ISP. For details, contact
	yy Our company is not responsible for any
		your ISP directly.
	malfunction of the player and/or the internet	yy The wireless network operate at 2.4GHz
	connection feature due to communication
		radio frequencies that are also used by other
	errors/malfunctions associated with your
		household devices such as cordless telephone,
	broadband internet connection, or other
		Bluetooth® devices, microwave oven, and can be
	connected equipment.
		affected by interference from them.
	yy The features of BD-ROM discs made available
		yy Turn off all unused network equipment in
	through the Internet Connection feature are not
		your local home network. Some devices may
	created or provided by our company, and our
		generate network traffic.
	company is not responsible for their functionality
		yy For the purpose of the better reception place the
	or continued availability. Some disc related
	material available by the Internet Connection	player as close as possible to the access point.
	may not be compatible with this player. If you	yy In some instances, placing the access point or
	have questions about such content, please	wireless router at least 0.45 m above the floor
	contact the producer of the disc.	may improve the reception.
	yy Some internet content may require a higher	yy Move closer to the access point if possible or re-
	bandwidth connection.	orient the player so there is nothing between it
	yy Even if the player is properly connect and	and the access point.
	configured, some internet content may not	yy The reception quality over wireless depends on
	operate properly because of internet congestion,	many factors such as type of the access point,
	the quality or bandwidth of your internet service,	distance between the player and access point,
	or problems at the provider of the content.	and the location of the player.
	yy Some internet connection operations may not	yy Set your access point or wireless router to
	be possible due to certain restrictions set by the	Infrastructure mode. Ad-hoc mode is not
	Internet service provider (ISP) supplying your	supported.
	broadband Internet connection.
	yy Any fees charged by an ISP including, without
	limitation, connection charges are your
	responsibility.
	yy A 10 Base-T or 100 Base-TX LAN port is required
	for wired connection to this player. If your
	internet service does not allow for such a
	connection, you will not be able to connect the
	player.
	yy You must use a Router to use xDSL service.

Connecting 25

USB device connection

This unit can play movie, music and photo files contained on a USB device.

Playback content in the USB device

1.Insert a USB device into the USB port until it fits into place.

Front of the unit

Rear of this unit

or

External HDD

2.Press HOME (n).

3.Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).

4.Select the [USB] option using W/S, and press ENTER (b).

5.Select a file using W/S/A/D, and press d (PLAY) or ENTER (b) to play the file.

6.Withdraw the USB device carefully after exiting the USB mode.

,,Note

yy This unit supports USB flash memory/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live, only FAT16 and FAT32 formats are supported. The USB device can be used for local storage for enjoying BD-Live discs from the Internet.

yy Please use the Internal HDD or USB flash memory/external HDD formatted in either FAT16 or FAT32 when using BD-Live.

yy This unit can support up to 4 partitions of the USB device.

yy Do not extract the USB device during operation (play, recording, etc.).

yy A USB device which requires additional programme installation when you have connected it to a computer, is not supported.

yy USB device: USB device that supports USB1.1 and USB2.0.

yy Movie, Music and photo files can be played. For details of operations on each file, refer to relevant pages.

yy Regular back up is recommended to prevent data loss.

yy If you use a USB extension cable or USB HUB or USB multi card reader, the USB device may not be recognized.

yy Some USB device may not work with this unit.

yy Digital camera and mobile phone are not supported.

yy The USB Port on this unit cannot be connected to a PC. The unit cannot be used as a storage device.

yy Unformatted media cannot be used. Please format before using.

yy If USB HDD cannot be recognized, try another different USB cable.

yy Some USB cables may not supply enough current for normal USB operation.

yy Files over 4GB are supported with NTFS format.

yy In case of recording to external HDD, connect to USB port on rear panel. Only external HDD that supports NTFS can be available.

2

Connecting

3

Setting System

26 System Setting

Auto Set UP

You can reset the recorder to all its factory settings. Some options cannot be reset (Rating and Password). The [Auto Setup] menu appears on the screen after the factory settings.

Step 1. Language Setting

1.Use W/S/A/Dto select a language for the on-screen display, and press ENTER (b).

Step 2. Channel Setting

1.Input the new password using numerical buttons. Enter it again to verify.

2.While the Start option is selected, and press ENTER (b) to begin the channel search.

If you want to search channels in numerical order, uncheck the box [Automatic Numbering] by using ENTER (b)

.

The recorder automatically searches for and saves the programmes.

If you select [Stop], the [Channel Setting] function will be skipped.

3. Press ENTER (b).

Step 3. Time Setting

1.Use A/Dto select an option among [Manual] or [Auto], and press ENTER (b).

Auto: Set the programme that broadcasts a clock signal and the clock will be set automatically.

If the time that has automatically set is not correct comparing your local time, you can set additional time option.

Manual: If there is no channel that broadcasts a clock signal in your area, you can set the time and date manyally. Use W/Sto select each field, and input correct time and date using A/ D. You can use numerical buttons.

2.Press ENTER (b) to complete the time setting.

Step 4. Network Setting

1.Refer to “Wired network connection” on pages 20-21 to complete the [Wired] setup option, and press ENTER (b).

Select [No] and press ENTER (b) to cancel.

2.Refer to “Wireless network connection” on pages 22-24 to complete the [Wireless] option, and press ENTER (b).

Select [Cancel] and press ENTER (b) to cancel. This recorder can apply only one network setup between [Wired] and [Wireless]. If you already set the [Wired] at step 6, you do not need to set [Wireless] setting.

System Setting 27

Home Menu Overview

To access numerous functions of the unit, press HOME on the remote.

Basic button operations

HOME: Accesses or removes the Home Menu. W/S/A/D: Used to navigate on-screen displays. ENTER (b): Acknowledges menu selection.

BACK (1): Exits the menu.

Settings

Adjust the Setup Settings

You can change the settings of the player in the [Setup] menu.

1. Press HOME (n).

2.Use A/Dto select [Setup] and press ENTER (b). The [Setup] menu appears.

Favorite Apps

[DTV] - You can watch digital broadcasts. (pages 40-46)

[Movie] - Plays video contents.

[Photo] - Plays photo contents.

[Music] - Plays audio contents.

[Premium] - Displays the Premium Home screen.

[LG Apps] - Displays the [LG Apps] screen.

[Setup] - Adjusts the system settings.

[Search] - Searches an online content by inputting a keyword on the search menu.

[Recordings] - Displays [Recordings] menu.

[Favorite Apps] - Shortcut for user’s favorite Apps.

[My Apps] - Displays the [My Apps] screen.

3.Use W/Sto select the first setup option, and press Dto move to the second level.

4.Use W/Sto select a second setup option, and press ENTER (b) or Dto move to the third level.

5.Use W/Sto select a desired setting, and press ENTER (b) or Dto confirm your selection.

3

Setting System

28 System Setting

Settings for Digital TV

To use DTV functions, this recorder needs some settings in advance.

Scanning programmes automatically (Auto Tuning)

All available digital TV or radio programmes are searched for and stored automatically based on the selected country.

		1.	Press HOME (n).
		2.	Use A/Dto select [Setup], and press ENTER
			(b).
	3	3.	Use W/Sto select [DTV], and press ENTER
	System		(b).
		4.	Use W/Sto select [Auto Tuning] and press
			ENTER (b).
	Setting		If you do not want to search the channel in
			order of number. Please uncheck [Automatic
			Numbering] by using ENTER (b).
		5.	Use Sto select [Start], and press ENTER (b) to
			begin the channel search.

Select [Stop] and press ENTER (b) to stop the scanning programmes.

,,Note

If the [DTV Lock] option is set to [Lock], this function is available when you enter the password correctly. (see page 29.)

Scanning programmes manually (Manual Tuning)

Scans digital TV or radio programmes and adds the detected programmes to the programme list.

1.Display [Setup] menu.

2.Use W/Sto select [DTV], and press ENTER (b).

3.Use W/Sto select [Manual Tuning] and press ENTER (b) to display the [Manual Tuning] menu.

4.Use W/S/A/Dto select the desired multiplexer (MUX), and the unit starts scanning automatically.

5.Use Sto select the [Add] and press ENTER (b) to add the programme the unit scans automatically.

,,Note

If the [DTV Lock] option is set to [Lock], this function is available when you enter the password correctly. (see page 29.)

System Setting 29

Editing Programme List (Channel Edit)

You can remove any digital TV or radio programs stored on this recorder using the [Channel Edit] menu.

1.Display [Setup] menu.

2.Use W/Sto select [DTV], and press ENTER (b).

3.Use W/S/A/Dto select [Channel Edit] and press ENTER (b).

4.Press Wto select [DTV] and use A/Dto select [DTV] or [Radio] programme list.

5.Use W/S/A/Dto select a programme you want to skip from the list, and press red (R) coloured button.

If you do not want to skip the programme, select the programme and press red (R) coloured button again.

Use W/S/A/Dto select a programme you want to lock from the list, and press blue (B) coloured button.

If you do not want to lock the programme, select the programme and press blue (B) coloured button again.

6.Press BACK (1) to return to the previous step.

Skip : If the programme is assigned to skip, you can’t select that programme with PR button in Remote control.

Edit (It appears when unchecking the box Automatic Numbering): Choose a channel you want. Press green (G) coloured button and then change the location of channel by using W/ S/A/D.

Block/unblock : If the programme is assigned to block and [DTV Lock] in the [Setup] menu is set to [Lock], you should enter the password to watch the programme.

Setting the DTV Lock

Allows you to activate or deactivate all of the lock schemes previously set. When the [DTV Lock] is set to [Unlock].

1.Display [Setup] menu.

2.Use W/S/A/Dto select [LOCK] and press ENTER (b).

3.Use W/Sto select [DTV Lock] and press ENTER (b).

4.Input the password using numerical buttons. If you have not set your password yet, input “1111” and press ENTER (b).

5.Use W/Sto select [Lock] and press ENTER (b) to activate the DTV Lock.

3

Setting System