LG Electronics 22MA33V, 22MA33D, 24MN33D, 24MN33V, 26MA33D User Manual

ENGLISH

OWNER’S MANUAL

LED TV

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating the your TV and
retain it for future reference.

22MA33D 22MA33V

24MN33D 24MN33V

26MA33D 26MA33V

29MN33D 29MN33V

www.lg.com

TABLE OF CONTENTS

2

ENGLISH

TABLE OF CONTENTS

3 LICENSES

4 INSTALLATION PROCEDURE

5 ASSEMBLING AND PREPARING

5 Unpacking
9 Parts and buttons
11 Lifting and moving the TV
12 Setting up the TV
12 - Attaching the Stand
16 - Mounting on a table
17 - Tidying cables
18 - Detaching the Stand
20 - Mounting on a wall

22 WATCHING TV

22 Turning the TV on for the first time

39 CUSTOMIZING SETTINGS

39 Accessing main menus

40 USING THE USER GUIDE

40 Accessing User Guide menu.
40 - Using the TV menu
40 - Using the Remote Control

41 MAINTENANCE

41 Cleaning Your TV
41 Screen and frame
41 Cabinet and stand
41 Power cord
42 Preventing “Image burn” or “Burn-in” on

your TV screen

43 TROUBLESHOOTING

43 General

24 MAKING CONNECTIONS

24 Connecting an antenna
25 Satellite connection
26 Connecting to a HD receiver, DVD, VCR

player or Gaming device
26 - HDMI connection
27 - HDMI to DVI connection
28 - Component connection
29 - Composite connection
30 - Euro Scart connection
31 Connecting to a USB
31 Connecting to a CI Module
32 Connecting to a wired network
33 Connecting to a PC
34 - HDMI connection
35 - HDMI to DVI connection
36 - RGB connection

37 REMOTE CONTROL

44 SPECIFICATIONS

LICENSES

3

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.

ENGLISH

DivX Certified® to play DivX® video up to HD 1080p, including premium
content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274

INSTALLATION PROCEDURE

4

ENGLISH

INSTALLATION PROCEDURE

1

2

3

Open the package and make sure all the accessories are included.

Attach the stand to the TV.

Connect an external device to the TV.

NOTE

Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.



The available menus and options may differ from the input source or product model that you are



using.
New features may be added to this TV in the future.



ASSEMBLING AND PREPARING

5

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and accessories.

NOTE

The accessories supplied with your product may vary depending on the model.



Product specifications or contents in this manual may be changed without prior notice due to



upgrade of product functions.

CAUTION

Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.



NOTE

The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to



upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick



and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.

ENGLISH

B

A

B

*A 10 mm
*B

A

18 mm

6

ENGLISH

ASSEMBLING AND PREPARING

24MN33D 22MA33V 24MN33V22MA33D

Remote control.
Batteries (AAA).

(See p.37, See p.38)

Stand Body.

(See p.12, See p. 18)

CD (Owner's Manual).
Cards.

Cable Tie.

(See p.17)

Stand Base.

(See p.12, See p. 18)

or

Power Cord.

( Depending on the country )

(See p.16)

or

Isolator

(Depending on the country)

AC-DC Adapter.

(See p.16)

AC-DC Adapter.

( Depending on the country )

(See p.16)

26MA33D 29MN33D 26MA33V 29MN33V

ASSEMBLING AND PREPARING

7

ENGLISH

Remote control.
Batteries (AAA).

(See p.37, See p.38)

Stand Body.

(See p. 14, See p. 19)

CD (Owner's Manual).
Cards.

Screws for Assembly
2 EA

(See p. 14, See p. 19)

Stand Base.

(See p. 14, See p. 19)

Cable Tie.

(See p.17)

or

Power Cord.

( Depending on the country )

(See p.16)

or

Isolator

(Depending on the country)

AC-DC Adapter.

(See p.16)

AC-DC Adapter.

( Depending on the country )

(See p.16)

ASSEMBLING AND PREPARING

8

ENGLISH

NOTE

Antenna Isolator Installation Guide

-Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact

might be heated and excessive heat might cause an accident.

-You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

-Before starting, be sure that the TV antenna is connected.

Wall

ANTENNA/

CABLE IN

Cable / Antenna

or

Isolator

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to
a cable distribution system has therefore to be provided through a device providing electrical isolation
below a certain frequency range (galvanic isolator, see EN 60728-11)”

1. Connect to TV.

2. Connect to Set-Top box.

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

Parts and buttons

ASSEMBLING AND PREPARING

Remote Control Sensor

Standby Light

Lighting On :



When Power is turned off

Lighting Off :



When Power is turned on

9

ENGLISH

Touch Buttons

Touch button Description

Scrolls through the saved programmes.

Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input.

SETTINGS Accesses the main menus, or saves your input and exits the menus.

INPUT Changes the input source.

/ I

Turns the power on or off.

NOTE

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

10

ENGLISH

ASSEMBLING AND PREPARING

26MA33D 29MN33D24MN33D22MA33D

22MA33V 24MN33V 26MA33V 29MN33V

Only UK

or

(Depending on the
model)

Connection panel (See p.24)

Lifting and moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.

CAUTION

Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.

It is recommended to move the TV in the



box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect



the power cord and all cables.
Hold the top and bottom of the TV frame



firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

When holding the TV, the screen should face



away from you to prevent the screen from
scratches.

When transporting the TV, do not expose the



TV to jolts or excessive vibration.
When transporting the TV, keep the TV



upright, never turn the TV on its side, or tilt
towards the left or right.

11

ENGLISH

12

Setting up the TV

ENGLISH

Attaching the Stand

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.

1

ASSEMBLING AND PREPARING

24MN33D22MA33D 22MA33V 24MN33V

Place the TV with the screen side down on a

flat and cushioned surface.

Attach the Stand Base from the Stand Body by

3

turning the screw to the right with a Coin.

CAUTION

Lay a foam mat or soft protective cloth



on the surface to protect the screen from
damage.
When attaching the stand to the TV,



place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

Attach the Stand Body from the TV.

2

CAUTION

Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.

ASSEMBLING AND PREPARING

13

CAUTION

Do not carry the monitor upside-down



as this may cause it to fall off its stand,
resulting in damage or injury.
The illustration shows a general example



of installation and may look different from
the actual product.

ENGLISH

Do not carry the monitor upside-down by



holding the stand body as this may cause
it to fall off, resulting in damage or injury.
The illustration shows a general example



of installation and may look different from
the actual product.

14

26MA33D 29MN33D 26MA33V 29MN33V

ENGLISH

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.

1

ASSEMBLING AND PREPARING

Place the TV with the screen side down on a

flat and cushioned surface.

Secure the TV and the Stand Body with the

3

2 screws.

WARNING

If you don`t fasten the screw tightly, TV will
fall down and get damaged.

Attach the Stand Body from the TV.

2

Insert the two Lockers of the Stand Body right
into the groove of the TV head and secure
them by pressing the left and right bottom
sides.

Locker

Attach the Stand Base from the Stand Body by

4

turning the screw to the right with a Coin.

CAUTION

Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.

ASSEMBLING AND PREPARING

15

CAUTION

Do not carry the monitor upside-down



as this may cause it to fall off its stand,
resulting in damage or injury.
The illustration shows a general example



of installation and may look different from
the actual product.

ENGLISH

Do not carry the monitor upside-down by



holding the stand body as this may cause
it to fall off, resulting in damage or injury.
The illustration shows a general example



of installation and may look different from
the actual product.

16

Mounting on a table

ENGLISH

1

ASSEMBLING AND PREPARING

Lift and tilt the TV into its upright position on a

table.

Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.

10 cm

10 cm

Connect the AC-DC Adapter and Power Cord

2

to a wall outlet.

10 cm

10 cm

WARNING

When you adjust the angle, do not hold the
buttom of the TV frame as shown on the
following illustration, as may injure your fingers.

or

CAUTION

Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may

occur.

CAUTION

Do not place the TV near or on sources of
heat, as this may result in fire or other damage.