LG 22CS410, 22LS3300, 32CS410, 26LS3300, 26CS410 Owner’s Manual
...
|
User’s’s Guidei Specificationifi ti |
|
|
|
||||
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MG KANG |
HJ Shin |
JO Kim |
|
|
|
|
|
|
|||
1. Model Description |
|
|
|
|||||
|
|
|
12.03.09 |
12.03.09 |
12.03.09 |
|||
|
|
|
|
|
|
|
|
|
|
MODEL |
26CS410-TB |
BRAND |
LG |
Part No. |
MFL67452102 |
||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
SUFFIX |
For Asia |
Product Name |
26CS41** |
|
(1203-REV00) |
||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
2. Printing Specification
1.Trim Size (Format) : 170mm x 240mm (tolerance + or - 5 mm)
2.Printing Colors
•Cover : 1 COLOR (BLACK)
•Inside : 1 COLOR (BLACK)
3. Stock (Paper) Maplitho grade below tolerance for GSM is 5 g/m2.
•Cover : Uncoated paper , 80 g/
•Inside : Uncoated paper , 80 g/
4.Printing Method : Off-set
5.Bindery : Saddle stitch
6.Language : English (1)
7.Number of pages : 60 pages
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
NDetails should be followed Eco-SCM management standard[LG(56)-A-2524].
OEspecially, Part should be followed and controlled the following specification.
T(1)Eco-hazardous substances test report should be submitted
Ewhen Part certification test and First Mass Production.
S(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. |
Special Instructions |
|
|
|
|
|
(1) Origin Notification |
|
|
* LGEIN : Printed in Indonesia |
* LGEWA : Printed in U.K. |
|
* LGESP : Printed in Brazil |
* LGEMX : Printed in Mexico |
|
* LGEND : Printed in China |
* LGEIL : Printed in India |
|
* LGEMA : Printed in Poland |
|
|
|
|
4. |
Changes |
|
10 |
|
9 |
|
8 |
|
7 |
|
6 |
|
5 |
|
4 |
|
3 |
|
2 |
|
1 |
|
REVNO.. MM/DD/YY SIGNATURE CHANGE NO. |
CHANGE CONTENTS |
Paginationi ti sheett
P/NO. MFL67452102
Total pages : 52 pages
Front |
|
|
|
|
|
|
|
|
|
|
Back |
Cover |
|
|
|
|
|
|
|
|
|
|
Cover |
(EN) |
|
|
|
|
|
|
|
|
|
|
|
P/NO. |
|
2 |
… |
|
… |
… |
|
50 |
Blank |
|
|
|
|
|
|
|
|
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
CS41**
LS31**
LS33**
P/NO : MFL67452102 (1203-REV00)
www.lg.com
,62/$725 *8,'( 1
127(
Isolator Usage (Safety Caution)
$QWHQQ ,VRO WRU ,QVW OO WLRQ *XLGH
1. Always use isolator with RF signal port (In wall RF port or in set RF Port).
2.Isolator will protect if there is any voltage difference between GND of power Board and GND of Antenna Signal, the Antenna contact might be heated and excessive heat might cause an accident, therefore Isolator installation is highly recommended.
3.Avoid disconnecting the antenna isolator after installation.
4.When applying RF isolator, a slight loss of signal sensitivity can occur.
5.You can improve safety of TV by efficiently removing power voltage from TV
antenna.
$QWHQQ ,VRO WRU ,QVW OO WLRQ 0HWKRG
,VRO WRU &RQQHFWLRQ 0HWKRG |
|
: OO |
&RQQHFW WR 79 |
|
|
ANTENNA/ |
RU |
CABLE IN |
|
& OH $QWHQQ
,VRO WRU
&RQQHFW WR 6HW 7RS R[ &RQQHFW RQH HQG RI WKH LVRO WRU WR F OH QWHQQ M FN QG WKH RWKHU WR 79 VHW RU VHW WRS R[
*Above Pictures may differ from the actual.
127(
"Equipment connected to the protective earthing of mains connection of the building, or through other protective earthing to a cable distribution system using coaxial cable, may create fire hazard in some
circumstances. Connection to a cable distribution system has therefore to be provided through a device
providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)"
<![endif]>(1*/,6+ENG
<![endif]>ENGLISH
2TABLE OF CONTENTS
TABLE OF CONTENTS
1ISOLATOR GUIdE
2TABLE OF CONTENTS
3LICENSES
3OPEN SOURCE SOFTWARE NOTICE 4 SAFETy INSTRUCTIONS
10 INSTALLATION PROCEdURE
10 ASSEMBLING ANd PREPARING
10 Unpacking
14Parts and buttons
15Lifting and moving the TV
16Setting up the TV
18 Mounting on a table
20Mounting on a wall
21Tidying cables
22Not using the Desk-Type Stand
23MAKING CONNECTIONS
23Antenna connection
24Adapter connection
24HDMI connection
25Component connection
25Composite connection
26USB connection
26 Audio System connection
26- External Stereo Connection
27REMOTE CONTROL
28WATCHING TV
28Turning the TV on for the first time
28Watching TV
28Managing programmes
28- Automatically setting up programme
29- Manually setting up programme
30- Editing your programme list
30- Selecting a programme on the programme list
30- Using favourite programmes
31Using additional options
31- Adjusting aspect ratio
32- Using the input list
33ENTERTAINMENT
33Connecting USB storage devices
34Browsing files
35Viewing photos
36Listening to music
38 CUSTOMIZING TV SETTING
38Accessing main menus
38Customizing Settings
38- SETUP Settings
39- PICTURE Settings
41- AUDIO Settings
43- TIME Settings
43- OPTION Settings
44 TELETEXT
44 Switch On/Off
44 Simple Text
44 - Page selection
44 - Programming a colour button in LIST mode
44 Fastext
44- Page selection
45Special Teletext Function
46MAINTENANCE
46 Cleaning your TV
46 - Screen, frame, cabinet and stand
46 - Power cord
46 TROUBLESHOOTING
48 SPECIFICATIONS
51 ENVIRONMENTAL INFORMATION
WARNING
yIf you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yIf you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yThe note helps you to understand and use the product safely. Please read the note carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3
Licenses
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
4SAFETY INSTRUCTIONS
SAFETy INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and remote control in the following environments: -yA location exposed to direct sunlight
-yAn area with high humidity such as a bathroom
-yNear any heat source such as stoves and other devices that produce heat -yNear kitchen counters or humidifiers where they can easily be exposed to steam
or oil
-yAn area exposed to rain or wind -yNear containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yyDo not place the product where it might be exposed to dust. This may cause a fire hazard.
yyMains plug is the disconnecting device. The plug must remain readily operable.
yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yyMake sure to connect the power cable to the grounded current. (Except for devices which are not grounded.)
You may be electrocuted or injured.
yyFix the power cable completely.
If the power cable is not fixed completely, a fire can break out.
yyEnsure the power cord does not come into contact with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
yyDo not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.
yyBend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
yyWhen mounting a TV on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV.
It may cause fire, electric shock.
Desiccant
SAFETY INSTRUCTIONS 5
yyDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.
yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
yyKeep the packing anti-moisture material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yyDo not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yyDispose of used batteries carefully to protect a child from eating them. In case that if they eats it, take them to consult a doctor immediately.
yyDo not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted. (Depending on model)
yyDo not put or store inflammable substances near the product.
There is a danger of explosion or fire due to careless handling of the inflammable substances.
yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
yyDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
yyDo not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something.
You may be injured or the product can be damaged.
yyNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
<![endif]>ENGLISH
<![endif]>ENGLISH
6SAFETY INSTRUCTIONS
yyDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
yyIf any of the following occur, unplug the product immediately and contact your local service centre.
--The product has been impacted by shock --The product has been damaged --Foreign objects have entered the product
--The product produced smoke or a strange smell This may result in fire or electric shock.
yyIf you don’t intend to use the product for a long time, unplug the power cable from the product.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS 7
CAUTION
yyInstall the product where no radio wave occurs.
yyThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
yyDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
yyIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
yyOnly use the attachments / accessories specified by the manufacturer.
yyWhen installing the antenna, consult a qualified service man. This may create a fire hazard or an electric shock hazard.
5~7 time |
s |
|
yyWe recommend that you maintain a distance of at least 5 to 7 times the diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
yyOnly use the specified type of battery.
This could cause damage to the remote control.
yyDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yyMake sure there are no objects between the remote control and its sensor.
yySignal from the remote control may be disturbed by sun light or other strong light. In this case, darken the room.
yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
8SAFETY INSTRUCTIONS
yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
yyPlease follow the installation instructions below to prevent the product from overheating.
--The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
yyPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.
yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
yyAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
yyWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
yyWhen unplugging the cable, grab the plug and unplug it.
If the wires inside the power cable are disconnected, this may cause fire.
yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
SAFETY INSTRUCTIONS 9
yyWhen moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
yyContact the service center once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.
yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you are using.
Your TV's feature may vary from country to counrty depending on channel broadcast system.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEdURE
1 Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
ASSEMBLING ANd PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
|
B |
|
B |
|
|
|
< |
10 mm |
|
|
|
|
||
|
|
|
*A = |
|
|
|
|
< |
18 mm |
A |
|
A |
*B = |
|
|
|
|
ASSEMBLING AND PREPARING 11
Remote control and |
|
batteries (AAA) |
Owner’s manual |
( See p. 27) |
|
Polishing cloth |
Screw for assembly |
2EA, P4 x 20 |
|
(Depending on model) |
(Only 22CS41**, |
Use this to remove dust |
19/22LS33**) |
from the cabinet. |
( See p. 16, 18) |
Screw for assembly |
|
8EA, M4 x 20 |
Screw for assembly |
(Only 26/32/42CS41**, |
2EA, M4 x 14 |
32/42LS31**) |
(Only 26LS33**) |
( See p. 17) |
( See p. 16) |
Screw for assembly |
Screw for fixing |
4EA, M4 x 14 |
|
4EA, P4 x 16 |
(Only 26/32/42CS41**, |
(Only 32LS33**) |
32/42LS31**, 32LS33**) |
( See p. 16) |
( See p. 19) |
|
Adapter |
Power Cord |
(Only 19/22/26LS33**) |
( See p. 24) |
or |
Isolator |
Ferrite core |
|
(Depending on model) |
(Depending on model) |
|
( See p. 13) |
( See p. 13) |
|
Cable holder |
Protection cover |
|
(Depending on model) |
(Only 26CS41**) |
|
( See p. 21) |
( See p. 22) |
|
Protection cover |
Protection cover |
|
(Only 32CS41**, |
(Only 42CS41**, |
|
32LS31**) |
42LS31**) |
|
( See p. 22) |
( See p. 22) |
<![endif]>ENGLISH
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
Stand Body / Stand Base
(Only 19/22/26LS33**) ( See p. 16)
Stand Body / Stand Base
(Only 32LS33**) ( See p. 16)
Stand Body / Stand Base
(Only 22CS41**) ( See p. 18)
Stand Body / Stand Base
(Only 26CS41**) ( See p. 17)
Stand Body / Stand Base
(Only 32/42LS31**, 32/42CS41**) ( See p. 17)
ASSEMBLING AND PREPARING 13
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
How to use the ferrite core
A ferrite core is used to reduce electromagnetic waves when the power cord is connected to the power outlet. Put the ferrite core on the power cord as shown in the figure below by splitting it apart. It is better to place the ferrite core as close to the TV and the power plug as possible.
(Gray)
[to a wall plug] |
[to the TV] |
[Figure]
[Cross Section of
Ferrite Core]
<![endif]>ENGLISH
<![endif]>ENGLISH
14 ASSEMBLING AND PREPARING
Parts and buttons
■ Image shown may differ from your TV.
Screen
Remote control sensor
Power indicator |
Speakers
OK 
SETTINGS INPUT
|
Power/Standby |
|
indicator |
|
|
||
|
(Can be adjusted using the Power indicator |
||
|
in the OPTiON menu.) |
||
|
|
|
|
Touch button |
description |
||
|
|
|
|
|
Scrolls through the saved programmes. |
||
|
|
|
|
|
Adjusts the volume level. |
||
|
|
|
|
OK |
Selects the highlighted menu option or confirms an input. |
||
SETTINGS |
Accesses the main menu, or saves your input and exits the menus. |
||
|
|
|
|
INPUT |
Changes the input source. |
||
|
|
|
|
/ I |
Turns the power on or off. |
||
|
|
|
|
1All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING 15
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy It is recommended to move the TV in the box or packing material that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power cord and all cables.
yy When holding the TV, the screen should face away from you to avoid damage.
yy When transporting a large TV, there should be at least 2 people.
yy When transporting the TV by hand, hold the TV as shown in the following illustration.
yy When transporting the TV, do not expose the TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
<![endif]>ENGLISH
Loading...