LG 22M47D, 24M47VQ, 24M47H, 24M47D, 24M47HQ User Guide

Owner's Manual

LED LCD MONITOR (LED MONITOR*)

*LG LED Monitors are LCD Monitors with LED Backlighting.

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

22M47D 23M47D 24M47D

22M47VQ 23M47VQ 24M47VQ 22M47H 23M47H 24M47H 22M47HQ 24M47HQ

www.lg.com

ENGLISH

2 TABLE OF CONTENTS

CONTENTS

	3	LICENSE		18 CUSTOMIZING SETTINGS
	4			18 Activating the Main Menu
		ASSEMBLING AND PREPAR-		18 - Main Menu Features
			19		Customizing settings
		ING
	4	Unpacking	19		- Menu Settings
			19		- -Quick Settings
	6	Parts and buttons
			21		- -Picture
	7 - How to Use the Joystick Button
			23		- -General
	8 Moving and Lifting the Monitor
			24		- -Auto Configuration
	9 Setting up the Monitor set
			25		- -Reset
	9 - Attaching the Stand Base
			26		- -Picture mode
	9	- Detaching the Stand Base
	10	- Mounting on a table		27 TROUBLESHOOTING
	10	- Using the cable holder
	12	- Mounting on a wall
	13	USING THE MONITOR SET		29 SPECIFICATIONS‌
			35		Preset Modes (Resolution)
	13	Connecting to a PC
			35		Indicator
	13	- D-SUB connection
	13	- DVI-D connection		36 PROPER POSTURE
	13	- HDMI connection
			36		Proper posture for using the Monitor set.
	14	Connecting to AV Devices
	14	- HDMI connection
	15	Connecting to External Devices
	15	- Peripheral device connection
	16 INSTALLING THE LG MONI-
		TOR SOFTWARE
	16	Installing The Screen Split

LICENSE 3

22M47VQ 22M47H 22M47HQ 23M47VQ 23M47H 24M47H 24M47HQ 24M47VQ

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:

*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.

*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.

ENGLISH

ENGLISH

4 ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

CD(Owner's Manual) /	D-SUB Cable		DVI-D Cable
	( This cable is not included in all
Card
	countries. )
		(
			This cable	is not included in all
				countries. )

		or
Power Cord	AC-DC Adapter
( Depending on the country )		AC-DC Adapter
		( Depending on the country )

HDMI Cable

Stand Body

Stand Base

( This cable is not included in all countries. )

ASSEMBLING AND PREPARING 5

CAUTION

yyDo not use any unapproved accessories to ensure the safety and product life span.

yyAny damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

ENGLISH

6 ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

Power Indicator yyOn: power is on yyOff: power is off

(Joystick Button)

Connection panel (See p.13~15)

NOTE

yyThe joystick button is located at the bottom of the monitor.

ASSEMBLING AND PREPARING 7

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.

Basic Functions

							Power on	Press the joystick button once with your finger to turn on the
								monitor.
							Power off	Press and hold the joystick button once with your finger to turn off
								the monitor.
						◄/►	Volume	You can control the volume by moving the joystick button left/right.
							Control

ENGLISH

ENGLISH

8 ASSEMBLING AND PREPARING

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.

yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.

yyBefore moving or lifting the monitor, disconnect the power cord and all cables.

yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.

yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.

yyWhen moving the monitor, avoid any strong shock or vibrations to the product.

yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.

CAUTION

yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.

ASSEMBLING AND PREPARING 9

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

21 Attach the Stand Body to the monitor set.

2 Attach the Stand Base to Stand Body.

3 Tighten the screw to the right.

Stand Body

Stand Base

Detaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

21 Pull out the Stand Body and Stand Base from the monitor set.

2Turn the screw to the left.

3Pull out the Stand Base.

Stand Body

Stand Base

Stand Body

Stand Base

CAUTION

yyIllustrations in this document represent typical procedures, so they may look different from the actual product.

yyDo not carry the monitor upside down by just holding the stand base. This may cause the monitor to fall off the stand and could result in personal injury. yyWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the moni-

tor screen may cause damage to it.

yyIf you use the monitor panel without the stand base, its joystick button may cause the moni-tor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

ENGLISH

ENGLISH

10 ASSEMBLING AND PREPARING

Mounting on a table

1Lift and tilt the Monitor set into its upright position on a table.

Leave a 100 mm (minimum) space from the wall for proper ventilation.

100 mm

100 mm

100 mm

100 mm

3Press the joystick button on the bottom of the monitor to turn on the monitor.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

Cable holder

or

		ASSEMBLING AND PREPARING 11
	WARNING	NOTE
	When you adjust the angle, do not hold the	Tilt from +20 to -5 degrees up or down to adjust
		the angle of the Monitor set to suit your view.
	bottom of the Monitor set frame as shown on
	the following illustration, as may injure your
	fingers.

ENGLISH

When adjusting the angle, may cause damage or abnormality over excessive force.

Do not touch or press the screen when adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

Front

Rear

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a table.

NOTE

The Kensington security system is optional. You can obtain it from most electronics stores.

ENGLISH

12 ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

100 mm

100 mm

100 mm

100 mm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1If you use screw longer than standard, the monitor might be damaged internally.

2If you use improper screw, the product might be damaged and drop from mounted position.

In this case, LG Electronics is not responsible for it.

Model	22M47D	23M47D	24M47D
	22M47VQ	23M47VQ	24M47VQ
	22M47H	23M47H	24M47H
	22M47HQ		24M47HQ
Wall Mount		75 x 75
(A x B)
Standard		M4 x L10
screw
Number of		4
screws
Wall Mount		RW120
Plate
(Optional)

yyVESA (A x B)

A	B

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper

accessory are not covered by the warranty. yyScrew length from outer surface of back

cover should be under 8mm. Wall mount Pad

Back Cover

Wall mount Pad

Back Cover

Standard screw

Max.8mm

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.