LG Electronics 22LV2500, 32LV3500, 32LV3520, 37LK450, 37LV3500 User Manual

OWNER’S MANUAL

LED LCD TV / LCD TV / PLASMA TV

Please read this manual carefully before operating the set and retain it for future reference.

LED LCD TV MODELS		42LW5000	LCD TV MODELS
19LV2500	32LV3400		26LK330	32LK450
22LV2500	32LV3500	47LW5000	32LK330	37LK450
26LV2500	37LV3500	55LW5000	32LK430	42LK450
32LV2500	42LV3500	42LW5300	42LK430	47LK450
26LV2520	47LV3500	47LW5300	42LK451C	42LK520
32LV2520	55LV3500	55LW5300	47LK451C	47LK520
22LV255C	32LV3520	42LV355B	32LK453C	55LK520
26LV255C	42LV3520	55LV355B	37LK453C
32LV255C	55LV5300	42LV355C	42LK453C
	42LW505C	55LV355C

P/NO : SAC34134216 (1109-REV16)

PLASMA TV MODELS

42PW340 42PW350U 50PW340 50PW350U 42PW350 42PW350R 50PW350 50PW350R 50PZ200

60PZ200

www.lg.com

Downloaded From TV-Manual.com Manuals

ENGLISH

2 LICENSES

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license.”

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

NOTE

yyPlasma : Plasma TV

LCD : LED LCD TV, LCD TV

yyImage shown may differ from your TV.

yyYour TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Downloaded From TV-Manual.com Manuals

IMPORTANT SAFETY INSTRUCTIONS 3

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

-TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Read these instructions.

Keep these instructions.

Heed all warning.

Follow all instruction.

yyDo not use this apparatus near water.

yyClean only with dry cloth.

yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. (Can differ by country)

ENGLISH

Downloaded From TV-Manual.com Manuals

ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

yyOnly use attachments/accessories specified by the manufacturer.

yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yyUnplug this apparatus during lightning storms or when unused for long periods of time.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyNever touch this apparatus or antenna during a thunder or lightning storm.

yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yyCAUTION concerning the Power Cord: It is recommended that appliances be placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and

if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

Downloaded From TV-Manual.com Manuals

IMPORTANT SAFETY INSTRUCTIONS 5

yyDo not expose to dripping or splashing and

U.S.A. provides information with respect to

do not place objects filled with liquids, such

proper grounding of the mast and supporting

as vases, cups, etc. on or over the apparatus

structure, grounding of the lead-in wire to

(e.g. on shelves above the unit).

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

yyGrounding

Electrical Code, ANSI/NFPA 70

Ensure that you connect the earth ground

Antenna Lead in Wire

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

Ground Clamp

plug must be connected to a three-prong

Antenna Discharge Unit

Electric Service

(NEC Section 810-20)

grounded AC outlet). If grounding methods

Equipment

Grounding Conductor

are not possible, have a qualified electrician

Ground Clamp

(NEC Section 810-21)

Power Service Grounding

install a separate circuit breaker. Do not try to

Electrode System

NEC: National Electrical Code

(NEC Art 250, Part H)

ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

yyCleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

Power Supply

scratching. Do not spray water or other

liquids directly on the TV as electric shock

Short-circuit Breaker

may occur. Do not clean with chemicals

yyDISCONNECTING DEVICE FROM THE MAIN

such as alcohol, thinners or benzine.

yyMoving

POWER

The power outlet must remain readily

Make sure the product is turned off,

accessed in the event the device needs to

unplugged and all cables have been

be unplugged.

removed. It may take 2 or more people to

yyAs long as this unit is connected to the AC

carry larger TVs. Do not press or put stress

on the front panel of the TV.

wall outlet, it is not disconnected from the

yyVentilation

AC power source even if the unit is turned

off.

Install your TV where there is proper

yyDo not attempt to modify this product in any

ventilation. Do not install in a confined

space such as a bookcase. Do not cover the

way without written authorization from LG

product with cloth or other materials while

Electronics. Unauthorized modification could

plugged. Do not install in excessively dusty

void the user’s authority to operate this

places.

product.

yyIf you smell smoke or other odors coming

yyANTENNAS Outdoor antenna grounding

from the TV, unplug the power cord contact

(Can differ by country):

an authorized service center.

If an outdoor antenna is installed, follow

yyDo not press strongly upon the panel with

the precautions below. An outdoor antenna

system should not be located in the vicinity

hand or sharp object such as nail, pencil or

of overhead power lines or other electric light

pen, or make a scratch on it.

or power circuits, or where it can come in

yyKeep the product away from direct sunlight.

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

ENGLISH

Downloaded From TV-Manual.com Manuals

ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

yyDot Defect

The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

yyTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

yyViewing 3D Imaging (For 3D TV)

-If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.

-Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.

-Pregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.

-Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.

-Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development.

-Warning for photosensitization seizure: Some

viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV.

Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.

Risk of photosensitization seizure can be reduced with the following actions.

-Take frequent breaks from watching 3D TV.

-For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures.

-Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV.

-Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time.

-Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.

-Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving.

Downloaded From TV-Manual.com Manuals

IMPORTANT SAFETY INSTRUCTIONS 7

LCD

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out

in accordance to the regulations of your local authority.

Downloaded From TV-Manual.com Manuals

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and the receiver.

-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

ENGLISH

ENGLISH

8 TABLE OF CONTENTS

TABLE OF CONTENTS

2LICENSES

3IMPORTANT SAFETY INSTRUCTIONS

8 TABLE OF CONTENTS

49Using the quick menu

50Using the customer support

50- Testing the Picture / Sound

50- Using the product or service information

513D IMAGING (FOR 3D TV)

			51		3D Technology
	10	ASSEMBLING AND PREPARING	51		- When watching 3D imaging
			52		- When using 3D Glasses
	10	Unpacking	52		- 3D Imaging Viewing Range
	14	Optional Extras	53		Viewing 3D Imaging
	15	Parts and buttons
	28	Lifting and moving the TV		55	ENTERTAINMENT
	28	Setting up the TV
			55		- Connecting USB storage devices
	28	- Attaching the stand
	33	- Mounting on a table	56		- Browsing files
	35	- Mounting on a wall	57		- EzSign TV
	36	- Tidying cables	58		- Viewing Videos
			61		- DivX registration code
	37	REMOTE CONTROL	62		- Viewing Photos
			64		- Listening to music
	41	WATCHING TV
			66		CUSTOMIZING TV SETTINGS
	41	Connecting to an antenna or cable
			66		The Main Menus
	41	- Connecting an antenna or basic cable	67		Customizing Settings
	41	- Connecting a cable box	67		- CHANNEL Settings
	42	Connecting to the AC/DC adapter	68		- PICTURE Settings
	42	Turning the TV on for the first time	73		- AUDIO Settings
	43	Watching TV	74		- TIME Settings
	43	Managing channels	75		- LOCK Settings
	43	- Setting up channels	77		- OPTION Settings
	44	- Using favorite channels
	45	- Checking current program info		79	MAKING CONNECTIONS
	47	Using additional options
			80		Connection Overview
	47	- Adjusting aspect ratio
	48	- Changing AV modes	81		Connecting to a HD receiver, DVD or VCR
	48	- Using the input list			player
	49	- Locking the buttons on the TV (Child	81		- HDMI Connection
		Lock)	81		- DVI to HDMI Connection

Downloaded From TV-Manual.com Manuals

82- Component Connection

82- Composite Connection

83Connecting to a PC

83 - HDMI Connection

83- DVI to HDMI Connection

84- RGB Connection

85Connecting to an Audio System

85- Digital optical audio connection

85Connecting to a USB

85Connecting to a Headphone ( LCD )

86SIMPLINK Connection

86- Activating and Using the SIMPLINK menus

87MAINTENANCE

87Cleaning Your TV

87- Screen and frame

87- Cabinet and stand

87- Power cord

87Preventing “Image burn” or “Burn-in” on your TV screen

88TROUBLESHOOTING

90 SPECIFICATIONS

98 IR CODES

100EXTERNAL CONTROL DEVICE SETUP

108 OPEN SOURCE LICENSE

TABLE OF CONTENTS 9

ENGLISH

Downloaded From TV-Manual.com Manuals

10 ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

ENGLISH

Remote control and batteries (AAA)							Owner’s manual			CD manual

(For LV355B series)

Polishing cloth1	EzSign TV Editor
(Depending on model)	S/W & Manual

1Gently wipe the spots on the cabinet with the polishing cloth.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 11

PW340, PW350, PW350U, PW350R, PZ200 series
(Other models)		(For 60PZ200)
x 4	x 3	x 4	x 3
M4 x 26 M5 x 14.5		M4 x 28	M5 x 24
	Screw for assembly		Cable holder	Power Cord holder

					3D Glasses1
Power Cord	Protection cover, Tape	Ferrite core
		(Depending on model)			(Depending on model)

1The number of 3D glasses may differ depending on the model or country.

32LV2500, 32LV2520, 32LV255C, LV3400, LV3500, LV3520, LV355B, LV355C, LV5300, LW5000, LW5300, LW505C series

(32LV2500,					(For 32LV2500, 32LV2520,
					32LV255C, 32LV3400,
32LV2520,
					32/37LV3500, 32LV3520)
32LV255C) (Other models)		(LV5300 series)
x 8	x 8	x 4	x 4
M4 x 14	M4 x 12	M4 x 26	M4 x 16
	Screw for assembly			Cable holder	Screw for fixing
				(Depending on model)
(For LW5000, LW5300,
LW505C series)		(For LW5300 series)		(Except LV3400 series)

FPR 3D Glasses1	Blu-ray player	Composite gender cable
	(BD645)

1The number of 3D glasses may differ depending on the model or country.

19/22/26LV2500, 26LV2520, 22/26LV255C series
x 2	x 2
M4 x 16	M4 x 6
Screw for assembly		Cable holder	Power Cord	AC/DC Adapter
		(Depending on model)

ENGLISH

Downloaded From TV-Manual.com Manuals

12 ASSEMBLING AND PREPARING

LK330, LK430, LK450, LK451C, LK453C, LK520 series

(Except 47LK450, 47LK451C, 47/55LK520)

x 8
M4 x 20
Screw for assembly	Screw for fixing	Protection cover	Power Cord

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.

ENGLISH

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 13

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy( Plasma ) How to use the ferrite core

1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

		10 mm (+/-5 mm)
[to an External device]		[to the TV]
	[Figure 1]	[Cross Section of
		Ferrite Core]

2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.

[to a wall plug]		[to the TV]
	[Figure 2]	[Cross Section of
		Ferrite Core]

3 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug] [to the TV]

	[Figure 3]	[Cross Section of
		Ferrite Core]
4 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to a wall plug.
[to a wall plug]		[to the TV]
[Cross Section of	[Figure 4]
Ferrite Core]

-If there is one ferrite core, follow as shown in Figure 4.

-If there are two ferrite cores, follow as shown in Figures 1 and 2.

-If there are three ferrite cores, follow as shown in Figures 1 and 3.

yy( LCD ) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

AA

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

ENGLISH

Downloaded From TV-Manual.com Manuals

14 ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

This device only works with compatible LG Plasma TV, LED LCD TV or LCD TV.

3D Glasses1	FPR 3D Glasses2	D-sub 15 pin signal cable3
(AG-S230, AG-S250, AG-S270)	(AG-F2**)

1Supports PW340, PW350, PW350R, PW350U, PZ200 series

2	Supports LW5000, LW5300, LW505C series
	The model name or design may be changed depending on the upgrade of product functions,
	manufacturer’s circumstances or policies.
3	When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable
ENGLISH	with a ferrite core to maintain standards compliance for the product.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 15

Parts and buttons

PW340, PW350, PW350U, PW350R, PZ200 series

Side Connection panel

(Other models)(For PZ200 series)

USB		ONLY	SERVICE
		SERVICE
input			ONLY input
HDMI
input	AUDIO R	AUDIO R
AV (Audio		L/
	VIDE	VIDEO
and Video)
input	AV IN 2	AV IN 2

Screen

			Remote control and
			intelligent1 sensors
Speakers
INPUT HOME ENTER	VOL	CH	Touch buttons	2

REMOTE

CONTROL IN

OPTICAL

/DVI IN
VIDEO	AV IN 1	R
	L/MONO
2
RGB IN (PC)
		2	IN
			COMPONENT
		1

AUDIO

Rear Connection

panel (See p.79)

ENGLISH

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

Downloaded From TV-Manual.com Manuals

16 ASSEMBLING AND PREPARING

32LV2500, 32LV2520, LV3500, LV3520, LV5300, LW5000, LW5300 series

Screen

ENGLISH

				Remote control and
				intelligent1 sensors
				Power indicator
Speakers
CH	VOL	ENTER	HOME	INPUT
		or		Touch buttons2
CH	VOL	ENTER	HOME	INPUT
			H

		COMPONENT IN
OPTICAL	(RGB/DVI)	O	Y
DIGITAL
AUDIO OUT	AUDIO IN	VIDE	BP
	AV IN 1
	O

RGB IN(PC)	VIDE		RP
RS-232C IN(CONTROL&SERVICE)	AUDI L/MONOO	AUDI O	L

		R		R
/ DVI IN	2	1	2	1

LAN	OPTICALDIGITAL	ANTENNA/
	AUDIO OUT	CABLE IN

ANTENNA / CABLE IN

USB IN

VIDEO / AUDIO IN 3

AV IN 2 H/P

Rear Connection panel (See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 17

LW505C series

Screen

			Remote control and
			intelligent1 sensors
			Power indicator
Speakers
CH	VOL	ENTER HOME INPUT	Touch buttons	2

RJP

/ DVI IN

LAN

OPTICAL	(RGB/DVI)		COMPONENT IN
DIGITAL
AUDIO OUT	AUDIO IN		O	Y
		AV IN 1	VIDE	BP
		O
RGB IN(PC)		VIDE		RP
RS-232C IN(CONTROL&SERVICE)		AUDIL/MONOO	AUDI O	L
		R		R
2	1		2	1

OPTICALDIGITAL	ANTENNA/
AUDIO OUT	CABLE IN

ANTENNA / CABLE IN

USB IN

VIDEO / AUDIO OUT IN 3

SPEAKER

AV IN 2 EXTERNAL

Rear Connection panel (See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

Downloaded From TV-Manual.com Manuals

18 ASSEMBLING AND PREPARING

LV3400 series

Side Connection panel Screen

INUSB

USB input

CH

VOL

Buttons2

ENTER

HOME

INPUT

	Remote control and
Speakers	intelligent1 sensors
	Power indicator

ENGLISH

		COMPONENT IN
OPTICAL	(RGB/DVI)	O	Y
DIGITAL
AUDIO OUT	AUDIO IN	VIDE	BP
	OAV IN

RGB IN(PC)	VIDE		RP
RS-232C IN(CONTROL&SERVICE)	AUDI L/MONOO	AUDI O	L

		R		R
/ DVI IN	2	1	2	1

ANTENNA / CABLE IN

Rear Connection panel (See p.79)

Button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 19

19/22/26LV2500, 26LV2520 series
Side Connection panel		Screen
USB input	IN
	USB

3IN HDMI input

Headphone output

			Remote control and
			intelligent1 sensors
			Power indicator
	Speakers
CH	VOL	ENTER HOME INPUT	Touch buttons	2

DC-IN

/ DVI IN

OPTICAL	(RGB/DVI)
DIGITAL
AUDIO OUT	AUDIO IN
		OAV IN
RGB IN (PC)		VIDE
		L/MONOO
RS-232C IN(CONTROL&SERVICE)		AUDI
		R
2	1

COMPONENT IN

O	Y
VIDE	BP
	RP
O
AUDI	L
	R

ANTENNA / CABLE IN

Rear Connection panel (See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

Downloaded From TV-Manual.com Manuals

20 ASSEMBLING AND PREPARING

ENGLISH

22/26LV255C series
Side Connection panel		Screen
USB input	IN
	USB

	HDMI input	IN 2
	AV (Audio	AV IN 2
	and Video)
	input	Speakers

Remote control and intelligent1 sensors

Power indicator

			2
CH	VOL	ENTER HOME INPUT	Touch buttons

OPTICAL	AUDIO IN
DIGITAL
AUDIO OUT	(RGB/DVI)
DC-IN
RGB IN (PC)
RS-232C IN(CONTROL&SERVICE)		SPEAKER
		OUT

/ DVI IN	1

	COMPONENT IN
	O	Y
OAV IN 1	VIDE	BP
VIDE		RP
	O
AUDI L/MONOO	AUDI	L
R		R

ANTENNA /

CABLE IN

Rear Connection panel (See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 21

32LV255C, LV355B, LV355C series

Screen

		Remote control and
		intelligent1 sensors
		Power indicator
Speakers
CH	VOL ENTER HOME INPUT	Touch buttons2

	RJP		OPTICAL					AUDIO IN
INTERFACE			DIGITAL
			AUDIO OUT					(RGB/DVI)

RGB IN(PC)
RS-232C IN(CONTROL&SERVICE)
/ DVI IN	1

LAN

COMPONENT IN

SPEAKER	O	Y
OUT
OAV IN 1	VIDE	BP
VIDE		RP
	O
AUDI L/MONOO	AUDI	L
R		R

ANTENNA / CABLE IN

USB IN

AV IN 2 AUDIO / VIDEO IN 2

Rear Connection panel (See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

Downloaded From TV-Manual.com Manuals

22 ASSEMBLING AND PREPARING

ENGLISH

LK450, LK451C series

Side Connection panel

USB input USB

3 HDMI input

	Headphone
	output	R
	AV (Audio	AUDIO
	and Video)	VIDEO
	input
		AV IN 2

Screen

			Remote control and
			intelligent1 sensors
			Power indicator
	Speakers
CH	VOL	ENTER HOME INPUT	Touch buttons	2

	OPTICALDIGITAL	(RGB/DVI)			COMPONENT IN
	AUDIOOUT	AUDIO IN		O		Y
			O	VIDE		BP
			AV IN 1
	RGB IN (PC)		VIDE			RP
			L/MONOAUDI	AUDIO		RL
							ANTENNA /
	RS-232CIN(CONTROL&SERVICE)						CABLE IN
/ DVI IN	2	1	R		2	1	Rear Connection panel
							(See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

Downloaded From TV-Manual.com Manuals

LK453C series

Side Connection panel

USB input USB

3 HDMI input

	Speaker out	T
	AV (Audio	AUDIO R
	and Video)	VIDEO
	input
		AV IN 2

ASSEMBLING AND PREPARING 23

Screen

			Remote control and
			intelligent1 sensors
			Power indicator
	Speakers
CH	VOL	ENTER HOME INPUT	Touch buttons	2

		OPTICALDIGITAL	AUDIO IN
		AUDIOOUT	(RGB/DVI)
				AV IN 1
				O
		RGB IN (PC)		VIDE
		RS-232CIN(CONTROL&SERVICE)		L/MONO
				AUDI
	/ DVI IN	2	1
				R

COMPONENT

IN

	Y
O
VIDE	BP
	RP
O	L
	ANTENNA /
AUDI	CABLE IN
	R

Rear Connection panel (See p.79)

Touch button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

Downloaded From TV-Manual.com Manuals

24 ASSEMBLING AND PREPARING

ENGLISH

26LK330
Side Connection panel	Screen
	CH
USB input
	VOL

Buttons2

HDMI input

Headphone output

AV (Audio

and Video) input

VIDEO AUDIO R IN 3

AV IN 2

ENTER

HOME

INPUT

Remote control

Speakers

Power indicator

		OPTICALDIGITAL	AUDIO IN
		AUDIOOUT	(RGB/DVI)
				AV IN 1
				O
		RGB IN (PC)		VIDE
		RS-232CIN(CONTROL&SERVICE)		L/MONO
				AUDI
	/ DVI IN	2	1
				R

COMPONENT

IN

	Y
O
VIDE	BP
	RP
O	L
	ANTENNA /
AUDI	CABLE IN
	R

Rear Connection panel (See p.79)

Button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 25

32LK330
Side Connection panel	Screen
	CH
USB input
	VOL

Buttons2

HDMI input

Headphone output

AV (Audio

and Video) input

VIDEO AUDIO R IN 3

AV IN 2

ENTER

HOME

INPUT

				Remote control and
				intelligent1 sensors
	Speakers
				Power indicator

		OPTICALDIGITAL	AUDIO IN
		AUDIOOUT	(RGB/DVI)
				AV IN 1
				O
		RGB IN (PC)		VIDE
		RS-232CIN(CONTROL&SERVICE)		L/MONO
				AUDI
	/ DVI IN	2	1
				R

COMPONENT

IN

	Y
O
VIDE	BP
	RP
O	L
	ANTENNA /
AUDI	CABLE IN
	R

Rear Connection panel (See p.79)

Button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

Downloaded From TV-Manual.com Manuals

26 ASSEMBLING AND PREPARING

ENGLISH

LK430 series

Side Connection panel

USB input

HDMI input

Headphone output

AV (Audio

and Video) input

VIDEO L/MONO AUDIO R 3

AV IN 2

Screen

CH

VOL

ENTER Buttons2

HOME

INPUT

Remote control

Speakers

Power indicator

	OPTICALDIGITAL	(RGB/DVI)			COMPONENT IN
	AUDIOOUT	AUDIO IN		O		Y
			O	VIDE		BP
			AV IN 1
	RGB IN (PC)		VIDE			RP
			L/MONOAUDI	AUDIO		RL
							ANTENNA /
	RS-232CIN(CONTROL&SERVICE)						CABLE IN
/ DVI IN	2	1	R		2	1	Rear Connection panel
							(See p.79)

Button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

Downloaded From TV-Manual.com Manuals

ASSEMBLING AND PREPARING 27

LK520 series
Side Connection panel	Screen
	CH
USB input
	VOL

ENTER Buttons2

HOME

INPUT

HDMI input	IN 3

	Headphone
	output	R
	AV (Audio	AUDIO
	and Video)	VIDEO
	input
		AV IN 2

	Remote control and
Speakers	intelligent1 sensors
	Power indicator

	OPTICALDIGITAL	(RGB/DVI)			COMPONENT IN
	AUDIOOUT	AUDIO IN		O		Y
			O	VIDE		BP
			AV IN 1
	RGB IN (PC)		VIDE			RP
			L/MONOAUDI	AUDIO		RL
							ANTENNA /
	RS-232CIN(CONTROL&SERVICE)						CABLE IN
/ DVI IN	2	1	R		2	1	Rear Connection panel
							(See p.79)

Button2	Description
/ I	Turns the power on or off.
INPUT	Changes the input source.
HOME	Accesses the main menus, or saves your input and exits the menus.
ENTER	Selects the highlighted menu option or confirms an input.
- VOL +	Adjusts the volume level.
v CH ^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

Downloaded From TV-Manual.com Manuals

ENGLISH

28 ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in.

yyBefore moving or lifting the TV, disconnect the power cord and all cables.

yyWhen holding the TV, the screen should face away from you to prevent damage.

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

yyWhen transporting a large TV, there should be at least 2 people.

yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

Setting up the TV

Put your TV on a pedestal stand and mount the TV on a table or wall.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

PW340, PW350, PW350U, PW350R, PZ200 series

1Lay the TV with the screen side down on a flat surface.

CAUTION

yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.

2Assemble the parts of the STAND BODY with the STAND BASE of the TV.

Model	Screw for	Number of
	assembly	screws
42/50PW340	M5 x 14.5	3
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200	M5 x 24	3

Stand Body

Stand Base

Downloaded From TV-Manual.com Manuals

				ASSEMBLING AND PREPARING 29
	3 Secure the TV and the stand with the 4			To detach the stand,
	screws.			1 Lay the TV with the screen side down on a flat
	Model	Screw for	Number of	surface.
		assembly	screws	2 Remove the 4 screws and pull the stand away
	42/50PW340	M4 x 26	4
				from the TV.
	42/50PW350
	42/50PW350U
	42/50PW350R			Model	Screw for	Number of
	50PZ200				assembly	screws
	60PZ200	M4 x 28	4	42/50PW340	M4 x 26	4
				42/50PW350
				42/50PW350U
				42/50PW350R
				50PZ200
				60PZ200	M4 x 28	4

CAUTION

yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

3Push the supplied protection cover into the opening at the bottom of the TV until it locks in place.

Attach the protection cover tape.

-This will protect the opening from accumulating dust and dirt.

-When installing the wall mounting bracket, use the Protection cover.

Protection

cover tape

Protection cover

ENGLISH

Downloaded From TV-Manual.com Manuals

ENGLISH

30 ASSEMBLING AND PREPARING

	32LV2500, 32LV2520, 32LV255C, LV3400,		3 Secure the TV and the stand with the 4
	LV3500, LV3520, LV355B, LV355C, LV5300,		screws.

LW5000, LW5300, LW505C series

1Lay the TV with the screen side down on a flat surface.

CAUTION

yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen.

2Assemble the parts of the STAND BODY with the STAND BASE of the TV.

Model	Screw for	Number of
	assembly	screws
32LV2500	M4 x 14	4
32LV2520
32LV255C
LV5300 series	M4 x 26	4

Stand Body

Stand Base

Model	Screw for	Number of
	assembly	screws
LV3400, LV3500,	M4 x 12	4
LV3520, LV355B,
LV355C, LW5000,
LW5300, LW505C
series

Stand Body

Model	Screw for	Number of
	assembly	screws
32LV2500	M4 x 14	4
32LV2520
32LV255C
LV5300 series	M4 x 16	4
LV3400, LV3500,	M4 x 12	4
LV3520, LV355B,
LV355C, LW5000,
LW5300, LW505C
series

CAUTION

yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

To detach the stand,

1Lay the TV with the screen side down on a flat surface.

2Remove the 4 screws and pull the stand away from the TV.

Model	Screw for	Number of
	assembly	screws
32LV2500	M4 x 14	4
32LV2520
32LV255C
LV5300 series	M4 x 16	4
LV3400, LV3500,	M4 x 12	4
LV3520, LV355B,
LV355C, LW5000,
LW5300, LW505C
series

Stand Base

Downloaded From TV-Manual.com Manuals