ENGLISH
OWNER’S MANUAL
LED TV
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating the your TV and retain it for future reference.
23MA73D
27MA73D
www.lg.com
ENGLISH
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 |
LICENSES |
|
35 |
CUSTOMIZING SETTINGS |
|
|
35 |
Accessing main menus |
|
4 |
INSTALLATION PROCEDURE |
36 |
USING THE USER GUIDE |
|
|
|
|||
5 |
ASSEMBLING AND PREPARING |
5 |
Unpacking |
8 |
Parts and buttons |
10Lifting and moving the TV
11Setting up the TV
11 - Attaching the Stand
13- Mounting on a table
14- Tidying cables
15- Detaching the Stand
16- Mounting on a wall
36Accessing User Guide menu.
36- Using the TV menu
36- Using the Remote Control
37MAINTENANCE
37Cleaning Your TV
37Screen and frame
37Cabinet and stand
37Power cord
38Preventing “Image burn” or “Burn-in” on your TV screen
18 WATCHING TV
18 Turning the TV on for the first time
20 MAKING CONNECTIONS
20Connecting an antenna
21Connecting to a HD receiver, DVD, VCR player or Gaming device
21- HDMI connection
22- HDMI to DVI connection
23- Component connection
24- Composite connection
25- Euro Scart connection
26Headphone connection
27Connecting to a USB
27Connecting to a CI Module
28MHL connection
29Connecting to a PC
30- HDMI connection
31- HDMI to DVI connection
32- RGB connection
39 TROUBLESHOOTING
39General
40SPECIFICATIONS
33 REMOTE CONTROL
LICENSES 3
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
ENGLISH
ENGLISH
4 INSTALLATION PROCEDURE
INSTALLATION PROCEDURE
1Open the package and make sure all the accessories are included.
2Attach the stand to the TV.
3Connect an external device to the TV.
NOTE
yyImage shown may differ from your TV.
yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yyThe available menus and options may differ from the input source or product model that you are using.
yyNew features may be added to this TV in the future.
ASSEMBLING AND PREPARING 5
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
CAUTION
yyDo not use any pirated items to ensure the safety and product life span.
yyAny damages or injuries by using pirated items are not covered by the warranty.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
|
B |
B |
|
|
*A |
10 mm |
|
|
|
||
A |
|
*B |
18 mm |
|
A |
|
ENGLISH
6 ASSEMBLING AND PREPARING
23MA73D 
27MA73D
ENGLISH
Remote control |
CD (Owner's Manual). |
|
Batteries (AAA) |
Cards |
|
(See p.33, See p.34) |
|
|
|
|
|
Stand Body |
Stand Base |
|
(See p.11, See p. 15) |
(See p.11, See p. 15) |
|
|
|
|
Power Cord |
|
AC-DC Adapter |
(See p.13) |
|
(See p.13) |
|
|
|
or |
or |
MHL passive cable |
Isolator |
(See p.28) |
(Depending on the country) |
|
Cable Holder
(See p.14)
RGB cable
(See p.32)
ASSEMBLING AND PREPARING 7
NOTE
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
or
Cable / Antenna
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ENGLISH
8 ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
Remote Control Sensor
Standby Light yyLighting On :
When Power is turned off yyLighting Off :
When Power is turned on
Touch Buttons 
|
|
|
|
|
|
NOTE |
|
|
All of the buttons are touch sensitive and can be |
||
|
operated through simple touch with your finger. |
||
|
Power and control touch button are located on the |
||
|
bottom. |
||
|
|
|
|
Touch button |
|
|
Description |
|
|
||
|
Scrolls through the saved programmes. |
||
|
|
||
|
Adjusts the volume level. |
||
|
|
||
OK |
Selects the highlighted menu option or confirms an input. |
||
|
|
||
SETTINGS |
Accesses the main menus, or saves your input and exits the menus. |
||
|
|
||
INPUT |
Changes the input source. |
||
|
|
||
/ I |
Turns the power on or off. |
||
|
|
|
|
ASSEMBLING AND PREPARING 9
ENGLISH
(PC)
1AV
(MONO)
AV2 IN
Connection panel (See p.20)
ENGLISH
10 ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.
CAUTION
Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.
yyIt is recommended to move the TV in the box or packing material that the TV originally came in.
yyBefore moving or lifting the TV, disconnect the power cord and all cables.
yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
yyWhen holding the TV, the screen should face away from you to prevent the screen from scratches.
yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright, never turn the TV on its side, or tilt towards the left or right.
ASSEMBLING AND PREPARING 11
Setting up the TV
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1Place the TV with the screen side down on a flat and cushioned surface.
CAUTION
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
yyWhen attaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
2Attach the Stand Base from the Stand Body by turning the screw to the right with a Coin.
CAUTION
Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
3 Attach the Stand Body from the TV.
ENGLISH
12 ASSEMBLING AND PREPARING
CAUTION
ENGLISH
yyDo not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury.
yyThe illustration shows a general example of installation and may look different from the actual product.
yyDo not carry the monitor upside-down by holding the stand body as this may cause it to fall off, resulting in damage or injury.
yyThe illustration shows a general example of installation and may look different from the actual product.
|
ASSEMBLING AND PREPARING 13 |
|
|
|
|
Mounting on a table |
2 Connect the AC-DC Adapter and Power Cord |
|
|
to a wall outlet. |
|
1Lift and tilt the TV into its upright position on a table.
Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
ENGLISH
WARNING
When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers.
CAUTION
Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur.
CAUTION
Do not place the TV near or on sources of heat, as this may result in fire or other damage.
NOTE
Tilt from +20 to -5 degrees up or down to adjust the angle of the TV to suit your view.
-5 +20
Front |
Rear |
ENGLISH
14 ASSEMBLING AND PREPARING
Tidying cables |
Using the Kensington security system |
|
1Attach the cable holder to the edge of stand body securely.
2Gather and bind the cables with the supplied cable holder.
The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the TV and a table.
NOTE
The Kensington security system is optional. You can obtain additional accessories from most electronics stores.
CAUTION
attachment, if the cable holder is pulled with excessive force, it may fall off.
Loading...