Kyocera FS-3040P, FS-2020, FS-3540, FS-6970, FS-3040 Service Bulletin 2F8 0039 B272 1

(Revised issue 1)

(Page.1/3)

Service Bulletin

Ref. No. 2F8-0039 (B272)

<Date> December 28, 2011

Subject

Notes on Replacement of the FD ASSY SP (New Cable Tie for the Motor Wire)

FS-2000D, FS-3900DN, FS-4000DN, FS-6950DN,

Model

FS-2020D, FS-3920DN, FS-4020DN, FS-6970DN,

FS-3040MFP, FS-3140MFP, FS-3040MFP+, FS-3140MFP+,

FS-3540MFP, FS-3640MFP

This time, the description with (-->) was revised from the previous information.

<Number of changes: 4> FS-6950DN was deleted since no production is planned; some descriptions were addded (P1); Some explanatory descriptions were revised (P2 ,3).

Topic

Please handle the cable tie included in the FD ASSY SP as follows.

Handling of the Cable Tie

The FD ASSY having the part number below uses the new motor with a longer wire by 40 mm for common use with other models. Therefore, please bundle it up with the neighboring wires by applying the cable tie in order to avoid the wire from slacking when installing the motor and fitting the wire to the board. (Cut the surplus tie with scissors, nippers, etc. after the wires were bundled up.)

Tie the motor wire

with the cable tie

Neighboring wires (R)

Connect board R

Neighboring wires (R)

New FD ASSY motor wire

Tie the motor wire

with the cable tie

Connect board R

New FD ASSY motor wire

Cables of the MFP models

(-->) Cables of the A4 printer models and FS-6970DN

The cable of FS-6970DN was changed to the one shown in the figure on the page 3 since September 2011.

KYOCERA MITA Europe B.V.

European Service & Development Center (ESDC)