Service Bulletin
(Page.1/2)
Ref. No. 2H9-0030 (B364)
<Date> November 18, 2011
Subject
Preventive Measures for Omitting the ISU Lock Lever Release (Reduction of the C3100/ISU Home Position Error)
FS-1028MFP, FS-1128MFP, FS-1024MFP, FS-1124MFP,
Model
FS-3040MFP, FS-3140MFP, FS-3040MFP+, FS-3140MFP+, FS-3540MFP, FS-3640MFP, FS-C2026MFP, FS-C2126MFP, FS-C2026MFP+, FS-C2126MFP+, FS-C2526MFP, FS-C2626MFP
Topic
The lock lever is set to lock the ISU during transport. If it was omitted to release the lock lever, the C3100 error (ISU home position error) will occur when the power is turned ON at setup of the machine. Therefore, a leaflet to instruct to release the lock lever was newly added.
(Please refer to (2) Removing the Tapes in 1-2-2 Unpacking in the Service Manual.)
Content: Move the lock lever to the position of release*. When turning the power ON with the lock lever unreleased, error message will be displayed.
*Please turn the power OFF, release the lock lever and turn the power ON again if the 3100 error was caused by this reason.
Content of the Leaflet
Please refer to the illustration below.
Leaflet
Where to Find the Leaflet
Please refer to the illustration below for the position of the leaflet.
Lock lever
leaflet
Fixing tape
Scanner unit section
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)