KitchenAid 5KEK1722AAC, 5KEK1722ACB, 5KEK1722ACU, 5KEK1722AER, 5KEK1722AOB Owner's Manual

Chaleira Elétrica

KXC13AV

W11387677A_V7.indd 1W11387677A_V7.indd 1 1/28/2020 6:36:31 PM1/28/2020 6:36:31 PM

PARTS AND FEATURES

3

4

5

2

6

1

8

7

1 1.7 L (7 cup) Electric Kettle
2 Water filter
3 Lid release button
4 Water fill location

2 |

W11387677A_V7.indd 2W11387677A_V7.indd 2 1/28/2020 6:36:32 PM1/28/2020 6:36:32 PM

5 Control panel
6 Water gauge window
7 Base with power cord

8 Underside of base with power cord

wrap

ENGLISH

ELECTRIC KETTLE SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
followed, including the following:

1. Read all instructions. Misuse of appliance may result in personal injury.

2. Do not touch hot surfaces. Use handles.

3. To protect against re, electric shock and injury to persons do not immerse
cord, plugs or appliance in water or other liquid. Avoid spillage on the
connector.

4. This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

5. Children should be supervised to ensure that they do not play with the
appliance.

6. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.

7. Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest Authorized Service Facility for examination, repair, or
adjustment.

8. Use of replacement parts not recommended by manufacturer may result in re,
shock, or injury to persons.

9. Do not let the cord hang over the edge of table or counter, or touch hot
surfaces.

10. Do not place on or near a hot gas or electric burner or in a heated oven.

| 3

W11387677A_V7.indd 3W11387677A_V7.indd 3 1/28/2020 6:36:32 PM1/28/2020 6:36:32 PM

ELECTRIC KETTLE SAFETY

11. Close supervision is necessary when any appliance is used by or near children.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.

13. The Electric Kettle should only be used to heat water.

14. Do not use Electric Kettle without lid properly closed.

15. Do not use Electric Kettle with loose or weakened handle.

16. Do not clean Electric Kettle with cleaners, steel wool, or other abrasive materials.

17. Do not overll kettle. If the kettle is overlled, boiling water may be ejected.

18. This product is designed for indoor household use only. Not designed for
commercial use.

19. The heating element surface is subject to residual heat after use. Do not touch
hot surface. Use handles.

20. The appliance is only to be used with the base provided.

21. Refer to the “Care and Cleaning” section for instructions on cleaning the
surfaces in contact with food.

22. This appliance is intended to be used in household and similar applications such
as:

- staff kitchen areas in shops, ofces, or other working environments;

- farmhouses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

SAVE THESE INSTRUCTIONS

4 |

W11387677A_V7.indd 4W11387677A_V7.indd 4 1/28/2020 6:36:32 PM1/28/2020 6:36:32 PM

ENGLISH

ELECTRIC KETTLE SAFETY

ELECTRICAL REQUIREMENTS

Voltage: 220-240 Volts
Frequency: 50-60 Hertz
Wattage: 2400 Watts

NOTE: If the plug does not fit in the outlet,

contact a qualified electrician. Do not modify
the plug in any way.

Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an

Electrical Shock Hazard

Plug into an earthed outlet.

Do not remove earth prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these
instructions can result in death,
fire, or electrical shock.

BATTERY ACTIVATION (OPTIONAL)

outlet near the appliance.
A short power supply cord (or detachable

power supply cord) should be used to reduce
the risk resulting from becoming entangled in
or tripped over a longer cord.

1

To provide power to the display when the
Electric Kettle is not on the base, insert
2 AA batteries (not included) in the battery
housing on the underside of the kettle.

NOTE: If batteries have been added and
the Electric Kettle is off the base, the display
will show the current temperature of the
water. Placing the Electric Kettle back on the
base will allow full functionality of the kettle
to change the temperature, heat, and hold
temperature.

| 5

W11387677A_V7.indd 5W11387677A_V7.indd 5 1/28/2020 6:36:32 PM1/28/2020 6:36:32 PM

OPERATING THE ELECTRIC KETTLE

BEFORE FIRST USE

Before first use, fill the Electric Kettle to the maximum level, then boil and discard the
water. The temperature can be displayed in Celsius (C) or Fahrenheit (F). To change
settings, hold the “-” and “+” buttons down at the same time.

NOTE: The Electric Kettle is designed for water only. Do not put any other liquids or
substances in the Electric Kettle.

FILLING THE ELECTRIC KETTLE WITH WATER

1

Open the lid of the Electric Kettle by
pressing the lid release button.

NOTE: There must be a minimum of .25 L of water for the Electric Kettle to operate. Do
not exceed the “Max” fill line.

3

2

Fill Electric Kettle. The water level is
displayed in .25 L increments. If there is no
water in the kettle, the water drop icon will
display and the alert tone will sound for 6
seconds. Remove water if it exceeds the
“Max” fill line.

4

Push the lid down so it locks into the
closed position. You will hear a clicking
sound which indicates the lid is locked.

6 |

W11387677A_V7.indd 6W11387677A_V7.indd 6 1/28/2020 6:36:33 PM1/28/2020 6:36:33 PM

Place the Electric Kettle on the base.

ENGLISH

OPERATING THE ELECTRIC KETTLE

HEATING WATER

1

Place the Electric Kettle on the base. The
display will show the default temperature
(100°C / 212°F). Press the “+” or “-”
buttons to select your desired water
temperature. See the “Temperature guide”
for more information.

2

Press the START/CANCEL button to save
temperature and to begin heating the
water. “On” will be displayed on the screen
to indicate the Electric Kettle is heating. The
“Start/Cancel” button does not function
when the Electric Kettle is off the base.

°C °F

50 122
60 140
70 158
80 176
90 194

100 212

The Electric Kettle has 6 programmed
temperature settings.

3

Once the water reaches 50°C or 122°F,
the current temperature will show on the
main display and continue heating until the
desired temperature is reached.

4

Once the desired temperature has been
reached, 3 beeps will sound and the word
“Off” will show in the top corner of the
display.

W11387677A_V7.indd 7W11387677A_V7.indd 7 1/28/2020 6:36:33 PM1/28/2020 6:36:33 PM

5

If batteries have been added and the
Electric Kettle is off the base, push any
button to display the current temperature
and the battery icon will display the battery
charge level.

| 7

OPERATING THE ELECTRIC KETTLE

HEATING WATER

NOTE: The temperature will blink 5 times and return to standby after 5 seconds. This will
continue until after the water temperature drops below the desired temperature.

TEMPERATURE GUIDE

Use this guide for outstanding results from your KitchenAid Electric Kettle.

60° C (140°F) 70° C (158°F) 80° C (176°F) 90° C (194°F) 100° C (212°F)

Delicate Tea Green Tea

Gyokuro
Sencha

White Tea

Silver Needle

USING THE HOLD TEMP MODE

Blooming Tea Black Tea

Chai

Green
White

Green Tea

Bencha
Genmaicha

Earl Grey
English Breakfast

Hot Chocolate Chai

Oolong Tea Herbal Tea

Boil Water

Red

Tisanes

Instant Soup
Oatmeal
Rooibos Tea
Yerba Maté

1

To activate the Hold Temp mode, leave the
Electric Kettle on the base after reaching
the selected temperature and press the
HOLD TEMP button. The Electric Kettle
will maintain the desired temperature for
up to 30 minutes.

2

The Hold Temp mode may be canceled by
pressing the START/CANCEL button.

NOTE: Hold Temp mode works for all temperatures. When using Hold Temp mode at
100° C (212°F), mode will activate at 92° C (198°F) and 100° C (212°F), depending on
altitude.

8 |

W11387677A_V7.indd 8W11387677A_V7.indd 8 1/28/2020 6:36:33 PM1/28/2020 6:36:33 PM