HOTPOINT/ARISTON LTF 11M121 EU User Manual

Operating instructions

DISHWASHER

	EN		RU		KZ
English, 1			Русский, 16		Қазақша, 31

Contents	EN

Product Fiche, 2

Precautions, advice and Assistance, 3-4

General safety Disposal

Saving energy and respecting the environment Assistance

Installation, 5-6

Positioning and levelling

Connecting the water and electricity supplies

Advice regarding the first wash cycle

Technical data

LTF 11M121

Description of the appliance, 7

Overall view Control panel

Loading the racks, 8-9

Lower rack

Cutlery basket

Upper rack

Cutlery tray

Adjusting upper rack

Start-up and use, 10

Starting the dishwasher

Measuring out the detergent

Wash cycles, 11

Table of wash cycles

Special wash cycles and Options, 12

Rinse aid and refined salt, 13

Measuring out the rinse aid Measuring out the refined salt

Care and maintenance, 14

Shutting off the water and electricity supplies Cleaning the dishwasher

Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters

Leaving the machine unused for extended periods

Troubleshooting, 15

1

Product Fiche

EN
		Product Fiche
		Brand			HOTPOINT ARISTON
		Model			LTF 11M121
		Rated capacity in standard place settings (1)			14
		Energy efficiency class on a scale from A+++ (low consumption) to D	(high consumption)		A++
		Energy consumption per year in kWh (2)			265.0
		Energy consumption of the standard cleaning cycle in kWh			0.93
		Power consumption of the off-mode in W			0.5
		Power consumption of the left-on mode in W			5.0
		Water consumption per year in litres (3)			2520.0
		Drying efficacy class on a scale from G (low efficacy) to A (high efficacy)			A
		Programme time for standard cleaning cycle in minutes			190’
		The duration of the left-on mode in minutes			10
		Noise in dB(A) Re 1pW			41
		Built-in model			Yes
		NOTES
		1) The information on the label and fiche relates to the standard cleaning cycle, this programme is suitable to clean normally soiled
		tableware and it is the most efficient programme in terms of combined energy and water consumption. The standard cleaning cycle
		corresponds to the Eco cycle.
		2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. Actual energy
		consumption depends on how the appliance is used.
		3) Based on 280 standard cleaning cycles. Actual water consumption	depends on how the appliance is used.

2

Precautions, advice and Assistance

This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should

therefore be read carefully.

Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine.

Please read these instructions carefully: they contain important information on installation, use and safety.

This appliance is designed for domestic use or similar applications, for example:

-staff kitchen areas in shops, offices and other work environments;

-farmhouses;

-use by guests in hotels, motels and other residential settings;

-bed & breakfasts.

General safety

•The appliance should not be operated by people (including children) with reduced physical, sensory or mental capacities, or by inexperienced people who are not familiar with the product, unless supervision or instructions on how to use it are provided by someone who assumes responsibility for their safety.

•An adult must supervise children at all times to prevent them from playing with the appliance.

•The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

•The appliance must be used by adults only to wash domestic crockery in accordance with the instructions in this manual.

•The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the machine exposed to rain and storms.

•Do not touch the appliance when barefoot.

•When unplugging the appliance always pull the plug from the mains socket. Do not pull on the cable.

•The water supply tap must be shut off and the plug should be removed from the electrical socket before cleaning or maintaining the appliance.

•If the appliance breaks down, do not under any circumstances touch the internal parts in an attempt to perform the repair work yourself.

•Do not lean or sit on the open door of the appliance: this may cause the appliance to overturn.

•The door should not be left open as it may create

a dangerous obstacle.

• Keep detergent and rinse aid out of reach of EN children.

•The packaging material should not be used as a toy for children.

Disposal

•Disposal of packaging material: observe local legislation so that the packaging may be reused.

•The European Directive 2012/19/EU relating to Waste Electrical and Electronic Equipment

(WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be collected separately in order to optimise the re-using and recycling rate of the materials inside the machine, while preventing potential damage to the environment and public health. The crossed-out dustbin symbol is marked on all products to remind the owners of their obligations regarding separated waste collection.

For further information relating to the correct disposal of household appliances, owners may contact the relevant public authority or the local appliance dealer.

Saving energy and respecting the environment

Saving water and energy

•Only begin a wash cycle when the dishwasher is full. While waiting for the dishwasher to be filled, prevent unpleasant odours using the Soak cycle (see Wash cycles).

•Select a wash cycle that is suited to the type of crockery and to the soil level of the crockery using the Table of wash cycles:

-for dishes with a normal soil level use the Eco wash cycle, which ensures low energy/water consumption levels.

-If the load is smaller than usual activate the Half Load option* (see Start-up and use).

•If your electricity supply contract gives details of electricity-saving time bands, run wash cycles when electricity prices are lower. The Delayed Start button * (see Start-up and use) helps you organise the wash cycles accordingly.

* Only available in selected models.

3

		Phosphate-free and chlorine-free detergents
	EN
		containing enzymes
		• Westronglyrecommendthatyouusedetergents
		that do not contain phosphates or chlorine, as
		these products are harmful to the environment.
		• Enzymes provide a particularly effective action
		at temperatures around 50°C. As a result
		detergents containing enzymes can be used in
		conjunction with low-temperature wash cycles
		in order to achieve the same results as a normal
		65°C wash cycle.
		• To avoid wasting detergent, use the product
		in appropriate quantities based on the
		manufacturer’s recommendations, the hardness
		of the water, the soil level and the quantity
		of crockery to be washed. Even if they are
		biodegradable, detergents contain substances
		which may alter the balance of nature.

Assistance

Before contacting Assistance:

•Check whether the problem can be resolved using the

Troubleshooting guide (see Troubleshooting).

•Restart the programme to check whether the problem has ceased to exist.

•If the problem persists, contact the Authorised

Technical Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

•The type of malfunction.

•The appliance model (Mod.).

•The serial number (S/N).

This information can be found on the appliance data plate

(see Description of the appliance).

4

Installation

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Arrange the dishwasher so that its sides or back panel are in contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop* (see the Assembly Instruction sheet.)

3. Position the dishwasher on a level sturdy floor. If the floor is uneven, the front feet of the appliance should be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. To adjust the height of the rear foot, turn the red hexagonal bushing on the lower central part at the front of the dishwasher using a hexagonal spanner with an opening of 8 mm. Turn the spanner in a clockwise direction to increase the height and in an anticlockwise direction to decrease it (see Building-in Instruction sheet attached to the documentation.)

Connecting the water and electricity supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on the water hoses or electricity supply cable.

The appliance must be connected to the water supply network using new hoses.

Do not use old piping.

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

Connecting the water inlet hose

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be supplied with hot water from the mains supply (if you

have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance.)

The water pressure must be within the values indicated in the Technical Data table (see adjacent information.)

The hose should not be bent or compressed.

	Connecting the water outlet hose
						EN
	Connect the outlet hose (without bending it) to a drain duct with
	a minimum diameter of 4 cm.
	The outlet hose must be at a height ranging from 40 to 80 cm
	from the floor / surface where the dishwasher rests (A).

Before connecting the water outlet hose to the sink drain, remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees anti-flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstances should the water inlet hose be cut, as it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make sure that:

•The socket is earthed and complies with current regulations.

•the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door

(see Description of the appliance);

•The power supply voltage falls within the values indicated on the data plate on the inside of the door.

•The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards (see Assistance.)

* Only available in selected models.

5

		Anti-condensation strip*
	EN
		After installing the dishwasher, open the door and stick the
		adhesive transparent strip under the wooden shelf in order
		to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack, if any. Immediately before the first washing, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

The machine has a buzzer/set of tones (depending on the dishwasher model) to inform the user that a command has been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/ display may vary in colour and may have a flashing or fixed light (depending on the dishwasher model).

The display provides useful information concerning the type of wash cycle, drying/wash-cycle phase, remaining time, temperature etc etc.

Technical data

Dimensions			width 59.5 cm
			height 82 cm
			depth 57 cm
Capacity			14 standard place-settings
Water supply			0,05 ÷ 1MPa (0.5 ÷ 10 bar)
pressure			7,25 – 145 psi
Power supply voltage			See appliance data plate
Total absorbed power			See appliance data plate
Fuse			See appliance data plate
			This dishwasher conforms to the
			following European Community
			Directives:
			-2006/95/EC (Low Voltage)
			-2004/108/EC (Electromagnetic
			Compatibility)
			-2009/125/EC (Comm. Reg.
			1016/2010) (Ecodesign)
			-97/17/EC (Labelling)
			-2012/19/EC (WEEE)

* Only available in selected models.

6

Description of the appliance

Overall view	EN

1. Upper rack

2. Upper sprayer arm

3. Tip-up dispensers

4. Rack height adjuster

5. Lower rack

6. Lower sprayer arm

7. Washing filter

8. Salt dispenser

9. Detergent and rinse-aid dispensers and device Active Oxigen*

10. Data plate

11. Control panel****

Control panel

	Select wash cycle button		Delayed start button
			Multi-functional tablets button and indicator light
	ON-OFF/Reset button	Salt indicator light
	and indicator light		Extra dry button and indicator light

Rinse aid indicator light

Zone Wash button

Short Time button

Wash cycle number and

Zone Wash indicator lights

and indicator light

remaining time indicator light

Delayed start indicator light

***Only in completely built-in models. * Only available in selected models.

The number and type of wash cycles and options may vary depending on the dishwasher model.

7

Loading the racks

	EN	Tips
		Before loading the racks, remove all food residues from the
		crockery and empty liquids from glasses and containers. No
		preventive rinsing is needed under running water.
		Arrange the crockery so that it is held in place firmly and does
		not tip over; and arrange the containers with the openings facing
		downwards and the concave/convex parts placed obliquely,
		thus allowing the water to reach every surface and flow freely.
		Make sure that the lids, handles, trays and frying pans do not
		prevent the sprayer arms from rotating. Place any small items
		in the cutlery basket.
		Since plastic dishes and non-stick frying pans usually retain more
		water drops, their drying will be not so good as that of ceramic
		or stainless-steel dishes.
		Lightweight items such as plastic containers should be placed
		in the upper rack and arranged so that they cannot move.
		After loading the appliance, make sure that the sprayer arms
		can rotate freely.

Several dishwasher models are fitted with tip-up sectors*. They can be used in a vertical position when arranging dishes or in a horizontal position (lower) to load pans and salad bowls easily.

Cutlery basket

The basket is equipped with top grilles for improved cutlery arrangement. The cutlery basket should be positioned only at the front of the lower rack.

Lower rack

The lower rack can hold pans, lids, dishes, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides.

Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip-up compartments on the upper rack

Very soiled dishes and pans should be placed in the lower rack because in this sector the water sprays are stronger and allow a higher washing performance.

*Only available in selected models with different numbers and positions.

Upper rack

Load this rack with delicate and lightweight crockery such as glasses, cups, saucers and shallow salad bowls.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging tea/ dessert saucers or in a lower position to load bowls and food containers.

8

Tip-up compartments with adjustable position

The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack.

Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots.

Cutlery tray*

Some dishwasher models are fitted with a sliding tray which can be used to hold serving utensils or small cups. For optimum washing performance avoid positioning bulky crockery directly below the tray. The cutlery tray can be removed (see Figure).

Before loading the tray, make sure the supports are properly coupled to the upper rack (see Figure).

* Only available in selected models.

Theupperrackcanbeadjustedforheightbasedonrequirements:

high position to place bulky crockery in the lower rack and low EN position to make the most of the tip-up compartments/sectors

by creating more space upwards.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

If the rack is equipped with a Lift-Up device* (see figure), lift it up by holding its sides. To restore the lower position, press the levers (A) at the sides of the rack and follow the rack down.

Unsuitable crockery

•Wooden crockery and cutlery.

•Delicate decorated glasses, artistic handicraft and antique crockery. Their decorations are not resistant.

•Parts in synthetic material which do not withstand high temperatures.

•Copper and tin crockery.

•Crockery soiled with ash, wax, lubricating grease or ink. The colours of glass decorations and aluminium/silver pieces can change and fade during the washing process. Some types of glass (e.g. crystal objects) can become opaque after a number

of wash cycles too.

Damage to glass and crockery

Caused by:

•Type of glass and glass production process.

•Chemical composition of detergent.

•Water temperature of rinse cycle.

Tips:

•Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe.

•Use a delicate detergent suitable for crockery.

•Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over.

9

Start-up and use

		Starting the dishwasher
	EN
		1.	Turn the water tap on.
		2.	Open the door and press ON-OFF button: the ON/OFF
		indicator lights, options and the display come on.
		3.	Measure out the detergent. (see adjacent information).
		4.	Load the racks (see Loading the racks).

5. Select the wash cycle in accordance with the type of crockery and its soil level (see table of wash cycles) by pressing the P button.

6.Select the wash options*. (see Special wash cycles and options).

7.Start the wash cycle by shutting the door.

8.The end of the wash cycle is indicated by beeps and by the flashing of the wash cycle number on the display. Open the door, switch off the appliance by pressing the ON/OFF button, shut off the water tap and unplug the appliance from the electricity socket.

9.Wait for a few minutes before removing the crockery, in order to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption.

AUTO WASH CYCLES*:some models of dishwashers are equipped with a special sensor which can be used to assess the level of soiling and automatically setting the most efficient and economic wash cycle accordingly.

The duration of the Auto wash cycles may vary due to the operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process, it is possible to change the cycle, provided that it has only just begun: open the door taking care to avoid the escaping steam, by pressing and holding the ON/OFF button, the machine will switch off. Switch the machine back on using the ON/OFF button and select the new wash cycle and any options desired; start the cycle by closing the door.

Adding extra crockery

Without switching off the machine, open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Shut the door and the cycle will begin from the point at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored.

* Only available in selected models.

Measuring out the detergent

A good wash result also depends on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution.

Based on how soiled the items are, the amount can be adjusted to individual cases using powder or liquid detergent.

In the case of normally soiled items, use approximately either 35 gr (powder detergent) or 35 ml (liquid detergent). If tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

For good washing results also follow the instructions shown on the detergent box.

For further questions please ask the detergent producers' Advice Offices.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only. Place the amount of detergent for pre-washing directly inside the tub.

1.When measuring out the detergent refer to the Table of wash cycles to add the proper quantity. Compartment B comprises a level showing the maximum quantity of liquid or powder detergent that can be added to each cycle.

2.Remove detergent residues from the edges of the dispenser and close the cover until it clicks.

3.Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place.

The detergent dispenser automatically opens up at the right time according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS option, because it adjusts the cycle so that the best washing and drying results are always achieved.

Only use detergent which has been specifically designed for dishwashers.

DO NOT USE washing-up liquid.

Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended.

The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option.

To achieve the best results from each washing and drying cycle, powder detergent, liquid rinse aid and salt should be used.

10

Wash cycles

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.

Based on the different conditions of use, the wash-cycle duration and data can change. EN

The number and type of wash cycles and options may vary depending on the dishwasher model.

		Wash cycle		Approximate	Water	Energy
		which
	Wash cycle		Options	duration of wash	consumption	consumption
		include
				cycles	(l/cycle)	(KWh/cycle)
		drying
	1. Eco	Yes	Delayed start – Tabs –	03:10’	9,0	0,93
			Extra Dry
	2. Auto Intensive	Yes	Delayed start – Tabs –	02:00’ - 03:10’	14,0 - 15,5	1,40 - 1,70
			Extra Dry – Zone wash –
			Short Time
	3. Auto Normal	Yes	Delayed start – Tabs –	01:30’ - 02:30’	14,5 – 16,0	1,15 - 1,30
			Extra Dry – Zone wash –
			Short Time
	4. Auto Fast	No	Delayed start – Tabs	00:40’ - 01:20’	13,0 - 14,5	1,15- 1,25
	5. Duo Wash	Yes	Delayed start – Tabs –	02:00’	18,0	1,25
			Extra Dry – Short Time
	6. Delicate	Yes	Delayed start – Tabs –	01:40’	11,0	1,05
			Extra Dry
	7. Express 30’	No	Delayed start – Tabs	00:30’	9,0	0,50
	8. Goodnight	Yes	Delayed start – Tabs –	03:30’	15,0	1,15
			Extra Dry
	9. Soak	No	Delayed start	00:12’	4,5	0,01
	10. Sanitazing	Yes	Delayed start	01:20’	10,0	1,15
	11. Self Clean	No	Delayed start	00:50’	8,0	0,80

Instructions on wash-cycle selection and detergent dosage

1.The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 29 gr/ml + 6 gr/ml** – 1

Tab (**Quantity of pre-washing detergent)

2.Heavily soiled dishes and pans (not to be used for delicate items). 35 gr/ml – 1 Tab

3.Normally soiled pans and dishes. 29 gr/ml + 6 gr/ml** – 1 Tab

4.Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab

5.Wash spread over the two racks: delicate on upper rack and heavy-duty for pans on lower rack. 35 gr/ml – 1 Tab

6.Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab

7.Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab

8.Optimum performance ensured. Ideal for night-time operation. 35 gr/ml – 1 Tab

9.Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.

10.High-temperature disinfecting cycle. Ideal to clean crockery and feeding bottles. 30 gr/ml – 1 Tab

11.Dishwasher cleaning cycle to be used when the dishwasher is EMPTY with special detergents. Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W.

11

Special wash cycles and Options

Notes:

EN Optimum performance levels when using the “Fast" and "Express

30’” cycles can be achieved by respecting the specified number

of place settings.

To reduce consumption, only run the dishwasher when it is full.

Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address:

[e-mail]

Multi-functional tablets (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTIFUNCTIONAL TABLETS button; the corresponding indicator light/symbol will light up. If the button is pressed again, the option will be deselected.

The “Multi-functional tablets” option results in a longer wash cycle.

The use of tablets is only recommended for models having this option and it is not recommended with wash cycles which do not specify the use of multi-functional tablets.

Wash options

If an option is not compatible with the selected wash cycle (see table of wash cycles), the corresponding LED flashes rapidly 3 times and beeps will sound.

Delayed start

The start of the wash cycle may be delayed for a period of time between 1 and 12 hours.

1.Press the DELAYED START button: the corresponding symbol appears on the display; each time you press the button, the time (1h, 2h, etc. up to max. 12h) from the start of the selected wash cycle will be increased.

2.Select the cycle and close the door: the timer will begin counting down;

3.Once this time has elapsed, the indicator light switches off and the wash cycle begins.

To adjust the delay time and select a smaller period of time, press the DELAYED START button. To cancel it, press the button repeatedly until the selected delayed start indicator light switches off. The wash cycle will start automatically as soon as the door is shut.

Short Time

This option can be used to reduce the duration of the main wash cycles while, maintaining the same washing and drying performance levels. After selecting the wash cycle, press the SHORT TIME button; the illumination of the corresponding indicator light indicates its selection. Press it again to deselect it.

Zone Wash

This option makes it possible to carry out the wash cycle in the selected rack only. Select the wash cycle and then press the ZONE WASH button: the selected rack lights up and the wash cycle starts in the selected rack only. Press the button again to deselect the option.

The option is available with the following wash cycles:

Intensive and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVE ZONE washing. This wash cycle is ideal for very soiled mixed loads, e.g. pans and saucepans, dishes with heavy encrustation or difficult-to-clean crockery (grater, vegetable mill, dirty cutlery). The spraying pressure is stronger and the washing temperature higher, thus ensuring optimum handling of stubborn stains.

Select the option and the Normal cycle to start the SAVING ZONE washing. This function makes it possible to reduce energy consumption. Cycle duration might change.

Remember to load the crockery in the selected rack only

Extra drying

To improve the dryness level of the crockery, press the EXTRA DRYING button and the indicator light/symbol will light up. If it is pressed again, the option will be deselected. A higher temperature during the final rinsing and a longer drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of the wash cycle.

12

Rinse aid and refined salt

Only use products which have been specifically designed for dishwashers.

Do not use table/industrial salt or washing-up liquid. Follow the instructions given on the packaging.

If using a multi-functional product it is not necessary to add any rinse aid. However, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. (Follow the instructions given on the packaging).

If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID indicator lights will stay lit.

Measuring out the rinse aid

Rinse aid makes it easier for the crockery to dry, as water runs off the surfaces more readily and therefore does not leave streaks or marks. The rinse aid dispenser should be filled:

•When the LOW RINSE AID indicator light* on the control panel is illuminated, a reserve supply of rinse aid is still available for 1-2 cycles;

A	X
M

1.Open the dispenser “D” by pressing and pulling up the tab on the lid;

2.Carefully introduce the rinse aid as far as the maximum reference notch of the filling space - avoid spilling it. If this happens, clean the spill immediately with a dry cloth.

3.Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you may adjust the quantity of rinse aid used. Switch on and off the dishwasher using the ON/OFF button. Press the P button three times. Press the ON/OFF button, the set level appears on the display (set to factory level).

Adjust the rinse aid supply level with the P button.

Press the ON/OFF button to save the adjustment setting.

The rinse aid level can be set to ZERO, in such a case the rinse aid will not be supplied and the low rinse aid indicator light in case of running out.

A maximum of 4 levels can be set according to the dishwasher model.

•If there are streaks on the crockery, set to a low number (1-2).

•In case of drops of water or limescale marks, set to a high number number (3-4).

Setting the water hardness

Every dishwasher is equipped with a water softener which, by using refined salt designed especially for this type of appliance, supplies water without limescale which is then used to wash the crockery.

This dishwasher offers a setting which helps to reduce pollution and optimises washing performance in accordance with the water hardness level in your area. This information can be obtained from your local water supplier.

Switch on and off the dishwasher using the ON/OFF button. Press

and hold the P button for a few seconds until you hear a beep. EN

Switch on the dishwasher with the ON/OFF button, the set level appears on the display (water softener set to medium level).

Adjust the water hardness level with the P button, (1-2-3-4-5* see water hardness table) up to a max. of 5 levels.

Press the ON/OFF button to save the adjustment setting.

Even if using multi-functional tablets, the salt dispenser should still be filled.

Water Hardness Table					Average salt dispenser
					capacity duration**
level	°dH		°fH	mmol/l	months
1	0	- 6	0 - 10	0 - 1	7 months
2	6 - 11		11 - 20	1,1 - 2	5 months
3	12	- 17	21 - 30	2,1 - 3	3 months
4	17	- 34	31 - 60	3,1 - 6	2 months
5*	34	- 50	61 - 90	6,1 - 9	2/3 weeks

For values between 0°f and 10°f, we do not recommend the use of salt. * a setting of 5 may increase cycle duration.

** 1 wash cycle per day.

(°dH = hardness measured in German degrees - °f = hardness measured in French degrees – mmol/l = millimoles per litre)

Measuring out the refined salt

In order to obtain the best possible results from a wash cycle, make sure that the salt dispenser is never empty.

Refined salt removes limescale from the water, thus avoiding the formation of deposits on crockery.

The salt dispenser is located in the lower part of the dishwasher (see Description) and should be filled:

•When the green float* cannot be seen by simply looking at the cap of the salt dispenser;

•When the LOW RINSE AID indicator light on the control panel is illuminated *;

1.Remove the lower rack and unscrew the cap (anticlockwise).

2. The first time you do this: fill the water

tank right up to its edge.

3. Position the funnel* (see figure) and

fill the salt dispenser up to the edge

(approximately 1 kg). It is normal for a

little water to leak out.

4. Remove the funnel* and wipe any salt residues away from the opening; rinse the cap under running water and then screw it on, the head facing downwards so as to let the water flow out of the four slots (star-shaped arrangement)

in the lower part of the cap (cap with green float*).

It is advisable to perform this procedure every time you add salt to the dispenser.

Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash cycle (this could damage the water softener beyond repair).

When necessary, measure out the salt before a wash cycle so that any saline solution which has leaked out of the salt dispenser is removed.

* Only available in selected models.

13

Care and maintenance

EN

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid leaks.
•	Always unplug the appliance when cleaning it and when
	performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the control panel
	can be cleaned using a non-abrasive cloth which has been
	dampened with water. Do not use solvents or abrasive
	products.
•	Any marks on the inside of the appliance may be removed
	using a cloth dampened with water and a little vinegar.
Preventing unpleasant odours
•	Always keep the door of the appliance ajar in order to avoid
	moisture from forming and being trapped inside the machine.
•	Clean the seals around the door and detergent dispensers
	regularly using a damp sponge. This will avoid food becoming
	trapped in the seals, which is the main cause behind the
	formation of unpleasant odours.
Cleaning the sprayer arms
Food residue may become encrusted onto the sprayer arms
and block the holes used to spray the water. It is therefore
recommended that you check the arms from time to time and
clean them with a small non-metallic brush.
The two sprayer arms may both be removed.
	To remove the upper sprayer arm,
	turn the plastic locking ring in an
	anti-clockwise direction. The upper
	sprayer arm should be replaced
	so that the side with the greater
	number of holes is facing upwards.

The lower sprayer arm can be

removed by pressing on the side

tabs and pulling it upwards.

Cleaning the water inlet filter*

If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Re-place the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters or if the filter is loose.

• After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below:

1.Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2.Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2);

3.Slide out the stainless-steel plate filter A. (fig. 3).

4.Inspect the trap and remove any food residues. NEVER

REMOVE the wash-cycle pump protection (black detail) (fig.4).

After cleaning the filters, re-place the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

Leaving the machine unused for extended periods

•Disconnect the appliance from the electricity supply and shut off the water tap.

•Leave the door of the appliance ajar.

•When you return, run a wash cycle when the dishwasher is empty.

* Only available in selected models.

14