HT-380BPC, 8800BPC, 9700C OM.qxd 10/16/08 11:42 AM Page 1
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Use this fan only as described in this manual. Other use not recommended may cause fire, electric shock or injury to persons.
2.This product is intended for household use ONLY and not for commercial, industrial or outdoor use.
3.To protect against electric shock, do not place fan in window, immerse unit, plug or cord in water or spray with liquids.
4.This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
5.Close supervision is necessary when any appliance is used by or near children.
6.Turn the fan to the OFF position and unplug the fan from the outlet when not in use, when moving the fan from one location to another, before cleaning and before removing the fan grille.
TECH FORCE
POWERHIGH VELOCITY FANS
HT-380 Series
HT-8800 Series
HT-9700 Series
7.To disconnect the fan, first turn control to the OFF position, grip the plug and pull it from the wall outlet. Never pull by the cord.
8.Do not operate the fan in the presence of explosive and/or flammable fumes.
9.Do not place the fan or any parts near an open flame, cooking or other heating appliance.
10.Do not operate the fan with a damaged cord or plug or if the product malfunctions, is dropped or damaged in any manner (see warranty).
11.Avoid contact with moving fan parts.
12.The use of attachments not recommended by the manufacturer may be hazardous.
13.Place the fan on a dry level surface.
14.Do not operate if the fan housing is removed or damaged. Do not operate the fan if the grille is removed or not properly assembled.
15.Do not operate on desktops or tabletops. This fan is intended for use on floors only.
16.A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace a loose or worn outlet.
WARNING: To Reduce The Risk of Fire or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.
The Honeywell trademark is used by Kaz, Inc. under license from Honeywell International Inc.
HT-380BPC, 8800BPC, 9700C OM.qxd 10/16/08 11:42 AM Page 2
INTRODUCTION
The Tech Force High Velocity Air Circulator Fans are aerodynamically designed to give you the versatility of changing this fan's angular direction simply by adjusting the fan to ANY desired angular output (Fig.1). Upon using this fan, you will feel a strong and powerful air stream that will quickly move air in order to cool an area rapidly and efficiently.
FOR ENERGY
SAVINGS ALL YEAR
Fig. 1 |
Honeywell Air Circulator Fans can help save energy and can lower monthly utility bills all year round. Our air circulators increase distribution of cooler air from your air conditioner or warmer air from your heating system creating a vortex of air flow for increased comfort. Increased air flow allows the air conditioning and heating systems to be used at lower settings to help save you money.
In the summer: |
In the winter: |
Circulate cool |
Circulate warm |
air by using |
air. Position |
with window |
your air |
or central air |
circulator in an |
conditioning. |
open location |
|
for upward air |
Circulate cool |
movement. Run |
air upstairs. |
it on a low |
|
setting to move |
|
the hotter air |
|
from the ceiling |
|
and circulate |
|
the warmer air |
|
throughout the |
|
room. |
Increase Heating Source Efficiency: Use with other heat sources, such as wood stoves, baseboard heaters, and or vents to help circulate the warm air throughout the room.
Box, packaging materials and all plastic parts are recyclable.
Contact your local recycler for more details.
HT-380BPC, 8800BPC, 9700C OM.qxd 10/16/08 11:42 AM Page 3
HT-380 SERIES OPERATION
Be sure the fan is in the OFF position.
•Place your fan on a dry, level surface.
•Plug the power cord into a polarized 120 volt AC wall outlet.
•To operate your Tech Fan, press the control button once to turn the fan on in high speed (III), press a second time to change to medium speed (II), press a third time to change fan to the low speed (I), press a fourth time to turn the fan off (Fig. 2a & 2b).
•Adjust the fan to the desired position (Fig. 3).
•To move the fan, turn the fan OFF and pick it up by the handle (Fig. 4).
High
Medium
Low
Fig. 2a |
Fig. 2b |
Fig. 3 |
Fig. 4 |
HT-8800/HT-9700 SERIES OPERATION
•Be sure the fan is in the OFF position.
•Place your fan on a dry, level surface.
•Plug the power cord into a polarized 120 volt AC wall outlet.
•Each fan is independently operated. To operate the fans, turn the control knob to the desired fan speed: HT-9700 series-2 speeds, High (II) or Low (I) or HT-8800 series-3 speeds, High (III), Medium (II), or Low (I) (Fig. 5).
•Adjust the fans to the desired position (Fig. 6).
•To move the fan, turn the fan OFF (O) and pick it up by the reach through handle (Fig. 7).
Fig. 5 |
Fig. 6 |
Fig. 7 |
Loading...