Quick Installation Guide
Hitachi Ultrastar SSD400S.B
SAS 6Gb/s Solid State Drive
Models: HUSSL4040BSS600
HUSSL4020BSS600
HUSSL4010BSS600
HUSSL4040BSS601
HUSSL4020BSS601
HUSSL4010BSS601
Handling precautions
•CAUTION: This drive can be damaged by ESD (Electric Static Discharge). Any damages incurred to the drive after its removal from the shipping package and the ESD protective bag are the responsibility of the user.
•Do not open the ESD bag containing the drive until you are ready to install the drive.
•Do not apply pressure on the drive during handling and installation.
•To prevent damage from impact or vibration always set the drive down gently.
•Handle the drive carefully by the edges.
•Save the packaging materials including the ESD bag in the event that the hard drive must be returned.
Installing the hard drive
1.Record the serial number and part number of your hard drive for future reference.
2.Turn off the computer and remove the computer system cover.
3.Unplug the computer.
4.Before handling the hard drive, discharge any static electricity from yourself and your clothing. With one hand touch an unpainted metal surface on the computer chassis, and then touch the ESD bag with the other hand for a minimum of two seconds.
5.Remove the hard drive from the ESD bag.
Page 1 of 2 |
version 1.0 |