3-Axis Stabilized Handheld Gimbal for Smartphone
Guilin Feiyu Technology Incorporated Company
V 1.1ENUser Manual
Product overview
1. Structure
Smartphone shown in illustrations is for reference only
Micro USB port
Tilt axis
Cross arm
Roll axis
Vertical arm
Trigger button
Built-in battery
Wrist strap hole
2、Included items
( Cell phone charging port）
Smartphone holder
Pan axis
Micro USB port
Hand grip
Wrist strap Micro USB cable
Function button
Bluetooth shutter
release button
Tripod
1/4-20 Thread mount
Telescoping hand
retractable and
extendable
（0-183mm）
Status indicator
Joystick
Focus button
1
Operation guide
1. Gimbal charging
Please fully charge the battery before powering on the gimbal for the first time
Charging with Micro USB cable Indicator is red in charging status, and becomes
green when battery full.
Micro USB cable
(1) Please install the smartphone before powering on the gimbal.
!
(2) When not in use, turn off the gimbal and then remove the smartphone.
5V/2A USB charger
(not included)
2. Smartphone charging
Charge the phone via cable and choose the corresponding cable according to charging port.
Micro USB Port
3. Insert smartphone
It’s recommended to remove your smartphone protective case.
Smartphone holder width range : 57-84mm.
Place smartphone in holder so that the phone is snug against the back of the holder.
2
If the smartphone is unbalanced after being mounted, refer to the following
steps to make adjustment.
Leftward
Cross arm
Rightward
Best balance
（1）If smartphone tilts to the left,pull cross arm out to the right until phone is
horizontal.
（2）If smartphone tilts to the right,push cross arm in to the left until phone is
horizontal.
4.Smartphone rotation
90°
1
Vertical Shooting
It is effective only when it is set right from
the pitch axis ,please see the graph
Single click
Press & Hold
Hold the stabilizer in horizontal
90°
2
Vertical Shooting
Double clicks
3
90°
3
4
Reset
90°
Tip：
Load weight：
100~200g
Load weight：
≤130g
5. Power on / off
Make sure the smartphone is secure before powering on the gimbal.
When battery is low, the status indicator will blink red three times every 5 seconds.
Please charge gimbal .
Power on：press and hold the function button until the status indicator turns green and gimbal beeps.
Power off：press and hold the function button until the status indicator changes from a flashing red to
a solid red light and gimbal beeps.
Functions modes
Operation method
Status Indicator Explanation
The current mode of the gimbal can be
identified by the indicator status.
Indicator status
Blue light flashes once
Blue light flashes twice
Constant Blue light
Blue light k eeps flashing
Red light keeps flashing Gimbal powering off
Bluetooth shutter release button
By connecting bluetooth or Vicool App, you
can operation as follow
Single click
Press & Hold
Troubleshooting: if the gimbal fails to connect to the Vicool App, power off the gimbal. Press and hold
both the bluetooth shutter release button and the function button to reset the bluetooth connection.
Mode / Status
Pan mode
Follow mode
Lock mode / gimbal initializing
/ motion control mode
Initialization failure/
malfunction
Low powerRed light flashes three times
Mode / Indicator status Button
Photo / Status indicator flashes
green once
Video / Status indicator remains
solid green during recording
Status indicator
Function button
Bluetooth shutter
release button
Explanation of joystick control
Left
Down
Joystick
Up
Right
4
The firmware upgrade may occur manual operation function and the actual product
features do not match. Please get the latest version manual on the official website.
Function button
Single click
Double clicks
Triple clicks
Four clicks Both the panning and tilting directions can be rotatedMotion Control mode
Five clicks Initialization
Trigger button
Press & Hold
Double clicks Reset to default
Function
Panning Mode
/ Lock Mode
Follow mode
Switching camera lens It needs to be used with Vicool APP
Explanation
Single tap to switch between panning mode and lock mode
In the follow mode, the joystick is pushed to the left / right ,
to push and control the angle is -30 ° ~ + 30 °,push it up ward
or down ward to realize pitching control.Under follow mode,
single click the function button and enter into panning mode
After the initialization succeeds or fails, you can click the
function button to wake up the gimbal
Function Explanation
Temporary Lock
In the pan mode or follow mode, holding the trigger button
temporarily locks panning and tilting until released
Centers the camera away from the user on all 3 axes ( pan,
tilt and roll) and switches back to the default pan mode
Function ExplanationFocusing button
Sliding up-down Adjust focus
Adjust field-of-view (FOV)(It needs to be used with Vicool APP)
Modes
Panning mode (Default mode )⸺The rolling and tilting direction are fixed, and
the smartphone moves according to the hand movement direction of the user.
Follow mode
according to the hand movement direction of the user.
Lock mode⸺The orientation of the smartphone is fixed.
Reset⸺Return to pan mode, all to return to default.
Manual Lock
Smartphone can be manually positioned while in lock mode , follow mode or pan mode.
Both the pan and tilt can be manually set.
⸺The rolling direction is fixed, and the smartphone moves
Manually move smartphone to desired position, and
hold for half a second.New tilt and/or pan positions are
Motion Control Mode
The gimbal can easily create constant speed moves by using the motion control mode.
This mode can be used for recording both regular video and
best results, attach gimbal to the FeiyuTech tripod, or other tripod, to keep it completely still.
1.Set motion speed in Vicool App
To set the motion speed, connect to the Vicool App and select desired speed from the
motion control option in the settings menu.
automatically saved.
timelapse photography. For
5
Motion control speed reference table
Vimble2 Rotation speed
12
18
24
30
1
seconds
seconds
seconds
/ turn
/ turn
2.Enter motion control mode by
clicking the function button 4 times
/ turn
seconds
/ turn
4.Set rotation end position
2
minute
minutes
/ turn
/ turn
3.Set rotation start position
5.The gimbal is motion control from rotation start position
to rotation end position
4
8
15
30
minutes
/ turn
minutes
/ turn
minutes
/ turn
minutes
/ turn
hour
/turn
(default)
Tilt axis
Pan axis
Record the first position (rotation start position)
by manually moving smartphone to desired
position. Hold in position for half a second.
Click the function button to record rotation
start position.
1
4
8
hours
hours
/ turn
/ turn
Tilting
Exit operations:
1.After auto-rotation is finish, the stabilizer automatically exits auto-rotation mode and enters the follow mode.
2.Enter the motion control mode or motion control setting, double click the trigger button to exit the motion
control mode and reset the gimbal.
Pan axis
Record the second position
(rotation end position) by
manually moving smartphone
to desired position. Hold in
position for half a second. Click
the function button to record
rotation end position.
The stabilizer automatically returns to
the starting position, and the pitch axis
pan axis
and the
uniformly to the ending position
according to the set rotation speed,
and enter the follow mode at the
ending position.
start to rotate
Gimbal Initialization
Initialize gimbal when:
(1) Smartphone fails to remain level. (2) Gimbal has no been used for a long period of time.
(3) Gimbal is used in extreme temperature variations.
Click the function button five times.
Themotors will stop working. Status
indicatorturns solid blue.
Note: if the initialization is not successful, click the function button to wake up. restart initialization process.
Place the gimbal on a flat, horizontal surface. The
gimbal will automatically initialize after a few
seconds detecting no movement. The blue light will
flash three times to indicate end of initialization.
6
After the initialization is successful,
click the function button to wake up.
Download App and firmware upgrade
1. Download App
Android version iOS version
(1) Android users please use browser QR code scan plug-in to download；
iOS users scan the QR code to download；
Android users please use Google Play, 360 Mobile Assistant, wandoujia.
Vicool
Vicool
www.feiyu-tech.com to download.
2. Firmware upgrade
Connect the gimbal to the Vicool App, to upgrade the firmware though
the App.
Updata
Query Update
Updating...
;daolnwod ot ” “ rof hcraes ot erotS ppA esu esaelp sresu SOi )2(
:etis laicffio eht tisiv ro daolnwod ot ” “ rof hcraes ot moc
Vicool
7
Technical Specifications
118mm
76.4mm
323mm
194.7mm
110.5mm
323mm
Max. tilting range Load weight320°
Max. rolling range 320°
Max. panning range
Operation time
Adaption phone
Weight g smartphone)nidulcni ton（ g284
320°
operation time in motion shooting: around 5 hours; operation time in
normal shooting: around 10 hours
mobile phone width range 57-84mm)（senohptrams
210g
D I S C L A I M E R
Any user for illegal purpose prohibited. Users are responsible for use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of
this product (including direct, indirect or third-party losses).
For any unknown sources of using, we will not be at any services.
Updating and changes of product firmware and program me may cause changes in function
descriptions in this user manual, please read the instructions carefully before upgrading the
firmware and use the corresponding user manual.
You can get the latest user manual from the official website: www.feiyu-tech.com
FeiyuTech reserves the right to amend this manual and the terms and conditions of use the gimbal
at any time.
Attention
Please correctly assemble the gimbal in accordance with the diagram.
Please install the smartphone before turning on the gimbal.
When the gimbal is not in use or placed on the table, please ensure it is powered off.
8
Guilin Feiyu Technology Incorporated Company
+86(0)773 2320865
Due to software and hardware improvements, your actual product might differ from the descriptions
and pictures in this user manual. You can get the latest user manual from the official website.
For more information, please visit our official website
Loading...