DYNEX TV2216FM, TV2216FK, TV2214FM, TV2214FK, TV2212FM Datasheet

TV22..F

TV22..F

Fast Recovery Diode

Replaces March 1998 version, DS4210-2.2

DS4210-3.0 January 2000

APPLICATIONS

■Induction Heating

■A.C. Motor Drives

■Snubber Diode

■Welding

■High Frequency Rectification

■UPS

FEATURES

■Thermal Fatigue Free Pressure Contact

■High Surge Capability

■Low Recovery Charge

VOLTAGE RATINGS

Type Number	Repetitive Peak	Conditions
	Reverse Voltage
	VRRM
	V
TV22 16F M or K	1600	VRSM = VRRM + 100V
TV22 14F M or K	1400
TV22 12F M or K	1200
TV22 10F M or K	1000
TV22 08F M or K	800
TV22 06F M or K	600

For 3/4" 16 UNF thread, add suffix K, e.g. TV22 16FK. For M16 thread, add suffix M, e.g. TV22 16FM.

For stud anode add 'R' to type number, e.g. TV22 16FMR.

KEY PARAMETERS

			VRRM	1600V
			IF(AV)	305A
			IFSM	5000A
			Qr	70μC
			trr	3.2μs

Outline type codes: DO9.

See Package Details for further information.

CURRENT RATINGS

Symbol	Parameter			Conditions			Max.	Units
I	Mean forward current	Half wave resistive load, T			case	= 65oC	305	A
F(AV)
I	RMS value	T	case	= 65oC			346	A
F(RMS)

1/7

TV22..F

SURGE RATINGS

	Symbol	Parameter	Conditions	Max.	Units
	IFSM	Surge (non-repetitive) forward current	10ms half sine; with 0% VRRM, Tj = 150oC	5.0	kA
	I2t	I2t for fusing		125 x 103	A2s
	IFSM	Surge (non-repetitive) forward current	10ms half sine; with 50% VRRM, Tj = 150oC	-	kA
	I2t	I2t for fusing		-	A2s

THERMAL AND MECHANICAL DATA

Symbol	Parameter	Conditions		Min.	Max.	Units
R	Thermal resistance - junction to case		dc	-	0.16	oC/W
th(j-c)
Rth(c-h)	Thermal resistance - case to heatsink	Mounting torque 35.0Nm		-	0.06	o
		with mounting compound				C/W
Tvj	Virtual junction temperature	On-state (conducting)		-	150	oC
Tstg	Storage temperature range			-55	175	oC
-	Mounting torque			30.0	35.0	Nm

CHARACTERISTICS

Symbol		Parameter				Conditions		Typ.	Max.	Units
V		Forward voltage	At 750A peak, T			case	= 25oC	-	1.6	V
	FM
I	RRM	Peak reverse current	At V	RRM	, T = 150oC			-	40	mA
					case
	trr	Reverse recovery time						-	3.2	μs
QRA1		Recovered charge (50% chord)	IF = 750A, diRR/dt = 100A/μs					-	70	μC
IRM		Reverse recovery current	Tcase = 125oC, VR = 100V					-	43	A
	K	Soft factor						1.8	-	-
VTO		Threshold voltage	At Tvj = 150oC					-	1.0	V
	rT	Slope resistance	At Tvj = 150oC					-	0.8	mΩ
V		Forward recovery voltage	di/dt = 1000A/μs, T = 125oC					-	-	V
	FRM						j

2/7

TV22..F

DEFINITION OF K FACTOR AND QRA1

QRA1 = 0.5x IRR(t1 + t2)

dIR/dt	t2	k = t1/t2
t1		τ
0.5x IRR
IRR

CURVES

F

Instantaneous forward current I - (A)

3000 Measured under pulse conditions

2500

2000

Tj = 150˚C

1500

Tj = 25˚C

1000

500
1.0	1.5	2.0	2.5	3.0

Instantaneous forward voltage VF - (V)

Fig.1 Maximum (limit) forward characteristics

3/7