INTRODUCTION
The Clarion BCX100 is a Sonic Bass Enhancer that allows you to choose from three different fixed 18db per octave lowpass crossover points. It also features a delayed remote turn-on circuit that will trigger the amplifiers turn-on circuit 3ms later, eliminating any remote turn-on pop.
The BCX100 includes the following features:
•Selectable Lowpass Crossover
•Remote Subwoofer Level Control
•Gold-Plated RCA input/output connectors
•Delayed Remote turn-on circuit
•Power-on LED
•Subsonic Filter
ABOUT THE MANUAL AND WARRANTY
To start enjoying your new Clarion BCX100 Sonic Bass Enhancer, please read the instructions listed in this manual. Keep all instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty service. Also, save your original sales receipt as proof of purchase.
TABLE OF CONTENTS
Description • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •2 Input/Output Connections and Audio Controls • • • • • • • • • • • • • • •3 Mounting Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •4 Wiring Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •4 Applications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •6 Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •7 Product Specs • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •7
DESCRIPTION
The Clarion BCX100, Sonic Bass Enhancer contains a lowpass crossover that is selectable at 70Hz, 90Hz, and 120Hz. The crossover slope is 18db per octave.
The dash mounted bass level control provides a convenient way to adjust the bass without having to leave your seat.
The BCX100 features a remote turn-on circuit that will turn on the amplifier 3ms after the system comes on to eliminate any system turn-on pop. The subsonic filter allows the subwoofer amp to work efficiently by eliminated non-audible lower frequencies that waste the power output of the amplifier.
2
INPUT/OUTPUT CONNECTIONS AND AUDIO CONTROLS
The top panel of BCX100 contains the controls for the crossover as shown below:
Figure 1-
1 Power Connector |
5 RCAOutput |
2 Power Indicator |
6 Remote Sub Level Connector |
3 RCA Input |
7 Remote Sub Level Control |
4 Sub Bass Frequency Switch |
|
•Power Connector - Four pin connector for power, ground, remote turn-on in, and remote turn-on out.
•Power Indicator - The power indicator will light up when the Sonic Bass Enhancer is on.
•Gold-Plated RCA Input/Output Connectors - For increased durability the
BCX100 features Gold-plated RCAconnectors.
•Subwoofer Crossover Frequency Adjustment - Adjusts the crossover frequency to match your subwoozfer. The crossover frequency can be set to one of three different settings: 70Hz, 90Hz, and 120Hz.
•Remote Sub Level Control - When the remote sub level control is plugged into the BCX100, the remote sub level control will adjust the sub output level.
3
Loading...