LS6
Surface Mountable Illuminated Switch LS6 Series
LS6J LS6U
■ /Outline drawing
LS6J /LS6J type
LED /without LED
3
1
5.2
2
4
ø3.9
ø2.3
|
|
|
1 |
3 |
1.55 |
2 |
2.5 |
2 |
4 |
0.5
LED /with LED |
|
|
|
1 |
4 |
5.2 |
|
|
|
||
2 |
5 |
UR,HR |
|
Polarity is reversed |
|||
3 |
6 |
||
on the UR and HR. |
|||
|
|
ø3.9
ø2.3
1.55 |
|
2.5 |
1 |
4 |
2 |
2 |
5 |
||
|
|
|
3 |
6 |
0.5
/Unit : mm
The following soldering patterns are recommended for
reflow-soldering:
/For reflow soldering
LED /without LED |
LED /with LED |
1.35 |
3.55 |
1.35 |
0.9 |
|
|
0.9 3.7 |
0.9 1.1 1.1 |
0.5 0.5 |
1.55 3.15 1.55
1.65 2.95 1.65
LED
(LS6J/ LED )
Location and number of LED(s)(Applicable only to LS6J and U types)
NO. |
1 |
2 |
|
Code No. |
|||
|
|
3 |
4 |
5 |
Features
1.5.2mm×5.2mm2.5mm 5mm 2
2. の融通性が高く、2
3.LED 1 (1 ×1 ) 2(2 × 1 1 ×2 )(LED)
1.This is an ultra-thin type of surfacemountable illuminated switch based on a new concept which makes possible two versions of different thicknesses (2.5mm, 5mm) on
the same basic structure of 5.2× 5.2mm.
2.The small size of switches allows a high level of frexibility in layout, with the three different thicknesses available, permitting greater freedom of combination with other components, making set design simple.
3.LEDs are fitted on each corner of the switch, in the following combinations: 1LED (1 color×1); 2 LEDs (2 color or 1 color×2), and 4 LEDs (max. 2 colors). A switch without LED is also available.
4.High-speed mounting using a chip mounting machine is possible due to the lightness and structural advantages of the switch.
5.Refiow soldering is possible using a reflow furnace.
■ /Code for Parts
LS6 J1
M - 1 / T
/Series
/Thickness
J 2.5mm
U 5.0mm
/Operating force
1 1.18N 120gf
2 1.96N 200gf
3 2.75N 280gf
/Kind of switch spring
M /Switch
LED (LED )/Location and number of LED(s)
LED ( 1) 1 5 No. /
Choose one number of the five code numbers from the illsutration below under 1 for the desired location and number of LED(s). J LED /
This digit is not applicable to both J and U types without LED.
LED (LED )/Color of LED
LED (LED )( 2)/Color of another LED
LED 2 /Applicable only to two LEDs version
/Packing mode
Non-coded Bulk packing
T ( )
T Taping (standard mode)
( 1) No.2,4 LED No.5
LED
( 1) For code No.2 and 4 the LED of longer wave length is located to the left and shorter one to the right viewing from the center of the switch. For code No.5 the LED on the left is of longer wave length and the right of shorter wave length.This rule has nothing to do with the type of one LED and two LEDs of the same color.
66