Bosch GDR 14,4V-LI, GDR 18V-LI, GDS 14,4V-LI, GDS 18V-LI, GDX 14,4V-LI User Manual

OBJ_BUCH-839-005.book Page 1 Wednesday, November 25, 2015 3:49 PM

Robert Bosch Power Tools GmbH

70538 Stuttgart

GERMANY

GDR | GDS | GDX Professional

www.bosch-pt.com

1 609 92A 23R (2013.01) O / 49 ASIA	14,4 V-LI | 18 V-LI

en Original instructions cn tw

ko

th id Petunjuk-Petunjuk untuk

Penggunaan Orisinal

vi Bản gốc hướng dẫn sử dụng

OBJ_BUCH-839-005.book Page 2 Wednesday, November 25, 2015 3:48 PM

2 |

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6

. . . . . . . . . . . . . . . . . . . . . . 12

. . . . . . . . . . . . . . . . . . . . . . 17

. . . . . . . . . . . . . . . . . . . . . . . . . .

22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Bahasa Indonesia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Halaman 34

Tiếng Việt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang 40

	1 609 92A 23R | (25.11.15)				Bosch Power Tools

OBJ_BUCH-839-005.book Page 3 Wednesday, November 25, 2015 3:48 PM

| 3

	Bosch Power Tools				1 609 92A 23R | (25.11.15)

OBJ_BUCH-839-005.book Page 4 Wednesday, November 25, 2015 3:48 PM

4 |

1 2

3

9 8

7

10

6

4

					5	GDR 18 V-LI
						Professional
A	GDR ...	1	2	B	GDS ...
						1
	11					14
	12			13
	13
1 609 92A 23R | (25.11.15)						Bosch Power Tools

OBJ_BUCH-839-005.book Page 5 Wednesday, November 25, 2015 3:48 PM
				| 5
C	GDX ...		D
	1	2
14
			7	7
	11
	12		13
	13
E
			15
			16
Bosch Power Tools				1 609 92A 23R | (25.11.15)

OBJ_BUCH-839-005.book Page 6 Thursday, July 14, 2016 2:27 PM

6 | English

English

Safety Notes

General Power Tool Safety Warnings

WARNING	Read all safety warnings and all in-
	structions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

Battery tool use and care

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

	1 609 92A 23R | (14.7.16)				Bosch Power Tools

OBJ_BUCH-839-005.book Page 7 Thursday, July 14, 2016 2:27 PM

When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Warnings for Impact Wrenches

Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.

Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.

Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture. Danger of explosion.

In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.

Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload.

Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. When using other batteries, e. g. imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries.

English | 7

Product Description and Specifications

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Intended Use

The machine is intended for driving in and loosening screws and bolts as well as for tightening and loosening nuts within the respective range of dimension.

Product Features

The numbering of the product features refers to the illustration of the machine on the graphics page.

1 Tool holder

2 Locking sleeve

3 Carrying strap

4 Belt clip *

5 Battery pack *

6 Battery unlocking button *

7 Rotational direction switch

8 On/Off switch

9 “PowerLight”

10Handle (insulated gripping surface)

11Screwdriver bit with ball catch *

12Universal bit holder *

13Screwdriver bit *

14Application tool (e. g. an impact socket) *

15Carbon brushes

16Cover lid

*Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.

Technical Data

		Cordless Impact Screwdriver					GDR 14,4 V-LI	GDR 18 V-LI
		Article number					3 601 JA1 4..	3 601 JA1 3..
		Rated voltage			V=	14.4		18
		No-load speed			min-1		0 – 2800	0 – 2 800
		Impact rate			min-1		0 – 3200	0 – 3 200
		Maximum torque, hard screwdriving application
		according to ISO 5393			Nm	150*		160*
		Bolt size			mm		M6 – M14	M6 – M14
		Tool holder					¼" hexagon socket	¼" hexagon socket
		Weight according to EPTA-Procedure 01:2014			kg	1.4 - 1.7*		1.5 - 1.9*
		Bosch Power Tools						1 609 92A 23R | (14.7.16)

OBJ_BUCH-839-005.book Page 8 Thursday, July 14, 2016 2:27 PM

8 | English

Cordless Impact Screwdriver		GDS 14,4 V-LI	GDS 18 V-LI
Article number		3 601 JA1 T..	3 601 JA1 S..
Rated voltage	V=	14.4	18
No-load speed	min-1	0 – 2800	0 – 2 800
Impact rate	min-1	0 – 3200	0 – 3 200
Maximum torque, hard screwdriving application
according to ISO 5393	Nm	170*	180*
Bolt size	mm	M6 – M16	M6 – M16
Tool holder		 ½"	 ½"
Weight according to EPTA-Procedure 01:2014	kg	1.4 - 1.7*	1.5 -1.9*

Cordless Impact Screwdriver		GDX 14,4 V-LI	GDX 18 V-LI
Article number		3 601 JB8 0..	3 601 JB8 1..
Rated voltage	V=	14.4	18
No-load speed	min-1	0 – 2800	0 – 2 800
Impact rate	min-1	0 – 3200	0 – 3 200
Maximum torque, hard screwdriving application
according to ISO 5393	Nm	150*	160*
– ¼" hexagon socket
–  ½"	Nm	170	180
Bolt size	mm	M6 – M16	M6 – M16
Tool holder		¼" hexagon socket /  ½"	¼" hexagon socket /  ½"
Weight according to EPTA-Procedure 01:2014	kg	1.5 - 1.7*	1.5 - 2.0*
*dependent of the battery pack being used

Assembly

Battery Charging

Use only the battery chargers listed on the accessories page. Only these battery chargers are matched to the lithium ion battery of your power tool.

Note: The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time.

The Lithium-Ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not damage the battery.

The Lithium-Ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates.

Do not continue to press the On/Off switch after the machine has been automatically switched off. The battery can be damaged.

The battery is equipped with a NTC temperature control which allows charging only within a temperature range of between 0 ° C and 45 ° C. A long battery service life is achieved in this manner.

Observe the notes for disposal.

Removing the battery

The battery 5 is equipped with two locking levels that should prevent the battery from falling out when pushing the battery unlocking button 6 unintentionally. As long as the battery is inserted in the power tool, it is held in position by means of a spring.

To remove the battery 5, press the unlocking button 6 and pull out the battery toward the front. Do not exert any force.

Changing the Tool (see figure A— C)

Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool.

There is danger of injury when unintentionally actuating the On/Off switch.

Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.

	1 609 92A 23R | (14.7.16)				Bosch Power Tools

OBJ_BUCH-839-005.book Page 9 Thursday, July 14, 2016 2:27 PM

GDR 14,4 V-LI / GDR 18 V-LI /GDX 14,4 V-LI /GDX 18 V-LI: Inserting

Pull the locking sleeve 2 forward, push the insert tool to the stop into the tool holder 1 and release the locking sleeve 2 to lock the insert tool.

Use only screwdriver bits with ball catch 11 (DIN 3126E6.3). Other screwdriver bits 13 can be used with a universal bit holder with ball catch 12.

Removing

Pull the locking sleeve 2 forward and remove the insert tool.

GDS 14,4 V-LI / GDS 18 V-LI / GDX 14,4 V-LI / GDX 18 V-LI:

When working with an application tool, pay attention that the application tool is connected securely on the tool holder. When the application tool is not securely connected with the tool holder, it can come off during application.

Slide the application tool 14 onto the square drive of the tool holder 1.

However based on the system, if the application tool 14 appears wobbly after connecting securely on the tool holder 1; this has no influence on the function/safety.

Operation

Method of Operation

The tool holder 1 with the tool is driven by an electric motor via a gear and impact mechanism.

The working procedure is divided into two phases: Screwing in and tightening (impact mechanism in action).

The impact mechanism is activated as soon as the screwed connection runs tight and thus load is put on the motor. In this instance, the impact mechanism converts the power of the motor to steady rotary impacts. When loosening screws or nuts, the process is reversed.

Starting Operation

Inserting the battery

Use only original Bosch lithium ion batteries with the voltage listed on the nameplate of your power tool.

Using other batteries can lead to injuries and pose a fire hazard.

Set the rotational direction switch 7 to the centre position to protect the power tool against accidental starting.

Insert the charged battery 5 from the front into the base of the power tool until the battery is securely locked.

Reversing the rotational direction (see figure D)

The rotational direction switch 7 is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch 8 actuated.

Right rotation: For driving in screws and tightening nuts, press the rotational direction switch 7 through to the left stop.

Left Rotation: For loosening and unscrewing screws and nuts, press the rotational direction switch 7 through to the right stop.

English | 9

Switching On and Off

To start the machine, press the On/Off switch 8 and keep it pressed.

The power light 9 lights up when the On/Off switch 8 is slightly or completely pressed, and allows the work area to be illuminated when lighting conditions are insufficient.

To switch off the machine, release the On/Off switch 8.

Adjusting the Speed

The speed of the switched on power tool can be variably adjusted, depending on how far the On/Off switch 8 is pressed.

Light pressure on the On/Off switch 8 results in a low rotational speed. Further pressure on the switch results in an increase in speed.

Working Advice

Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can slip off.

The torque depends on the impact duration. The maximum achieved torque results from the sum of all individual torques achieved through impact. The maximum torque is achieved after an impact duration of 6 – 10 seconds. After this duration, the tightening torque is increased only minimally.

The impact duration is to be determined for each required tightening torque. The actually achieved tightening torque is always to be checked with a torque wrench.

Screw Applications with Hard, Spring-loaded or Soft Seat

When in a test, the achieved torques in an impact series are measured and transferred into a diagram, resulting in the curve of a torque characteristic. The height of the curve corresponds with the maximum reachable torque, and the steepness indicates the duration in which this is achieved.

A torque gradient depends on the following factors:

–Strength properties of the screws/nuts

–Type of backing (washer, disc spring, seal)

–Strength properties of the material being screwed/bolted together

–Lubrication conditions at the screw/bolt connection

The following application cases result accordingly:

–A hard seat is given for metal-to-metal screw applications with the use of washers. After a relatively short impact duration, the maximum torque is reached (steep characteristic curve). Unnecessary long impact duration only causes damage to the machine.

–A spring-loaded seat is given for metal-to-metal screw applications, however with the use of spring washers, disc springs, studs or screws / nuts with conical seat as well as when using extensions.

–A soft seat is given for screw applications, e. g., metal on wood or when using lead washers or fibre washers as backing.

For a spring-loaded seat as well as for a soft seat, the maximum tightening torque is lower than for a hard seat. Also, a clearly longer impact duration is required.

	Bosch Power Tools				1 609 92A 23R | (14.7.16)

OBJ_BUCH-839-005.book Page 10 Thursday, July 14, 2016 2:27 PM

10 | English

Reference Values for Maximum Screw/Bolt Tightening Torques

Calculated from the tensional cross-section; utilization of the yield point 90 % (with friction coefficient μtotal = 0.12). As a control measure, always check the tightening torque with a torque wrench.

Property Classes	Standard Screws/Bolts								High-strength Bolts
according to DIN 267	3.6	4.6	5.6	4.8	6.6	5.8	6.8	6.9	8.8	10.9	12.9
M 6	2.71	3.61	4.52	4.8	5.42	6.02	7.22	8.13	9.7	13.6	16.2
M 8	6.57	8.7	11	11.6	13.1	14.6	17.5	19.7	23	33	39
M 10	13	17.5	22	23	26	29	35	39	47	65	78
M 12	22.6	30	37.6	40	45	50	60	67	80	113	135
M 14	36	48	60	65	72	79	95	107	130	180	215
M 16	55	73	92	98	110	122	147	165	196	275	330

Tips

Before screwing larger, longer screws into hard materials, it is advisable to predrill a pilot hole with the core diameter of the thread to approx. 2/3 of the screw length.

Note: Pay attention that no metal particles enter the power tool.

Belt Clip

With the belt clip 4, the machine can be hung onto a belt. The user has both hands free and the machine is always at hand.

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.

Store the battery only within a temperature range between 0 ° C and 50 ° C. As an example, do not leave the battery in the car in summer.

Occasionally clean the venting slots of the battery using a soft, clean and dry brush.

A significantly reduced working period after charging indicates that the battery is used and must be replaced.

Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool.

There is danger of injury when unintentionally actuating the On/Off switch.

For safe and proper working, always keep the machine and ventilation slots clean.

Replacing the Carbon Brushes (see figure E)

Check the length of the carbon brushes approx. every

2 – 3 months and replace the carbon brushes if required. Never replace only a single carbon brush!

Note: Use only carbon brushes supplied by Bosch and intended specifically for your product.

–Unscrew the caps 16 using a suitable screwdriver.

–Replace the spring-loaded carbon brushes 15 and screw the caps back on again.

If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for Bosch power tools.

In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions concerning our products and their accessories.

People’s Republic of China China Mainland

Bosch Power Tools (China) Co., Ltd. 567, Bin Kang Road

Bin Jiang District 310052 Hangzhou, P. R. China

Service Hotline: [phone] Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.cn

HK and Macau Special Administrative Regions

Robert Bosch Hong Kong Co. Ltd. 21st Floor, 625 King’s Road North Point, Hong Kong

Customer Service Hotline: [phone] Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.hk

Indonesia

PT. Multi Mayaka

Kawasan Industri Pulogadung

Jalan Rawa Gelam III No. 2

Jakarta 13930

Indonesia

Tel.: [phone]

Fax: [phone] / 6823

E-Mail: [e-mail]

www.bosch-pt.co.id

	1 609 92A 23R | (14.7.16)				Bosch Power Tools

OBJ_BUCH-839-005.book Page 11 Thursday, July 14, 2016 2:27 PM

Philippines

Robert Bosch, Inc.

28th Floor Fort Legend Towers, 3rd Avenue corner 31st Street, Fort Bonifacio Global City, 1634 Taguig City, Philippines Tel.: [phone]

Fax: [phone] [e-mail] www.bosch-pt.com.ph

Bosch Service Center: 9725-27 Kamagong Street San Antonio Village

Makati City, Philippines Tel.: [phone] Fax: [phone]

[e-mail]

Malaysia

Robert Bosch (S.E.A.) Sdn. Bhd. No. 8A, Jalan 13/6

G.P.O. Box 10818 46200 Petaling Jaya Selangor, Malaysia Tel.: [phone] Fax: [phone]

[e-mail] Toll-Free: 1800 880188 www.bosch-pt.com.my

Thailand

Robert Bosch Ltd. Liberty Square Building No. 287, 11 Floor Silom Road, Bangrak Bangkok 10500

Tel.: [phone] – 18 88 (10 lines) Fax: [phone]

Robert Bosch Ltd., P. O. Box 2054 Bangkok 10501, Thailand

Bosch Service – Training Centre 2869-2869/1 Soi Ban Kluay

Rama IV Road (near old Paknam Railway) Prakanong District

10110 Bangkok Thailand

Tel.: [phone] – 4 Fax: [phone] Fax: [phone]

Singapore

Robert Bosch (SEA) Pte. Ltd. 11 Bishan Street 21 Singapore 573943

Tel.: [phone]

Fax: [phone] [e-mail] Toll-Free: 1800 3338333 www.bosch-pt.com.sg

English | 11

Vietnam

Robert Bosch Vietnam Co. Ltd 10/F, 194 Golden Building 473 Dien Bien Phu Street Ward 25, Binh Thanh District 84 Ho Chi Minh City

Vietnam

Tel.: [phone] ext. 413 Fax: [phone] [e-mail] www.bosch-pt.com

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: [phone]

Fax: [phone]

Inside New Zealand:

Phone: [phone]

Fax: [phone]

Outside AU and NZ:

Phone: [phone]

www.bosch.com.au

Transport

The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The user can transport the batteries by road without further requirements.

When being transported by third parties (e.g.: air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.

Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe possibly more detailed national regulations.

Disposal

The machine, rechargeable batteries, accessories

and packaging should be sorted for environmentalfriendly recycling.

Do not dispose of power tools and batteries/rechargeable batteries into household waste!

Battery packs/batteries:

Li-ion:

Please observe the instructions in section “Transport”, page 11.

Subject to change without notice.

	Bosch Power Tools				1 609 92A 23R | (14.7.16)

OBJ_BUCH-839-005.book Page 12 Thursday, July 14, 2016 2:27 PM

12 |

!

" "

 发事故。

 尘或气体。

 中会使操作者失去对工具的控制。

/

 遗留在电动工具旋转零件上的扳手或钥匙会导致人 身伤害。

 长发可能会卷入运动部件中。

 尘屑引起的危险。

 更安全。

 且必须进行修理。



 如果你身体接地会增加电击危险。

 电动工具将增加电击危险。

部件。

 接软线。

 使用剩余电流动作保护器RCD RCD

 瞬间的疏忽会导致严重人身伤害。

 是危险的。

 事故由维护不良的电动工具引发。

 刃的刀具不易卡住而且容易控制。

 那些与其用途不符的操作可能会导致危险。

 盒的充电器用到其他电池盒时会发生着火危险。



燃烧或火灾。

	1 609 92A 23R | (14.7.16)				Bosch Power Tools

OBJ_BUCH-839-005.book Page 13 Thursday, July 14, 2016 2:27 PM

 生腐蚀或燃烧。

 性。

 造成操作者触电。

 比用手持握工件更牢固。

 工具。

 池散发的蒸汽会刺激呼吸道。

 才能确保蓄电池不会过载。

 有受伤的危险以及因为蓄电池爆炸而造成的财物损 失。

| 13

火灾并且/

放松规定尺寸内的螺母。

1

2

3

4 *

5 *

6 *

7

8

9 " "

11*

12*

13*

14*

*

		/					GDR 14,4 V-LI	GDR 18 V-LI
							3 601 JA1 4..	3 601 JA1 3..
				=			14,4	18
				/			0 –2800	0 –2800
				/			0 –3200	0 –3200
		ISO 5393					150*	160*
							M6 – M14	M6 – M14
							¼"	¼"
		EPTA-Procedure 01:2014					1,4 - 1,7*	1,5 - 1,9*
		/					GDS 14,4 V-LI	GDS 18 V-LI
							3 601 JA1 T..	3 601 JA1 S..
				=			14,4	18
				/			0 –2800	0 –2800
		Bosch Power Tools						1 609 92A 23R | (14.7.16)

OBJ_BUCH-839-005.book Page 14 Thursday, July 14, 2016 2:27 PM

14 |

	/		GDS 14,4 V-LI	GDS 18 V-LI
		/	0 –3200	0 –3200
	ISO 5393		170*	180*
			M6 – M16	M6 – M16
			 ½"	 ½"
	EPTA-Procedure 01:2014		1,4 - 1,7*	1,5 - 1,9*
	/		GDX 14,4 V-LI	GDX 18 V-LI
			3 601 JB8 0..	3 601 JB8 1..
		=	14,4	18
		/	0 –2800	0 –2800
		/	0 –3200	0 –3200
	ISO 5393
	– ¼"		150*	160*
	–  ½"
			170	180
			M6 – M16	M6 – M16
			¼" / ½"	¼" / ½"
	EPTA-Procedure 01:2014		1,5 - 1,7*	1,5 - 2,0*
	*

 工具上的锂离子蓄电池的专用充电器。

功率。

" (ECP)"

 可能损坏电池。

NTC-0 45

5 6

5 6

( A –C)

 能造成伤害。

GDR 14,4 V- LI/GDR 18 V- LI/GDX 14,4 V- LI/ GDX 18 V- LI:

2 12

11

(DIN 3126- E6.3)12 13

2

	1 609 92A 23R | (14.7.16)				Bosch Power Tools

OBJ_BUCH-839-005.book Page 15 Thursday, July 14, 2016 2:27 PM

GDS 14,4 V- LI/GDS 18 V- LI/GDX 14,4 V- LI/ GDX 18 V- LI:

 能在拧转螺丝时松脱。

14 1

14 1; /

| 15

/

8

8 9

8

8

1

反向进行。

7

5 ,

D

78

7

/7

8

/

冲击所产生的单一扭力的总和。在冲击约6 – 10

扭力。上升的线段则代表到达最大扭力所须的时间。 扭力曲线的演变会受以下因素影响

–/

– 时间只会损坏机器。

90 % μ = 0,12

		DIN 267
				3.6	4.6	5.6	4.8	6.6	5.8	6.8	6.9	8.8	10.9	12.9
		M 6		2.71	3.61	4.52	4.8	5.42	6.02	7.22	8.13	9.7	13.6	16.2
		M 8		6.57	8.7	11	11.6	13.1	14.6	17.5	19.7	23	33	39
		M 10		13	17.5	22	23	26	29	35	39	47	65	78
		M 12		22.6	30	37.6	40	45	50	60	67	80	113	135
		M 14		36	48	60	65	72	79	95	107	130	180	215
		Bosch Power Tools										1 609 92A 23R | (14.7.16)